Not able to hear the audio playback in Adobe PP

Similar Questions

• I am not able to hear the sound even if my drivers are installed properly in windows 7

  I am not able to hear the sound even if my drivers are installed properly in windows 7 and the test tone does not work for 1 month I am facing this problem please help.and windows media player also has a problem saying "Windows Media Player cannot access the file. "The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be not correct" Please help...
  I have media chip c with creative 5.1 speakers.
  until this works perfectly...
  I am facing this problem since I made a mistake.
  only, I went to run and went into 'msconfig '.
  After that, I marked start diagnosis then applied
  After having no repeat no sound...
  and then I clicked on normal start, but still I can't get my sound help please

  Hello

  1. What is the brand and model of your computer?

  2. this issue occurs when access to a particular file by using Windows Media Player?

  3. do you see red X on the volume icon in the notification area?

  4. are you able to access the files of music from the original location?

  You can follow the suggestions and then check.

  Solution A: For sound program on your computer.

  Method 1

  You can follow the steps listed below:

  a. right click on the volume icon in the notification area.

  b. go to the playback device and right click on the empty area.

  c. Select Show disabled devices and Show disconnected devices.

  d. right-click on the pregnant , select Activate and go to the Properties.

  e. use of the device select use this device (enabled)

  f. click apply and OK.

  Method 2

  Make sure that the Windows Audio service is started.

  a. click on start.

  (b) in the search box, type services

  c. right click on Windows Audio and go to Properties.

  d. Select Automatic from the Startup type drop down.

  e. click on start.

  f. click apply and OK.

  g. restart the computer.

  See also:

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Solution B: Due to Windows Media Player.

  Method 1

  You can run the troubleshooter in Windows Media Player.

  Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2

  You can address everyone on the file.

  a. right click on the file and click on Properties.

  (b) in the Properties window, click on Security tab.

  c. now, click on Edit , then click on Add.

  d. now, type everyone in the box and click OK.

  e. then check the full control box.

  f. click apply and then click OK

  See also:

  What are the permissions?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-permissions

• Im not able to install the desktop version of adobe story

  Im not able to install the desktop version of adobe story. Please help me with this.

  Hello

  You must have more (not free) story to be able to install the desktop application. If you are, you can simply go to "story.adobe.com" and install the application from the home page (you'll see an option 'Install desktop application' it).

  Let us know if you face any problem.

  Thank you

  Rashi

• No video but able to hear the audio for downloaded movies from Frostwire

  Original title: no video

  I downloaded a movie from frostwire, in my frstwire library but when I try to read all the that get is sound and no video.  what I am doing wrong?

  Hello

  1. How do you try to play videos on the computer?

  2. which video player do you use to play the videos?

  3. the problem occurs only for a particular video or videos?

  4. What is the format of the video you are trying to play on the computer?

  The content probably uses a compression codec that is not installed on your computer. To ensure you have all the codecs installed on your computer that are currently supported.

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  Please provide more information to help you best.

  See also the link to support Frostwire.

  www.FrostWire.com/support

  Note: this response contains the reference to a third party software. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

• Windows Media Player and not able to remove the audio file from playlist

  Song ghost Vista Windows Media Player 11 error

  I have Windows Media Player 11 on a laptop Toshiba with Windows Vista Home Premium Service Pack 2 on it, and I have a problem with that I can not resolve at all. There's a song that is on my reading list that does not even exist. He has no title, author or album. No size file and it does not even exist on my computer at all. No matter how I try I can not remove it from the selection. I know that I can not uninstall and reinstall WMP11 from my system it is a program integrated with no option to do so, but because of this I see also very troublesome that a reinstall is the only thing I can think of now to remove it.

  If anyone has any suggests how to uninstall this "ghost song", I'd be happy to try.

  Hi ClawMacKain,

  This problem occurs because the Windows Media Player library database is corrupted.

  To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:

  1. click onStart, click run, type %LOCALAPPDATA%\Microsoft\Media Player, and then clickOK.

  2 Select all the files in the folder, and then clickdelete on the file menu.
  Note You don't have to remove the folders that are in this folder.

  3. restart Windows Media Player.
  Note Windows Media Player automatically rebuilds the database.

  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  1. exit Windows Media Player.

  2. click onStart, click run, type %LOCALAPPDATA%\Microsoftand then clickOK.

  3. Select theMedia Player folder, and then click delete on thefile menu.

  4. restart Windows Media Player.
  Note Windows Media Player automatically rebuilds the database.

  You cannot view, add, or delete items in the library of Windows Media Player 11

  http://support.Microsoft.com/kb/925718

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Microsoft Lifecam vx 3000 - recipient not able to hear the sound

  I installed the LifeCam as stated but my recipient can't hear me.  We see each and I hear them, but they don't hear me.  Could someone please help.  I'm not really savvy in computer science, but I try.  Thank you.

  Hello

  I understand that you are facing problems with Microsoft Lifecam vx 3000.

  1. what program you use to video chat?
  2 have you tried to use this webcam with other programs?
  3. do you get an error message?

  I suggest to see the next procedure and check if it helps.

  Method 1:

  I suggest to run the hardware and devices Troubleshooter and check if it helps.

  Open the hardware and devices Troubleshooter

  
  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  
  Exercise the functions mentioned below to adjust the Microphone as default:

  1. Click Start and click on Control Panel.
  2. click on sound, then a new window will open.
  3. in the new windows, click on the 'Registration' tab and right click in the window and click Show disabled devices.
  4. now check if the Microphone is listed there and right-click on it and choose activate.
  5. Select the Microphone, and then click "Set as default".

  Note: Also in the playback check if the speaker is set as default. Method 3:

  Method 3:

  I suggest you to install the latest drivers for webcam If the problem persists.

  You can follow the link given below to download the driver for Windows 7

  http://www.Microsoft.com/hardware/en-in/d/LifeCam-VX-3000

  Reference:

  LifeCam problems

  http://www.Microsoft.com/hardware/en-in/help/support/troubleshooting/webcam/LifeCam-Setup

  Hope this solves the problem. If this problem persists, then please get back to us with the results of these methods and any additional information. We will be happy to help you.

• not able to hear the sound of the cellular caller

  my brother bought a Apple Watch 38 mm sport. But after the update to os 2.1 we couldn't here the voice of the caller please say a quick solution

  Rgds

  Ajith

  Hi asmaa

  It can help to turn off pairing your brother in a Bluetooth headset iPhone, if it is currently associated with it.

  Otherwise, it can help to restart the iPhone and his watch. Turn on both devices off the power together first, then restart the iPhone before you restart the Watch:

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

  -To switch on: press and hold the side button until you see the logo.

• Not able to play the fieles audio using Windows Media Player - error: Windows Media Player Error Message C00D11B1

  Sometimes the Audio files are not played using Windows Media Player. Even if I'm not able to turn on/off the audio. Settings audio button is not working too.

  Error: Windows Media Player Error Message C00D11B1

  When I rebooted my dell Inspiron laptop, this problem does not occur, and I am able to hear the audio. Let me know the fix for this problem permanently.

  Hello

  If you're having trouble playing a song or video, it may be because of the codec problem. I would suggest trying the following steps and check if it helps.

  Method 1:

  Run the Windows media player convenience store settings and check. Follow the steps to run the Troubleshooter:

  1. Press the Windows key + Q on your keyboard and type Troubleshooting and click Troubleshooting under results of research.
  2. Now, click on programs.
  3. Click the Windows media player settings to run the troubleshooter.
  4. Click on library of Windows media player to run the troubleshooter.

  Method 2:

  I suggest you to refer to the help article and check if it helps.

  Windows Media Player C00D11B1 error

  http://Windows.Microsoft.com/en-us/Windows7/C00D11B1

   

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Only able to hear the sound with headphones

  I am only able to hear the audio with headphones.

  Hello

  for some reason, I am only able to hear the sound of my laptop through my headphones. When I take the headphones on the speakers does not work! Help, please. This sux

  Go to control panel-> hardware and sound-> sound

  On the reading tab, turn on and set your speakers to laptop as the default device

  hope this helps

• I'm not able to get the sound card drivers for a sony VAIO desktop computer

  I'm not able to get the audio drivers for a sony VAIO desktopPCV 2253 someone can help me get t for free

  Hello

  Check with the Sony Support, their drivers and documentation online and ask in their forums.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  Sony - Forum
  https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• When I have videos on my calendar, they do not play in the screen of the monitor. I hear the audio but can't see the image. To test if my new files are somehow the problem, I went back and used video files that I have used successfully a year ago and th

  When I have videos on my calendar, they do not play in the screen of the monitor. I hear the audio but can't see the image. To test if my new files are somehow the problem, I went back and used video files that I have used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but don't see any video. Have I changed it some setting that controls video playback in the monitor window?

  Randy Ruttger

  Thanks for the follow-up.

  Missing in this equation are the Premiere Elements version you were using and the operating system on which it is running. But...

  The Act is accomplished. But... Up to now, and after that you went ahead and moved to version 12, we now learn what Premiere Elements version you were using. We don't yet know the operating system involved.

  You said first Elements 10. First 10 Elements is affected by a problem serious display known if the computer uses an NVIDIA GeForce video/graphics card card. In this issue, the only cure is to roll back the version of the driver about may 2013. The description of the problem and how to make the rear roller are described in one of the messages at the top of this forum. What video/graphics card your computer use?

  On another front, Adobe will release a new version of Premiere Elements any day now. Not one, but Adobe knows the function defined for the new version. This type of information is announced at the time of the release of the new version.

  So the solution to the problem you presented in this thread could have been...

  1 roll back the version of the NVIDIA GeForce driver for all may 2013 if possible (Windows 8 or 8.1 64 bit, maybe not possible)

  2. move to a different version of Premiere Elements (which you did)

  I offer the foregoing for consideration so that you can review your decisions. We are pleased to learn that the first items 12/12.1 works for you.

  Please do not hesitate to ask questions and seek clarification, but do not forget that the answers are in the details.

  Best wishes

  RTA

• Windows Media Player not able to burn the 80 minutes of audio

  MEDIA PLAYER NOT ABLE TO BURN THE 80 MINUTES OF AUDIO ON CD.

  I want to burn a 77-minute cd in media player and can not.   I add a playlist to the burnlist and Monte total autonomy than 77 minutes.  I use a 80 minute cd.  Media player automatically moves the last two songs on my playlist of 77 minutes and registered the disk "next".  I want to record the 77 minutes of music on a single cd.  Any suggestions?

  flustrated1, you use Windows Media Player to burn a CD, and if so, what is your WMP version? Where exactly did you select CD burning without gaps ? As far as I know, only WMP 12 supports CD burning. Tim Baets
  http://www.BM-productions.TK

• I tried to record some live audio. I downloaded Wondershare Streaming Audio Recorder I opened the program - but could not hear the audio I tried to play.

  original title: sound problems

  Hello!

  I tried to record some live audio. I downloaded

  Wondershare Streaming Audio Recorder

  I opened the program - but could not hear the audio that I tried to play. I don't know if downloading this program is related to the problem.
  I opened Skype - and everything worked fine. I could hear, etc. But if I run an MP3 in Windows Media Player - I hear nothing!
  My sound is at the top.
  In my Volume mixer, I see:
  1 output device digital (SPDIF) bounce up and down. (but I don't)
  2 but applications: sounds of Windows, Windows Media Player and Google Chrome will not move. (but they are at the top).
  Any suggestions?
  Jews

  I managed to get the results of work. I don't know where come the SPDIF.

  I downloaded a new driver Realtek for audio from the computer. This corrects the problem.
  But I still want to know what happened.

• Installed the driver for Lifechat lx300, but can not hear the audio in media player

  I have a new helmet. I installed the driver but can not hear the audio in media player

  Hello

  I suggest you to visit the links below that would solve your problem.

  Step 1: Turn sounds into the lifestyle cat helmet

  http://support.Microsoft.com/kb/935749

  Additional information: a. tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  b. no sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Hope this information is helpful and let me know if you need additional assistance.

• no noise from the window and not able to hear movies net movie

  No sound from the computer, not able to hear flck net movies

  The following link might be worth a visit:

  Windows 7 - no sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  (valid for XP - Vista - 7)