Messgae of error, "the next network device did not install a driver" when using MDT.
Hello
I'm trying to deploy an image of windows 7 using MDT.
It gives the error below.
The following network device did not have a driver installed.
PCI\VEN_8086 & DEV_153A & SUBSYS_05A41028 & REV_04
MN
MDT is beyond the scope of this site and should be asked on the Technet site.
http://social.technet.Microsoft.com/forums/en-us/home
If you are deploying an image, I think that you need to change the image
Put them on Technet.
Tags: Windows
Similar Questions
-
Hi all
I've installed WDS/MDT2010 to deploy the Windows & OS, it works with most of my models of HP laptops.
When I deploy ProBook 645 G1 it gives me error foloowing.
A connection to the deployment share could not be established.
The following network device did not have a driver installed pci\ven_10ec & dev_8168 the & subsys C 1992103 & REV_0C
Retry: try again to connect to the deployment share or give up.I have download all the network driver available for this model and imported in out-of-box driver, updated sharing deployment and run again but still having the same issue.
Grateful if someone can help me on this.
Thank you
Hello:
The only suggestion I can offer is to try the driver directly from Realtek.
Second driver on the list.
-
Original title:
When I start my computer, a message on the screen says I have no hard drive installed. my computer will load eventually after many attempts and when I clicked on my D drive, where all recovery files are kept, it tells me that the disc is damaged and inaccessible. Can someone help me before I'm locked out of the computer for good? Thanks in advance Andy D.
Determine the manufacturer of HD computer. Go to the manufacturer's website and download their software/utility to check the Dowload HD it and burn it to CD or DVD according to the instructions. Boot from the disc newly manufactured. Run the utility to verify. If necessary, replace the HD and restore backups.
Tom Ferguson
-
Visual studio runs (.exe) file can run in the other computer where did not install visual studio?
I use a visual studio 2012 to make a program file,
This is a file to execute, which is my generated program file.I can throw in another computer in which another computer has not installed any visual studio?
Thank you
Hi Chi,
The question you posted would be better suited in the MSDN Forums since we have dedicated to this support; We recommend that you post your question in the MSDN Forums to get help:
Keep us updated on the status of the issue.
-
I'm not able to download anything. I tried to download updates to the installer does not work. Tried to restore to the last backup, he did not part. I can also connect to the wifi.
Hello
1. what browser do you use?
2. you did it any hardware/software changes to your computer before this problem?
3. that you get this error message during the download? And also what is the exact error message?
4. what exactly happens when you try to connect to the WI - FI?Please answer these questions and tell us more about the issue.You try to run the clean boot on your computer and check.From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135Thanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
Menu start no longer displays options to shut down the computer, someone knows how to change that? The power options menu did not help.
When this happened to me, it was malware that didn't stop my computer, probably because she wanted to do something with it. I held the power button down until the computer is turned off manually, then I rebooted in safe mode - I run Vista - and ran some virus and malware programs until I found the beast and it crashed. You can also run a scan MS online at onecare.live.com, which was updated earlier this week. Moreover, I had not any data loss or permanent damage.
-
Wireless network adapter is not installed and configured
I have recently re installed windows vista for my laptop dell inspiron 1545. I am not able to connect to wireless internet, it says that the wireless network adapter is not installed and configured. How do I install it and where can I get the wireless network adapter. I have a cd or anything for it. Thank you
You can get in trouble with your device drivers, firmware and/or software. Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears. Check each device to a red x, yellow! or white? These identify devices with problems probably (drivers, but also of conflict or something else). Click on each for more details and troubleshooting tips. If you need to get drivers (and you shouldget from Dell for the wireless adapter at all you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates). In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm. Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html. > http://support.microsoft.com/kb/244617.
The adapter is inside the laptop. You don't need to do something with it to install it. Install the drivers, firmware or software for it and your version of Vista from Dell (all that apply) "install". You must then go to start / Control Panel / Network and sharing Center and configure the adapter with the appropriate parameters and to establish the appropriate network connections. This will take place in settings required by your ISP, and maybe your router or modem (so you may need to contact them if you don't know the settings).
Here are the procedures for Vista with Windows7 network layout that can help:http://www.windowsnetworking.com/articles_tutorials/Windows-7-Understanding-Network-Administration-Configuration.html.
Here is another article on home networks (with several links to related articles which must all be considered - as well as others, you will find in the related articles) to help you better understand the home networks: http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network. If it's for Vista, much of it applies to Windows7 (although there may be some differences that should be addressed in the previous article).
Here is an article on the networking of the different versions of Windows:http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows.
Here is a tutorial on how to set up a home network (including a wireless)-click on additional links for more information that may be helpful:http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.
Here is an article on troubleshooting network connections wireless (with links):http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-network-connection-problems.
Here's a long guide on wireless internet connections in Vista:http://www.techwarelabs.com/guides/misc_mod/vistaconnection/.
Here is an article on how to set up wireless internet in Vista:http://www.clpgh.org/usingthelibrary/technology/wireless/WindowsVista.pdf.
As I am unsure of your Setup, I've included several items that can help depending on how you are setup.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
HP EliteBook 8540w: "Base system device is not installed driver.
Hello
I recently installed Windows 7 Enterprise on my HP Elitebook 8540w, and since then the unit has been a couple of kinks.
The material under properties pc looks like the picture. It does not install a driver for my printer/scanner, and the headphone jack has not worked since installing Windows 7 Enterprise.
Thanks in advance.
Hello:
Please first install the chipset driver and restart:
The base system device is lack of card reader driver:
See if this driver USB 3.0 solves the problem of USB.
If the unknown device persists after installing the above drivers please do as David has requested and post the hardware ID's for her if we can send you the link for the drivers.
Paul
-
Windows XP SP3 problem
Recently, I met a problem with my PC and was forced to use the system recovery. Now I'm back to factory settings and try to install Windows XP Service Pack 3 on my computer. Windows Update won't work for me, that whenever I try to update I get [error number: 0x8024400A]. I think it's because I use Service Pack 2, or that's what I concluded after researching the problem, anyway.
This is not my real concern, however. Because I could not get the update automatically, I tried to download and install the "Windows XP Service Pack 3 Network Installation Package for IT professionals and developers" myself. The first time I did it, I restarted the PC after the installation and was met with "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. " I went into safe mode and went to a just system restore point before SP3 was installed, but now I don't know how to install it correctly without encountering this problem after reboot. I'm hardly the easy just stick with SP2 when there are potentially important available updates. How can I get Windows Service Pack 3 is installed on my PC?
It's certainly interesting!
If the cause of your problem is to have a HP PC with an AMD processor and an original image on your hard drive (and of course it sounds like this is the case), the solution should be to rename the file intelppm.sys and launch the sp37394.exe patch. Once done, the SP3 file that you downloaded from here:SHOULD work!I'm puzzled why there is no intelppm.sys file in your directory C:\WINDOWS\system32\drivers.Since you recently returned to square one with your PC ("return to factory settings"), then you may as well run the patch from this page:and try the SP3 Setup file again.But, first, let's be absolutely sure that we are both using the same terminology. Please answer the following questions:1. have you safely backed up ALL your data?2. what method did you use to ride "back to factory settings? I think that your choices have been a destructive restore (full) and a (partial) non-destructive recovery. The first erases the disk and leave you with a pristine image and NOTHING ELSE (which means that all of your programs and data get deleted). The other (which does not always correctly) is supposed to leave programs and data intact. -
Printer : Officejet Pro 8600 Premium. model CN577A
OS : Microsoft Windows 7 Home
Base-64How your product is connected to your PC? : Network
Description of the problem : in the Device Manager I have an error message with the
OfficeJet pro 8600 icon - "the drivers for this device are not installed.
(Code 28)
There is no driver selected for the item or a set of device information. "I have
have uninstalled and reinstalled the driver without result. The printer
seems to work fine.
Hello
Yes, I would also suggest a new re-installation of the software.
-
m facing a problem with hub 4 ports usb of my... When I connect usb hub my with my usb keyboard and mouse, and then the lights of the suite to get devices but they doesnot work... and the error message shows... I checked in Device Manager and I got the message details which are given below.
Device status:
This device is disabled because the firmware of the device did not give him the necessary resources. (Code 29)
driver version:
6.1.7601.17514
Please help me... Thank you.
Hello
In the Device Manager - right click on the device and Uninstall - when complete reboot.
Check in the Device Manager to see if the device re-installed. If it isn't action - Scan for
hardware changes.Also check the BIOS - Setup/settings - often F2 for system start - make sure that the USB port
is activated. Check with Support from the manufacturer of the system/motherboard, their documentation online.
and ask in their forums.How to fix error Code 29
http://pcsupport.about.com/od/errorc/a/code-29-error.htmI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Error code 28: the drivers for this device are not installed for Ethernet controller
Original title: I received an error message for, controller ethernet, the drivers for this device are not installed. (Code 28)
I don't know how to install the drivers for ethernet controller, and I don't think that I have a CD for it. And I don't know where to go.
Hi jhawkerchic,
1. What is the number of brand and model of your computer?
To resolve this problem, you must install the latest version of the drivers for the device.
You can check the manufacturer's website and download and install the latest version of the drivers available for the device.
You can see the following article for more information about the error Code 28:
Explanation of error codes generated by Device Manager in Windows XP Professional
http://support.Microsoft.com/kb/310123
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
original title: error number: 0x800CCCD2
Can anyone help with this issue:
Header download for the 'sent items' folder did not complete. Cannot select "Sent items" on the IMAP server. You could try refreshing your folder list to synchronize with the IMAP server. Account: 'AOL', server: 'imap.aol.com', Protocol: IMAP, server response: "SELECT failed", Port: 143, secure (SSL): no, error number: 0x800CCCD2
Thank you!
Hi again Steve - I have spent a lot of time on the phone this morning to Dell technical support. the accompaniment of the victim and I did a lot of fiddling around with various options of Windows Mail and I don't know exactly what we were doing, but the issue seems to have resolved itself! Thank you for your time and trouble.
Best, Douglas
-
Original title: Microsoft Management Console this feature only is not supported on this system
I am running Vista 32 bit Business since an administrator account.
Recently, I noticed that the automatic updates did not install it and returned error 80070005. After investigation, I found that I could not open mmc at all and always get the message "this function no is not supported on this system. No major changes have been made to the configuration to trigger it and I can't watch the event log because it is in the MMC.I have studied this question in line and tool the following actions, which none worked:carried out a complete antivirus scan (I use Commodo internet security)created another account administratorhas run SFC (no problem)has run the registry cleaner (no problem)has run msconfig.exe and disabled all the startup processupdated windows right click and run as administratorStarted in safe mode and tried all aboveAfter that, I don't know where to go... it doesn't seem to be a download for Windows vista to reinstall mmc.I have about 50 updates critical, sitting in my windows update that can not install because of this problem. Can anyone help?JeffHello Helpmehelpme,
First, I would check since it is professional Vista was that computer on a field of work or it was already on an area of work? There may be group policies that are in place that prevent to run MMC.
When did start to happening? Is there anything new on the system which has been introduced into the environment (software, hardware)?
This thread gives a few steps trying to the original poster that you can't have.
-
Itried the benchmark tool, it did not help. I tried the scanning from the prompt, it says that some files were corrupted and could not repair them. There is no error message at all
Maybe the info will offer something that you haven't tried:
First, launch... Task Manager...
How to launch the Task Manager instantly in Windows XP or Vista?
http://www.XP-Vista.com/tipstricks/how-to-launch-the-Task-Manager-instantly-in-Windows-XP-or-VistaThe Task Manager / processes tab select (highlight) any which instance of:
"wmplayer.exe" and left click on the button "complete the process".If you see a dialog box 'Warning'... left click Yes.
Close the Task Manager.
Try Windows Media Player again.
And... the following links may be worth a visit:
(925704) when I try to use Windows Media Player 11, the program
does not start, or some user interface elements are empty
http://support.Microsoft.com/kb/925704Please see the following article for info on opening a high command
Prompt in VistaWindows Vista - command prompt: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/command-prompt-frequently-asked-questions
(scroll down to: how to run a command with elevated privileges?)Good luck...
Maybe you are looking for
-
23 - g013w: passes simple
I have simple pass on my computer and I like the concept, BUT when I read a page or just to think about what I read in as a minute my screen turns off and simple pass appears and I have to continue to put in my pass, I need to know is, if there is a
-
Replacing the screen to Satellite L20-155
Hello With the models to screen witch can I replace my old a broken?Where can I find/order it?I want to replace by myself, because the warranty period has already passed a few months.It is a 15 "display...Type: TFT XGA displayInternal resolution: 102
-
Storage of data in a table all N cycles 2D
I try to save data and index of all cycles N, then put them in a 2D array. I managed to save the data of all cycles N, but I have some difficulty to save them with zeros in the meantime. G E. I save all 3 cycles I y 0 0
-
My canon printer only prints in green.
My canon pixma mx922 only prints in green, yellow and cyan sometimes. My theory is that the problem is caused by the ink not deployed by canon (it's ink not expensive), because the printer makes it as soon as all but a type of ink, black was not made
-
2nd drive HARD drive caddy optical Bay - Pavilion dv6700
Hello world I hope someone here can help with that, because I'm out of ideas... I've recently updated the primary drive of my laptop dv6700 (dv6820es) with an SSD. I did a new install of Win_7_32 and there is no problem at all. But this record is not