Satellite M45-S269 - A:\GHOST output. ERR during the recovery procedure

Similar Questions

• Satellite 1100 keyboard froze during the recovery procedure

  I want to restart my 1100 satellite using the recovery CD. Unfortunately, I put in the wrong CD and the keyboard froze. When I start I press F2 to "start-up" but can't do anything after that.
  Any ideas how I can unlock things and back to normal?

  Hello

  Put the recovery CD in the CD/DVD player, turn on the laptop and immediately press the C button. keep it down for a few seconds and this will force to laptop to start select the CD/DVD drive as the first boot device.

• Satellite Pro A10: Extraction failure error occurs during my recovery procedure

  Im trying to run recovery disks on my Satellite Pro A10 but after 20 seconds trying to install recovery disc 1 gose black screen and message in corner says extraction failed.

  Can you help me please?

  Have you tried to format and delete partitions on HARD drive integers before performing the installation from the recovery CD?

  Something similar happened to me. I wasn't able to install the OS from the recovery CD.
  I simply used the original Windows CD and you have formatted the whole HARD drive.
  After this procedure the recovery CD installation worked a lot.

• BSOD appears on Qosmio G30 during the recovery procedure

  Hello

  I have a Qosmio G30 and I want to format it and return to the out-of-the-box state...
  Unfortunately came with the laptop recovery CD doesn't seem to work...

  Whenever I try to boot from the DVD, it says "windows is loading files" and once this is done, it shows me the so-called "blue screen of death"...
  Is it possible that I can get another CD or make this work?

  Or remove RAID protection or anything that prevents me to install a fresh Windows VistaMD?

  Hello

  Of course, it of possible to order a new recovery CD, but I doubt that this problem could be related to a faulty recovery CD. But this is only my personal opinion and everything is possible.

  You have a clean Windows operating system?
  If so, try to boot from your original Windows CD and try to reinstall the operating system.

  The Qosmio G30 laptop supports RAID and you need to include the RAID driver by pressing the F6 key during the Windows Setup process.
  I think it would be useful to know if an installation of the OS to another CD is possible.

  Second question; have you changed the RAID settings in the BIOS?

• Satellite A100-153: Error Message appears during the recovery procedure

  Hello
  Please help me!

  I tried to recover my laptop with my original Toshiba recovery cd, but decompression 14% I got an error.., named:
  Windows - delayed write failed
  Windows was unable to save all the data for the file\Device\Harddisk\volume2\I386\OEMBIOS. Bl_. The data has been lost.
  This error can be caused by a failure of your computer hardware connection or a network. Please try to save this file elsewhere.

  So I don't know what to do...
  Is the problem that my hard drive is broken? but I don't think, because when I install with Windows XP Home Edition OEM I come up to 91% and then comes another error :((

  Please help me, anyone know what I can do?

  Please answer quickly... I need my phone tomorrow :*(

  Welcome, Tobias Erdmann

  Hello

  I guess you have you used original restore CD that was shipped with this laptop. That's why I put t thinks it is a CD problem but maybe with your HARD drive.
  Have you tried to format the whole HARD drive? Delete all partitions and format the HARD drive before installation

  If the OS install will not work or will divide in the middle of the procedure, then the material should be checked. The A100 is not very old unit and therefore the guarantee must be valid. If a new HARD drive is necessary you should get it for free.

  Good luck and please post if you know more details

• Message 'Unfair Machine' on Satellite M60 during the recovery procedure

  Hello.

  I would be very grateful if someone could offer me a solution or a Board with reinstalling Windows from the Toshiba product recovery DVD. After obtaining the motherboard on my Toshiba M60 (code PSM60A-0C7OOD) replaced I get the machine wrong message when I try to reinstall Windows.

  I read through the threads of the DMI was updated, but after trying to start the boot CD, I got the error message saying that 'no id of corresponding platform was found' and so am not able to do work. I don't know if it's because the Toshiba M60 is not supported by the dmi updates...

  I noticed that, in the Information System, the model of the system is listed as 0000000000000000000. Have I reason to think that this is the problem and if I could change that for the correct model number of product recovery DVD will work correctly.

  Thank you very much, Mike.

  Hello Mike

  I'm no expert, but as far as I know, a BAD MACHINE message will appear if the string DMI and the label on the image n t game. In my opinion, you should contact the service again and let write them DMI information. Obviously they forget.

• Equium A100-147: I get an error during the recovery procedure

  Hi again,

  I had trouble with my equium a100-147.
  I tried a restore, but the disc is scratched so I phoned in ESL and it snet me a new recovery image.

  I tried the new recovery disk and am now errors when I boot the disk.

  error is

  "internal error crc file: \WINDOWS\$NtUninstallKB895200$\msdtctm.dl.

  any suggestions are welcome. get really annoyed with my machine as my warranty expired only one month

  Thank you

  Hmm... I studied a bit and it looks a bit like a malfunction of the partition.
  It would be desirable to boot from the original CD of Microsoft XP and to start the repair console.
  Then you could try these various commands which help to repair the boot manager, repair errors, locate bad sectors and recover readable information.

  -fixboot
  -fixmbr
  -bootcfg /rebuild
  -chkdsk /r

  If this does not help, you should erase the entire partitions and must format the HARD drive in NTFS file system. Then access the BIOS and set it to the default value.
  Once this procedure tries to start again on the new recovery CD!

  Good bye

• Portege 3500 - hangs on step 8 during the recovery procedure

  Hello, I've had the laptop less hard drive, I have istalled a HARD drive is appropriate, but the external CD-ROM drive, it is the good, is not recognized.

  I followed these instructions:
  http://support.toshiba-tro.de/KB0/TSB6101CA000ER02.htm

  Everything is going well, but after step 8, I get A prompt:------> _ with the last symbol flashing, I entered C then U but I get the message: bad command.

  Could someone help?
  Thanks Richard

  Hello Richard

  You have created a bootable floppy using the downloaded exe file?
  Step 8, you must start your laptop using the as first boot device floppy drive. To force the computer laptop to use as first bootable device external floppy drive, you can use the button U keyboard initially upwards.

  When the laptop starts up and you press the U key disk into the floppy drive connected will start to read the disc. Is it exactly how it happened?

• Satellite A100 - messages of weird info during the recovery process

  This is the first time I tried to recover my Vista PC from Toshiba.

  During the recovery, I got this in CMD

  "C:\boot(something here) restore s Descriptor." seq. 26 - SACL rest. "
  "C:\SWStamp.txt s restoration Descriptor. SEQ 25 - list SACL will not go away.

  (1) is this normal?
  (2) what it means?
  (3) I even did a FULL format?

  Thanks a lot guys

  Hello

  During the recovery process, you will see some messages, that's nothing unusual
  Important is that the procedure does not stop but continues and after some time, the Win operating system should complete the installation
  Wait a bit and see if the procedure would end...

  If the procedure to hang himself, then start recovery and boot from the disc reocvery...

• Satellite A30: HDD size after the recovery procedure and Defrag

  I have a Satellite A30 and just did a complete reinstall from the recovery of the product disks. My question relates to the amount of disk space hard should be resumed aftre reinstall it.
  My hard drive is 4.95 full GB according to the procedure that is much higher than I expected.

  Also, after reviewing the reader with Defragmenter I seem to have twice taken up training with Greens, unmovable files like Blue contiguous files. Unmovable files is there and if not how to I remove them?

  It's where I guess that extra hard disk space is lost when it is lost?

  Thank you

  Hello

  It's not easy to say exactly how much space should be taken after the recovery procedure.
  I have so much that I know on the recovery CD, you will find the whole operating system Windows XP, driver Toshiba and utilities as well as additional software like OneNote, WinDVD, etc.
  This additional software could take as much space on the disk outside the OS.

  Blue not moveable files belong to the Windows operating system, and as a result, the files are placed together.

• Satellite A200 - 26J PSAE6E: No. HARD drive during the installation of XP

  Hay @ all. My name is ahmet.

  I'm from the Germany. I have a problem.

  I bought a toshiba laptop and I think it's a very good laptop.
  But I don't like Vista. It uses to much space, much grafic and a lot more.
  So I tried to install my old windows XP Professional sp2. Here's the problem:

  During installation, Xp procres say there is no hard drive.
  Hmm, I thought I should have a look on other forums. There, they said to integrate a sata driver on the xp cd.
  But I don't understand the using nLite to use.

  Could you show me how I had to reinstall my old XP?
  I have a lot of files to my laptop and I change some settings in Vista so that I could not use internet.
  If I want to reinstall vista with the recovery cd, it would remove all folders, photo ect.
  I use only my other old computer.

  I would be very happy if you could help me.
  Thank you very much!!! If you have an answer I would be too happy

  my system:

  Toshiba - Satellite A200-26J

  Modell Nr.
  PSAE6E-0F000HGR

  Technology

  Hello

  The nLite is a freeware program that helps you to integrate the SATA (Intel matrix Storage Manager) driver in the original XP operating system.

  If you want to know how to use nLite software, then glasses a bit.
  There are many websites that explain how to use nLite.

  (Driver SATA) Intel Storage Manager can be downloaded from the Toshiba driver page.

  Last month, I created a new XP CD using the nLite.
  I've included a few pilots, SP2 and some patches it of really not very difficult.

  As I said... Scope of protection is a key ;)

  Good bye

• Satellite Pro T2150-CDT - nime BIOS file during the update

  Have an old TOSHIBA T2150 CDT PA-1186U. BIOS version computer messages during the boot process is ' BIOS Toshiba video v2.0» When trying to update BIOS upgrade bios excessive wonder entry "name of BIOS file. I have registration ' "B2150CDT."» EXE' but bios excessive says "cannot find the BIOS file.

  What name of BIOS file I have to input durin processing BIOS update program?

  Hi flâneur.

  To be honest I don t understand what you mean exactly but maybe that information on the page of the Toshiba BIOS update can help you a bit:
  http://www.toshiba-tro.de/biosinfo/

• Satellite A300 does not start after extinction during the BIOS update

  Hello

  I tried to update the BIOS after reading a TOSHIBA TEMPRO alert, after some time, apparently not run so I ran a second time, then both ask of BIOS appeared in the taskbar only and it froze while I did not start the upgrade or anything like that I had to the power off.

  I tried to restart, but now, it just on the screen stays black (the monitor is not powered, as if the system was not running), all LEDS are powered with flashing 'drive access', the led on the DVD Player keeps flashing making a noise every 3 seconds or more.

  I read on the forum that there may be no solution but to take it to an authorized service provider but I'm willing to take any possible solution before you do.

  Thanks for any advice.

  Alex.

  Hi, mate

  Unfortunately, you need to be reflash the Bios as something that went wrong during the update. You should contact the Asp and ask them to reflash. There is no other way to get your laptop to work.

  Good luck!

• Satellite L350 - BSOD during the recovery and missing "BOOTMGR"

  Hello
  I have a Satellite L350, Vista Home premium SP1, (had it for about 4months)

  Yesterday I received an error black screen on my laptop it says to reboot, so I did, then just, my laptop wouldn't stat more, I have no idea why?

  So I put in my computer come with recovery disks laptop just reinstall every thing as if I just got it out of the box and I followed the instructions that the Recovery Wizard disk Toshiba says, and as his 'adaptation of the files', I get say Blue error screen "a problem has been detected and windows has shut down to prevent damage to your computer DRIVER_IRQL_NOT_LESS_OR_EQUAL".

  And tell to reboot or what ever and just keep it.
  (Info tech: STOP: 0x000000D1 0x00000002, 0x00000000, 0x8D246FD7)
  (usbccgp.sys - address 8D246FD7 base at 8D23E000, Datestamp 47919053)

  Then I reboot my system and a black screen comes up saying "BOOTMGR missing".
  So now, I have nothing that works, I retried the disks but same error with blue screen.
  I also tried to make the atmosphere safe and decent here, nothing works.
  I m needs help!

  Thanks for reading, sorry for so much reading to do

  The reason why laptop doesn t start (error bootmgr) while the installation is stopped with a BSOD. If you need to reinstall the laptop again.

  It looks like a USB problem because I found this in the Microsoft Knowledge Base:
  http://support.Microsoft.com/kb/945436/en-us

  If you have connected the external USB devices to the laptop, remove them.
  In the worst case, there is something wrong with the USB ports or controller and the motherboard must be exchanged.

• Satellite 2550: Pushing 'C' starts the recovery procedure

  I'm trying to re - install my laptop (Satellite 2550CDT), but by pushing the C does not start the recovery cdrom I have. I'm just following the instructions. What should I do to re - install the laptop?

  Jasper

  [Edited by: admin]

  Hi Jasper,.

  Normally just need you to press and hold the "C" key during the initial walk up the laptop emits a series of beeps. However you can also press the F12 key during the initial power to access the selection menu device BIOS where you can select your CD-ROM drive as first boot device.

  Kind regards