Message 'Unfair Machine' on Satellite M60 during the recovery procedure

Similar Questions

• Satellite M45-S269 - A:\GHOST output. ERR during the recovery procedure

  I am trying to perform a full system restore. I get to the part that says "exit A:\GHOST. MADE A MISTAKE? »

  If I do Y or N the message says "cannot read files. If the problem persists, contact TOSHIBA support center or contact symantec technical support.
  Then the recovery fails.

  Clues?

  Hello

  Looks like it's not possible to read from the recovery disc.
  How did you perform the recovery procedure?

  You have inserted the right recovery disk and started from this disk. Right?
  Usually, recovery is expected to begin and the installation should run smoothly

  If this is not the case then recovery disks would be destruction, scratched, etc.

  Just a question; is it possible to start using other disk bootable CD original Win XP or Linux?
  Select this check box, because it would allow to discover exactly what s wrong

• Satellite 1100 keyboard froze during the recovery procedure

  I want to restart my 1100 satellite using the recovery CD. Unfortunately, I put in the wrong CD and the keyboard froze. When I start I press F2 to "start-up" but can't do anything after that.
  Any ideas how I can unlock things and back to normal?

  Hello

  Put the recovery CD in the CD/DVD player, turn on the laptop and immediately press the C button. keep it down for a few seconds and this will force to laptop to start select the CD/DVD drive as the first boot device.

• BSOD appears on Qosmio G30 during the recovery procedure

  Hello

  I have a Qosmio G30 and I want to format it and return to the out-of-the-box state...
  Unfortunately came with the laptop recovery CD doesn't seem to work...

  Whenever I try to boot from the DVD, it says "windows is loading files" and once this is done, it shows me the so-called "blue screen of death"...
  Is it possible that I can get another CD or make this work?

  Or remove RAID protection or anything that prevents me to install a fresh Windows VistaMD?

  Hello

  Of course, it of possible to order a new recovery CD, but I doubt that this problem could be related to a faulty recovery CD. But this is only my personal opinion and everything is possible.

  You have a clean Windows operating system?
  If so, try to boot from your original Windows CD and try to reinstall the operating system.

  The Qosmio G30 laptop supports RAID and you need to include the RAID driver by pressing the F6 key during the Windows Setup process.
  I think it would be useful to know if an installation of the OS to another CD is possible.

  Second question; have you changed the RAID settings in the BIOS?

• Satellite A100-153: Error Message appears during the recovery procedure

  Hello
  Please help me!

  I tried to recover my laptop with my original Toshiba recovery cd, but decompression 14% I got an error.., named:
  Windows - delayed write failed
  Windows was unable to save all the data for the file\Device\Harddisk\volume2\I386\OEMBIOS. Bl_. The data has been lost.
  This error can be caused by a failure of your computer hardware connection or a network. Please try to save this file elsewhere.

  So I don't know what to do...
  Is the problem that my hard drive is broken? but I don't think, because when I install with Windows XP Home Edition OEM I come up to 91% and then comes another error :((

  Please help me, anyone know what I can do?

  Please answer quickly... I need my phone tomorrow :*(

  Welcome, Tobias Erdmann

  Hello

  I guess you have you used original restore CD that was shipped with this laptop. That's why I put t thinks it is a CD problem but maybe with your HARD drive.
  Have you tried to format the whole HARD drive? Delete all partitions and format the HARD drive before installation

  If the OS install will not work or will divide in the middle of the procedure, then the material should be checked. The A100 is not very old unit and therefore the guarantee must be valid. If a new HARD drive is necessary you should get it for free.

  Good luck and please post if you know more details

• Equium A100-147: I get an error during the recovery procedure

  Hi again,

  I had trouble with my equium a100-147.
  I tried a restore, but the disc is scratched so I phoned in ESL and it snet me a new recovery image.

  I tried the new recovery disk and am now errors when I boot the disk.

  error is

  "internal error crc file: \WINDOWS\$NtUninstallKB895200$\msdtctm.dl.

  any suggestions are welcome. get really annoyed with my machine as my warranty expired only one month

  Thank you

  Hmm... I studied a bit and it looks a bit like a malfunction of the partition.
  It would be desirable to boot from the original CD of Microsoft XP and to start the repair console.
  Then you could try these various commands which help to repair the boot manager, repair errors, locate bad sectors and recover readable information.

  -fixboot
  -fixmbr
  -bootcfg /rebuild
  -chkdsk /r

  If this does not help, you should erase the entire partitions and must format the HARD drive in NTFS file system. Then access the BIOS and set it to the default value.
  Once this procedure tries to start again on the new recovery CD!

  Good bye

• Portege 3500 - hangs on step 8 during the recovery procedure

  Hello, I've had the laptop less hard drive, I have istalled a HARD drive is appropriate, but the external CD-ROM drive, it is the good, is not recognized.

  I followed these instructions:
  http://support.toshiba-tro.de/KB0/TSB6101CA000ER02.htm

  Everything is going well, but after step 8, I get A prompt:------> _ with the last symbol flashing, I entered C then U but I get the message: bad command.

  Could someone help?
  Thanks Richard

  Hello Richard

  You have created a bootable floppy using the downloaded exe file?
  Step 8, you must start your laptop using the as first boot device floppy drive. To force the computer laptop to use as first bootable device external floppy drive, you can use the button U keyboard initially upwards.

  When the laptop starts up and you press the U key disk into the floppy drive connected will start to read the disc. Is it exactly how it happened?

• Satellite A100 - messages of weird info during the recovery process

  This is the first time I tried to recover my Vista PC from Toshiba.

  During the recovery, I got this in CMD

  "C:\boot(something here) restore s Descriptor." seq. 26 - SACL rest. "
  "C:\SWStamp.txt s restoration Descriptor. SEQ 25 - list SACL will not go away.

  (1) is this normal?
  (2) what it means?
  (3) I even did a FULL format?

  Thanks a lot guys

  Hello

  During the recovery process, you will see some messages, that's nothing unusual
  Important is that the procedure does not stop but continues and after some time, the Win operating system should complete the installation
  Wait a bit and see if the procedure would end...

  If the procedure to hang himself, then start recovery and boot from the disc reocvery...

• iMac14, 4 have message "Could not install Windows 10" during the update to build 11099.

  iMac14, 4 have message "Could not install Windows 10" during the update to build 11099 and get the error message "this device is not compatible on Windows 10. Contact the manufacturer for more information. (Network Broadcom 802.11ac adapter) ».

  Picture to describe the problem: http://i.imgur.com/H0SlKd6.jpg

  I think you need to contact Microsoft.

• Satellite A100 system goes to a black screen after the recovery procedure

  I tried running the recovery CD, I received on my cell phone. the process perfectly, (I have only one CD, I don't know if I need a second). At the end of the process, I have the option to insert the second CD, or jump.
  Because I don't have that one CD I have support on ignore.

  I tells me that the installation is complete and I can restart my system.
  Then I removed the disk and I tried to reboot the system. The system goes to a black screen (on which he indicates that Microsoft load) and then crashes. That was the problem I was facing before recovery.

  Basically, the recovery process has not worked. I don't think I did something very wrong, unless I need a second CD. What could be the problem?

  Help me please!

  Hello

  The A100 is one of the new series of laptops and AFAIK the image of Toshiba was placed only on a CD (DVD) recovery.
  I think that the message and the possibility to insert the second CDconfuses a little.

  In my opinion the black screen and freeze has nothing to do with the recovery procedure and the new installation if Windows OS.
  Due to the fact that this problem has occurred until you have installed the OS from the recovery CD, I assume that there must be something wrong with the hardware.

  But it s very interesting to know if the same problem appears after the new installation of Windows from the original CD of Microsoft.

  It's worth a try.

• Satellite A30: HDD size after the recovery procedure and Defrag

  I have a Satellite A30 and just did a complete reinstall from the recovery of the product disks. My question relates to the amount of disk space hard should be resumed aftre reinstall it.
  My hard drive is 4.95 full GB according to the procedure that is much higher than I expected.

  Also, after reviewing the reader with Defragmenter I seem to have twice taken up training with Greens, unmovable files like Blue contiguous files. Unmovable files is there and if not how to I remove them?

  It's where I guess that extra hard disk space is lost when it is lost?

  Thank you

  Hello

  It's not easy to say exactly how much space should be taken after the recovery procedure.
  I have so much that I know on the recovery CD, you will find the whole operating system Windows XP, driver Toshiba and utilities as well as additional software like OneNote, WinDVD, etc.
  This additional software could take as much space on the disk outside the OS.

  Blue not moveable files belong to the Windows operating system, and as a result, the files are placed together.

• How can I get windows vista? I get a message that PC is not supported by the recovery disks. Windows vista Home premium HP pavilion dv9310us

  How can I get windows vista? I get a message that PC is not supported by the recovery disks.  Windows vista Home premium HP pavilion dv9310us

  Hello

  This recovery software is part of the process of HP.

  Contact HP support

  http://WWW8.HP.com/us/en/support-drivers.html

  Or ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/PSG/

  See you soon.

• Satellite A100 loads the operating system correctly after the recovery procedure

  Hello

  I'm in trouble... I used the recovery CD last week after my laptop developed problems. After the recovery procedure, when I turn on the pc, it loads directly in mode 'Owner' - the pilot of the internet has no charge, Norton AV, supplied with the pc does not load. Basically, it's a shadow of his former self.

  And when I try and start the recovery process, that it doesn't... it does not read the disc.
  I know that the recovery process did not work properly cos when I look in C: it shows that 60 GB of data is present on the hard disk, so the recovery is not cleaned the hard drive at all.

  The only way I can describe it, is that the pc is in some sort of limbo. I can't access the original account I created.

  The recovery disk is still okay because I "explored" the drive on another computer and it contains all the data.

  Help, please.

  Looks a bit the problem I have with an A100 recovery disk. Mine formatted PC, unpack
  a load of stuff and then freezes.
  See...
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=31292

  Like you, I can read the DVD in another PC. I wonder if there is a batch of duff of recovery DVD?

  I think I'll try to install XP from a different installation disk. It'll be a bit of a pain in the neck
  because it will not authenticate with MS, but at least he's going to prove whether or not the hardware of the laptop is duff.

  I'll post back here when (if) I get anywhere.

• 'Bad Machine' error when I start the recovery on Satellite L10 media

  Hello...

  I have a Toshiba Satellite L10-103 and I want to make the recovery, since I have constant errors and my wireless does not work.

  When I put on CD, everything is ok, I press F12 and get the choice when I want to access computer. I select the CD/DVD drive. That produces the recovery starts and I get this error message:

  "Wrong Machine! This software is designed for personal computers TOSHIBA '

  What's wrong with it?

  Hello

  Are you sure that the recovery CD you are using is designed for Satellite L10 - 103 to 110%?
  Please check this!

  But if you use the same recovery CD that came with the laptop, and you still get the same error message, then the false DMI information that is stored on the motherboard might be responsible for this error message and might prevent to recover.

  This can occur if the motherboard has been replaced and that the technician has not updated the DMI string.

• IBM Thinkpad message: 'this machine can run faster with the USB 2.0 hub.

  Original title: Thinkpad USB 2.0 Hub.

  Hello:

  I have an IBM Thinkpad T-21 which is under Ubuntu & Windows xp.  I primarily use Windows XP.  The pop-up that keeps occurring is "this machine can run faster with the USB 2.0 hub.  Can you tell me how to upgrade my USB 2.0 Hub?  Would like to know because I can't sync my Android phone with my computer until I do it. Thank you.

  Are you sure you copied this error message properly?  In other words, he says that the hub could perform better if connected to a USB 2.0 port?  As far as I can determine that the T21 is not come with a USB 2.0 port, even if you connect a USB 2.0 device (for example a hub), the unit will only race as fast as the port allows it.

  What is the brand and model of your terminal?

  It is possible that the message means the opposite (i.e., your computer has a USB 2.0 port, but the hub is only a USB 1.1 device).

  USB 2.0 was introduced in 2001, so if you bought your computer before 2001, it is likely that you use USB 1.1 or 1.0.

  Open the Device Manager (start > run > devmgmt.msc > OK)
  Expand the category of 'USB Bus controllers'.
  If you see the "Enhanced" work for one or more of the listed devices, you have a USB 2.0 port.  If you do not see "Enhanced", you have USB 1.1.

  

  If the problem is that the USB port on the computer is not 2.0, so your only solution is to buy a USB 2.0 PC Card adapter.  Example and example 2
  If the problem is that the hub is not 2.0, then you will need to buy a new hub.