Microsoft 8000 presenter mouse

Similar Questions

• try to connect microsoft 8000 presenter to my computer without the dongle. I need to connect without password. Does anyone have a suggestion? __

  I would like to know if there is any chance to connect without the dongle and the intellipoint software. When I use windows software apply an authentication key, and I think that the mouse do not need any code.

  Hello skaarmartin,

  Thank you for visiting the Microsoft answers community.

  I have not found a lot of information on this issue, but here is the link to some information that may be useful:

  http://social.technet.Microsoft.com/forums/en/itprovistahardware/thread/cb3c4590-dcb2-44ed-A258-57021a69ae30

  Not much, hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Drivers for Microsoft Wireless Notebook Presenter Mouse 8000

  To set up my new PC (the old map of his mother's dying), I found that I had the CD with drivers that match my Presenter Mouse 8000, and I would like to know how I can get the drivers from Microsoft, preferably via download.

  Hello Mike Alcivar,.

  You can get them here ,

  Just fill in the information and hit go and download the software for your mouse

  Thank you

  jlluitj Josh Luitjens - self-taught computer Techhttp://www.pchalp.com/

• Microsoft wireless notebook presenter mouse 8000 does not

  Original title: driver error.

  Hi, I can't get my presenter 8000 laptop wireless Microsoft mouse to work with the windows platform 8. I installed the drivers from the CD, but when I check the status on the screen "devices and printers", it shows a State of disk error. "  Is there an updated driver for this device I can use to make it work?

  Hi Toni,

  For you help I would be grateful if you could answer the following question:

  What is the full error message showing in Device Manager?

  Follow the troubleshooting methods and check.

  Method 1: Run the hardware and devices Troubleshooter and check.

  Follow the steps to run the Troubleshooter:

  (a) press the Windows key + W on your keyboard.

  (b) type of Troubleshooting , click Troubleshooting.

  (c) click on see all.

  (d) click on hardware and troubleshooting of devices.

  (e) click on the Next button to run the troubleshooter.

  Method 2: I suggest to uninstall and reinstall the drivers from the production site;

  Check out the link to download the drivers;

  http://www.Microsoft.com/hardware/en-in/d/wireless-notebook-Presenter-Mouse-8000

  Note: Select the appropriate operating system to download the drivers.

  Check out the link;

  Troubleshooting: mouse

  http://www.Microsoft.com/hardware/en-in/help/support/troubleshooting/mouse/wireless-Bluetooth

  If you need help with Windows, please do not hesitate to post. We will be happy to help you.

• Wireless Notebook Presenter Mouse 8000

  I have a Wireless Notebook Presenter Mouse 8000,
  the original USB transceiver broken.

  I had a co-worker who has mouse was broken.

  My mouse will pair with this "new" USB transceiver

  I understand that the mice and the Transceiver are matched at the factory.

  Is it possible for me to use this new transmitter/receiver?

  (PS the General functions of mouse work correctly when it is used with a Belkin Bluetooth Transceiver, but certain features are not,
  so I would use the MS USB Transceiver)

  BTW - used with a portable Windows XP

  Hello ETuckUte32,

  Thank you for using the Microsoft answers Forum.

  Yes, the devices are paired at the factory and generally cannot be used with another transmitter/receiver even if it comes from the same group of models or the manufacturer. I would say that it is not possible for you to use a transmitter/receiver from another device and operate it properly or maybe even not at all.

  If you can get some features with a totally different Bluetooth device, then it is perhaps the best, you'll be able to get the device. Find functions and features are reduced when you use the device with a transceiver that isn't made to go with this particular material.

  Hope this helps to answer your question.

  Judd
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Wireless Notebook Presenter Mouse 8000 will not enter pairing mode (part 2)

  I tried the fix in this issue here:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/wireless-notebook-Presenter-Mouse-8000-will-not/3a0df437-759e-436D-86FC-90bebf7069ac?tab=AllReplies&TM=1320144127818

  and it does not solve my problem - however the described issue is identical.
  My Presenter Mouse 8000 has a permanent green light on the bottom, pressing the button on the dongle (receiver) lance the pairing wizard who tells to press me the button of the mouse for 5 seconds - I followed these instructions and the unit is not pair.  I think (I remember) which she flashed red and green when it is matching, however in my case, the Green led is permanently on and not blinking.
  I changed the batteries for new ones - that has not fixed my problem
  I tried on another computer matching - this does not solve my problem
  I tried to install 3 different versions of the software (versions 8.0.25, the version on the CD that came with the mouse and the plus up to version 8.2 of the date), this does not solve my problem.
  This mouse has worked in the past-, so I do not understand why it would stop working now after a battery change?
  I'm on Windows 7 x 64 both computers, with that I tried to use the mouse.
  Are there measures other that I can take to solve this problem?
  Thanks in advance for your answer

  Hello

  Method 1:

  I suggest that you try to do a system restore and check whether the problem is resolved.

  In Windows 7 system restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Method 2:

  I suggest you update Bluetooth drivers on the computer and check:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If it still does not work, then it may be due to a defective material.

• Generic adapter Bluetooth doesn't work is no Presenter Mouse 8000

  I had this Microsoft Windows Wireless Presenter Mouse 8000 for several years and have enjoyed the work and general use. However, lately, I've had problems connecting with the mouse does not stay connected properly and it stops working. I moved the various Bluetooth USB adapter, but still nothing. I have "re-matched" the adapter to the mouse and this may work for a while, but then that is not.  Now, I get the message 'Generic Bluetooth adapter' Code 10, and even after you have reinstalled the software and the latest drivers, this problem has not been resolved.  Actually, it ceases to be worse that I had to use the Mr. Fix - it to find and reinstall other Bluetooth components.  After all, I've done, the challenge is still here... I'm getting an adapter generic Bluetooth could not install correctly and also get a Code 10 on the Bluetooth device RFComm.  I am very frustrated with this, and really need this mouse to work. What can I do to end this loop that I not of miracle!

  I use a HP Elitebook 8540p with 8 GB of ram, Windows 7 Ultimate and all systems updated through HP or Microsoft sites. I uninstalled and then reinstalled the latest version of the Microsoft software for the mouse (Intellipoint). Please, someone help!

  Thank you.

  Hi Larry,

  1. don't you make changes to the computer before this problem?

  Let us try these methods.

  Method 1.

  We can refer to this article and check if that helps.

  Mouse, touchpad and keyboard under Windows problems: http://windows.microsoft.com/en-in/windows/help/mouse-touchpad-and-keyboard-problems-in-windows

  Method 2.

  We can refer to this article and check if that helps.

  Support for Microsoft mouse, keyboards, LifeChat, LifeCam & more: http://support.microsoft.com/ph/7746#tab1

  Let us know if you need help with this question, we will be happy to offer you our help.

• Disconnects Presenter Mouse 8000 on Windows 7

  I have Win7 64-bit on Dell Vostro 3550. I bought a new mouse and installed all new webpage software MS. Souris was working very well connected after usig BT new device option. Unfortunately, after a minute or two mouse does not work. Even when I turn the mouse it is unable to reconnect with the computer via Bluetooth.

  I have the mouse: "Microsoft Wireless Notebook Presenter Mouse 8000" on my list of BT devices.

  It does not work even when I use the dongle of MS. But on the first tme, I installed all the software he has worked well with dongle. I want to use the mouse without dongle, my computer has connectivity BT.

  What should I check/install to fix the problem.

  PS.
  I changed the batteries twice.

  After having reinstalled drivers and Intel PRO once more works fine on WIN7. I hope it will be the same tomorrow.

• Bluetooth Stack for Windows by Toshiba with Microsoft Wireless Laser Mouse 8000

  I use the battery Bluetooth for Windows by Toshiba - Version v5.10.01 (T) and I am trying to connect to my Microsoft Wireless Laser Mouse 8000. But the Bluetooth stack does not even see the mouse.

  It only works with the dongle... but I don't want to use a dongle when I already have Bluetooth installed in my laptop.

  Any suggestions appreciated

  Hello
  Before starting any discussion can you please tell us which laptop model you have?

  BTW: What is your BT mouse has own dongle BT?

  See also http://aps.toshiba-tro.de/bluetooth/pages/faq/keyboardnotworking.html

  Good bye

• Microsoft Mobile Memory Mouse 8000 load

  Hello. I recently bought the Microsoft Mobile Memory Mouse 8000. Fantastic product. I love it and use it every day. I don't know how I managed without it.

  My question is about charge via the USB port. I understand that I connect the mouse using the trans-receiever USB and the magnetic cord. This loads the mouse very well and I can see the Green battery pulse light. My question is, how do I know when the mouse is fully charged? The light will stop throbbing? Please let me know.

  Thank you!

  Hi belami12,

  Thanks for the comments.

  Yes the light stops glowing. You can check the link below:http://www.microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=098&active_tab=systemRequirements

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• BT Presenter Mouse BT & Non - MS Dongle

  Hi - I have a HP DV6131 laptop with a Micro Bluetooth IOGear donge.  I use to connect / sync my Blackberry and have had no problems.  I just replaced my mouse USB MS with a MS BT Presenter Mouse 8000 and deleted then re-installed Intellipoint 6.3.  During this operation, I was prompted to insert the Dongle MS and I choose to use this foreign unit; mainly because of its size.  In any case, I could discover and connect with the mouse seems to work very well.  However, after installation of the MS my laptop mouse hangs at the initial POST screen.  If I remove the IOGear Dongle before you start and then insert it at the windows screen, everything goes & works well.  I updated the Broadcomm stack to the latest drivers without change.

  Any help would be appreciated.

  I rebooted the Microsoft mouse driver, and this seems to have solved my problem starting.  I was able to cold start and restart without problems, with the mouse, connection and functioning properly.  My Blackbery is also able to connect & synchronize via BT without problem.  This issue can be closed.

• Microsoft Explorer Mini Mouse stopped working a few days after installation

  Running Vista Home Premium.
  Microsoft Explorer Mini Mouse a few days ago.
  Worked perfectly.
  Today, it just stopped working - the mouse pointer disappeared and would not pass.
  This is a wireless mouse and the blu is always lit.
  Restarted Windows - no change.
  Use the USB differet for sender - message this driver installed correctly.
  No change.
  Used to another USB Wired mouse, worked.

  Hello

  Looks like the mouse has a problem.

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices

  Now look everywhere EXCEPT the USB controllers for your device (cannot be found) and if you find
  It RIGHT CLICK and UNINSTALL all. The device is your mouse or similar.

  now go to the USB and UNINSTALL ALL controllers in the category, but the category itself.

  RESET

  This refresh battery USB and hopefully it will allow the unit to install. Update the driver as needed.

  Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as all
  USB devices that you previously used. Run Options and check the 1st three choices to see if one is there.
  Try to remove all instances and restart then plug the drive.
  http://www.NirSoft.NET/utils/usb_devices_view.html

  ----------------------------------------------

  If no joy:

  The mini mouse has a 3 year warranty.

  Joystick - see guarantee near bottom of page
  http://www.Microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=002&active_tab=systemRequirements

  Warranty
  http://www.Microsoft.com/hardware/warranties.mspx

  Claims of Microsoft Hardware

  Hardware support of MS and warranty claims - 1-800-936-5700

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Microsoft Wireless Mobile Mouse 3500 problems.

  I'm using Windows vista 32-bit on a Dell Studio 15 laptop.  I have a Microsoft Wireless Mobile Mouse 3500.  I plugged the nano-receiver into my USB port and installed the driver but the mouse does not work.  It does not work if I move my mouse or click on the buttons.  I have bluetooth activated on my laptop but there is no button on the mouse or nano receiver to synchronize with the laptop.  I searched and searched the Internet to try to find an answer, but I don't see anything.  Can anyone help please?

  A couple of things you can look at at\try:

  1. Since beginning--> search box type mouse, when the application Microsoft Mouse appears select.
  2. Select the Dell Touchpad tab, then click on the picture to open the properties of the Touchpad.
  3. In the properties of the Touchpad, choose Device Select.
  4. Check the box that says "Disable touchpad/ponting stick when external USB mouse is present".
  5. Press OK.

  From my experience with Dell laptops, I have also found that sometimes an external USB mouse fails to be recognized because of some quirks with power and USB. Let the wired mouse, then turn off the laptop and unplug the battery for about two minutes. Turn on the machine again and see if the 'magical' mouse appears.

• Microsoft wireless laser mouse 8000__

  I have a microsoft 8000 wireless laser mouse.  the problem is that when I put it on the charger it flashes green for about a minute, then he made a flashing red fast.  If anyone can tell me what is the problem I would really appreciate it.  Thank you a_trekker

  I have a microsoft 8000 wireless laser mouse.  the problem is that when I put it on the charger it flashes green for about a minute, then he made a flashing red fast.  If anyone can tell me what is the problem I would really appreciate it.  Thank you a_trekker

  Hello

  http://www.Microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=084

  battery empty? or not connected? DoD you have intellipoint 7?

  have a nice day [url] [color = blue] www.microsoft.com/security download and install updates from Microsoft Update security! [/ Color] [url] [url] http://windows.microsoft.com/en-US/windows-vista/help/using [color = blue] Windows Vista: Top Solutions [/ color] [url] [url] http://www.windowslive.com/HowItWorks [color = green] how to use Windows Live [/ color] [url] [url] [color = blue] http://windows.microsoft.com/en-US/windows/help Windows Help & how-to [/ color] [url] [url] http://windows.microsoft.com/en-us/windows-vista/help/top-solutions [color = blue] Windows Vista: Top Solutions [/ color] [url] [url] http://www.microsoft.com/windows/internet-explorer/default.aspx [color = green] Internet Explorer 8 : Homepage [/ color] [url] [url] http://windows.microsoft.com/en-US/windows/help/internet-explorer?browser=ie8 [color = blue] Internet Explorer Help home [/ color] [url]

• I have problems with Microsoft 6to4 adapt reports tv_configmgrerr31 and also microsoft PS/2 mouse bring tv _ configmgrerr24

  Workin

  Symptom:	Device is not working properly. Windows cannot load the required device drivers.
  Cause:	A device has a configuration issue preventing it from working correctly.
  Details:	The device, the Microsoft 6to4 map, reports "tv_ConfigMgrErr31". This device won't be available until the problem is resolved. The Plug and Play ID for this device is ROOT\ * 6TO4MP\0004.
  Resolution:	1. check that the correct driver is installed.
  2. try updating the drivers using Windows Update.
  3. check with the manufacturer for an updated driver.
  4. try to uninstall and reinstall the device using Device Manager.
  Partners:	Explanation of generated by Device Manager Error Codes
  Manage devices in Windows
  Symptom:	Device is not present, not working not properly, or does not all its drivers installed.
  Cause:	A device has a configuration issue preventing it from working correctly.
  Details:	The device, Microsoft PS/2 mouse, reports "tv_ConfigMgrErr24". This device won't be available until the problem is resolved. The Plug and Play ID for this device is ACPI\PNP0F03\4-14DDEF44-0.
  Resolution:	1. check that the correct driver is installed.
  2. try updating the drivers using Windows Update.
  3. check with the manufacturer for an updated driver.
  4. try to uninstall and reinstall the device using Device Manager.
  Partners:	Explanation of generated by Device Manager Error Codes
  Manage devices in Windows

  Hello

  This error may occur if one or more of the following conditions are met:

  (a) there is a hardware problem or a new driver might be needed.

  (b) devices remain in this State if they have been prepared for removal. After you remove the device, this error disappears.

  Step 1: If the device does not work, make sure that the device is properly connected to your computer. For example, make sure that all cables are correctly installed, or that the cards are properly housed in their locations.

  Step 2: Run the following Microsoft Fix it.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us