Microsoft Plug - and - Go Nano transceiver

Similar Questions

• Dysfunctions of the Microsoft Wireless Mobile Mouse 4000 Nano transceiver... Burned my hand and melted!

  So this is the second of these that I had and both have experienced the same problem. They work great for a while (a while being a coupe of weeks) and then one day the computer just indicates that Windows does not recognize the device and it malfunctioned. Then, when I go to take the nano transceiver it burns my hand and blends almost. Please, someone tell me I can buy the nano transceiver separately. I now have two of them (well, Microsoft has replaced the first) and none works. I think that Microsoft won't keep replacing the entire unit for me, because they didn't need to send me the old one first. I would like to just buy some transceivers so that I can keep 'in stock' so to speak when they go wrong (if all goes well they won't be). It is a great mouse, it's just the transmitter/receiver that needs work. Thanks for any help!

  Transceivers are not sold separately therefore communicate with Microsoft and explain the problem.

  At the time of the first wired mouse for Internet Explorer, I got about 4 replaced at different times and never had to send it back.  I guess that the questions were grouped because finally they worked just, in fact two still work fine on the server PC that are average close to go wireless.

  Just be careful and don't ignite or burn.   I would add that I have the mouse BlueTrack Explorer on my desktop that works wonders and the Mini version on my netbook.  Both were perfectly executed.  I like the full size version because its rechargeable (when I remember to "anchor") so no more batteries wear out.

• can I use a microsoft wireless mouse 4000 bleutooth with a microsoft no nano Transceiver

  The nano microsoft tranciever overheated and stopped working. So I wonder if an another brand nano Transceiver can again function microsoft 4000 wireless mouse?

  Hello

  Transceiver nano Bluetooth USB (Universal Serial Bus) is a Plug-and-Play device, and it should work with Microsoft Bluetooth Mouse.

  I suggest to login and check if it works with Windows7 and let us know if you have any questions, so that we can better help you.

  If the Microsoft Mouse is under warranty then you can ask for the replacement of the mouse as it was affected by overheating.

  See the link below for more information.

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Dysfunctions of the Microsoft Wireless Mobile Mouse 4000 Nano transceiver

  Microsoft Wireless Mobile Mouse 4000 Nano transceiver malfunction, overheated and burned my hand, how to contact Microsoft and get a new mouse?

  I bought it on a year ago, worked well until the transceiver overheated and did not get recognized more by any pc.

  Hello

  The reasons of the overheating of the transceiver are not known, because it was not isolated incident, please go to the link provided below for more information on how to replace Microsoft software or hardware, order service packs and replace product manuals.

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

  You can also get in touch with Microsoft hardware support for assistance.

  Contact us

  http://www.Microsoft.com/hardware/en-us/support/contact-us

   

• Use microsoft nano transceiver for other bluetooth devices v2.0

  I bought a microsoft wireless mouse (3500) and wish to connect my wii-mote to my computer using the v2.0 of nano transceiver which is included with this mouse. However, I installed BlueSoleil and tried to turn on the bluetooth, but nothing happened. I think that this wireless mouse connects via bluetooth?

  And I tell you that the Bluetooth transceiver is NOT and cannot be used with any Bluetooth device...

  The Microsoft transceiver is paired 2.4 ghz Wireless USB adapter. It is NOT a Bluetooth device.

  Some people are mislead by the reference to BlueTrack that's why I talked...

• A Nano transceiver can be shared for keyboard Arc and 6000 wireless mouse?

  Hello

  I have two Microsoft wireless products: an Arc keyboard and mouse wireless 6000.

  They have both a wireless transceiver Nano using 2 USB Sockets.

  My question is: a Nano transceiver can be shared?

  Thank you!

  Jim Wang - MVP Dynamics CRM - http://jianwang.blogspot.com,http://www.mscrm.cn

  Hi Jim,.

  Sorry to inform you that Nano transceiver can be shared to 6000 wireless mouse and keyboard Arc because there will be defined for each devices frequency and by sharing the frequency will be inconsistent.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Microsoft Teredo Tunneling adapter does not work on my Windows 7 and cannot start. The Plug and Play ID for the device is 12.

  Anyone can guide me please by reinstalling my Microsoft Teredo Tunneling adapter for my Windows 7 operating system?  I ran a diagnosis of the system and says it can not start correctly and has a hardware failure. The Plug and Play ID for the device is 12.  I have problems to install it.

  Hello

  Try these solutions:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/how-do-i-reinstall-Teredo-tunneling-win-7/10ff26a2-fc53-4CDE-AE4C-3cd35f15e2e2

  How do I reinstall Teredo

• A nano transceiver can be shared for Arc and Arc Touch Mouse Keyboard. If so how...

  I bought the ARC keyboard and touch mouse. Both have individual separated Nano transceivers. I wish I could use a nano for two products transceiver. If the answer is Yes to my question. Can you explain HOW? Thank you

  Hello

  Nano transceiver can be shared to Arc keyboard and mouse. There is a frequency set for each device, and once shared, the frequency will be inconsistent.

• I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3.

  I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3. That did not help.

  Hello

  1. What version of Windows are you using?
  2. What is the brand and model of the computer?

  I suggest to run the patch from the following link and check the status of the issue.

  Hardware devices do not work or are not detected in Windows.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  If the problem persists, I suggest you to send us more information to help you better.

• How can I disable the mouse pad when you use a mouse plug-and-play?

  How can I disable the mouse pad when you use a mouse plug-and-play? I tried to disable the driver, and nothing works.

  Hello

  Check with support of the manufacturer system, documentation online or forums that there is probably
  Shortcut keys that enable and disable the touchpad functions.

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
  and some come with a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Error: "it is not possible to disable the connection at this time. "This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

  Original title: unable to disable my lan connection

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • I turn off my connection to the local network, it is showing message.

    It is not possible to disable the connection at this time. This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

    Please answer soon

    You have problems with programs

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi MVTDA,

  You can try the following methods and check to see if it helps:

  Method 1:

  a. Click Start and select run, type cmd and click OK.

  b. type net stop cryptsvc and press ENTER.

  c. type ren %systemroot%\System32\Catroot2 oldcatroot2, and then press the Enter key.

  d. restart the computer.

  e. open new command prompt and Type net start cryptsvc, and press ENTER.

  Method 2:

  If the same problem persists then you can try to uninstall the network drivers and check.

  a. click the Start button. Select run, type devmgmt.msc and press OK.

  b. Select the network card and right click on it.

  c. now, select Properties.

  d. in the Properties window, on the driver tab, click Uninstall.

  e. After you have uninstalled the drivers, restart the computer.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I can't install my camera in plug-and-play sanoxy.

  My camera plug-and-play will not work on computer. He told me that no driver is installed for this. What I'm doing. Camera did not come with installation disk.
  Thanks for the tips and please keep things simple as not very computer Savoy lol

  Hello

  Thanks for posting your query in Microsoft Community.

  The information that you have provided, I understand that you plug in and game camera does not work in Windows XP. I will certainly help you in this matter.

  1. What is the model number of your camera?

  2 have had any changes made to the computer before the show?

  Please follow the methods and check if it works very well

  Method 1:

  Install all the latest Windows updates and check if it works very well.

  See the link.

  http://www.update.Microsoft.com/microsoftupdate/v6/vistadefault.aspx?ln=en-us

  Method 2:

  Please visit the camera manufacturer websites to check the availability of drivers for Windows XP to install the same.

  See the link.

  http://sanoxy.com/support/tech-support/

  If you face problems more when working with Windows Mail on the Microsoft Community Forum.

• Why do I get a message "software you are installing has not passed Windows Logo test, such as Legacy Driver, Activity Monitor and driver plug-and-play

  WY the message about not to test the Windows Logo on these drivers as follows: Legacy Driver, Activity Monitor and no plug-and-play drivers

  Hi John,.

  Thanks for posting this question in the Microsoft Community.

  I'll certainly try and help you get the problem solved. Please provide us with some answers before proceeding.

  1. when exactly you get the error message?

  2. are you aware of any changes made to the computer before the show?

  This type of error message arises usually when the driver that you are trying to install has not passed the Windows logo test or is not approved by Microsoft.

  Here is a link with a few steps of good to help solve problems like yours. Go through the steps from 1 to 10 and check if that helps.

  Hope this helps and provide us more information if you need more assistance. We will be happy to help.

• can t get the dvd is plug and play no response

  For some reason any can t get dvd to the plug and play have teenager who could hepatitis changed something

  Hello

  1. What do you mean "t get to dvd don't plug n play no response"?

  2. using a cd/dvd external drive?

  3. what program you're using to play the dvd?

  If you use an external dvd drive and it is not detected, then run the hardware and devices Troubleshooter

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  If the DVD drive is detected and the disc is not read by the cd/dvd drive, follow

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  http://support.Microsoft.com/kb/321641

  Answer with the information required to help better.

• How to install and use a plug-and-play mini dvr/camera in windows xp?

  Forgive me, I have very little computer knowledge. I need step by step instructions on how to use a mini-dvr/camera "plug and play" in windows xp. How do I connect my dell d600 laptop? How to play what I recorded on it?  Thank you in advance for any help rendered.

  Hi, Fred Flintstone786,.

  ·         Have you tried to plug in the device?

  ·         The unit get recognized by the computer?

  Please see the following articles for more information on the Plug-and-Play devices:

  Overview of plug-and-Play

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/pnp_overview.mspx?mfr=true

   

  Installation overview of devices

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/hardware_installing_overview.mspx?mfr=true

   

  Get the Plug and Play device driver support

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/pnp_driver_support.mspx?mfr=true

   

  To reinstall a Plug-and-Play device

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/devmgr_reinstall_device.mspx?mfr=true

  Hope this information helps.