I have problems with Microsoft 6to4 adapt reports tv_configmgrerr31 and also microsoft PS/2 mouse bring tv _ configmgrerr24

Similar Questions

• I have problems with Microsoft Fix It.

  I have problems when the hang up windows Internet, programs will not end/end as it should. It freezes up.etc. I installed Microsoft Fix It to my counter top, but whenever I try to use the resolution of performance problems & security I get the above error # 0 x 80040154 "an unexpected error has occurred, the Trouble Shooting Wizard cannot continue.  Most likely, I would get the same answer had tried other troubleshooting issues.  I have Microsoft Essentials for security and Windows XP Professional Version 2002 w/SP3 and Windows Internet Explorer 8. If any other information/details are required please contact me by e-mail (* address email is removed from the privacy * or your Microsoft Answers.)

  I have a lot of saved files w / diagrams, pictures etc, saved the internet... could it be my PC down? I am disabled and I use my PC so much for taking the time and stay in touch with the outside world. Help, please.

  Thank you for your kind assistance in advance.

  I thank very you much for your kind cooperation. I ran Malwarebytes(full scan), then MSE full scan. I used cleaner c, disc cleaning & fragmenteur. I always had problems. Performance has been a little better but still had problems major w / windows & Internet Explorer do not want to close the programs. I researced and downloaded Advanced System Care & performed a deep clean. He did wonders on my p.c. performance and other problems. It's the free version for which I am very grateful. Each day I pull up of Advanced System Care & he told me if I need quick care or the deep treatment. When you are finished, it provides found problems and fixed.

  I'm so glad that my friend shared about this cleaning/performance tool.

  Maybe this will help someone else.

• Problem with Microsoft wireless mobile mouse 4000 scroll will not scroll on any computer?

  My mouse does not scroll vertically, but it scrolls horizontally. I tried different mouse on this computer and they are all scroll very well and I tested this mouse on different computers and it won't yet scroll. I followed through all the utilities provided on this site (checking the HID, reinstalling the software, verification of parasitic programs, etc.) and nothing has worked. Is there something else I'm missing?

  Hi Vjenkins,

  As the mouse does not work on different computers and other mice work on this computer, it seems that there is a problem with the mouse itself.

  Sinceyou have followed the steps mentioned in article to resolve problems with the mouse button or scroll the parameters, I would suggest that you contact Microsoft hardware support for further assistance.

  Hardware support

• Why person do I have help I have problem with my I phone wifi.  And my phone only 7 days since I bought it why don't help people of Iraq it is only because I am of Iraq

  Hello

  I have a problem with my I phone 6 s / 64g / I bought the last week / my wifi has a problem it is disconnect automatically I had the same problem with my old phone I 6 / 64g help me please

  Thank you

  Take a look at this Apple Support article:

  https://support.Apple.com/en-us/HT204051

  Reset your network settings.

  Settings - general - reset - reset the network settings

  Reset your device. This will not erase your data stored on the phone.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

• Problem with Microsoft Notebook 5000 mouse not working not properly

  Hello

  My old notebook 5000 mouse, 3 yr became somewhat erratic, so I tried to clean the lens, gently, with a cotton wool bud! I know I shouldn't, but... Yes, I did.

  It was still more does not on the mouse pad, I tried on the laptop (black) a little better, but when I place it on a book purpley / red back to perfect recognition.

  Any suggestion would be appreciated, because its price doubled in since I bought it.

  I thought to replace, but you really can't find anything better, so I maybe but another.

  Or maybe find a purple mouse mat!

  Any help would be appreciated.

  Thank you

  Dave

  Hello Dave,

  Please provide a detailed description of the issue.

  There could be a possibility that this issue would have occurred because of damaged in the system wireless mouse drivers.

  Please provide me with the following information to better understand the issue.

  1. What is the exact model of the mouse that you use in the system? What is the mouse Microsoft Wireless 500?

  If so, I suggest to uninstall and reinstall the driver software Microsoft Wireless 5000 mouse and check if that helps.

  To do this, please refer to the steps below and check if that helps.

  1. Type devmgmt.msc in the search box start and press ENTER.

  2. In Device Manager, expand the mouse & keyboard listed in the list of devices.

  3. Right click on the driver.

  4. Click on uninstall.

  5. Restart the computer. The drivers will install automatically.

  To download the driver

  http://www.Microsoft.com/hardware/en-us/d/wireless-mouse-5000

  For reference:

  Please refer to the article below and check if it helps.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/en-us/KB/838398

  Or you can also check out this link as well.

  Troubleshoot a wireless mouse that does not correctly

  https://support.Microsoft.com/en-us/KB/321122?WA=wsignin1.0

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• I have problems with my spry menu in firefox and ie

  http://www.bayviewdropincenter.org/BoardofDirectors.html

  The menu in firefox correctly displays the menu for the Board on the right side whereas in IE9, it shows on the left side. Is there a fix for this or I have to live with it?

  Thank you

  Allen D. Macfalda

  Hello Allen

  I think your code errors that I mentioned in your other post of attachment will help with that also.

  http://forums.Adobe.com/thread/971256?TSTART=0

  Martin

• HP ENVY23: PROBLEM WITH A WIRELESS ADAPTER

  Hello

  I BOUGHT THIS REFURBISHED DESKTOP PC. ITS BEEN WORKING REALLY WELL FOR PAST 1 YEAR, BUT SUDDENLY, NOW HE BEGAN TO HAVE PROBLEMS WITH A WIRELESS ADAPTER THAT IS RALINK ADAPTER. PROBLEM IS THAT ADAPTER WILL SUDDENLY STOP WORKING. SO I HAVE TO GO INTO THE DEVICES AND ADAPTER MANAGER DISABLE AND ENABLE FOR HER WORK ONCE AGAIN. SOMETIMES EVEN THAT DOESN'T WORK SO AFTER RESETTING THE ADAPTER, I HAVE TO TURN ON/OFF THE COMPUTER. I HAVE NO CLUE AS WHAT THAT CAUSES THIS PROBLEM. PLEASE IF ANYONE KNOWS HELP.

  Thank you

  AHMED

  P.S I JUST TRIED TO UPDATE MY WIRELESS ADAPTER DRIVER.IT ME SAID I HAVE ALREADY UPDATED DRIVER INSTALLED.

  Hi there @JUMRONI

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  Please report the number of complete product for your computer. Check out the following, if you need assistance with this information. How can I find my model number or product number?

  I suggest to start by checking your system for malware, as follows:

  HP computers - solve and protection against viruses on your computer (Windows 8)
  Spyware, Adware and browser hijacking software

  If that fix it, you're done, otherwise, you should check these:

  Troubleshooting wireless network and Internet (Windows 8)
  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Forget the network: (Windows 8)
  1. press Windows Key + C
  2. click on settings.
  3. click on change PC settings.
  4. click on network on the left.
  5. click on manage known networks.
  6. click on the name of the network.
  7. click on forget.

  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Test an ethernet connection:
  Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

  I would like to know if this works for you.

• Problems with the installation of the bridge and the company

  Hello world!
  I have problems with the installation of the bridge and the company. Although I have install both of them successfully, when I try to connect to the gateway through the console I have error message saying there is no company installed. In fact, I get an error as well through the wizard saying "failed to run. Please see details below:
  
  Unable to launch: "C:\DOCUME~1\SIEBEL~1\LOCALS~1\Temp\2\LRE19.tmp\bin\java.exe-Dtemp.dir=C:\DOCUME~1\SIEBEL~1\LOCALS~1\Temp\2\ - cp C:\siebelent\siebsrvr\bin\setup.jar run - args LANG = ENU VISIBILITY = REPEAT BUSINESS = FALSE MODE = MODEL_FILE=C:\siebelent\siebsrvr\admin\siebel_server_sia.scm LIVE" error code: ""(SBL-STJ-00152)-1 "»
  
  Also, when I try ot run the following in the console: C:\siebelent\gtwysrvr\BIN\srvrmgr.exe - u - p SADMIN SADMIN - g siebelwin2k32-e SIEBELENT, I get this error: fatal error (3015667): the program variable 1% is not defined, existing...
  
  
  Thank you in advance for your help!
  
  MARIANA

  Mariana,

  Please confirm if you try to configure the siebel server in the same machine as the gateway server. If so try to use localhost instead of the hostname of the machine setting up Siebel server.

  I assume you are using windows 2003 as the operating system.

  Thank you

  Wilson

• I ran CHKDSK, the report tells me I have problems with the file system, usn journal. ___

  I ran CHKDSK, the report tells me that I have problems with the sys file. I ran CHKDSK/F, it is said it fixed the problem but I ran CHKDSK again and it shows that the same listed the issues.

  Describe how you run chkdsk.

  That is what the report said: you have problems with the sys file?

  CHKDSK examines the disk space and use of the disk for the table of allocation of files (FAT) and NTFS file systems. CHKDSK provides information specific to each file system in a situation report. The report shows the errors found in the file system. If you run chkdsk without the /f on an active partition command line option, it can report errors because it cannot lock the drive. You should use chkdsk occasionally on each disk to check for errors.

  If you run chkdsk from a command prompt while Windows is running, it can report errors or it may not report errors - and it may report different
  Errors each time you run.  If this is the case, it could just be the way you run chkdsk.

  Here's how Microsoft explains this observation:

  "... CHKDSK may report that the disc is damaged, even when there is no
  current real corruption. This can happen if NTFS happens to modify
  areas of the disc on behalf of some programme activities that CHKDSK is
  review at the same time. To check a volume correctly, the volume
  must be in a static state, and the only way to ensure that the State is
  to lock the volume. CHKDSK only locks the volume when /F or/r (which
  involves the 'F') is specified. For example, you may need to run CHKDSK more than
  time so that it can complete all the steps in read-only mode. »

  If you run chkdsk from a command prompt, you are not the necessary static state and you can encounter errors "when no real corruption is present. This is how it works when you use this way.  Any changes made to a NTFS file system modifies the USN Journal.  If you are not in a static state, your USN change Journal probably all the time, so what you see (says something like that) can be quite normal.

  Two ways to ensure that you are in a static state is to run chkdsk from the Recovery Console or to schedule a chkdsk to run the next time that the system
  Restart by answering Yes to the question:

  Would you want to check this volume to be the next time the system restarts?

  If chkdsk reports errors when running in a static state, the errors should be investigated, resolved or explained.  This may take several
  chkdsk runs all of the issues and some problems cannot be resolved by chkdsk.

  If chkdsk runs the next time the system is restarted, the activity and the result will be displayed in the application event log.  Look in the Application log for
  Winlogon events and a source have the date and the duration nearby time chkdsk.

  It is in fact a chkdsk additional reading if you want to learn about it and it will explain everything you see and why your expectations exceed reality.

  Please vote my posts as helpful so I can get a lot of points. I'm saving for a pony!

• I just got a call from somewhere in India that I have problems with my computer.

  Original title: hoax call?

  I just got a call from somewhere in India that I have problems with my computer. They know this, because I have generated error reports. When I asked how I could be sure who they were they led me to a screen with a ref to no error report. and he cites correctly for me. When I was asked to sign up for control of my computer for them to correct these errors, I refused and hung up. What happens with all those errors that we report to microsoft when our computers generate the error reports and how these appellants knew my error report reference.

  Fake phone calls to technical support

  Such unsolicited telephone calls are almost always a common scam. Do not let them give any info, donot give access to your PC, not give them all the money and donot go to all the websites that they suggest. One moment.

  Error reports contain no personally identifiable information. These people are hoping that your system recently sent to Microsoft to make their call seems more legitimate.

  Please see:

  http://www.microsoft.com/en-gb/security/online-privacy/msname.aspx .

  Microsoft does ever not requested for telephone calls of support or security.

  (such persons may use names other than Microsoft as well)

• I have problems with windows update

  Hello

  I have problems with the updates of the window.  I read install my window.  and start the update.  I update well until it installs the update for service pack 2. Once it restarts is said to check the updates, you must first install an update for the update of the window...

  When I click on install update of the stop and keep it on the research.  I have don

  ' t even use all the data.

  I already tried the Microsoft fix it and some troubleshooting aspiration which I met on the Microsoft site.
  (error trouble shoots)

  Windows update error 0x80072efd - not fixed

  recent update - no fixed installation issue.

  Can anyone help me please with her.

  Thank you

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode. If the report is in one language other than English, please indicate the language.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event viewer on your disc one and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  General remarks on event viewer
  http://www.gerryscomputertips.co.UK/syserrors5.htm

• I keep having problems with my server DNS does not. Computer Blu - Ray player and wireless both have problems with the connection.

  I have problems with the server DNS does not.  I have been using my wireless on my computer and watching netflix on my Blu - ray player at the same time.  The Blu - Ray player froze and wouldn't connect.  At first, I thought that the network has not been configured correctly, but it worked not five minutes before.  I tried many things and I realized it was that my DNS server does not.  Does anyone have any suggestions?

  original title: DNS server does not

  Hi Dwright,

  1. have you made changes on the computer recently?
  2. not the problem only occurs when you watch netflix on Blu - Ray player?

  Method 1
  I suggest you try the steps from the following link to fix the server DNS does not problem.
  a. click on start and then Control Panel.
  b. go to the networking and sharing Center and then click on change adapter settings.
  c. right-click on connection to the Local network and select Properties.
  d. Select Internet Protocol Version 6, and then click Properties.
  e. Select obtain DNS server automatically an address and press Ok.
  f. Select obtain IP address automatically.
  g. Repeat steps for Internet Protocol version 4 as well.

  Method 2
  Try resetting Winsock2 from the following link:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista (applies to Windows 7)
  http://support.Microsoft.com/kb/811259

  Method 3
  Reset TCP\IP.
  How to reset the Internet Protocol (TCP/IP) (applies to Windows 7)
  http://support.Microsoft.com/kb/299357

  Additional information:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• After the last updates of windows have problems with start up and now drivers

  Hello

  After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

  May 14, last night I had several (automatically) downloaded windows update

  Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

  Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

  Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

  Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

  Thank you

  Hi Jane,

  You have a disk to install Windows 7 with you?

  I suggest you to check the event viewer for error details report.

  Open event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

• Problems with Microsoft-tool to terminate malware

  Whenever I have download this tool from the microsoft update service I have problems with my laptop L10-104. The system stops after that one every time changing the period and the display resembles a church window.

  After that I deleted this tool, the laptop runs without problem. Is there someone with a similar problem?

  In fact, I don't download this tool, but that cannot be the finishing.

  Hello

  I never heard the show. I put t know what tool you mean exactly, but I think that it s a Microsoft problem and not a malfunction of the Toshiba laptop.
  I recommend visiting the Microsoft Knowledge base and checking if you can find more information on this tool.

• I have problems with the mail (El Capitan)

  I have problems with the mail

  See writing an effective communities of Apple support question.

  Without knowing what are these problems there is no way we can really help you.

  Try this:

  Start the computer in Safe Mode, and then restart normally. It will be slower than a normal startup.

  MacIntel: Reset of the controller (SMC) system management

  Reset the PRAM and NVRAM on your Mac.

  Repair the hard drive and permissions - El Capitan

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

  Repair

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab in the toolbar... If disk utility reports any errors that have been corrected, then re-run first aid until no errors are reported. Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.

  Now, download and reinstall OS X El Capitan 10.11.3 Combo Update.