Screen frozen with no backup CD

Similar Questions

• Screen frozen with lines

  Whenever my computer froze, the screen showed several lines on the screen (lines vary whenever I was on, i.e. Internet or Microsoft Word) and the bottom of the mouse is also affected.

  I try everything I can to make sensitive it works however anything so the only option I have is to manually turn off my computer and turn it back on.

  What has happened since Tuesday and it was a problem that concerns me. What are my options to resolve this problem?

  Go to your computer/laptop Web site or the manufacturer of the graphics card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Download the latest graphics drivers.

  If the problem persists, it may be lack of graphics card, or if onboard graphics hardware.

  See you soon.

  Mick Murphy - Microsoft partner

• IPhone SE lights not after an appearance at the screen frozen, faded and an attempt to hard reset.

  I just took the new smartphone Iphone SE in April 2016. It worked perfectly fine for the months that I had it until last night. I was recording playing me the guitar, when I put the phone down with the camera open for a few seconds. When I went to get the phone upwards, the screen was frozen and colors have been melted. The multicolored lines appeared as well. I tried to close the application by pressing the home button, and when I tried to press the sleep button to access the lock screen, the phone went black. When I went to press the sleep button to access the lock screen, the phone opens the same screen frozen, multicolored as before. I panicked and hard reset the phone. I turn on is no longer the phone. No apple logo appears, as well as logos 'connect to Itunes '. I tried to restore the phone to factory via Itunes, but it was without result.

  Surprisingly, when I went to restore the phone, the second time, serial number has changed from a game of numbers and letters invalid "s/o," as if Itunes is no longer permitted to detect it as an iPhone. In addition, the phone is now considered as a completely new system on Itunes, which I don't know is normal.

  I made an appointment with the Applestore for tomorrow, but I would like to comment on what someone thinks that this problem could be. I have not tried to Jailbreak the phone somehow, but have the feeling that my phone may have been hacked, or perhaps he is being malicious programs? Maybe it's a motherboard problem or display?

  Any comments would be greatly appreciated.

  -B.S.

  I made an appointment with the Apple store for tomorrow, but I would like to comment on what someone thinks that this problem could be. I have not tried to Jailbreak the phone somehow, but have the feeling that my phone may have been hacked, or perhaps he is being malicious programs? Maybe it's a motherboard problem or display?

  Your phone is not hacked and all the malware only you could catch is malicious cookies in Safari or other browsers that are removed easily by clearing their cache. I suspect you have a hardware problem, nothing more, that should solve the Apple store.

• HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

  HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

  Hello

  Please do not type in capital letters because it's difficult to read and considered to be shouting.

  ---------------------------------------------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive download collected files and after shot/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  The system has RAID? If so, it's also very suspicious.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E which is also 0x1000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  ----------------------------------------------------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• A Mac, two Capsules of time with different backups

  I have a second gen Time Capsule, which contains my Time Machine backup. I recently bought a 5th generation Time Capsule with the intention to create a new backup, but also be able to keep intact the first.

  I need to be able to release all the space of my MacBook Pro, but also want to be able to access it on the backup of the second generation of TC, but have the 5th generation TC be my new backup every day.

  I was wondering how to fix this without screwing up my current data?

  Any ideas would be appreciated.

  You can do what you want.

  Copy the sparsebundle to the old TC to the new... and rename it so it does not interfere with the backup.

  Our experience has been to advise against it. Especially it wastes just space.

  I need to be able to release all the space of my MacBook Pro, but also want to be able to access it on the backup of the second generation of TC, but have the 5th generation TC be my new backup every day.

  If you move files to the TC 2nd Gen, they will be totally lost when the TC fails, which could be tomorrow... it should have been 5 years ago. They proved unreliable due to the overheating and poor diet.

  Strongly recommend against it doing so.

  Copy your files on a USB connected directly to the laptop. You can then run a backup through TM to the new TC.

  The old TC is not worth including somehow.

• a lot of time, I click on Firefox, also a compatibility of add-on runs after a few moments, the screen fills with Firefox Android adds; It's embarrassing. How

  The last update of Mozilla change the way my computer starts when I click on Mozilla on the desktop. The first think what will happen is that a small window appears and tells me it is to check for the compatibility of modules. After what seems like a long time, the screen fills with a sort of Mozilla on Android and Mozilla. I must then x to access my email page. It's embarrassing. How can I fix it?

  Firefox says it's just updated each time that it starts - how to fix

  It looks like this problem.

• TOSHIBA HDD STOR. E partner 750Go PA4280E - 1 HG 5 - problem with the backup software

  Hello everyone

  I recently bought an external hard drive TOSHIBA HDD STOR. E partner 750Go (PA4280E - 5 1HG) with preinstalled backup software Nero BackItUp & Essentials. Unfortunately the software does not work. When I double-click on it to start it, it starts to extract, but after a growth of 10%, there is an error message saying something like "data error".

  How can I get the software? Or where can I get new software that works?

  Thanks in advance for your help
  Aniona

  As far as I know, the software can be downloaded from Nero.com

  Check this box:
  http://APS2.toshiba-tro.de/KB0/TSB14034U0000R01.htm

• Satellite A300 PSAG4A screen frozen using Photoshop

  I got a PSAG4A A300 - 02600M

  I turned on the computer today and all using Photoshop, the frooze the screen upward with interference on the screen. I had to manually restart the computer to get rid of. I also noticed that the graphics on the screen showed not degraded properly

  In addition, the mouse pad was running too much hot and so I think that there is possibly a problem with the cooling fan.

  So what is this something guaranteed covered?

  > I turned on the computer today and all using Photoshop, the frooze the screen upward with interference on the screen. I had to manually restart the computer to get rid of.
  It often? I mean is this repetitive problem?
  If this isn't the case, then I wouldn't be worried. These issues can occur. My laptop's OS freezes from time to time. Please don t understand me wrong. computer laptop doesn't hang every time but maybe once a month.

  However, what I like to say is that the OS could sometimes crashes due to different reasons so OS if it doesn t happen all too often, you should t be worried.

  With respect to the surface of the touchpad.
  This is nothing unusual. The surface of the touchpad is still a bit warmer that other surfaces of s for laptop. This happens because of the warm welcome inside the laptop cooling modules.

  Welcome them

• frozen with only symbol of iTunes

  I have an ipad2.   It is frozen with a side of iTunes and also with what looks like a picture of the charger cable.  Any way out of this mess?

  Hope you can help.

  Thank you

  Jakes

  The icon image and cable iTunes means there is spent in recovery mode - if you are connecting your computer to iTunes it should recognize that and allow you to reset to the factory settings, and you can restore/resync your content

• Cannot open programs directly, goes to a screen "open with."

  I am trying to open a Microsoft Works Task Launcher and it goes to a screen "open with." How can I fix it?

  Hello

  This problem occurs when your .exe file associations are broken. This is usually caused by malicious software that changes the default file associations in Windows. Follow these instructions to resolve this problem:
  Download exeHelper from one of these two links: link 1, link 2 double-click exeHelper to run the fix. A black window should appear. Once the patch is finished, press any key to close.

  Then try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide

  It contains instructions which will remove most malware infections. If you have any questions, just ask me. I hope this helps you.

  Brian

• Administrators password has expired and I can't seem to change even with a backup drive

  original title: password expiration

  OK so my administrators password has expired and I can't seem to change even with a backup disk can anyone help me pleasssseeee!

  Hello

  ·         Your computer is on a domain?

  If the computer is on a domain, you may need to contact the system administrator for the renewed password.

  Microsoft cannot help you recover passwords for Microsoft who are lost or forgotten products. You can go through the article below.
  "Microsoft's strategy concerning lost or forgotten passwords"

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get a screen blue with the Dell logo on it and no office mouse pointer or even. __

  Remember - this

  Only, I get a screen blue with the Dell logo on it and no office mouse pointer or even.

  is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Check with Dell to see if there is a disc of diagnosis of material that you can download or order for your computer to test and see why it is not booting.  Also check the LEDs on the front that can display a code error, or for a series of beeps which may indicate an error code.

  "Arlingtonal" wrote in the new message: * e-mail address is removed from the privacy... *

  * Remember - this *.

  I get a screen blue with the Dell logo on it and no office or even the mouse pointer.*

  is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  * You have problems with programs
  * Error messages
  * These recent changes made to your computer
  * What have you tried to solve the problem

• Error occurred in making the disc of recovery with Dell backup and recovery

  Mr President.

  When I was doing a System recovery DVD with Dell backup and recovery when all steps were completed and finally when he was checking the disc a dialog box appears showing "AN ERROR has OCCURRED". How to get rid of this error?

  Please answer fast. Any suggestions will be appreciated

  Thank you

  Hey Himanshu Teli,

  Please provide the model of your operating system and Dell. I would also recommend that you try a flash instead of a DVD disc.

• (blue screen) BUGCODE_USB_DRIVER with * STOP: 0X000000FE

  (blue screen) BUGCODE_USB_DRIVER with * STOP: 0X000000FE

  Hello
  I have Hp pavilion dm4 laptop computer with windows 7.
  Since last one I get a blue screen with error message over and over again. I've updated the BIOS and test HDD
  and tests of memory but not able to draw any conclusions.
  Please help me...

  Here is the error description...

  A problem has been detected and windows has been shut down to avoid damage
  on your computer.

  BUGCODE_USB_DRIVER

  If this is the first time you've seen this stop error screen,
  Restart your computer. If this screen appears again, follow these steps:

  Check to make sure any new hardware or software is installed correctly.
  If this is the new installation, ask your hardware manufacturer or software for windows updates you might need.

  If the following problem, disable or remove any newly installed hardware
  or software. Disable the BIOS memory options such as implementing caching or shading.
  If you need to use safe mode to remove or disable components, restart
  your computer, press F8 to select advance startup options,
  then select Safe mode.

  Technical information:

  STOP: 0X000000FE (0 X 0000000000000008, 0 X 0000000000000006, 0 X 0000000000000005, 0
  XFFFFA800760A7A0)

  Thank you
  Mansi

  Hello

  Check with HP Support, their drivers and documentation online and ask in their forums
  about known issues with this model.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =====================================================================

  Do not forget to check with the manufacturer of system support (or motherboard for custom systems manufacturer)
  and their forums (if any) for known issues.

  Check these KB Articles that "pourraient" apply.

  Stop 0xFE peripheral sleep or Hibernate with USB streaming output
  http://support.Microsoft.com/kb/974303

  "Stop 0x9F" error or "Stop 0xFE" on a Windows 7 or Windows Vista-based computer that
  use some USB AMD EHCI host controllers
  http://support.Microsoft.com/kb/982091

  Error "STOP 0x000000FE" in Windows 7 or in Windows Server 2008 R2 when the computer enters
  or recovery mode sleep (S3) or from hibernation (S4)
  http://support.Microsoft.com/kb/974410

  Those 4 other KB Articles are available (from the date of this reply)
  http://support.Microsoft.com/search/default.aspx?mode=a&query=0x000000FE&SPID=14019&catalog=LCID%3D1033&RES=10

  ============================================================

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  You can solve these yourself using BlueScreenView, MyEventViewer and other methods
  in this thread. Don't forget to use MyEventViewer to check at the time of the BSOD or less than a second
  in front of them to see if something is useful in the event viewer. Top 3 responses (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Although the control of bug 0xFE: BUGCODE_USB_DRIVER indicates generally material it could easily
  be a connected USB device and not a system USB device. And you can never really exclude drivers.

  BCCode: FE 0x000000FE<-- read="" this="">
  http://www.faultwire.com/solutions-fatal_error/BUGCODE-USB-driver-0x000000FE-* 1251.html? = date order

  --------------------------------------------------------------------------------------

  Is it a Windows 7 upgrade installation or Windows 7 comes on the factory system?

  A possible cause can be updated to Windows, including pilots. Even the drivers are generally not considered as the
  USB-related, such as video/display, network (NIC & WiFI) and others, may be the cause.

  Especially Norton, Kaspersky, McAfee, SpyBot, Adaware and others may cause or have a role
  in this issue. Try to uninstall it to see if that helps. Use the removal of their creator tools and/or
  Special instructions. (Antivirus/antispyware/security programs)

  ----------------------

  Remove all THE USB devices on the computer. Don't forget to search the drivers updated for all USB
  devices.

  References to Vista also apply to Windows 7.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for all hidden devices / people with disabilities
  (can have zero or more than one) and top - right click UNINSTALL.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick three 1
  are there choices to see if any.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  =======================================

  After the above, attach a USB device at a time to see if any cause the issue.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Screen black with error number but Messages lcd fan turns on and the hard drive makes noises.

  HP Pavilion tx2510us

  I did the hard reset, but still have a blank black screen.

  Put a new hard drive.

  Verified the memory also.

  Now what should I do?

  Hello

  Have you tried reseating the memory modules one at a time? Reinstalling the hard drive can also help.

  Just check out the link below and check if something is missed...

  HP Notebook PC - troubleshooting screens black with no start-up or start-up error message