Is Microsoft Touch Mouse Artist Series - 3KJ-00012 compatible with vista

Similar Questions

• Microsoft touch mouse problem.

  I have 3 Microsoft Touch Mouse White artist series.

  I use 2 different PC all in one and 1 not use because to back up only when one of them maybe broken

  My 2 pc a using windows 7 and the other using windows 8

  Before that, the mouse can function normally, even if I use the two together. I'm working on 2 PC and both can work well.

  One day there, at the beginning of the problem. my mouse to win8 dead. Blue light power off. No, not because the battery empty, because I got the new battery. I have try the button stop and once again, the blue light can again. but for a few minutes, died again. I have try off the button, sometimes can be downloaded on the blue light, but sometimes still dies.

  because I think that maybe the mouse broken. then I opened a new.

  First, for the work maybe 4 hours, the mouse works normally. but after that I have the same problem with my old touch mouse.

  because the 3rd (let say us the new 3rd) died too, I try again the 2nd mouse (mouse to win8 that first death). and hoola... can work again. Buat after 15 min... died again... I try the switch Off ON, can WE too. I have try the 3rd mouse... can be downloaded again... but after a few minutes... died again...

  After 2 days when I work only on pc win8, because not need use 2 pc, I realized when my mouse in win7 not ON / not to use my mouse to win8 posisition offshore, will work without problem...

  but when my mouse in win7, my mouse to win8 will have problem.

  Someone knows what happened... because this problem does not start. I already use the two together 8 months ago.

  And do not know why this can happen right now.

  Thank you

  Hello

  Thanks for posting your query on the Microsoft Community.

  I suggest you to follow the below methods and check

  Method 1: Run the troubleshooter of material and check out la.

  A convenience store is an automated tool that can find and automatically fix problems with your convenience store PCA is a tool automated which can find and automatically fix problems with your PC

  1. Press the Windows key + C on your keyboard to show the charms.

  2. Troubleshooting type, and then click Troubleshooting under settings.

  3. Select the material and audio and Audio -click and follow the instructions.

  If the problem persists, try Method 2

  Method 2: you can install the Mouse and keyboard Center and check if this is useful:

  Reference:

  https://www.Microsoft.com/hardware/en-in/d/touch-mouse

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Replacement of the transmitter/receiver of Microsoft touch mouse

  I was using the Microsoft touch mouse for weeks, but unfortunately I lost the USB transceiver, so I went through the Microsoft support page https://support.microsoft.com/en-gb/kb/326246. But his seems to be that the slides of link on this page does not work. How can I order the USB transmitter?

  Hello

  These should help:

  Microsoft Hardware
  https://www.Microsoft.com/accessories/en-us

  Microsoft Hardware - contact us including the phone numbers of the United States

  call the (866) 833-7088. In Canada, call the (800) 876-8533
  https://www.Microsoft.com/hardware/en-us/support/contact-us

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Microsoft touch mouse clicks do not work properly.

  Original title: Microsoft Touch Mouse

  I look forward to this for months and fortunately bought mouse yesterday. But I'm afraid I have to return within a few days because the right click is tiring, that I can't keep my finger on the left side if I am in the right click? have to raise that finger each time. No way to click. So by selecting windows without accidentally trigger something is a problem without a middle-click. It very quickly becomes a pain in the * after playing starcraft 2. Why is it not possible to customize the touch gestures? Another major failure. Other than these issues, it's a beautiful piece of engineering. My concerns will be adresed. or do I have to look elsewhere for a new versatile wireless mouse suitable for a left-handed person?

  Hi Premier69,

  You must contact Microsoft hardware support for assistance on this issue.

  Microsoft Hardware support

• The Lexmark 6500 series printer is compatible with Windows 8?

  Original title - devices

  The Lexmark 6500 series printer is compatible with Windows 8?

  Check it out here: http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/Home

  You will need to download the drivers for the Lexmark 8 victory if available

• The 300 series switches are compatible with detection of PoE before standard in old phones Cisco?

  The 300 series switches are compatible with detection of PoE before standard in old phones Cisco? They don't seem to be (7902G don't turn on when it is connected to a SF302-08MP with firmware version 1.1). What no need special configuration on the switch to enable this detection?

  Please note that the switches of the series 200 and 300 are now supported POE Legacy Cisco from September 2011, to provide power to 7960, 7940 and other phones standard pre and APs. Details on the following link:

  https://supportforums.Cisco.com/docs/doc-18337

• Microsoft Office 2000 (small business edition) is compatible with Windows 7?

  Windows 7 compatibility question

  Microsoft Office 2000 (small business edition) is compatible with Windows 7?  It is not on the compatibility list.

  Thank you.

  There are some reported problems running this version of Microsoft Office on Windows 7. Its also not certified for Windows 7, I suggest you move to a more recent version that works with Windows 7 as Office 2003 or later. Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• Problem on Microsoft Touch mouse and Windows Vista

  I had a tactile mouse memory of Microsoft Corporation, and I use Windows Vista on my laptop.

  Of course, I know that this is exclusively for Windows 7, but I had no PC Windows 7.

  Until I open the box of the mouse, I would like to know if Vista can support the mouse with basic functions such as the left and do a right click, return and scrolling.

  If these basic functions are not supported under Vista, I have no choice and have to sell the touch mouse instead.

  So pls tell me what function will be supported.

  Or I have to install some kind of pilot...

  Thank you!

  Hello

  It would be best to contact the support team of Microsoft Hardware for more help on these issues. We have a dedicated team to help you with such questions.

  Microsoft Hardware Support: http://www.microsoft.com/hardware/en-us/support

  Hope the information is useful.

• Getures Microsoft Touch Mouse mouse does not.

  Hello

  I have problems with gestures not working not not on my newly acquired touch mouse.
  I fought to get their work when you first install the mouse. / i was not invited to install the intellipoint software when I plugged the mouse in my laptp for the first time. /It seemed to install just the generic driver, which of course gave only the basic features and no multi gesture support.
  I then downloaded and installed the software intellipoint from MS suite, but who also did not the gesture of support - even after the reboot!
  I have uninstalled the drivers, reinstalled the drivers, then miraculously appeared to be lucky, and gestures all worked – for a week, then stopped working again? Why this is happening and why the gestures do not work after installing the intellipoint software required? I am now lwft with basic functions and none of the gestures.
  I tried uninstalling, reinstalling, restart... the mouse would be defective? /It works, but just not gestures. I'm on a Windows 7 64-bit system.

  Hello

  Method 1: check if the required version of the intellipoint software is installed.

  http://www.Microsoft.com/hardware/en-us/d/touch-mouse
  http://www.Microsoft.com/hardware/en-us/downloads

  Method 2: clean boot the computer and check if the problem persists.

  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note: follow step 7 to reset the computer to start as usual after the boot process.

   

  http://support.Microsoft.com/kb/929135

  Method 3: If the problem persists while you can contact the Microsoft Hardware Technical Support for assistance.

  http://www.Microsoft.com/hardware/en-us/support

  Hope this information helps.

• Microsoft Touch Mouse mouse behaves badly

  When you try to scroll with my touch mouse from Microsoft (not), it closes all open windows and tries to stop Windows 7.  I'm not under any key assignment software (people had suggested AutoHotKey to emulate the Middle-click.

  This does not happen after a restart of Windows 7, but starts to occur randomly after the computer has restarted and Windows worked for awhile.

  Hello

  Did you change your computer?

  Method 1:

  Step 1:

  I suggest you check in safe mode.

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2:

  I also suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to follow the link and check.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  See also:

  Change the settings of the mouse

  http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings

• Microsoft touch mouse hold - no driver and remains undetectable Windows 8

  My mouse wedge of Microsoft touch worked (Windows 8). However, it has stopped working for no apparent reason and cannot be detected. I uninstalled and reinstalled the download from the Microsoft Web site and followed the advice posted. Under the 'material' on my laptop, it indicates that no driver is installed for the device and that none are necessary. The material appears under devices in the Control Panel, but cannot be detected. Any ideas? No other Bluetooth device is connected (or power), and all updates are installed. Bluetooth is turned on and other devices are detected when they are on.

  Just managed to get on Microsoft Surface support.

  To reset the mouse to the corner and allow it to repair, hold don the power button until the light flashes. This resets the pairing.

  Worked fine after that.

  Thank you guys. Excellent service.

• My hp deskjet 1050 J410 series is not compatible with windows 8?

  I downloaded the new drivers and I am able to print with my printer HP deskjet 1050 J410 but I am not able to scan anydocumants. I can't open the HP printer Assistant window. The error reads as follows:

  Adobe reader software cannot open HPSPProgress.hta because it is not a supported file type or the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly decoded).

  I don't know if this has to do with my default programs or what happens. I am currently using 8 64-bit windows.

  Thank you

  Hello

  The doftware is fully compatible with Windows 8, the question appears because of the wrong configuration of your operating system to start the HTA with Adobe Reader files wrongly.

  Follow the steps below, this should solve the problem:

  1. Click the Windows (the key with the Windows Logo) key + keys X, and then open the Control Panel.
  2. Select programs.
  3. Under default programs, select make a file type always open in a specific program.
  4. Lecate and double click in the list .hta (HTML Application will appear in its description).
  5. Select Microsoft (R) HTML Application Host.
  6. If such an option does not appear, click Other Options.
  7. Click find another app on the PC at the bottom of the list.
  8. Navigate to C:\windows\system32 and select mshta.exe
  9. Click on Open, close all windows and then try to open the HP software.
     

• Microsoft mobile mouse 3000 works do not correctly under Vista

  I have a mouse Microsoft 3000, which is less than 3 months old. I replaced the battery. I used the reset button. However, the mouse will not turn on gree. indicating that the mouse works. I saw this question already on the Microsoft answers site. ILO is unable to find the solution. Can you help me?

  Hi Instructor4216,

  I recommend you to try the steps in the articles below. You can exclude what you have already tried.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  Troubleshoot a wireless mouse that does not correctly
  http://support.Microsoft.com/kb/321122

  If the problem persists, you get your mouse replaced.

  http://support.Microsoft.com/kb/326246/

  I hope this helps.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Deskjet 3050 has All - in - One J610 series is not compatible with mac os x 10.8 mountain lion. need help.

  Hi I have a HP Deskjet 3050 all-in-One J610 Series a as indicated in the title, and I have the operating system Mac OS x 10.8 Mountain Lion. I need help to get or install the software hp for printing wireless setup in my dorm. Any help is very appreciated.

  Hello

  I'm not not clear with your exact printer model, it is the printer Deskjet 3050 a (J611) or model 3050 (J610) ?

  For the Deskjet 3050 J610- a complete software not available at this time.

  As there is no comprehensive software available for Mountain Lion, you will need to set up a temporary ad hoc connection and then use the EWS printer to connect the printer to your router.

  • Press the button on the control panel wireless to display the options menu on the screen of the printer wireless.
  • Select on the screen of the printer's wireless settings, then Netowrk default settings.
  • Under the same wireless and select Radio wireless and make sure to put it on.
  • From your Mac, click the WiFi icon and then click on join another network.
  • Click view networks, select the printer SSID, it will include 3050 or J610 in its name, then click on join.
  • Allow 2-3 minutes to establish the connection.
  • Open Safari and click on the favorite icon ().
  • Hello-click and then click on the name of the printer, the EWS page appears.
  • Enter the network tab.
  • Less wireless (802.11) click Wireless Setup Wizard and then click Start the wizard and follow the steps on the screen to configure the wireless connection.
    Note: If you must provide the type of security for your wireless network, you can click the WiFi icon, click Network Preferences and select the Wi - Fi network. Click Advanced, and you will find the type of security for your network in the Wi - Fi tab.
  • Once the wizard of wireless via the integrated Web server configuration is complete, click the Wi - Fi of your Mac and you connect to your router again.

  Finally, go to System Preferences > print & Scan and add the printer. confirm all calls to get the drivers from Apple servers

  For the Deskjet 3050 has (J611), be sure to connect the printer with a USB port and follow the installation below:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-107372-1&cc=us&DLC=en&LC=en&OS=219&product=5061082&sw_lang=

  Please let me know of any problems,

  Shlomi

• my HP Officejet j4550 all in a series is not compatible with my windows 7 64 bit

  TRY TO DOWNLOAD THE DRIVERS TO BE ABLE TO USE MY PRINTER, A VERY DIFFICULT TIME

  Sunday, March 11, 2012, 10:00:14 + 0000, lori11 wrote:

  TRY TO DOWNLOAD THE DRIVERS TO BE ABLE TO USE MY PRINTER, A VERY DIFFICULT TIME

  Ouch! Please do not yell at us. We can hear you if you type normally,
  in different cases.

  What site web you trying to download? Please tell us what
  "HARD TIME" means. Exactly how do you try? What happens when
  you try? If you get an error message, please quote verbatim.

  Ken Blake, Microsoft MVP