Microsoft touch mouse hold - no driver and remains undetectable Windows 8

Similar Questions

• Microsoft touch mouse clicks do not work properly.

  Original title: Microsoft Touch Mouse

  I look forward to this for months and fortunately bought mouse yesterday. But I'm afraid I have to return within a few days because the right click is tiring, that I can't keep my finger on the left side if I am in the right click? have to raise that finger each time. No way to click. So by selecting windows without accidentally trigger something is a problem without a middle-click. It very quickly becomes a pain in the * after playing starcraft 2. Why is it not possible to customize the touch gestures? Another major failure. Other than these issues, it's a beautiful piece of engineering. My concerns will be adresed. or do I have to look elsewhere for a new versatile wireless mouse suitable for a left-handed person?

  Hi Premier69,

  You must contact Microsoft hardware support for assistance on this issue.

  Microsoft Hardware support

• Is Microsoft Touch Mouse Artist Series - 3KJ-00012 compatible with vista

  Is Microsoft Touch Mouse Artist Series - incompatible 3KJ-00012 with vista?

  Hello

  
  Welcome to the Microsoft Community Forums.
   
  
  I would like to inform you that the Microsoft Touch Mouse Artist Series - 3KJ-00012 is compatible with Windows Vista.
   
  
  You can also download the drivers for the mouse from the link provided.
  http://www.Microsoft.com/hardware/en-us/p/touch-mouse-limited-edition-artist-series#support
   
  
  If you need help with the Windows operating system, just tell me and we will be happy to help you

• Microsoft touch mouse problem.

  I have 3 Microsoft Touch Mouse White artist series.

  I use 2 different PC all in one and 1 not use because to back up only when one of them maybe broken

  My 2 pc a using windows 7 and the other using windows 8

  Before that, the mouse can function normally, even if I use the two together. I'm working on 2 PC and both can work well.

  One day there, at the beginning of the problem. my mouse to win8 dead. Blue light power off. No, not because the battery empty, because I got the new battery. I have try the button stop and once again, the blue light can again. but for a few minutes, died again. I have try off the button, sometimes can be downloaded on the blue light, but sometimes still dies.

  because I think that maybe the mouse broken. then I opened a new.

  First, for the work maybe 4 hours, the mouse works normally. but after that I have the same problem with my old touch mouse.

  because the 3rd (let say us the new 3rd) died too, I try again the 2nd mouse (mouse to win8 that first death). and hoola... can work again. Buat after 15 min... died again... I try the switch Off ON, can WE too. I have try the 3rd mouse... can be downloaded again... but after a few minutes... died again...

  After 2 days when I work only on pc win8, because not need use 2 pc, I realized when my mouse in win7 not ON / not to use my mouse to win8 posisition offshore, will work without problem...

  but when my mouse in win7, my mouse to win8 will have problem.

  Someone knows what happened... because this problem does not start. I already use the two together 8 months ago.

  And do not know why this can happen right now.

  Thank you

  Hello

  Thanks for posting your query on the Microsoft Community.

  I suggest you to follow the below methods and check

  Method 1: Run the troubleshooter of material and check out la.

  A convenience store is an automated tool that can find and automatically fix problems with your convenience store PCA is a tool automated which can find and automatically fix problems with your PC

  1. Press the Windows key + C on your keyboard to show the charms.

  2. Troubleshooting type, and then click Troubleshooting under settings.

  3. Select the material and audio and Audio -click and follow the instructions.

  If the problem persists, try Method 2

  Method 2: you can install the Mouse and keyboard Center and check if this is useful:

  Reference:

  https://www.Microsoft.com/hardware/en-in/d/touch-mouse

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Replacement of the transmitter/receiver of Microsoft touch mouse

  I was using the Microsoft touch mouse for weeks, but unfortunately I lost the USB transceiver, so I went through the Microsoft support page https://support.microsoft.com/en-gb/kb/326246. But his seems to be that the slides of link on this page does not work. How can I order the USB transmitter?

  Hello

  These should help:

  Microsoft Hardware
  https://www.Microsoft.com/accessories/en-us

  Microsoft Hardware - contact us including the phone numbers of the United States

  call the (866) 833-7088. In Canada, call the (800) 876-8533
  https://www.Microsoft.com/hardware/en-us/support/contact-us

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• I tried to format the C drive and then reinstall Windows Vista using the windows reinstall disk but I couldn't start in it.

  * Original title: reinstalling Windows Vista

  I tried to format the C drive and then reinstall Windows Vista using the windows reinstall disk but I couldn't start in it. I restarted my computer, press the F12 key and selected boot from cd/dvd, but the computer still started in windows. My computer is Dell. If there is no solution, it is possible to reinstall windows without using the disc?

  Hello

  Here are the options of relocation:

  How ro reinstall from the Dell recovery partition:

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=DSN_336966

  Reinstalling the printer Dell supplied disk:

  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=DSN_339949

  ______________________________________________

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Problem on Microsoft Touch mouse and Windows Vista

  I had a tactile mouse memory of Microsoft Corporation, and I use Windows Vista on my laptop.

  Of course, I know that this is exclusively for Windows 7, but I had no PC Windows 7.

  Until I open the box of the mouse, I would like to know if Vista can support the mouse with basic functions such as the left and do a right click, return and scrolling.

  If these basic functions are not supported under Vista, I have no choice and have to sell the touch mouse instead.

  So pls tell me what function will be supported.

  Or I have to install some kind of pilot...

  Thank you!

  Hello

  It would be best to contact the support team of Microsoft Hardware for more help on these issues. We have a dedicated team to help you with such questions.

  Microsoft Hardware Support: http://www.microsoft.com/hardware/en-us/support

  Hope the information is useful.

• Getures Microsoft Touch Mouse mouse does not.

  Hello

  I have problems with gestures not working not not on my newly acquired touch mouse.
  I fought to get their work when you first install the mouse. / i was not invited to install the intellipoint software when I plugged the mouse in my laptp for the first time. /It seemed to install just the generic driver, which of course gave only the basic features and no multi gesture support.
  I then downloaded and installed the software intellipoint from MS suite, but who also did not the gesture of support - even after the reboot!
  I have uninstalled the drivers, reinstalled the drivers, then miraculously appeared to be lucky, and gestures all worked – for a week, then stopped working again? Why this is happening and why the gestures do not work after installing the intellipoint software required? I am now lwft with basic functions and none of the gestures.
  I tried uninstalling, reinstalling, restart... the mouse would be defective? /It works, but just not gestures. I'm on a Windows 7 64-bit system.

  Hello

  Method 1: check if the required version of the intellipoint software is installed.

  http://www.Microsoft.com/hardware/en-us/d/touch-mouse
  http://www.Microsoft.com/hardware/en-us/downloads

  Method 2: clean boot the computer and check if the problem persists.

  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note: follow step 7 to reset the computer to start as usual after the boot process.

   

  http://support.Microsoft.com/kb/929135

  Method 3: If the problem persists while you can contact the Microsoft Hardware Technical Support for assistance.

  http://www.Microsoft.com/hardware/en-us/support

  Hope this information helps.

• Microsoft Touch Mouse mouse behaves badly

  When you try to scroll with my touch mouse from Microsoft (not), it closes all open windows and tries to stop Windows 7.  I'm not under any key assignment software (people had suggested AutoHotKey to emulate the Middle-click.

  This does not happen after a restart of Windows 7, but starts to occur randomly after the computer has restarted and Windows worked for awhile.

  Hello

  Did you change your computer?

  Method 1:

  Step 1:

  I suggest you check in safe mode.

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2:

  I also suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to follow the link and check.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  See also:

  Change the settings of the mouse

  http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings

• HDD problem IBM Thinkpad T42. I can't install NEW Hard Drive and NEW OEM Windows XP?

  Hi all

  When I turn on the notebook Windows XP starts up and everything is loaded. But after 5 or 10 minutes, the response is very slow. If I click on any window and try to open any folder, or open internet explore it takes about 1 or 2 minutes to respond. I tried several ways to scan disk and Defrag, but still that are of no use. I also tried 'Difficulty automatically File System Errors' and ' will search for and attempt recovery of bad sectors ", but this problem is still there. Even when I stop it takes too long to stop about 15 to 20 minutes.

  When I turn on again NEXT DAY Windows XP starts and everything loads quickly. After 5 or 10 minutes, the response is very slow. This problem occurs for a few days.

  I then used "IBM Rescue and Restore" to load fresh operating system. Still the problem does not get fixed.

  Can you get it someone please let me know if this is problem of hard disk or something else. I'm guessing it's related to the hard drive.

  If it is the drive hard problem how to save (clone) of this old hard drive AGAIN DISK (after buying) HARD.

  If I buy the NEW HARD DRIVE and CD/DVD of NEW OPERATING SYSTEM OEM VERSION it will work? Do existing mother board ALLOW to load a NEW VERSION of OS OEM?

  Thank you

  Contact the manufacturer of your computer, IBM and ask them to send a recovery disk/s XP set.

  Normally, they do this for a cost of $ small.

  Buy a new hard drive > Reinstall.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• I used a new hard drive and udated for windows 7, I have all the windows previous versios

  I got out my drive with XP and used windows 7 upgarde to the new drive and the activation key will not work without knowing that I had a previous windows.

  Should I charge one of my earlier version to make it work.

  on the previous version, it asks to put a previous version disc to check the upgrade

  Help!

  Thanks Carl

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• ProBook G1 430: Encrypted hard drive and the corrupt Windows Installation

  My laptop has an encrypted disc using HP drive encryption.  Recently, the Windows installation has become corrupted and I could not repair the installation using floppy disks to install Windows because they cannot access the encrypted drive, nor can they be accessed by other facilities of Windows if I plug in the external drive.  The two methods see the Windows partition as a RAW format.  I guess it's only because the partition is encrypted and has no way to determine the actual format type.

  I searched around to find clues as to how I could get past the encryption, but without success.  The computer is no longer under warranty, so I'm looking for options that will allow me to have access to the data.  The methods I've read all required the computer under warranty.

  I can still go through the encryption after the computer starts, but Windows Setup gives an error and tells me that I must use an installation disk to fix.  I have attached a picture of the screen of the error.

  I'd appreciate any help anyone could provide to solve this problem.

  After much patience and time on the phone with HP, I finally able to return the encrypted Windows installation.  They gave me a copy of the WinPE environment was a software that allows you to decrypt a partition which was encrypted with their software and execute commands Windows on it.  I then ran the repair bootbcd order and I was able to get Windows to start.  To obtain this software, my case should be escalated to tier 2 support.

• Desktop a6530f Pavilion, new hard drive and upgrade to Windows 7

  I have a desktop Pavilion a6530f with Vista.  My hard drive has been the production of errors, so I bought a new hard drive.  The original hard drive works pretty well as I should be able to create a recovery with a usb flash drive media.  I want to install the new hard drive (Seagate 1 TB SATA 3), and then install Windows 7 upgrade on the new drive.  Will be the ASUS M2N68 - LA / Narra3-GLBE motherboard supports SATA 3 (SATA 2 pilot courses)?  If Yes, where can I get the drivers?  Is there a Web page on the HP site for upgrade to Windows 7 on a new hard drive?  Or I just follow the guests after boot of the Windows 7 upgrade disc and enter the code of Vista product from the label on the side of the PC?

  Here are the specifications of your desktop HP Pavilion a6530f. Based on the specifications, this model shipped from the factory with Windows Vista Home Premium SP1 64-bit installed. This model supports the use of disks SATA 3, however transfer speeds will be limited to the rates for the motherboard SATA 2. No special drivers are required. Seagate 1 TB SATA 3 drive should work fine on this computer, but you may have problems using your HP recovery discs if the new drive is a Format "Advance" AF drive.

  It is unlikely that you will be able to create a recovery media on a USB FlashDrive with this computer. In my view, that this model only supports the creation of recovery DVDs.

  You have a choice of a couple of paths when it comes to the installation of Windows on your computer with a new hard drive installed.

  (1) use your HP Vista recovery disks to install Vista... This may or may not work depending on the new hard drive installed. Then, upgrade to Windows 7 using the upgrade disc and the Windows 7 product key printed on the certificate of authenticity provided with the Windows 7 upgrade disk. (Note: the key of Vista with Windows 7 will not work)

  (2) If you don't mind losing the "value-added" software HP originally installed on the computer, you can install Windows 7 without using Vista installed first. Install Windows 7 using the upgrade disc and the Windows 7 product key printed on the certificate of authenticity provided with the Windows 7 upgrade disk. (Do not enter the key during the installation of the window) (Note: the key of Vista with Windows 7 will not work)

  In both cases just follow the prompts as needed. I suggest to use Windows 7 SP1, because it seems to be more compatible with the new material, including readers of the AF.

  Please see HP - upgrade to Windows 7 customer care using basic upgrade or install Windows 7. Please see HP Forum - how to install Windows 7 without the disc for useful information and download for Windows 7.

  Please send Bravo

• Driver and software for Windows 8

  Anyone know where I can find the driver and the software for my printer Officejet 6500 has for Windows 8?

  At the moment there is no drivers currently available for Windows 8. Keep an eye on the forums that more information will be available.

• problem when installing bluetooth driver and software for windows 8

  I have a Samsung np355v5c-s05IN Laptop.I have windows 8 on my laptop pre-installed. Recently I reset my laptop then the Bluetooth driver and graphics software have been uninstalled. I got the software from Samsung which has helped me to install all the drivers and software is but he could not install the following Bluetooth and the driver. I have the software and the driver I tried to install manually but it was not original. I am enclosing pictures of errors. Please provide the solution for the same thing. I have a built-in Bluetooth of qualcomm atheros ar3012

  
  

  I found the solution. I uninstalled the unknown device in Device Manager. Then I deleted the bthport using cmd (Administrator). Then using the device manager that I scanned Bluetooth for windows and hardware changes automatically detected and installed the driver itself. But I want to know what was the main issue.