Microsoft fix - it - 16977921-2147023843 error code

Similar Questions

• FIXIT GETS 16977921-2147023836 ERROR CODE

  After I recovered my system, I spent the last month download stuff against MS.  In desperation, I tried the FIXIT.
  It gets the error code: 16977921-2147023836 and help it.

  I can't most install .NET FRAMEWORK 2.0 and its SP 1 thereto.  The last attempt was an error: '.. '. could not connect to the database... "It was fun because my other mistakes were more like"... software does not correspond to the correct level... ". "or something like that.  Trying to get the levels of software to match, I installed a gazillion iterations of F.. NET here's what's on my system poor and tired:

  MS XP Media Center Edition (it gets errors all the time and I would delete it, if I were brave or more stupid that I am).
  Version 2002
  Service Pack 3

  THAT IS TO SAY 8.

  .NET framework:
  1.0 hot Fix
  1.0 (KB2742607) security update
  1.0 (KB2833951) security update
  1.1
  Customer profile 4
  4 scope (KB2487367 and KB2656351)
  Pack 4 mult-target

  When it comes to Media Center that gets consistently errors:
  MC, 2005 edition
  Rollup MC (KB873369)
  MC 2005 (KB888316)

  IN SUMMARY:
  My goal is to get the crazy 'a security update for Windows XP (KB973768) before I become.  All these other facilities were in a floundering trying to heal
  This failure.
  I hope that there is enough detail to give a clue as to where the bat to someone hurt.
  Thank you for any assistance you can provide.

  Roger,

  If you have installed .NET 3.5, then you already have the layers of version 2.0 and 3.0 since 3.5 is based on previous versions. It just adds new features each time.

• I can not install the "Security Update for Microsoft Silverlight (KB2636927) ' get the error code"656»»"

  I can not install the "Security Update for Microsoft Silverlight (KB2636927) ' get the error code"656»»"

  I would like to reinstall the version the most recent, but before to do that click on the "fixit for me" button on the bottom of the page to

  http://support.Microsoft.com/kb/2608523

  Latest version

  http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx

• a security update for microsoft works 8 kb977304 with error code 646

  Has had a warning of "new updates are available" in my pc - windows vista.

  Tried several times and IMPOSSIBLE to download MICROSOFT WORKS 8 KB977304 with error code 646.

  Help, please. Thank you

  merly888,

  See this thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/0c397230-26c6-4214-a5d1-3c99d2b2ef47>

  Please let us know if that helps.

  06/20 / 1107:45:19

• How to fix a DirectX fatal error code 3 DXGI ERROR not FOUND?

  How to fix a DirectX fatal error code 3 DXGI ERROR not FOUND?

  for just cause 2
  Please answer me before Monday

  If DirectX is up to date - you have a Direct X 10 graphics card? Just Cause 2 does not work on Direct X 9 graphics cards (perhaps the only game so far that will not use DX9) or Windows XP.

  The game should have reinstalled Direct X as the game has been installed. There is a folder for Direct X in Just Cause 2
  installation folder in your steam apps folder / Common. You could try to run the DXSETUP.exe from there.

  You can also use Windows Live X Web install-
  Download details: DirectX end-user performance

  It is useful to always include as much detail as possible when you ask a question, including the specifications of your system (not a great long DX diag, just a list of the main components - processor,)
  graphics card and the amount of RAM is quite generally).

• does anyone know how to fix the window with error code 80080005 updates

  can someone tell me where to go to get what I need to fix it is error 80080005

  Windows operating system?

  Windows XP perhaps-

  You may receive an error message that contains the "0x8DDD0018" code or the code '0 x 80246008' when you try to download the updates on the Microsoft Windows Update Web site or the Microsoft Update Web site
  http://support.Microsoft.com/kb/910337
  Windows could not start the service on the local computer's Background Intelligent Transfer. For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service particular-2147467243 error code. (0 x 80080005)
  error message is similar to the error message "error 5: access is denied." To resolve this problem, follow the steps described in the section "error 5: access is denied."

  This error indicates that access for FOREST permissions have been modified. To repair these access permissions, use one of the following methods, depending on the operating system.

  Windows XP

  1. Click Start, click run, type cmd, and then clickOK.
  2. Type the following command and press ENTER:
     SC tisb strands D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
  3. Click Start, click run, type services.msc and clickOK.
  4. Double-click on Background Intelligent Transfer Service.
  5. On the general tab, click Start.

  Or Maybe Vista:

  0 x 80080005 implies that Microsoft Installer is not configured correctly or it may have malfunctioned.

  Run the Startup Repair tool by using the Windows Vista installation disc

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212

  How to fix Windows Vista using Startup Repair automatically
  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Startup Repair frequently asked Questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Maybe Windows 7 .
  Open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Need help fixing windows update 80073712 error code.

  Whenever I try to check for any update I get error code 80073712. I am running windows vista as my operating system. Is there anyway that I can fix this?

  http://support.Microsoft.com/kb/957310

  Above Microsoft link has 3 methods ot try to fix your error Code >

  Method 1: Run (Checksur.exe) system update readiness tool

  1. Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

     For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:

     947821 (http://support.microsoft.com/kb/947821/) Description of the update readiness tool for Windows Vista system
  2. Try to install updates again.

  Note After running the tool, the Checksur.log file is stored in the following location:

  %SystemRoot%\Logs\CBS

  In a default installation of Windows Vista, SystemRoot is the Windows directory.

  If this method does not resolve the problem, go to method 2.

  Back to top

  Method 2: Install Windows Vista Service Pack 1 if you have not yet installed Windows Vista Service Pack 1 (SP1), visit the Microsoft Download Center and then download and install Service Pack 1. To do this, follow these steps:

  1. Quit all programs, and then click on the following link:
     http://www.Microsoft.com/downloads/details.aspx?FamilyId=f559842a-9c9b-4579-b64a-09146a0ba746&displaylang=en (http://www.microsoft.com/downloads/details.aspx?FamilyID=f559842a-9c9b-4579-b64a-09146a0ba746&DisplayLang=en)

     Note Click the option to download on the download page, click Save, and then save the download to your desktop. When the download process is complete, click run to install the SP1.

  2. Restart the computer.
  3. Try to download the updates again.

  If you can't always install updates, go to method 3.

  Back to top

  Method 3: Perform a repair of Windows Vista installation when you perform a repair installation, which restores the current installation of Windows Vista to the version on the installation DVD. This requires you to reinstall all updates that do not appear in this version of Windows Vista.

  To perform a repair of Windows Vista installation, follow these steps:

  1. Restart the computer.
  2. Insert the Windows Vista DVD into the DVD drive of the computer.

     Note If Windows does not automatically detect the DVD, click Start, type : \setup.exe in the Search box, and then click configuration in the list programs. Then click on install now.

  3. Click connect to get the latest updates for installation (recommended).
  4. Insert the product key if you are prompted to do so.
  5. Click to accept the Microsoft software license agreement.
  6. On the screen which type of installation you want , click upgrade.
  7. Once the installation is complete, restart the computer, and then try again to install updates.

  Mick Murphy - Microsoft partner

• Microsoft Security Essentials and Firewall error code 0 x 80070424

  I am a user of both Windows XP service pack.  I get the error code 0 x 80070424 every time I try to say Security Essentials to begin to monitor my computer.  I can't throw it as my windows either firewall.  It all started as a result of a virus/malware attack I could clean it with Malwarebytes.  I have was able to restart Windows Updates and went through several updates, the facilities and the re - start, but I still can't get Security Essentials or my firewall running.  I also ran Microsoft Fixit and yet the problem remains.  Help, please!  Thank you!

  Furthermore, I now use a new firewall from sygate and I also did a scan with temporary microsoft virus program and it come clean.

  Glenn

  Hello

  Method 1
  I suggest you run virus scan online by using the Microsoft safety scanner.

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: when you do an antivirus online, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.
  
  Method 2
  Error code 0 x 80070424 you describe also means "ERROR_SERVICE_DOES_NOT_EXIST". Windows Update depends on the following two services:

  (1) Windows Update
  (2) background Intelligent Transfer (BIT)

  If it turns out that these services are disabled or missing, you will encounter this error code. Therefore, you will need to ensure that the necessary services are available and running. Here's how:

  a. Click Start, click Run and type "services.msc".

  b. double-click on Background Intelligent Transfer Service.

  c. If the start State lists Stopped, click Start and then click OK.

  d. double-click Windows Update.

  e. If the start State lists Stopped, click Start and then click OK.

  f. double-click workstation.

  g. If the start State lists Stopped, click Start and then click OK.

  h. close the Services window and try to install updates again.

  Method 3
  I suggest you to scan SFC. Scan SFC will be scans all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

• Problems with Microsoft Tun Miniport Adapter #2 error (code 10)

  The difficulty to stay connected to internet connected then disconnected tried to download the new driver still having problem cant hook up directly to the modem. Don't know much about computers. Under the Advanced tab under ownership of what he says in virtue in white value network address. Is there something that belongs to it? And if so what happens at the end I put there. Under the general tab where it says place: unknown that is what belongs to it? I disabled it for now. Now I get the error code 22. He drives me to drink with all the problems I had. It's my laptop frist, it's one and a half years. What should I do? Help, please! Thank you. P.S. I am running VISTA HOME PREMIUM SERVICE PACK 2.

  OJ1007,
  Thank you for visiting the Microsoft Answers community forum.

  Disable IPv6:
  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack.  To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.»  Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.

  NOTE: You should do this for each network connection.

  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:
  http://support.Microsoft.com/kb/299357

  Let us know if this does not solve your problem.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Microsoft's Teredo tunneling device error Code 10

  I have an error against the peripheral Microsoft tunnelling teredo (does not start Code 10). I tried the update driver software option, but the computer has an error in the installation of the driver. I checked for Zone Alarm programs, but I don't have them on my PC. I use Windows 7 64-bit OS.

  I tried the fix described REGEDIT too, but I don't have any "Disabled components" in the pane right (as described in trouble).

  I have problems with my printer Epson Stylus Color 460 - is not printing. I tried several times to uninstall and reinstall the printer as well. I suspected all the stems of this problem with the piercing device driver. Could anyone help with any other suggestions? Thank you very much

  Hello, Gabriella,.

  Please keep us updated on the status of the issue.

  I'm sorry for the late reply. I appreciate your efforts to resolve the issue.

  For the printer problem, I suggest you try to install the printer driver in compatibility mode with Windows 7 and check if that helps.
  Please, use this link to download the printer driver.
  http://eSupport.Epson-Europe.com/ProductHome.aspx?LNG=en-GB&data=qBjAbS6NcI3HuZUJ4LNiQ3en9sCSaRpAhAAVlmxMhA4U003D&TC=6

  HOW to: Install a hardware device using the Compatibility Mode driver
  http://social.technet.Microsoft.com/forums/Windows/en-us/80cae5ee-dc98-4A2F-8284-a1ab826059b7/how-to-install-a-hardware-device-driver-using-compatibility-mode?Forum=w7itprohardware

  Device for Microsoft teredo tunneling, question I suggest you try using the steps described in Microsoft Knowledge base article.
  Reference:
  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows
  http://support.Microsoft.com/kb/943104

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  I hope this information helps.

  Thank you

• I can't download my pictures from my camera or from disk. I get an error code. Someone knows how to fix this? The error code is 0 x 80010108

  I can't download my pictures from my camera or from disk.
  I get an error code. Ox80010108
  Any help? Enjoy

  Hello

  1 when you download the pictures?

  I suggest that you put the computer to boot and then try to upload the image, follow step 1 to set the computer to boot.

  How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7 http://support.Microsoft.com/kb/929135
  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

• I can't install Windows updates security for Microsoft Office System 2007: 646 error Code

  I can not install the following Windows updates:
  Update for Microsoft Office System 2007 security:

  Update of security for Microsoft Office Excel 2007 (KB982308)
  Update of security for Microsoft Office InfoPath 2007 (KB979441)
  Update of security for Microsoft Office PowerPoint 2007 (KB982158)
  Update of security for Microsoft Office Word 2007 (KB982135)
  Update of security for Microsoft Office System 2007 (KB982312)
  Update of security for Microsoft Office System 2007 (KB982331)

  I get the error code 646.  If someone could help me, I would appreciate it.

  Hello

  Here's what I recommend you do:

  1. disable UAC (do this if you are using Vista or Windows 7, otherwise, go to step # 2). Comes down

  restrictions - turn it off completely.
  2 restart your computer for the change to take effect.
  3 re - download the update of security for Microsoft Office System 2007 (KB982331) from the link below:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=7f89a734-cda4-4abb-9a10-f6dfe560e8d0&displaylang=en
  4. install. It should work fine.
  5. If it still does not work, try to open all or part of your MS Office applications (such as MS Word, MS Excel, etc.).
  6. follow steps 3-4.
  7. If it still does not work, follow step # 3 again. After you download it, try unplugging your computer from

  Internet (unplug the internet cable or turn off the modem). Then, try to install the downloaded file

  (KB982331). It should work this time.

  Do the same for all the updates that come with KB982331, IF ANY.
  Let me know your results.

  WARNING: This is only a WORKAROUND and not a RESOLUTION. The resolution is displayed as soon as we have it.

• FATAL ERROR. We're sorry, but an internal error has occurred. Reinstall the product to fix the problem. Error code 1 /-3/10900. See Doc # 5305

  This message is displayed on the screen after Office has fully loaded.

  Now the question is... How can I identify "which' product needs to be reinstalled, and second, where do I find the" Doc # 5305?
  Just reply to * address email is removed from the privacy... * I'm completely lost on how to fix this...

  If it's really all the information that is available, you will have to resort to trial and error.

  Use Integrated System Configuration utility (start > run > msconfig > OK) or (better) Autoruns.

  In msconfig, click on the "Startup" tab  In Autoruns, click the 'connection '.

  In both cases, clear half of the entries and restart.  If the error does not appear, the program of the problem is in the half you disabled (by UNchecking).  Conversely, if the error appears, then the problem is in the half that you have not disabled.

  Keep narrowing things down halfway until you find the culprit.  Then uninstall it (and reinstall, if you still need it).

  Note that one or more programs in the startup list will be linked to your antivirus.  Either disconnect your computer from the Internet while you perform this troubleshooting or leave a / v program activated until you find the culprit (or conclude that it is one / v program itself that is causing the error).

  P.S.: A quick Google search for error code 1 /-3/10900 suggests that the problem may be related to Nero 7, so if you have that and it is configured to start when Windows starts, I disable that and see if the problem goes away.  To uninstall Nero, see http://www.nero.com/enu/tools-utilities.html

• When I run microsoft fix it I get error saying that the Recycle Bin is corrupted and not to set

  folders and programs disappear or stop work system restore will not work

  Hello

  ·        What Microsoft Fix it are you trying to run on the system and why you try to run the patch on the system?

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  ·        What is the exact error that you are experiencing?

  I suggest you follow the steps mentioned below.

  Method 1:

  I suggest you follow the steps mentioned in the article below and let us know if the problem is resolved.

  Error message: the trash on C:\ Is damaged or invalid. Don't you want to empty the Recycle Bin for this...

  http://support.Microsoft.com/kb/297760

  Method 2:

  Apart from that, I suggest you check in the clean boot state, if the problem persists. Follow the steps mentioned in the article below.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Method 3:

  I suggest to run a SFC (System File Checker) scan on the system and then check if the problem is resolved.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• #2 Microsoft Tun Miniport Adapter? Error code 10

  Hello guys! I couldn't connect to internet from my desktop computer. I found this error message for the Microsoft Tun Miniport «»

  Adapter 2 # "describing that the driver could not start. (Error code 10)

  I tried uninstalling the driver and then update but failed...

  I have a Windows Vista 32 bit and the model is SR5703WM

  Any help would be really appreciated :D

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

  Hardware devices not detected or does not
  http://support.Microsoft.com/GP/hardware_device_problems

  If the steps above fail I would say that you uninstall the network card and later visit the network adapter manufacturer's Web site and download and install the latest drivers for it and check that it works.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Or Gloria solution try found here

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/trouble-with-Microsoft-Tun-miniport-adapter-2/6d6698df-2b0d-4963-91b3-6f7d86044d64