message: winword.exe has a problem.

Similar Questions

• When you try to uninstall a program, I get the message setup.exe has stopped working, can someone help me with this problem

  I'm trying to uninstall a printer, but only part of it was uninstalled, there are 2 parts more than the necessary printer uninstalled and I get the message setup.exe has stopped working

  Hello

  ·         Faced with this problem specific to uninstalling the application with the printer, or with another application?

  ·         What is the brand and model of the printer?

  You can follow the method below and check if it helps.

  Method 1:

  I would say as you put your computer in a clean boot state and check if it works.

  How to troubleshoot a problem by performing a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: Don't forget to reset the computer to start as usual, once the problem is resolved. Follow step 7 on top of the kb article.

  Method 2:

  I suggest to install the application printer again and then try to uninstall it, if only the problem is specific to the printer.

  http://Windows.Microsoft.com/en-in/Windows-Vista/uninstall-or-change-a-program

  Hope this helps,

• Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen

  Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen. can someone help us?

  Hi Andy,.

  I checked the reported compatibility list, and the game is listed as compatible.  Work in 64-bit or 32-bit Windows 7?  I will try to reinstall the game, if you did an upgrade from Vista to Windows 7 recently.  If it is a new installation and does not, please visit the EA's Web site to get the latest patch for the game to see if that helps address your problem.  Let me know if you've done all that and you still have questions, and we can try something else.

  Kevin

• get the message "setup.exe has stopped working" when trying to install labview 2011 or 2012 on a windows machine 7

  When you try to install labview 2011 or 2012 on a windows machine 7, I get a message "setup.exe has stopped working". I tried to run setup.exe as an administrator with the same results. I have Microsoft .NET Framework installed on the affected machine 4.5.1. Could be the cause of this problem? Or does anyone know the root cause of this error?

  Hi - are you getting it at the beginning of installation, during or after 100% progression ended?

  Is it fair to LabVIEW you install, or is it drivers too, in this case, what was the last big package that has been installed at the time?

  This can be caused by the NVIDIA chipset driver:

  https://decibel.NI.com/content/message/46299?TSTART=-130

  Thank you
  Sacha

• Explorer.exe has a problem and needs to close, then no icons on the desktop or taskbar.

  Dell Dimension XP SP3 Media Center. Started with the error box of explorer.exe has a problem and needs to close to logging in any user. Information about the error is explorer.exe 6.0.2900.5512 user 32. dll mod ver 5.1.2600.5512 offset 000d9d9

  When you click on debug a doctor Waston has encountered a problem error box. Error closing box you take at bottom of screen with no icons or taskbar. You bring up the Task Manager, but does not run any new task. After studying the problem found that run sfc/scannow will bring back normal office and functioning of this session. Problem returns the next time the computer is started. Update history audit showed an installation failure of update KB 971029. Reinstalled update and normal office appeared for this session. sfc/scannow application of Service Pack 3 CD 4 times and WinXP CD2 6 times. Using XP CD provided with the computer says it's the wrong CD. Cancellation through sweeping back normal functioning during this session.

  Hi ChrisGangaware,

  · Do you remember all the recent changes on the computer before the show?

  Try the methods below:

  Method 1:

  I suggest to complete the process of analysis of the system, you can follow the steps in the link when he asks for the CD-ROM service pack below: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker: http://support.microsoft.com/kb/900910 (valid for Service pack 3)

  Method 2:

  If that does not help, then try to perform the system restore and restore the computer to the previous date it worked great:

  How to restore Windows XP to a previous state: http://support.microsoft.com/kb/306084

• I have install AdobeProDC yesterday and now I can't convert my email in pdf format.  I have the following message: Acrobat PDFMaker has detected problems in the installation.  Please repair/reinstall Acrobat.   How can I fix this?

  I installed Adobe Pro DC yesterday and now I can't convert my email in pdf format.

  I have the following message: Acrobat PDFMaker has detected problems in the installation.  Please repair/reinstall Acrobat.   How can I fix this?

  Try to remove Acrobat DC with the tool from here: Download Adobe Reader and Acrobat cleaning - Adobe Labs tool , restart the computer and reinstall Acrobat Pro DC.

• At startup, Error Message: dd.exe has encountered a problem and needs to close

  Every time you start the Error Message is: dd.exe has encountered a problem and needs to close. Close.

  "dd" is - in this list.  Looking more far over the line to SD in this list...

  What is the 'command' that launches the application (perhaps to widen the column to see everything) and what is its 'location' (perhaps to widen the column to see everything)?

  (Only for the DD.)

  You could uncheck here, restart and see if it happens again (it will not).

  Then, with the information that I just asked for, there's the real 'location' and remove the 'command' begins with manually to get rid of it permanently.

• Error message: KBD.exe has encountered a problem and needs to close

  kbd.exe has encountered a problem and the need to close

  kbd.exe has encountered a problem and the need to close

  KBD.exe is part of the driver for your keyboard. Go to the support page and drivers from your computer manufacturer's website. Enter the model number of your computer. Locate the driver for your multimedia keyboard and reinstall.

• Error message "HPSF.exe has stopped working" whenever I have open hp support assistant HP g6

  I have thought honastly this laptop couldn't be worse. I downloaded the latest version of the hp support assistant after resinstalling windows and all the other stuff of hp and when I try to get updates from hp it comes up with a

  error message saying "HPSF.exe has stopped working" from there he returns constantly with Deputy of support every time error begins.

  Windows 7 64 bit

  Please try to uninstall, download of the last being and resettlement.

  Here is the link to the latest version of HP Support Assistant:

  http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58915.exe

  Here is the link to the latest version of the HP Software Framework:

  http://ftp.HP.com/pub/SoftPaq/sp59001-59500/sp59202.exe

  So here's a support document which guides you step by step: http://support.hp.com/us-en/document/c02435801

• Whenever I open my computer I get this message: "explorer.exe has stopped working".

  original title: explorer.exe has stopped working

  whenever I try to open my computer it tells me that windows Explorer has stopped working, everything else works but when I go into safe mode it let me go in my computer and I checked for viruses and there is no someone help me, please to fix this i dnt want to start over and lose everything. hope to hear something back as soon as possible. Thank you and have a nice day.

  Hello

  The computer works fine in safe mode, I suggest you perform a clean boot in order to check whether a third-party program or service that runs in the background is the origin of the problem.

  Refer to this article for help:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  
  Note: please check that you put your computer to normal startup mode after completing the troubleshooting steps. Steps are available in the article above.

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Receiver error message: "systemprotector.exe has stopped working" whenever my computer starts.

  Original title: "systemprotector.exe has stopped working".

  I am on Windows 7 and I get this error systemprotector.exe ceased to function in a pop-up box every time my computer starts up.
  Whatever why is show, and how to fix it?

  Thank you.

  Hi Zachjd,

  Thank you for the question!

  It would be useful that you could answer this question to help you further.

  Have you done a recent software or hardware changes to the system?

  Systemprotector.exe seems to be an associated process of Advanced System Optimizer. If you have installed any Advanced System Optimizer, you can try to uninstall and reinstall the same and check if it helps.

  Uninstall or change a program

  Install a program

  If you need further assistance, please answer and we will be happy to help you.

• Whenever I restart my computer, I get the following message: PrinterSelect.exe has stopped working. Windows can check online for a solution to the problem.

  Description:
  Stopped working

  Signature of the problem:
  Problem event name: CLR20r3
  Signature of the problem 01: printerselect.exe
  Signature of the problem 02: 1.0.2453.22313
  Signature of the problem 03: 450fe152
  Signature of the problem 04: mscorlib
  Signature of the problem 05: 2.0.0.0
  Signature of the 06 problem: 4a7cd8f7
  Signature of the problem 07: e4
  Signature of the 08:10 problem
  Signature of the problem 09: System.Security.Security
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  To install a new all-in-one, I'm afraid that I will continue to have problems and the same error message.  Any help would be appreciated.

  Hi dtwes,

  try to stop the program from running at startup:

  Tutorial: http://www.vista4beginners.com/System-Configuration-Utility
  deselect 'printerselect.exe '.

  I hope this helps.

• Why the message (wuauclt.exe has encountered a problem and needs to close) when I start the computer?

  Operating system - XP

  Message asking if I want to send the problem to Microsoft.

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:

  Start the computer in safe mode and check if the same problem occurs:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:

  Try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• I get a message "Remind_XP.exe" has encountered a problem and needs to close

  I can't connect to my car because this problem will not let me get the Security screen powered by JAVA.  I've downloaded JAVA again.  This is a problem which occurred yesterday after my safety identified and deleted some riskware.

  Hi Marlene,

  Remind_xp seems to be a program related to your CD/DVD writer software, see http://www.processlibrary.com/directory/files/remind_xp/25430/.

  You can disable the startup (delete if his debut in-> programs-> start menu) or click Start-> Run Type &--> msconfig-online slot start-up remove the tickmark for the file.

  I hope this helps.

• Programs to get forcefully liquidated with user input, on HL2 I get the message: HL2.exe has stopped working.

  Original title: programs get forcefully closed with user entries

  It becomes a common problem. I play the game of Garrys Mod, when its about done with 'send customer... '. "or other words, by sending the list of add-ins to the server, it fogs upward and then an error pops up saying"HL2.exe off work"of such and such, its normal for the program to do and this happens more often and moments later, he continues with normal function, but this time, windows does not allow it.

  Hello
   
   
  1. have you made changes on the computer recently?
  2 is this number reserved only for this game or any other games and programs too?
  Method 1.
  Many users have solved this problem by disabling the DEP (Data Execution Prevention).
  See the Disable DEP for an individual program section in the article below to disable the DEP for this game.
  Change Data Execution Prevention settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-data-execution-prevention-settings
   
  Method 2.
  It is a possibility that a third-party application is causing the conflict. Let us try to play the game in the State of clean boot and check if it works very well.
  See the article below for more information and measures.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
   
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.