Microsoft Surface Pro - striking swiping does not work

Similar Questions

• I try to use a pro 7 product key offical windows to activate windows 10 pro, but it does not work?

  I try to use a pro 7 product key offical windows to activate windows 10 pro, but it does not work?

  If I search on possible improvements, he says it should work?

  Try the chat support:

  Activate your Windows 10 license with Microsoft Chat support

• Windows PC upgrade to 10. Try to install the first Pro CS5. Does not work.

  Windows PC upgrade to 10. Try to install the first Pro CS5. Does not work.

  Download the following messages: Exit Code: 7 please see the faults and warnings below for troubleshooting. For example, ERROR: DW050... WARNING: DW036, DW066...

  -0 fatal Error (s), 82 (s), 124 warning (s)

  Any idea?

  Thank you

  Jaap

  Do you have other Adobe applications installed on your computer?

  Navigate to C: > Program Files > Adobe.

  Open the Adobe folder and check if the Adobe Premiere pro CS5 folder is created with files stay inside?

  Let us know.

  As System File Checker run command once and see if \any system files are corrupt. As you had upgraded to Windows 10 we will check the system files once. Later we can try to provide full permissions for the required records.

  https://support.Microsoft.com/en-in/KB/929833

• try to do an update and it gives me an error code 80240016 and when i run Microsoft solve this trobuleshooter it does not work and tells me an occure\red error.

  try to do an update and it gives me an error code 80240016 and when i run Microsoft solve this trobuleshooter it does not work and tells me an occure\red error. How can I fix it?

  Hello

  1. what patch did you try?
  2. update you are trying to install?

  Method 1:
  You can follow the steps in troubleshooting this article and check:
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:
  You can also try the steps from the link:
  Windows Update, error 80240016
  Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.
  http://support.Microsoft.com/kb/957307

  Method 3:
  You can also perform a clean boot, and then try to install and check.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

• Free trial of Adobe Pro DC installation does not work why?

  Free trial of Adobe Pro DC installation does not work why?  The installation proceeds very slowly and simply makes anywhere between 11% and 40% before I get either a general "Error" message or one that says WebGet failed.

  I use Mac Yosemite and download of Firefox.

  You have downloaded the installer at the bottom of the link?

  Download Acrobat products | Standard, Pro | DC, XI, X

• Pro tools 8 does not work

  Pro tools Windows 7!

  Pro tools 8 downloaded from disk does not work. Download just digidesgn black screen with options of file etc to the upper left corner.
  Help

  Hello Bakk-24,

  Thank you for your message.  After a little research, I found that Pro Tools 8 is not completely compatible with Windows 7.  You can check compatibility with the link below.
  http://www.Digidesign.com/index.cfm?langid=100&Navid=54&Itemid=23954
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite A30, Win XP Pro SP3 - modem does not work

  Another problem with this laptop Satellite A30
  The built-in modem does not work.

  * Explanation: *.
  The driver is correct and downloaded from the Toshiba support site.
  The modem is identified as "Toshiba software modem amr" and is installed on com3 port.

  When I click on "diagnosis" and "ask modem" (right labels can be different, since my is an Italian win xp, I just translated the Italian labels), a window pops up saying: it is impossible to open the door (port), the modem is connected to.

  I tried to change the com port of the modem to different numbers, but the problem is the same.
  I don't know if the modem is a real map connected somehow to the main Board or is built right on the main map. It would be the first case, I may change see ad. BTW, the mini slot pci is already occupied by the gigabyte of Wi - Fi, so the modem must be elsewhere.

  This is strange, since I've done at least 2 other win xp pro on this machine facilities, always download and install the appropriate drivers, and the modem has never worked.
  Thank you
  S.

  Hello

  Have you installed the SP3 Windows XP Home edition, then the drivers or SP1 and later updated to level to the SP3 version?
  > It's strange, because I did it at least 2 other facilities on this machine pro win xp
  What other facilities?

• Satellite Pro L300 - touchpad does not work

  Hi all that I need help urgent because it drives me crazy. First of all, I use XP PRO. My laptop is fairly new, only around the age of 4 months, I had no problem with it at all. I formatted my laptop yesterday and reinstalled all the drivers that I downloaded here:

  http://www.ISD.Toshiba.com.au

  and everything works fine except the touchpad. I have already installed shared, utilitarian toggle the touchpad Module and I have the latest BIOS installed and reset all default settings and I made sure that the touchpad is enabled in the BIOS, but also pressing FN + F9 to enable during Windows.

  I installed the latest touchpad driver Synpatics I downloaded from the homepage of Synaptics. But for some reason any, that it does not work, I don't know what is the problem here. My touchpad worked before I formatted my laptop, it worked fine and has never had any problems. Will you please tell me what is wrong because I need to use my touchpad sometimes as well, so I can't use a mouse all the time.

  Hello

  > I installed the latest Synaptics touchpad driver that I downloaded from the home page of Synaptics
  I think that you question refers simply to the driver for the touchpad that is missing or incorrect.
  I put t know how it works on Toshiba notebook Australian, but the Toshiba European Satellite Pro L300 units needs touchpad different drivers. some use the Toshiba touchpad driver and some units need a driver for the Synaptics touchpad.

  In your case, I recommend this controlled again.

  By the way; My touchpad is always disabled so that en external mouse is connected.
  It is parameters that control it. Please check in your touchpad properties too!

• Satellite Pro M10 - infrared does not work properly

  Hello

  I have a Satellite Pro M10 and my infrared does not work. I downloaded the zip file with the drivers from this site. Then, I uninstalled and reinstalled, but it always happens in the Device Manager under "unknown - SMC IrCC - Fast Port infrared (IR Module: HP). (with an exclamation point). When I look at the properties it says under device status:

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Click Troubleshoot to start the troubleshooter for this device.

  However, under Driver Details is said:
  C:\windows\system32\DRIVERS\smcirda.sys

  I extracted the zip file in my home directory of c:\downloads\infrared.
  whatever I do, it does not now. It worked when I bought it, but I have too many things on the system for a new installation. Which brings me to another question. Is it possible to re - install windows without losing all your data, etc.? I did it with other systems (95,98) Windows. But it seems that the Toshiba recovery disc means any wiping.

  Thanks in advance for any help.
  Chris

  Hello

  If your HARD disk contains two partitions and you have saved the data on a second you can reinstall the operating system on the first partition using recovery DVDs.

• Satellite Pro 4270 - USB does not work

  Hello.

  I had this problem for a while, and I was wondering if anyone had any suggestions to solve this problem.

  I have more or less of work Satellite Pro 4270 (4200 Series) computer laptop with XP on it.

  The USB port does not work. I don't know why it does not work. I tried to replace the USB module on the motherboard that has not worked. I've updated the BIOS to the latest version, has not functioned. Removed and reinstalled the drivers in XP, not worked. I'm out of ideas.

  IrDA works very well.

  Some suggestions please. Thank you

  Hello!

  I understand, were you solder the module USB motherboard and then solder another module?

  I mean, what have you done with the module USB, replacing? Sorry, I don't remember exactly how the USB module is connected to my mobo SP4270 seen last about the half a year ago... If the welding, I don't wonder the problem... but if not, there may be a solution...

  Best regards

  Pete v.

• Satellite Pro 6100 Wireless does not work after restoring from HARD drive

  After that restore disks for installing a new HD and use and to update XP sp2, the Wireless does not work and if the card is installed XP hangs then works in fits and starts. If the card not in place, not bad at all.

  Booting from a Linux CD, the card works perfectly! I assume that the driver is the problem. The wireless card is the original, an Agere MPC13A-20/R, with Toshiba p/n PA317U-1MPC.

  I have found some drivers Agere, but am not sure

  (1) if they are correct
  (2) how to install since the machine works in a way limited with the card in place.

  Any advice?

  Hello

  I checked the page of the pilot and the only available for Windows XP WLan driver is the driver of v.1.11.108 Agere.

  (1) just try to install this driver. If the driver is not correct or is not compatible, then windows will not install the driver and you will receive a notification. You just have to try

  (2) generally you may reinstall the driver from the Device Manager. Open network controller tree, and then you can reinstall the driver.

  But this is only possible if the windows started successfully

  PS: Have you checked the information of Microsoft Windows XP SP2 update on the page of the Toshiba driver.
  I discovered that you need to update several utilities if you have installed SP2 on this laptop.

• Excite PRO 3G connection does not work after last update Android v4.3

  Hello

  I live in Italy and last Sunday (26 January) my excited PRO Tablet (model AT10LE - A - 10 H) received version Android 4.3.201121220.35.

  After restart my wifi works fine, all other app very well work, but my 3g connection does not work, mobile bar is empty and it says "no service".

  My sim card is ok. I used this sim card before the system update and I don't have a problem with Android 4.2.2.

  Please help me.
  Thank you

  > After reboot my wifi works fine, all other app very well work, but my 3g connection does not work, mobile bar is empty and it says "no service".

  Go to mobile network settings and search again for the 3G network.
  I had a similar problem with my Android Smartphone and my o2 provider
  I started to search for new, so I chose the O2 again and then I could solve the problem.

  In the case where this does not work for you, recommend you to reset the default Tablet (factory settings)

• Satellite Pro U400 - BT does not work after installing Win 7

  Hello.

  I have a problem with my bluetooth device. I have Toshiba Satellite Pro U400.
  My previous operating system was Windows Vista business and I just replace it with Windows 7.
  Since I installed it my device Bluetooth does not work anymore.

  I have had no problems with it with my previous Windows.
  Now, the following messages will appear: "Bluetooth stack for windows by Toshiba is incompatible with this version of windows" I have windows 7 Professional.

  I tried to update the drivers, but I was told that I have the best and latest drivers.

  Can someone help me?

  Hello

  Seems that you are still using an old battery Bluetooth.
  You this should remove the system and need to install a new one which you can download here:
  http://APS2.toshiba-tro.de/Bluetooth/

  You can find the pile of BT for Win 7 32 bit and 64 bit version

  Welcome them

• Microsoft Lifecam vx-3000 webcam does not work with all applications.

  Original title: lifecam vx-3000.

  LifeCam vx-3000, was used for years a couple works very well now it seems to work well for messenger and works when lifecam program is open however does not work if I try and use it on any other web site? Web cam starts picture freezes up with a still image or just empty. Yet once downloaded the software and drivers off microsoft site. Guess it is just a setting. Any suggestions?

  Thank you

  Hello

  1. have you made any hardware changes or software on the computer before this problem?

  2. what websites you are talking about?

  You can follow this link & check if the problem persists:

  Don't troubleshoot bad or no video or problems to start the LifeCam software

  Hope the helps of information.

• Microsoft Teredo Tunneling adapter device"does not work correctly.

  Hi Sir/Madam

  Hello, can you help me find driver problems, sir.i am on hp pavilion g6 Series notebook.i found this message there, Windows reports that the "Microsoft Teredo Tunneling adapter" device is working properly. But I opened the Device Manager and I found the icon and I double click and then try to update the driver software but I found ago encountered a problem... This device does not work... Sir can you help me solve this problem... Thank you for your time

  Hi Binet1,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP Pavilion g6-2225tu issues of driver for laptop and have on the Teredo Tunneling pseudo-interface. Right click and delete all Teredo Tunneling pseudo-interface. Restart the computer. You could update driver software by right click, browse computer for driver software. Select let me pick from a list of device on my computer-> network adapter drivers > Microsoft > adapter Microsoft Teredo tunneling.  You can enable system restore by following this document.

  I'd be happy to help you if necessary because there are many models of HPNotebook, I need the model number. How can I find my model number or product number?
  Please respond with an operating system that you are running:
  Operating system Windows am I running?

  Please let me know.

  Thank you.