Migration of interns of exchange 2003 to Microsoft Cloud Exchange

Similar Questions

• Access to the internal mail (Exchange) by centimeters remote VPN server

  Hi all

  I have a problem in the configuration of ASA 5510 to access my internal mail (Exchange) through remote access VPN server

  one... I have set up my D-Link ADSL router to port before the SMPTP (25) & POP3 (110) to the external interface of ASA 5510 (192.168.5.101 255.255.255.0)

  b. How can I configure ASA 5510 (using ASDM) to portforward (SMTP POP3 110 25) to my internal mail server with IP 192.168.50.2 255.255.255.0

  c. my internal LAN network (192.168.50.0 255.255.255.0) is coordinated at 10.1.1.0 255.255.255.224 for vpn clients

  d. my IP of mail server (192.168.50.2 255.255.255.0) will also be translated while clients are accessing content through remote VPN access

  e.What IP (Exchange of IP of the server (192.168.50.2) do I have to set up in Microsoft Outlook (incoming & outgoing mail server), vpn clients receive using a NAT IP 10.1.1.10

  Here's my configuration details of access remote vpn

  : Saved

  : Written by enable_15 at 13:42:51.243 UTC Thursday, November 27, 2008

  !

  ASA Version 7.0 (6)

  !

  hostname xxxx

  domain xxxx

  enable the encrypted password xxxxx

  XXXXX encrypted passwd

  names of

  DNS-guard

  !

  interface Ethernet0/0

  nameif outside

  security-level 0

  IP 192.168.5.101 255.255.255.0

  !

  interface Ethernet0/1

  nameif inside

  security-level 100

  IP 192.168.50.101 255.255.255.0

  !

  interface Ethernet0/2

  Shutdown

  No nameif

  no level of security

  !

  interface Management0/0

  nameif management

  security-level 100

  management only

  IP 192.168.1.1 255.255.255.0

  !

  passive FTP mode

  list of access inside the _nat0_outbound extended permits all ip 10.1.1.0 255.255.255.224

  allow a standard vpn access list

  outside_cryptomap_dyn_20 list of allowed ip extended access any 10.1.1.0 255.255.255.224

  vpn-ip-pool 10.1.1.10 mask - 255.255.255.0 IP local pool 10.1.1.25

  Global interface 10 (external)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 10 0.0.0.0 0.0.0.0

  Route outside 0.0.0.0 0.0.0.0 192.168.5.1 (D-Link ADSL router LAN IP) 1

  internal vpn group policy

  attributes of vpn group policy

  Split-tunnel-policy excludespecified

  Split-tunnel-network-list value vpn

  WebVPN

  xxxxx xxxx of encrypted password privilege 0 username

  attributes of username xxxxx

  Strategy-Group-VPN vpn

  WebVPN

  ASDM image disk0: / asdm - 508.bin

  don't allow no asdm history

  ARP timeout 14400

  Enable http server

  http 192.168.1.0 255.255.255.0 management

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set ESP-3DES-SHA edes-esp esp-sha-hmac

  Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA

  card outside_map 655535-isakmp ipsec crypto dynamic outside_dyn_map

  outside_map interface card crypto outside

  ISAKMP allows outside

  part of pre authentication ISAKMP policy 10

  ISAKMP policy 10 3des encryption

  ISAKMP policy 10 sha hash

  10 2 ISAKMP policy group

  ISAKMP life duration strategy 10 86400

  tunnel vpn ipsec-ra group type

  VPN tunnel-group general attributes

  ip vpn-pool address pool

  Group Policy - by default-vpn

  Tunnel vpn ipsec-attributes group

  pre-shared-key *.

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  management of 192.168.1.2 - dhcpd address 192.168.1.254

  dhcpd lease 3600

  dhcpd ping_timeout 50

  enable dhcpd management

  !

  Policy-map global_policy

  class inspection_default

  inspect the dns-length maximum 512

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  !

  global service-policy global_policy

  : end

  So can someone help me, how can I configure these tasks

  You can without problem

• Microsoft Office 2003 in Microsoft vista Ultimate icon display problem.

  Hello

  I have a computer laptop sony vaio with Windows Vista Ultimate Microsoft. I have connected to the external portable hard drive in Windows XP system as a hard drive. I got the backu. After that, I connected the hard drive of my laptop. then after Microsoft Office icons are not showing in correctly. its unknown icon of projection. but my office applications work properly. Can I recharge the icons as a same as before. I use office 2003.

  Can someone help me please.

  I don't know if it will work in these conditions, but you can try to rebuild the icon cache:http://www.vistax64.com/tutorials/117229-icon-cache-rebuild.html.

  If it does not, go to Windows Explorer and check C:\Program Files\Microsoft\Office\ (at this point I don't know what he could tell - perhaps Office 11 or something like that - because I don't have any more than the desktop version and I forgot how the folder structure is named - but you want the folder containining (, all the program icons to start the Office programs) and see if the executable program icons have changed as well.  If not, right-click on each one and then click on create a shortcut (desktop) - do it twice, so you will have one for the office and another to replace the one that is not going to start (and how much more you need based on the number of shortcut icons that you have).  If the icons of the programs also display incorrectly.

  If it does not, then there is no specific functionality of Ofice 2003 (or later versions) to simply change the icons to their original forms.  Try the repair Office option in the:http://support.microsoft.com/kb/821593.  One of the options included (that can be verified) is to restore the desktop shortcuts and which can solve the problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to make microsoft office 2003 to microsoft office 2007?

  How can I updgrade from microsoft office 2003 Microsoft office 2007?

  Is it free?

  Thank you very much!

  No, there is no free lunch.  You can buy the new upgrade version at http://www.amazon.com/s/ref=nb_sb_ss_i_5_18?url=search-alias%3Daps&field-keywords=microsoft+office+7+upgrade&sprefix=microsoft+office+7

• Migration Forms 6i to windows 2003 and linux redhat 5 32-bit

  Hello
  Our forms6i (no EBS) application is running on windows 2003.
  We would like to switch to Forms 11 g on linux redhat 5 32-bit.
  Is that what this migration is supported?
  Can help with the steps to migrate forms 6i to linux?
  Thank you

  Yoav,
  Take a look at Oracle Forms modernization Oracle Forms 6i with Oracle Forms 11 g. This document gives you all the information you need to perform the upgrade. As for moving from Windows to Linux, Oracle Forms is practically independent of the platform, because almost all the major operating systems are supported server. Take a look at The Documentation Oracle Forms and specifically the Forms Services Deployment Guide and the guides of Oracle Fusion Middleware Installation Guide for Oracle Portal, forms, reports and discoverer .

  Hope this helps,
  Craig B-)

  If someone useful or appropriate, please mark accordingly.

• Migrate from my Mac to a new, creative cloud displays an error, installation failed

  After the migration of all data from my old Mac to a new. Any transfer of data was successful, but the creative cloud displays an error:

  

  After downloading and trying to install here I get the following error:

  

  What do I need to do?

  Thanks for your help.

  You may need to modify the format.to file system support as Mac OS extended file system [logged]).

  Or try to install root user account.

  Let me know if you need steps.

  However, it is best to check with Apple Support once.

  Just for confirmation, contact Apple support immediately and confirm

  Contact Apple - Apple Support support

  For example:

  

• Is it possible to record a first project already registered in 2015.2 to revert to a 2015 so that my intern who doesn't have a cloud can work on it?

  I need help for a modified file back to an earlier if possible.  Someone knows how to do this?

  Hi Amy,

  OK, it says Adobe first Pro CC 2015 on its list of programs.  How can she perform the update?

  Two possibilities:

  1. If she has a student version and is not related to the account of the school, it can be updated via the creative cloud application.
     1. If the application still will not update, exit creative cloud and start once more.
     2. Try to update Premiere Pro once more.
  2. If the creative cloud is the educational version of the business, she may need to communicate with his school's COMPUTER administrator. Which it is installed for him.

  Thank you

  Kevin

• SBS 2003 migrating exchange 2003 to exchange 2010

  Hello

  It is possible o migrate from exchange 2003 on SBS 2003 to new windows server 2012 STD with exchange 2010, but does not move the FSMO rules to windows 2012? I can't downgrade SBS 2003 because I have an application that cannot be migrated from Small Business SERVER 2003.

  Best regards

  Marcio Moreira

  Try asking in Exchange Server Forums:
  http://social.technet.Microsoft.com/forums/Exchange/en-us/home?category=exchangeserve

• Swing Migration SBS 2003 to SBS 2008, media-related questions

  -We are migrating swing of old material sbs2003 Proliant ML110 hardware new sbs2008 Proliant ML350G6.

  - http://www.sbsmigration.com/

  -To perform the swing a third temporary server pc is required loads with Windows Server 2003 from SBS2003 and exchange Server 2003 media component

  -The temporary pc in our case is a dell optiplex 745

  -The problem is that the original SBS 2003 media is HP brand and that it will not install on the Dell server.

  -Work around was to use a trial version of Windows Server 2003 that boats on the Dell, but this version will not allow the installation of Exchange Server 2003 to the SBS 2003 Media Disc 2.

  -J' contacted Microsoft for an evaluation version of Exchange 2003, but it is now discontinued.

  -Another work around to order a NO brand Media Kit of Small Business SERVER 2003, but Microsoft will not provide because my original media is OEM.

  -Another book is about finding a Proliant ML110 of second hand. It's expensive and not an option, considering how much this project has cost so far.

  At this point, I'm stuck in the migration process, suggestions would be greatly appreciated.

  Hello

  That your computer is under domain, you must contact the TechNet forum, where we have of the support technicians who are well equipped with the knowledge on the issues of domain, do visit the link provided below.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

   

• Unity 4.0 (2) and /ForestPrep for Exchange 2003

  We plan to upgrade our Active Directory in Windows Server 2000 and Exchange 2000 to Exchange 2003 and Windows Server 2003 AD network. We currently have two unit 4.0 (2) servers (Unified Messaging) in two separate locations, each serving a different group of offices. All in all, we have more than 1,000 users in 5 different locations. All these users and locations upgrade to Windows 2003, Exchange 2003 and unity 4.0 (4) at the same time is not an option. Therefore, we would gradually migrate each location to Exchange 2003, Windows 2003 and unity 4.0 (4).

  I understand that unity 4.0 (4) is the recommended version to use with Windows 2003 and Exchange 2003, but I've also read in Cisco documentation as 4.0 (4) unit when running on Windows 2003 requires that you are already running Exchange 2003. What confronts a dilemma in that we have separate locations of mutiple supported by one server shared unity and we simply cannot risk all these sites simultaneously to unity 4.0 upgrade (4), Server 2003, and Exchange 2003. So, what would be the best strategy to go where we want to be? This brings me to the following questions:

  a. If we run / Exchange 2003 ForestPrep against our field now even if we are always unity 4.0 (2)?

  b. can we begin to introduce Exchange 2003 servers in each of our branches (administrative groups & routing Exchange) while staying at unity 4.0 (2) provided that these servers are not designated as a partner of unity and without voice mail server or connectors of the unit (for example, unity voice bridge connector) are on these servers?

  c. would make sense to upgrade the servers of the 4.0 unit (3) first and then move to unity 4.0 (4) once all the Exchange servers in all our branches have been improved in Server 2003 and Exchange 2003? This interim update seems to give us more flexibility in our path to upgrade its operating system to Microsoft Exchange server version requirements are less onerous

  Windows 2003 is not necessary for the 4.0 unit (4). Likewise, it is not recommended because there is evidence of the way in which Windows 2000 with the unit, but we do support Windows 2003 if the client really wants to use it. We ship the unit on Windows 2000 and that's what we recommend at this time. No functionality is lost under Windows 2000.

  Officially we do not support have all Exchange 2003 servers or even execution of ForestPrep if you have lower than 4.0 (3). That said, the only flaw we've never seen this is when the unit is connected under the local system or when the subscriber accounts are on Exchange 2003 servers. You wouldn't be the first customer to do so and it should be fine but really understand that it is not technically a Cisco tested and taken in charge of the configuration.

  Thank you

  Keith

• BlackBerry smartphones, Blackberry, Outlook 2003, Exchange Server 2003 H I...

  I don't know there is a simple put in place the configuration to solve these problems.  We have recently implemented a new Server Windows 2003 with Microsoft Exchange Server 2003.  There are 4 Blackberry users with different smartphone models.  This time management doesn't want to invest in the Blackberry Professional or Enterprise Server.  I am looking for a knowledge article that treats a configuration set to set up the following questions:

  1. Windows Server 2003 R2 with Microsoft Exchange Server 2003.  E-mail is delivered directly to the Microsoft Exchange Server.  No POP3 is used.
  2. We have ability to create of MX and a records additional.
  3. Blackberry users are dispersed throughout all of the United States using Verizon Wireless as their company.
  4. Some have jobs, some with laptops.
  5. In the office where the Microsoft Exchange Server, users connect through a VPN connection.
  6. Some users have Blackberry Desktop Manager and Blackberry Redirector installed.
  7. Users want their Blackberries to send and receive emails, appointments, sync with Outlook 2003.
  8. Receive email communication internal to other users of the network on their Blackberries.

  Any suggestions would be greatly appreciated.  Thanks in advance for your help.

  My life on a... complicated Blackberry

  http://NA.BlackBerry.com/eng/services/professional/

  This is the link and you can keep on the purchase of license keys and add several users up to 30 max.

• My mail is migrated to a new system, server and they have adopted Microsoft Outlook which is terrible. I use Thunderbird for 20 years and loved.

  When my main mail server migrated to a new system, they used Microsoft Outlook to organize my email. I used it for almost 2 months and it's awful. I would like to restore my old Thunderbird program. It seems to be working: I get the number of messages in my Inbox on the Thunderbird icon and an audio invites all new messages are received. The only problem is that I can't get in my mail because Thunderbird will accept none of the passwords that I offer (I only have three). Can someone please fix it so I can reset my password or have Thunderbird recognize one of my passwords? The main server wants to open a new account in Thunderbird, but it means that I lose all the data from the old account.

  Thanks for any help you can provide.

  Your, Eugene Eoyang

  Create folders in the "Local folders" intends to organize e-mail.
  Move all the emails from the email account in folders in local folders.
  When emails are in local folders, you can delete the old account.
  Tools > accounts settings
  Select the old account
  Click on "Actions account."
  Select 'delete account '.

  Click on "Actions account."
  Select 'add account '.
  Enter the name, email address and password
  Click on continue
  Make sure that the appropriate type has been selected for example: pop or imap

  If necessary, use the "Manual Configuration" button to enter the server settings
  Click 'Done' to create the new e-mail account.

• How can I fix failed update of security for Microsoft Office PowerPoint Viewer 2003 (KB956500)

  repeated failers and message does not disappear. auomatic I tried to fix it for me too. problem is not resolved. Thank you

  Remove your MS Powerpoint Viewer 2003 and install a more recent version of the Powerpoint Viewer. The update is most likely a failure because it cannot find the original installation files...

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=13

  This download works with presentations created in the following Microsoft Office programs:
  

  • Microsoft PowerPoint 2010
  • Microsoft Office PowerPoint 2007
  • Microsoft Office PowerPoint 2003
  • Microsoft PowerPoint 2002
  • Microsoft PowerPoint 2000
  • Microsoft PowerPoint 97

• I just got a phone call (no number came as international) to say that Microsoft

  I just got a phone call (no number came came as international) claiming to be from Microsoft and Muicrosoft are aware that my PC has programs that can cause my PC unwanted crash. They then asked me to turn on my pc while they could repair. This looks like a scam to me. Has anyone else had this type of call. I asked a lot of questions and the appellant was very vauge but insisting my PC was going to crash. The appellant gave me a number of 1786 6001340 I asked the appellant to put all this information in an e-mail message, which he said he would. We'll see if it happens. I think it is yet another scam that other users take note.

  It is a common scam. Do not let them give any info, do not give access to your PC, not give them all the money and do not go to all the websites that they suggest. One moment. See:

  http://www.microsoft.com/en-gb/security/online-privacy/msname.aspx .

  Microsoft does ever not requested for calls.

  (such persons may use names other than Microsoft as well)

• EXCHANGE SERVER MIGRATION PROBLEM

  Unity 4.0 (4) SR1

  Exchange 2000 BOX

  Users were migrated to an older exchange server, less stable, to a new through the usual advertising------change of method of moving users from one server to another.

  The old server is still in place and active.

  When it breaks down, the UNIT is unable to deliver messages to subscribers.

  Do I have to re - run exchange on the unit configuration wizard to define the new server as the main? Otherwise, any ideas why the old server to be up? What is the workaround-difficulty?

  Moreover, this most recent server will be upgraded to EX2K3 in the coming months. What needs to be done to the unit to perform this update (I'm looking for a link to the PDF here)

  Thank you

  mast

  The unit is oriented to the old server server partner. Please see this guide:

  Changing the swap Server

  http://www.Cisco.com/en/us/products/SW/voicesw/ps2237/products_upgrade_guides_chapter09186a0080205a7f.html

  The tool that you will run is Configuration of Message Store assistant

  For your second question:

  Upgrading Exchange on the Cisco Unity system

  http://www.Cisco.com/en/us/products/SW/voicesw/ps2237/products_upgrade_guides_chapter09186a0080205a8b.html#wp1038652