Microsoft Touch Mouse mouse behaves badly

Similar Questions

• Replacement of the transmitter/receiver of Microsoft touch mouse

  I was using the Microsoft touch mouse for weeks, but unfortunately I lost the USB transceiver, so I went through the Microsoft support page https://support.microsoft.com/en-gb/kb/326246. But his seems to be that the slides of link on this page does not work. How can I order the USB transmitter?

  Hello

  These should help:

  Microsoft Hardware
  https://www.Microsoft.com/accessories/en-us

  Microsoft Hardware - contact us including the phone numbers of the United States

  call the (866) 833-7088. In Canada, call the (800) 876-8533
  https://www.Microsoft.com/hardware/en-us/support/contact-us

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Microsoft touch mouse clicks do not work properly.

  Original title: Microsoft Touch Mouse

  I look forward to this for months and fortunately bought mouse yesterday. But I'm afraid I have to return within a few days because the right click is tiring, that I can't keep my finger on the left side if I am in the right click? have to raise that finger each time. No way to click. So by selecting windows without accidentally trigger something is a problem without a middle-click. It very quickly becomes a pain in the * after playing starcraft 2. Why is it not possible to customize the touch gestures? Another major failure. Other than these issues, it's a beautiful piece of engineering. My concerns will be adresed. or do I have to look elsewhere for a new versatile wireless mouse suitable for a left-handed person?

  Hi Premier69,

  You must contact Microsoft hardware support for assistance on this issue.

  Microsoft Hardware support

• Is Microsoft Touch Mouse Artist Series - 3KJ-00012 compatible with vista

  Is Microsoft Touch Mouse Artist Series - incompatible 3KJ-00012 with vista?

  Hello

  
  Welcome to the Microsoft Community Forums.
   
  
  I would like to inform you that the Microsoft Touch Mouse Artist Series - 3KJ-00012 is compatible with Windows Vista.
   
  
  You can also download the drivers for the mouse from the link provided.
  http://www.Microsoft.com/hardware/en-us/p/touch-mouse-limited-edition-artist-series#support
   
  
  If you need help with the Windows operating system, just tell me and we will be happy to help you

• Microsoft touch mouse problem.

  I have 3 Microsoft Touch Mouse White artist series.

  I use 2 different PC all in one and 1 not use because to back up only when one of them maybe broken

  My 2 pc a using windows 7 and the other using windows 8

  Before that, the mouse can function normally, even if I use the two together. I'm working on 2 PC and both can work well.

  One day there, at the beginning of the problem. my mouse to win8 dead. Blue light power off. No, not because the battery empty, because I got the new battery. I have try the button stop and once again, the blue light can again. but for a few minutes, died again. I have try off the button, sometimes can be downloaded on the blue light, but sometimes still dies.

  because I think that maybe the mouse broken. then I opened a new.

  First, for the work maybe 4 hours, the mouse works normally. but after that I have the same problem with my old touch mouse.

  because the 3rd (let say us the new 3rd) died too, I try again the 2nd mouse (mouse to win8 that first death). and hoola... can work again. Buat after 15 min... died again... I try the switch Off ON, can WE too. I have try the 3rd mouse... can be downloaded again... but after a few minutes... died again...

  After 2 days when I work only on pc win8, because not need use 2 pc, I realized when my mouse in win7 not ON / not to use my mouse to win8 posisition offshore, will work without problem...

  but when my mouse in win7, my mouse to win8 will have problem.

  Someone knows what happened... because this problem does not start. I already use the two together 8 months ago.

  And do not know why this can happen right now.

  Thank you

  Hello

  Thanks for posting your query on the Microsoft Community.

  I suggest you to follow the below methods and check

  Method 1: Run the troubleshooter of material and check out la.

  A convenience store is an automated tool that can find and automatically fix problems with your convenience store PCA is a tool automated which can find and automatically fix problems with your PC

  1. Press the Windows key + C on your keyboard to show the charms.

  2. Troubleshooting type, and then click Troubleshooting under settings.

  3. Select the material and audio and Audio -click and follow the instructions.

  If the problem persists, try Method 2

  Method 2: you can install the Mouse and keyboard Center and check if this is useful:

  Reference:

  https://www.Microsoft.com/hardware/en-in/d/touch-mouse

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Problem on Microsoft Touch mouse and Windows Vista

  I had a tactile mouse memory of Microsoft Corporation, and I use Windows Vista on my laptop.

  Of course, I know that this is exclusively for Windows 7, but I had no PC Windows 7.

  Until I open the box of the mouse, I would like to know if Vista can support the mouse with basic functions such as the left and do a right click, return and scrolling.

  If these basic functions are not supported under Vista, I have no choice and have to sell the touch mouse instead.

  So pls tell me what function will be supported.

  Or I have to install some kind of pilot...

  Thank you!

  Hello

  It would be best to contact the support team of Microsoft Hardware for more help on these issues. We have a dedicated team to help you with such questions.

  Microsoft Hardware Support: http://www.microsoft.com/hardware/en-us/support

  Hope the information is useful.

• Getures Microsoft Touch Mouse mouse does not.

  Hello

  I have problems with gestures not working not not on my newly acquired touch mouse.
  I fought to get their work when you first install the mouse. / i was not invited to install the intellipoint software when I plugged the mouse in my laptp for the first time. /It seemed to install just the generic driver, which of course gave only the basic features and no multi gesture support.
  I then downloaded and installed the software intellipoint from MS suite, but who also did not the gesture of support - even after the reboot!
  I have uninstalled the drivers, reinstalled the drivers, then miraculously appeared to be lucky, and gestures all worked – for a week, then stopped working again? Why this is happening and why the gestures do not work after installing the intellipoint software required? I am now lwft with basic functions and none of the gestures.
  I tried uninstalling, reinstalling, restart... the mouse would be defective? /It works, but just not gestures. I'm on a Windows 7 64-bit system.

  Hello

  Method 1: check if the required version of the intellipoint software is installed.

  http://www.Microsoft.com/hardware/en-us/d/touch-mouse
  http://www.Microsoft.com/hardware/en-us/downloads

  Method 2: clean boot the computer and check if the problem persists.

  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note: follow step 7 to reset the computer to start as usual after the boot process.

   

  http://support.Microsoft.com/kb/929135

  Method 3: If the problem persists while you can contact the Microsoft Hardware Technical Support for assistance.

  http://www.Microsoft.com/hardware/en-us/support

  Hope this information helps.

• Microsoft touch mouse hold - no driver and remains undetectable Windows 8

  My mouse wedge of Microsoft touch worked (Windows 8). However, it has stopped working for no apparent reason and cannot be detected. I uninstalled and reinstalled the download from the Microsoft Web site and followed the advice posted. Under the 'material' on my laptop, it indicates that no driver is installed for the device and that none are necessary. The material appears under devices in the Control Panel, but cannot be detected. Any ideas? No other Bluetooth device is connected (or power), and all updates are installed. Bluetooth is turned on and other devices are detected when they are on.

  Just managed to get on Microsoft Surface support.

  To reset the mouse to the corner and allow it to repair, hold don the power button until the light flashes. This resets the pairing.

  Worked fine after that.

  Thank you guys. Excellent service.

• Mouse behaves badly after the update MS Mouse and keyboard Center

  I use a model wireless MS Mouse 4000 and MS Mouse and keyboard Center 2.1.177.0 worm installed.  Since this update the scrolling behavior does not work correctly.  In a particular program (a simulation game), scrolling works much too fast.  If I go into the centre of keyboard and mouse and adjust the scrolling speed, it works well.  But when I restart the previous settings seem to be lost, so I have to put once again.  I use Win 7-64 bit.  The mouse worked fine before the 2.1.177.0 version.  Any suggestions?  TIA

  PS I vaguely recall a default update but can find no trace of that.  Running MS Mouse and keyboard Center seems normal.  There is no obvious command 'save settings', so I guess it does it automatically.

  Paul

  Hi Paul,.

  Thanks for posting your question on the Forums of community of Microsoft.

  Check out the link and follow the steps in the article:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398#appliesTo

  See also:

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/is-is/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows?T1=tab05

  Check out the link and check the number of the update has failed.

  See the Windows updates are installed

  http://Windows.Microsoft.com/is-is/Windows7/see-which-Windows-updates-are-installed

  If you are able to get the number of the update failed, try to install the updates manually.
  Reference:
  http://www.Microsoft.com/en-us/download/default.aspx

  Hope this solves the problem.

• Mouse behaves badly

  HP Touchsmart 520-1168 running Windows 8 Pro with Media Center

  My mouse seems to have a mind of its own, and the cursor will go to the lower left corner of the taskbar at random times.  It will open the program no matter what either is being in this place on the taskbar.  I tried to restore the system to an earlier time, I had no chance to make him stop doing it.

  Any suggestion would be appreciated.

  Hello again Cottontail.
  
  I hope you don't mind if I post the content of your message private here.  This will ensure that all other users looking for answers will know the results.
  
  "I tried a wired mouse this morning and it seems to work very well, when I turned on the mouse HP wireless, the problem has started up again."
  
  So, this means that the problem lies in the mouse itself because another piece of equipment works fine.  If the problem was software related the problem would persist in 99% of the time.  Your best bet is to replace the mouse.  If you want to check that the mouse had gone wrong you might try to use it on another computer.  If the problem persists it is certainly the mouse.
  
  If you have any questions, feel free to ask.  I wish you a great week!

• Microsoft arc touch mouse does not

  I bought a Microsoft arc touch mouse last month. It stopped working yesterday. I just replaced with two batteries and its not be turned on.

  Can you please let me know where I can fix this?

  I went to the transition in the United States two months ago and I bought this mouse from there via Amazon and now I am in India. It is for your information.

  Forward to your response.

  Thank you

  Touhami

  Hi Frank,.

  Is - this windows vista or windows 7?

  Follow the procedure mentioned below article:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  Reply back with more information for you to help

• Microsoft arc touch mouse driver does not

  Hi I just bought the Microsoft Arc Touch mouse for use with my MacBook Pro running Lion 10.7.4

  I have the driver installed and configured to my liking mac. What I notice is that the pilot/driver settings are not load at startup. If I leave the usb dongle is plugged in, the mouse preference pane Microsoft thinks that no mouse is connected. Once, I unplug and re - plug the dongle as load immediately the parameters and functions of the mouse properly.
  For the mouse be usable, I always unplug and re - plug in the usb dongle. Is it possible I can do these settings load?

  Hello

  The question you have posted is associated with Mac and would be better suited to the apple Mac community. Please visit the link below to find a community that will support what ask you:

  https://discussions.Apple.com/community/notebooks/MacBook

  You can also contact the Microsoft hardware device support for assistance:

  http://www.Microsoft.com/hardware/en-us/support/contact-us

• Microsoft Explorer Mouse Touch cannot set up

  Hi all, Microsoft,.

  You just bought a new Microsoft Explorer Touch mouse, but it cannot be used that the pointer does not move. Had installed the IntelliMouse 8.2 and this helped to recognize the USB transceiver only but the pointer does not move when the mouse is moved. IntelliMouse 8.2 is downloaded more than once from Microsoft and selected the version of windows xp and even after several reinstalls, the rest of the problem. (I use it on a HP laptop). I am suspecting that it is a flaw, but it was bought by internet I will return only after verifying the configuration of the device correctly. The mouse indicates green led when the switch is turned on for the first time but no led in the transmitter/receiver. Also tried to unplug the transceiver in the 3 USB ports but all the same. Also tried the mouse on another computer in Windows XP desktop and has the same problem. Laptops and PCs Office versions Windows XP SP2 or higher.

  Is there anything else I can do, or that the mouse is not compatible with Windows XP?
  Kind regards
  STL

  Hello

  You can follow this link & check if the problem persists:

  Common configuration of mouse problems

  I recommend contacting Microsoft hardware supports assistance.

  Hope the helps of information.

• Microsoft Arc Touch Mouse scrolling problem

  I have a Microsoft Arc Touch Mouse.  My problem is that when scrolling in the way of my index finger on the metal band, the page scrolls down, as it should, but then maintains a 'click' - same supplement with my index finger lifted well clear of the Strip.   This makes the reading of documents and emails a total boredom.  You reach the next starting point and the cursed thing jumps on another paragraph or two.  The driver is up-to-date.  The mouse is absolutely clean and the dirt and dust are not issues.  It's time to take this mouse has a few miles of the coast to see if it floats?  If anyone else has experienced this?   It would be great to fix because it's an uncomfortable thing to hold and I really like the way that batteries are registered by "flattening" of the mouse after use in order to turn it off.   Any advice would be welcome.   Frustratedly, David, NZ

  Hi David,

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  The problems with the mouse button or scroll the parameters

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  For reference: failure response troubleshooting wireless keyboard or mouse

• Reference location 11 Pro Dell loses the connection to Microsoft Arc Touch Mouse

  I have a coming 11 Pro with a Microsoft Arc Touch Mouse self. The mouse works fine for a while and just stops, then I have to turn on and off. Finally, I have to delete the device in the Bluetooth devices and re-pair. Sometimes, it takes a certain number of tests to get the venue for re - bind to the mouse. Everyone knows about this problem?

  Yes, I experience this problem with all Microsoft mice on Dell laptops. The only solution I found is to disable the power management on the radio of BT in Device Manager, possibly affecting the life of the battery. I even started a pension with Dell on this subject matter - they were send a guy to replace the chip...