Messages to the JMS OSB topic disappear even when not subscribed

Similar Questions

• I can not connect on my user profile who is also the administrator. I get a message that the password is incorrect, however I have not changed the password. s not now what it was

  I can't connect to my user profile who is also the administrator.  I get a message that the password is incorrect, however I have not changed the password. My 11 year old niece used the pc last (play online games) and I was informed that it was a download/installation, but do not now what it was. I can't download or update any information on the pc that this requires the admin password. I am currently using the guest account, that does not give me access to all programs and the pc is running a little slower than ususal. Your help with this questions is appreciated.

  the operating system is Windows Vista Home Basic 32-bit.

  Hello

  If your niece has changed the password, or you have a corrupted system, this Information Microsoft will help you.

  Here are the different circumstances where it can help you.

  You will need to borrow a Microsoft DVD from a friend, Recovery DVD a manufacturer without these special work options available.

  • http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  And as you say that your niece may have downloaded something, that something could have been malicious, that can cause problems with password.

  Download, updatre and scan your system with Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See you soon.

• I've just updated to LR5.  I also have a new camera.  Nikon D800.  Try importing directly (from the camera) in LR.  But without success. Get the following message.  "The files are a camera which is not recognized by the raw format support in Ligh.

  I've just updated to LR5.  I also have a new camera.  Nikon D800.  Try importing directly (from the camera) in LR.  But without success. Get the following message.  "The files are a camera which is not recognized by the raw format support in Lightroom."  How can I import it please?

  I find the program file for Lightroom 5 and make an icon of office for him. And I would get rid of Lightroom 3. If you open Lightroom 3 and you see images in the old catalog, not the updated one.

• my battery drains very quickly even when not in service, what should I do to fix that?

  my battery drains very quickly even when not in service, what should I do to fix that?

  Hello rabeeha hafeez robi.

  Thank you for using communities of Apple Support. It is my understanding that your iPhone battery has been draining more than expected. I use my iPhone all day, so I know how important the battery life can be. Surely, I understand your concern, as much as it seems as if the phone is not in use.

  First, I recommend that you check your settings to see what is using your battery life. You can do this by going to settings > battery. In some cases substantive activity of the app may affect the battery life. This means that the battery is used by an application while it is in the background. The link below provides additional information and advice to help maximise your battery performance.
  Batteries - maximize Performance

  See you soon.

• Message-Driven beans and the order of the messages in the JMS queues.

  Hi all

  We use Weblogic 10.3.6 and we have a cluster with 2 JMS servers. In our project, it is important to process messages in the order when they arrive in the queues.

  Our question is simple enough, the fact that Message-Driven Beans (of the sort that take up messages in parallel) follow the order of the messages? Or do we need to configure something to do this.

  Thank you!

  According to the oracle documentation:

  With the help of unit-of-Order with Destinations spread

  As already mentioned in the Message of treatment according to the specification of JMS, Service of Message in Java specifications (to http://www.oracle.com/technetwork/java/jms/index.html ) doesn't guarantee no message ordered delivery when applications use distributed queues. WebLogic JMS redirects messages with the same disorder unit and have a target distributed to the same distributed destination member. The Member is chosen by unit of the order of the destination configuration:

  • By using the Service path
  • The hash-based routing using

  You can also

  If you distribute, you can use control unit andmax-beans-in-free-pool:

  http://docs.Oracle.com/CD/E23943_01/Web.1111/e13814/mdbtuning.htm#BABBEFCA

  More information here:

  Using Message unit-of-Order - 11g Release 1 (10.3.6)

  Tuning Message-Driven Beans - 11g Release 1 (10.3.6)

  WebLogic Server (WLS) JMS mapping control unit works with uniform distribution Destinations (Doc ID 1310795.1)

  Best regards

  Luz

• I'm updating my scanner software & I get the message that the administrature must install this even though I am the administrature

  I have a HP Scanjet 4890 scanner which I need to update the software. I get the message that the administrature

  must have access. I'm the administrature that appear when I look in the program & at the start but I still get this message.

  Thanks for any help you can offer.

  Harry Millard

  E-mail: * address email is removed from the privacy *

  Hi, Harrison-LindaMillardII

  Try and reset the permissions right-click Run as Administrator option when you are finished.

  http://blogs.msdn.com/b/astebner/archive/2006/09/04/739820.aspx

• I can't see the list of available wireless even when connected to wireless internet connections.

  I can't see the list of available wireless connections. So I can't connect to new wireless connections as I have not logged in before. The icon in the taskbar that would show you the possible connections disappeared. Nothing shows under connections network under Favorites network even when I'm logged in. I can pick up internet connections from earlier I can't see that one that is connected to or control it. Help, please. Thank you.

  Hi CorneliusE,

  1. what service pack is installed on the computer?

  2. what exactly happens when you try to view wireless networks? You receive error message nay?

  3. do you have security software installed on the computer?

  4 did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: You can follow the steps in the article and check if that helps you find the wireless network.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

  Note: Article applies to Windows XP SP 2, however, can also be tried with other versions of Windows XP as well.

  Method 2: If the method above is not enough, you can consult the following articles and check.

  How to configure TCP/IP to use DNS in Windows XP

  http://support.Microsoft.com/kb/305553

   

  To test TCP/IP connections by using the ping and the commands net view

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_tcpip_pro_pingconnect.mspx?mfr=true

   

  Let us know if that helps.

• Zoo Tycoon 2 crosses the installshield but then disappears and does not allow to play.

  We just bought this Zoo Tycoon 2 game too and have problems.  It goes throughout the installshield Wizard but then disappears and will not play.   We have uninstalled and I tried several times, still doesn't work.  We have even returned to the store and exchanged thinking it was all just bad software!  What a disappointment not to mention $40.00 in the sewers.  Any advice would be greatly appreciated.

  Hi Tricia,

  Have you tried to run the Setup file to install the game in compatibility mode?
  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

• The taskbar icon remains highlighted even when the mouse is moved.

  In windows 7, (and this is just a recent problem, so probably linked to an update of windows or something) normally when you move the mouse over an icon that is pinned to the taskbar (or icon of a window that is open) he puts out, then when you move the mouse from a distance, like on a document or something the highlight goes away. My laptop (from recently) does not remove the highlight. What I finally put the mouse in the taskbar remains highlighted until I put the mouse over something else (it does not disappear when I move the mouse away). This could be a third party software problem, or a bad windows update? (he has started making cela only a couple of days)

  It is now resolved, see http://www.winhelponline.com/blog/gadgets-not-displayed-correctly-windows-7-vista/comment-page-2/#comment-12981 for the solution. (see also here: http://social.answers.microsoft.com/Forums/en-US/w7performance/thread/0d5d0bf9-34dc-4cb1-b370-25fb04697276 for problem listed under a new topic)

• Flash Player playing multiple tones at the same time... even when the browser is closed

  I recently updated my Flash drive to 11.3 (latest version). When I go to a site that uses Flash (YouTube, for example), I'll start the video and then 10 seconds later, I get multiple tones at the same time. They all look like advertising, or TV stations. Even when I close my browser, the sound continues. When I opened my sound mixer, it is a "program" listed in "winrscmde", who plays both audio channels. When I go to the Task Manager, "winrscmde" presents itself as a svchost.exe * 32. When I stop this service the sound stops. It will resume again when I access a flash site. When I uninstall Flash Player 11.3, it stops.

  I am running Windows 7-64 bit with latest updates. THAT IS TO SAY 9.0.8112.16421

  Any help would be appreciated.

  Well, I think I solved the problem.

  I found this topic:

  http://www.bleepingcomputer.com/forums/topic442928.html

  On the second post down, the poster recommended download killer TDS winrscmde.exe is disquised as svchhost.exe in the \windows\system32 folder (you click on 'Properties', then the 'Détails' tab and check the original file name... If it is false, it will say winrscmde.exe under the original name).

  I also ran the program aswMBR as well as FixTDSS (http://www.symantec.com/content/en/us/global/removal_tool/threat_writeups/FixTDSS.exe).

  That seems to fix the problem. Just reinstalled Flash and do not get the same questions. The svchost.exe in the \windows\system32 folder is legitimate!

  Hope this helps someone else with the same problem.

• The WiFi symbol indicates "!" even when properly connected

  Suddenly the WiFi symbol in the notification panel started showing "!" whenever connected to WiFi. I know what means the exclamation mark with the WiFi symbol. But in my case, even when I am connected to WiFi and can download apps and surfing, the WiFi symbol always an exclamation point. I tried a hard reset. It worked fine which is the WiFi symbol was back to normal as before until I restarted the device. After the first reboot I have faced the same problem, i.e. the exclamation point with the WiFi symbol even if it is properly connected. Tried clearing cache and also entered the mode without failure, but nothing helped. Is there a solution to this?

  PS - Did not change anything. The bootloader is locked.

  Have you used mobile data on SIM2 before connecting the WiFi?

  I have the same problem after the lollipop. Figured out that exclamation point appears them on WiFi sign only after I used mobile data on SIM2. When I use mobile data on SIM1 and then turn on WiFi, everything is OK (the WiFi sign is without '! ")

  So how you can solve this problem:

  1 turn off WiFi

  2. activate the mobile data on SIM1. Wait for that 'H' or 'E' sign indicating that mobile data sucessfully working. Put access point sometimes lost: mobile networks goto-> Access point names and be sure that this radio button is active.

  3. turn on the WiFi. Now, there is no exclamation point!

  And if you use mobile data on a single SIM card. just swap the SIM card in the first slot.

  Surely this is a bug. Big bug in Lollipop for Dual SIM MOTORCYCLE G. Motorola's remedy.

• Installed service pack 3 and now hearing ads even when not on the computer

  Know even when you're on the computer, ads continue to play.  There is no picture, just sound.  What can I do to stop the sound coming through the computer

  Hello Jackie,.

  ·         Have you checked if there is any program currently running on the computer?

  You can check if there are any program playing the commercial.

  Open the Task Manager and check if you don't see any program on the desktop. Right-click on the taskbar and select Start Task Manager.

  Do not respond with results so that we can help you best.

• VB6 DLL is not log messages in the Windows Server 2003 event log when it is called from an ASP page

  Hi all

  I have an ASP web application, I will create a "VBModule1" (VB6 Dll) instance of an ASP page and inside this method of "VBModule1" I create an instance of another VB6 Dll 'VBLogger', who calls App.LogEvent () to write messages to the event log.

  I tested the Web application on the develepoment (XP) machine and everything worked fine but when the user runs the Web application on the Production Server (windows server 2003) events are not saved.

  Friend missing the security settings of my ASP web app that needs to be configured on Windows Server 2003 for VB6 DLLs logging events?

  Please think as soon as POSSIBLE.

  IIS on Windows server 20003 version: 6.0

  Thank you.

  Hello

  The question you have posted is related to Windows Server 2003 would be better suited to the Windows Server community.

  Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Error message indicating the r300 display driver stopped responding when using the full screen.

  Original title: driver atikmdag error message when using the full screen.

  Error message indicating the display driver r300 unresponsive, but has recovered, usually when enter full screen mode.

  Hi Peterrichardson,

  1. when exactly you get this message?

  2. what player do you use?

  3. you remember to make changes to the computer before this problem?

  Method 1:

  You can try to reduce the hardware acceleration and check.

  a. click the Start button, Control Panel.

  b. now, select appearance and personalization, and under display, select adjust screen resolution.

  c. now, select adjust the resolution.

  d. click Advanced settings.

  e. now, click the Troubleshooting tab, and select the change settings button.

  f. in the Security dialog box, click on continue.

  g. move the hardware acceleration slider to the third notch.

  h. click OK and restart Windows.

   

  Method 2: Update your display driver

  Updated a hardware driver that is not working properly

  Hope this information is useful.

• receive an error message that the cover is open, but it is not, on my deskjet 6980. How can I fix it?

  I have a HP Deskjet 6980.  I recently changed the ink cartridge, but since then have not been able to print. I get an error message indicating that "cover is open", but it is not.  How can I fix?

  Hi Cathy,.

  Please follow the t\s mentioned in the following document.

  http://support.HP.com/us-en/document/c01065334

  Thank you