Microsoft. NET Framework problem
Five minutes after turning on my laptop, I get the following message: -.
Microsoft.Net Framework
"Unhandled exception has occurred in your application. If you click on continue, the application will ignore this error and attempt to continue. If you click on exit, the application closes immediately.
"String was not recognized as a valid time.
When I click on leave, the message does not appear again until I restart the computer.
What is the problem and how to fix it.
I use Windows Vista.
Hi tariqlaw
Thank you for using the Microsoft Answers Forums!
There are a few questions, I would like to ask to help you better:
Since when you receive this error message? Have you made changes to your system?
We can try a few steps to check if it works:
Step 1:
Put the computer in a clean boot (namely if any third-party software hinders the process)
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Check with step 1 (run a clean boot):-If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
Continue with the remaining steps to pin-point on the third party service.
(Note: after find you the problem causing the program, you will have to perhaps to update or install a newer version of the program and also don't forget to put the computer to a normal startup)
Step 2:
1. uninstall the .NET Framework that is installed on your system. To uninstall, go to Start -> type appwiz.cpl in the start-> programs and features windows search bar will appear. Select Microsoft. NETFramework and uninstall/remove it.
2. After uninstalling this version, we need to reinstall the latest version of .net 3.5 SP1. The link to download: http://www.microsoft.com/downloads/details.aspx?FamilyID=AB99342F-5D1A-413D-8319-81DA479AB0D7&displaylang=en
3. restart and check.
Hope this information was useful.
Let me know if it worked.
All the best!
Thank you and best regards,
R uma - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
After having downloaded and installed the new Firefox 4.0, I learned 2 extensions could not be installed. A notice would monitor the compatibility and availability and would notify me when those extensions are available. So who's going to happen, I prefer to use Norton Security when searching on the web and don't know what did Microsoft NET Framework, so don't know how important it is.
Symantec needs update their Firefox Add-ons to make them compatible with Firefox 4. They indicated that, for Norton 360, they plan to release a update of Norton 360 to support Firefox 4 in early may - http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web & docurl = 20100720113635EN & ln = en_US
I don't know about the time scale for the updates for other Norton products. Waiting for the update by Symantec, if you want to use Norton modules, you will need to downgrade to Firefox 3.6.
Downgrade to Firefox 3.6 first of all uninstall Firefox 4, but do not select the option 'remove my Firefox personal data '. If you select this option, it will delete your bookmarks, passwords and other user data.
Then you can install the latest version of Firefox 3.6 available to http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your favorite courses, passwords etc.
I recommend, to avoid possible problems with decommissioning, accessing your profile folder and delete the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Delete these files will force Firefox to rebuild the list of installed extensions, check their compatibility and cancel the toolbar customizations.
For more information on how to find your profile folder, see https://support.mozilla.com/kb/Profiles
Module additional Microsoft NET framework also supports ClickOnce, I never found any need.
-
When you try to install the update of security for Microsoft NET Framework 4 on Windows Vista (KB2160841) I get an error 66 a code, I can't identify the problem, I tried to install this update for some time (of the month) any other facility of updates without problem.
Take a look at this:
Windows update error .net framework 4 will not update - 66A error code
http://social.msdn.Microsoft.com/forums/is/netfxsetup/thread/02b7b01f-2a04-4352-AFEB-3a5250ebe0ef
For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem. -
At least once a day Microsoft net framework appears as an update? Why is it so?
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
What is a .net 4.0 security update?
If so, try this:
Credits go to jacvc and Control_tps (http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/ee945c20-a8c1-4b82-9b4c-d6dfae4c5337)
Try the following steps, please:
1. go in programs and features, click on it.
2. scroll to the bottom for Microsoft.Net Framework 4 Client Profile, do a right click.
3. we will give you a choice of uninstall/change, click it.
4. then it will give a choice to repair, choose repair. It will take about 4 to 10 minutes to repair (with my PC), your experience may vary.
5. Once finished, go to your update and new Update Center.
If this doesn't fix it, try to remove .net Framework 4.0 with the .NET Framework Cleanup Tool (http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx), reinstall .net Framework 4.0 and try to reinstall the update.
André
"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
Microsoft for Microsoft .NET Framework 1.1 SP1 security update
When enabled Microsoft update, the following message is received: the following updates have not been installed. "A security update for Microsoft. NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2656353. My operating system is Microsoft Windows XP Home addition. I tried Microsoft difficulty It Center, which has not corrected the problem. Help
Hello
· What tool Microsoft Fixit did you run?
· You get an error code?
· You are able to install some other updates?
Follow these methods and check if that helps.
Method 1:
You may need to repair your installation of .NET Framework, if you upgrade your operating system or if the installation of the current framework is damaged. This article explains how.
How to repair an installation existing.NET Framework
http://support.Microsoft.com/kb/306160/en-us
Method 2:
This describes step by step how to solve problems that you may experience when you install the .NET Framework 1.1 in Windows XP.
How to repair an installation existing.NET Framework
http://support.Microsoft.com/kb/824643
Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.
http://www.Microsoft.com/download/en/details.aspx?ID=33
Method 4:
To install this security update, you must have Microsoft Windows Installer 3.1 or a later version installed on the computer. For the latest version of Windows Installer for the computer, see the Microsoft Web site at the following address:
See also:
MS09-061: Description of the update of security for the Microsoft.NET Framework 1.1 Service Pack 1:13 October 2009
-
Microsoft NET Framework programs are indicated with a number in the box sizes when I go to the dialog box to uninstall but I don't know what they are and as they have Microsoft and NET in the titles, I think twice about uninstalling to win space in case they are something important. I have no idea what it is, never use it and if I don't need it would uninstall but I'm not sure I should because it might be important and actually run in the background while I use the pc for other tasks. Someone knows and can explain what are these programs? I appreciate it and appreciate help for an admitted car computer illiterate full below all new novice owner, trying to get the hang of it, but I'm trying! Thank you!
.NET framework components are required by many programs to work. They provide common functions for them.
http://en.Wikipedia.org/wiki/.NET_Framework
Why do you need to "save space"? Programs do not take a lot of space given the size of modern readers. The values shown in programs and features, are unfortunately often inaccurate.
If you are new to computers, avoid changing the way Windows is set up. It's the surest way to cause you problems. Relax and enjoy using the programs you like instead of worrying about what's going on under the hood.
-
I need assistance with Microsoft Net Framework 3.5 SP1!
An application requires Microsoft net framework 3.5 SP1 and download it as a whole to the top. 3.5 SP1 requires 3.5 which requires 3.0, which gives me this error:
You must use "Turn Windows features on or off" in Control Panel to install our Microsoft .NET Framework 3.0 configuration.
Here's my window "Turn Windows features on or off":
To solve the problems of installation of .NET Framework:
http://blogs.msdn.com/b/astebner/archive/2008/03/07/8108332.aspx
-
Microsoft NET Framework 3.5 is required to run the Catalyst Control Center.
Warning message
Microsoft NET Framework 3.5 is required to run the Catalyst Control Center.Please download and install the wedsite of Microsoft software.Hi LAMWah KA
I suggest you to download and install the .NET Framework 3.5 Redistributable or .NET Framework 3.5 SP1, then check if that helps you solve the problem-I hope this helps.
-
How can I get my Microsoft Net framework version 2.0 on my computer it say it s missing
WHENEVER I TURN ON MY COMPUTER IT SAY IS MY MICROSOFT NET FRAMEWORK VERSION 2.0 IS MISSING, HOW DO I PUT IT BACK ON MY COMPUTER?
Hello
According to the description, it seems that you get an error message that .NET Framework 2.0 is missing. I'll be happy to help you with this problem.
I suggest you to follow the steps suggested by "YiChun Chen" and check if the problem persists.
http://social.msdn.Microsoft.com/forums/en-us/netfxsetup/thread/fd1938c4-5771-4E51-bde0-1bafaf49c7e6/
It will be useful. -
Help!
I try to install peachtree for my online acct 110 class and I got a pop up saying that peachtree acct could not be started because of microsoft Net Framework 3.5 SP1 is missing or damaged. Would you lide to read the instructions for the installation of .net online now? I said yes and did, but was told by Deputy peachtree, after that it wasn't that I maybe shouldn't do that because my laptop has the circle start button in the lower left corner and has something to do with the hard drive. I don't know, but am trying to get this peachtree 2012 to work so I can start my classes. Can someone help me please?
RB_844
Because it was blue
In control Panel- programs
Select uninstall programs
Select Windows turn features on or off in the menu on the left side of the screen
Uncheck the box next to Microsoft .NET Framework 3.5.1
Click OK
Restart the PC
In control Panel- programs
Select uninstall programs
Select Windows turn features on or off in the menu on the left side of the screen
Check the following Microsoft .NET Framework 3.5.1
Click OK
Restart the PC
Run Windows updates
Check if the problem persists
-
fix for Microsoft net framework 3.5 sp1 for windows 8
I'll install the 13 ansys software in windows 8. I have problem that it asks to fix microsoft net framework 3.5 sp1, the fix for microsoft net framework 3.0 SP2, hotfix from microsoft net framework 2.0 Service Pack 2. What should you do? Please help me.
To me, he is asked for 3 different patches.
MS. NET Framework 2.0 SP2 patch
MS. NET Framework 3.0 SP2 patch
MS. NET Framework 3.5 SP1 patchWhere to get these fixes for windows 8?
-
Microsoft NET Framework 1.0 error when installing Corel PaintShop Photo Pro X 3.
OT: NET Framework 1.0
I installed Corel PaintShop Photo Pro X 3. It downloaded from the disc successfully but I cannot open the creation project. Windows I says error hae a Microsoft NET Framework 1.0. When I try to open the program (Corel) I get a message that the application has generated an exception that could not be treated. No registered JIT debugger was specified. Other programs on the disc open OK.Salvation by the Lake.
1. what operating system do you use?
I suggest you to ask your question in the form below for better support.
http://www.Corel.com/servlet/satellite/us/en/content/1152796555474 -
I need to install Microsoft NET Framework 3.5 Service Pack 1, as it is necessary to perform a Dell diagnostic Test, but I've been advised that: Setup has detected that this computer does not meet the requirements to install this software. Requirement: Windows install 3.1.
However, when I look at the download page of Windows Installer 3.1 is not actually as for XP with SP3. I tried anyway and: Setup has determined that the version of Service Pack for this system is newer than the update you are applying. There is no need to install this update. Well actually it is there...
Is there a way to get around this?
See below articles for solution
1 system requirements for the .net framework
http://msdn.Microsoft.com/library/8z6watww.aspx
2 download links for .net framework
http://www.Microsoft.com/net/download
or
http://msdn.Microsoft.com/en-us/library/5a4x27ek
3. top 8 resources for .net framework
http://www.Microsoft.com/net/itprofessionals
4 dependencies and Versions of .NET framework
http://msdn.Microsoft.com/library/bb822049.aspx
5 frequently asked questions
http://msdn2.Microsoft.com/en-us/netframework/aa497323.aspx6. management of versions, compatibility and run side-by-side in the .NET Framework
http://msdn2.Microsoft.com/en-us/netframework/aa497340.aspxGood luck
-
I'm trying to save space on my XP Home edition. I have Microsoft NET Framework 1 and 2.0 SP2 (191 MB) NET Framework 3.0 SP2 (182MB) & Net Framework 3.5 SP1 (30,66 MB) do I have all these or I can remove it at least one by thanking Gormaur
Hello
I suggest you to remove any version of Microsoft .net Framework, because it could affect the performance of the operating system.
You can use the disk cleanup utility to free hard disk space. See the steps in the following article:
Description of the tool in Windows XP disk cleanup.
-
I have microsoft net framework SP2 2.o... and sp2... msnf3.0 and msnf3.5 sp 1... and the microsoft compression client pack 1.0 for windows... should I all of this on my computer?
See:
What is the .NET Framework, and I need all these versions?
http://ask-Leo.com/what_is_the_net_framework_and_do_i_need_all_these_versions.html
Maybe you are looking for
-
If I sent the iphone imei you can unlock it
If I sent my iphone imei you can unlock my iphone Please
-
Firefox crashes when I open it and I can't open it in safe mode
Here's the crash id I hope they can be more detailed than what I'm typing BP-25faf820-3ada-4c6b-846f-a3c412130711 BP-d123fd1a-CD29-46f0-AC47-e29ff2130711 BP-04cbde72-6dd1-4344-89cd-f63d72130711 BP-a491faed-59C6-401F-8E38-802632130711 Here's the info.
-
Satellite Pro A200 - cannot install Windows 7 cause lack CD/DVD driver
Hello, I have a Satellite Pro A200, PSAE4E-046018N5 and I am trying to install Windows 7 but I can't go to step one because it is not found a driver:A message box saying: required A driver of currency for the CD/DVD drive is missing. If you have a dr
-
I upgraded my Razr Maxx to Jelly Bean, and everything seems to work perfectly with one minor exception to boring. The ringing of the phone will not stay where I put it, but keep coming back to 'Noisey One' which I used for a while, but had obtained e
-
Trying to install Vista Automated Installation Kit but no configuration, click on?
Instructions in the download page to install the Automated Installation Kit Window Vista, pasted below. I spoke to the long step 4 OK, but there is no "Windows AIK Setup" to clikck on. I missed something? are there missing steps? Thank you!! 1. click