Minerals of Agile conflicted PG & C module

Similar Questions

• Agilent 34952 API has module

  Hello
  I use Agilent 34952 module 34980A multifunctional SW/measurement unit. I have read the information on "the use of third-party products" and applied. In the part of session of driver, there are two files for 34980A and 34952 a.. I created the driver and logical name for 34980A session. But for 34952A, in the part of the pilot session, I chose 34952 and nothing (IviSwtch & IviDriver) appeared on API section provided but produces appropriate appears as 34980. However, I created the session logical name & driver. And he made no mistake. However, I could not see DIO, Totalizer on the screen. How can I realize this problem?

  I'm confused as to what you are doing. Switch Executive will support the 34980 with the appropriate modules (i.e., muc, etc.), but I do not see how it would support the digital I/o module because it is not part of the switch class. Frankly, I'm not sure that the digital I/o fits into any class IVI.

  OR Switch Executive would be used with other programs such as TestStand and LabVIEW. What master program do you use? From there, you should be able to call the specific driver of 34980 and control inputs and outputs digital.

• Conflict between the module session and seminar event

  Hello

  We use a 100 Adobe Connect license webinar and module Adobe Event. We have the following problem.

  -Seminar room AI availlable and well structured

  -Using the Event Module to schedule an event (works fine)

  -Return to the seminar room to open a session of seminar (for better viewing, for the same regular time)

  -Seminar session scheduling failed (conflict with a scheduled event of Module Event)

  Question:

  An event, planned with the Adobe events Module, having the same rights like a seminar (planned as an event inside the seminar room regular seminar).

  I'm not sure that the Adobe events Module takes the same options as the seminar session planner standard.

  If all goes well, there is an expert, who can help me solve this issue.

  Best greetings from Hamburg,

  Martin

  Planning an event in a room of seminar with the events module creates the session of the seminar. I remember that is not present in the list of future sessions.

  The feature you explain is so as expected with Connect. This way you don't have to plan the event twice, or get caught in a bad situation, because you created the event but didn't provide for the session.

• On control of document in PLM

  Hello

  I'm new to the Agile PLM. I need to know if there is any available in Agile PLM document control module. If Yes please give me some advice.

  Thank you

  N

  PLM4P offers DRL (Document Reference Library) and collections of documents on individual objects as specifications.

  You can learn more about these features in the GSM guides and DAY lights.

  PLM4P also offers an extension of URL that allows punching your own document management system.   This feature allows you to activate a button 'Browse' next to the URL field.  You can use this button to open a document management system and fill in the URL with a link to the item in document management.

  I would like to know if you have specific questions.

  Thank you

  Kelly

• There will be a conflict between the two functional modules of a 2010 Biztalk adapter pack?

  Hello

  We already use a free version of SAP Business Suite (32-bit adapter) to suck SAP data.
  We are now upgrading all SSIS packages with the 64-bit Biztalk adapt pack 2010 and have few questions about it. It works successfully.
  Question 1:
  In my direct SAP, I installed the function module and my old 32-bit adapter works. As part of the migration to the new 64-bit adapter, I give myself with new functional module in SAP that I put in the SAP test area. To migrate all my packages, I have to start to move from one card to the other, and both must function in the SAP LIVE system module. If this is the case, will there be conflicts over the 2 functional modules working for 2 different cards (32 & 64 bit)? If my transition period is 4 weeks, these modules can still work?
  Question 2:
  If this works it cause any impact in the production SAP system at all? I don't want daily data extraction to cause an impact at all.
  Please advice. I'm unable to find any relevant article on this.
  Thank you
  Mani
  Original title: biztalk adapt pack 2010

  Hi Vincent,.

  I would have you post your query in the MSDN forums, because it is addressed to an audience of it professionals.

  Your request would be more out there.

  Check out the link-

  http://social.msdn.Microsoft.com/forums/en-us/sqlintegrationservices/threads/

  Get back to us if you have questions about Windows in the future. We will be happy to help you.

  Thank you.

• Problem to run Agilent GPIB with NI-VISA card: recurring at Agilent VISA 32 report of open conflict that all things set correctly...

  Hi developers OR,.

  I have a recurring problem to correct my installation using a labview and Agilent GPIB card.

  Of course, the well-known configuration tips are generally defined:

  -Agilent VISA a VISA secondary (by-side mode)

  -the passport for tulip is enabled in NOR-MAX

  -OR-488 support active in Agilent librabry suite 16.1

  I uninstalled and reinstalled any component twice, but still get the same error message when I want to talk to a Keithley 2400 EMS:

  -Firstly, the agilent GPIB interface is correctly recognized expert Agilent connection and NOR-MAX

  -Then the instrument of 2400 keitjley initially works correctly in Agilent connection Expert and NOR-MAX

  BUT: when I try to send a command to the device (whether through the wizard or VISA using the Labview instrument driver), the tool returns an error (error "Application incomplete" punch followed immediately by a second "Invalid while in the local" error code)

  At the same time, the Manager (32 open report VISA) conflict in expert Agilent connection says "NI-VISA has returned an error. "There is a conflict of interface between NI-VISA and VISA Agilent". He suggested that the conflict occurs when different interfaces receive the same number of interface in the two VISA.

  Therefore, aware of the conflict that can occurs in a side-by-side installation, I tried to change the ID of Interface CLCL's Board of Directors in the Agilent connection Expert (from gpib0 to gpib9) and restart, but it did not help.

  So can you help me solve this recurring problem?

  Is it necessary to also change the VISA interface ID, or address of the GPIB Board Agilent GPIB in connection Expert? Wouldn't be the same address (9 for example)?

  I really do not understand.

  Sorry for this new message on the configuration of this topics, but I found no useful advice in the forums.

  See you soon,.

  Yoyo87.

  Finally, I got my system running after several tests, although I couldn't use NI-VISA as first VISA (allowing the tulip passport) with agilent VISA (permit for programs OR-488) at the same time.

  I uninstalled it all components of NOR and the agilent and re - install in the correct order (OR first, followed by agilent): nothing has changed.

  I check for updates of agilent and NOR and use several different versions of VISA at the same time: nothing has changed and I still communication errors when you try to send the order through NI-VISA Interactive control or labview (although it worked well by expert agilent of connection).

  I don't really know why, but I solved my problem by installing Agilent VISA primary visa. In this way, even if I do not see the Council of Agilent in NOR-MAX, I can always send control of GPIB instruments by labview using their VISA address or aliases defined in connection expert Agilent...

  I am always interested to understand why I was not able to run the two VISAs on my system with agiulent only one card PCI GPIB... so if one of you sees a clear reason for this...

  Thanks in any case, even if I don't have a lot of response on this topic...

  Yoyo87

• VMPlayer between conflicting WWAN module on the HP Mini netbooks - how to climb as bug?

  On a HP Mini 5101 netbook, integrated WWAN module (Qualcomm - module high speed Mobile HP un2400) does not connect when the VMPlayer is installed.  The player has no need to run, only to be installed.  If the player is uninstalled, the WWAN module runs.  Bluetooth/WLAN modules are not affected.

  Not done that for geek factor, but to run a virtual machine of our CMDB application on netbook in case of loss of access to the data center and DR site.

  LiveChat HP helped but concluded because a third-party application conflict with the Qualcomm WWAN module, is the problem of third parties.  We stopped process/services but could not get around.

  I've seen a few similar reports on google with laptops HP and WWAN.

  The environment is Windows 7.  Latest drivers WWAN, VMWare Player.  The symptoms are HP Connection Manager is running, but if the on option comes with the message 'select supplier '.  Once you try to connect with HP Connection manager PC does not (except with power hard off).

  How I climb this VM as a bug between the reading software and WWAN module.

  Thank you

  There is a new Version of the HP Connection Manager (V.3.1.3.11), which solves the problems. The network card is also usable in a virtual machine with a NAT configuration...

• Generator functions agilent modulated the amplitude of the voltage so that the signal

  Hello

  I'm new on the Labview.

  I need to provide a series of tensions with increases step on my device and it repeats again and again.

  For example, (5V 0V to 10V 0V 0V 15V) * 5 times

  In the past, I turned down on the generator Panel of Agilent 33220 functions by myself.

  It's stupid, so I will try to use the Labview to do the same.

  I have download the Agilent 33220 Vi function generator has and write a loop for to do this. It can work.

  But I found a problem. Each change of amplitude voltage, generator Agilent 33220 A functions will cease to exit and then output the new value.

  Because this short period of no output voltage, the dynamic behavior of my device will be destroyed.

  How can I do?

  You made a classic mistake. You have placed the Initialize and close inside the loop. The Initialize will, by default, perform a reset feature, which disables the output. Initialize outside a loop, do your stuff inside and close the loop.

  Regarding your code: I strongly recommend looking at the model of ramp function. It seems you want to increase the parameters of voltage to zero between the two. This can be easily done by creating your rising tensions ramp and then creating another matrix of the same size zeros and interlacing then the two tables. This will give you a complete range of voltage values, without to need two loops and determine what step you are on, etc. etc. For example, the following code will give you 5, 0, 0, 10, 15, 0 sequence fairly cleanly:

  

  In addition, never perform a comparison of equality on the floats. If not, you owe me nickel one another in my retirement fund.

• The module page should include the date at which each add-on has been more recently updated to help diagnose problems.

  Sorry, this isn't a question, but a suggestion. If a conflict exists between the modules, it would be useful to know that it has been updated recently. I often keep track of myself, but it would be easier to have this information on the page Add on.

  "Last update" is available from the display of the modules for each module by clicking on the "More" link... "just below the name of the add-on. Scroll down on this new view of the page.

  An add-on that lists information about all Extensions or Plugins, including the date of update (last updated date shows in the options for the Extension List Dumper as "Date of installation")

  • https://addons.Mozilla.org/en-us/Firefox/addon/extension-list-Dumper/

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Satellite in a series - error: conflict of resources - PCI on the card mother BUS: 09

  What started it stops early on with the error:
  -Conflict PCI resources on the card mother BUS: 09, device: 01 function: 00
  -Conflict PCI resources on the card mother BUS: 09, device: 01 function: 02
  -Conflict PCI resources on the card mother BUS: 09, device: 01 function: 03

  I have the option to continue with F! that works.
  I use Windows 8 at the moment, but it seems not so stable. Above mentioned mistakes occurred that after awhile, I upgraded to W8.

  Do I need a new motherboard, or y at - it another option. What does this error mean in normal words.

  Hmm, it looks like a problem with the motherboard or part connected to the motherboard.
  The error indicates this device 01 because of controller 09 conflict
  Have you tested the RAM?

  Recommend doing this! You can use a tool like Memtest or similar.
  Maybe it isn't that a Ram problem and new modules could solve your problem.

• Satellite Pro M30 Bios error resource conflict - bios setting change or boot

  Hello.

  My beginning of portable satellite M30 with a bios error. The error that says "resource conflict, the bios setting change or start" If select 'start' the computer crashes before windows starts completely. I have remove the wi - fi and modem module and the same error message. I can't update the bios because the windows start. The bios version is 1.7. The laptop is the UK version. If select "Edit the bios", beginning of the bios but I can't find any resources management.

  Thank you

  (Sorry for my English, I'm from the Spain)

  Hello

  I think the bios error change setting means that you need to access the BIOS and should set the BIOS default settings.

  Please to do this, save the settings and try to start!

• Satellite P300 - conflict of resources on how to start

  Hiya All,

  I am eager to see if someone could help me eventually. My father brought this laptop about 2 years ago, but disappeared since then but my young brother, the computer guru said stuffed that we think! Anyway, these are mistakes that we get on the trunk to the top, I hope someone is able to help me if I can solve this for my mom.

  RESOURCE - ALLOCATION ERROR STATIC NŒUD # 05 CONFLICT
  RESOURCE - ALLOCATION ERROR STATIC NŒUD # 06 CONFLICT
  RESOURCE - ALLOCATION ERROR STATIC NŒUD # 07 CONFLICT
  RESOURCE - ALLOCATION ERROR STATIC NŒUD # 09 CONFLICT
  RESOURCE - ALLOCATION ERROR STATIC NŒUD # 0 CONFLICT B ERROR
  RESOURCE - ALLOCATION ERROR STATIC NODE 0E # ERROR CONFLICT
  RESOURCE - ALLOCATION ERROR STATIC NODE 0F # ERROR CONFLICT

  Press to resume, installation

  Can anyone help with this at all, I went into the CMOS & changed the year but nothing changed a few beeps to say hello to me, it is a problem here.

  Help!
  See you soon,.
  Shaz

  Hi, Fabien,

  I've never seen such a question...
  For me, this looks like a malfunction of the BIOS. What happens if you go into the BIOS (F2) and load default settings? After loading default settings, save the new settings and restart your computer.

  If it doesn t help I think that you need professional help of a mobile technician because the ROM module needs to be reflashed.

• Must install Labview App on cFP2200 with feature plug & play for measurement modules

  Hello

  I am trying to install a monitoring software on cFP2200 devices. This software uses anywhere from 1 to 8 modules of I-102. I want to be able to deploy my build to the fieldpoint without having to know in advance how many modules will be there.

  My plan to achieve this was to design my application to assume that all modules HAVE 102 were available to read to go, throw an error that I catch and delete if they weren't. It works perfectly in tests of interpreted code. I managed to disconnect the field point, 102 HAVE devices to different locations than before, and my software could find them and ignore the slots where were connected HAVE 102 s.

  A question is asked now when I try to deploy a compiled version of this app on the fieldpoint. When I do that, I get a "conflict resolution" popup that lists all of the I-102 s who are not connected at deployment time. I have to choose 'cancel the deployment' or 'Skip deployment' in these cases. So I am unable to find I-102 modules if I move them to one location other than when they were connected to install or put new ones in.

  We will put these modules at customer sites and we want the ability to develop so that it contains some 102 HAVE more or less as the customer systems expand and contract. Under the current situation, I have to re - install the software manually whenever they move a module that is not really an acceptable long term solution.

  Are there ideas about how to address the issue?

  Thank you

  Kelsey Golden

  I just realized that the "conflict resolution" window really means nothing. As long as I select 'Skip', I can always move the modules or new install! It makes me wonder what the conflict resolution is intended in the first place if he is not actually stop me using the modules later.

  For all those who want plug-and-play in the future, my solution essentially try to read all possible addresses and ignore those throwing errors basically seems to be the way to do this. Just ignore the stupid conflict resolution window. I of course hope that the fact that I can still install modules in locations where conflicts implicitly he wasn't their installation is not a defect that NEITHER patch later outside.

• IVI agilent Funcgen 33522 B

  Cannot get the IVI driver to work with Agilent 33522 B generator functions. (VISA funktions work well)

  I installed the driver of the IVI - C.  (http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=A1C02CABC2854F97E0440021287E6A...

  It adds a 'driver instruments Module' ag3352x. (IviDriver 1.1 IVI - C and IviFgen 5.0 IVI - C)

  Added a 'logic' and selected name the session "Driver" (ag3352x) and selected the material resource (GPIB0::11:INSTR)

  Tested with the "simulate with" set to the works of specific driver, but when I set it to not simulate I get "0xBFF0015 timeout expired" in LV and TestStand.

  33522B unit switches mode to distance and communication show 2 error: header not defined-113, query-420 UNTERMINATED.

  Is this a bug in the IVI driver? or have I missed something.

  PER DAY

  I got the job of communication. (after trying different drivers and settings)

  It seems to be the name of 'physical' and 'virtual' for 'channels' of MAX's name was the problem.

  The default physical name must be changed to something other than '1', although the Canadian standard requires that the name of the channel is '1 '.

  If it works if I have something like "Channel 1" the virtual name value and then use '1' in BT or Teststand.

  (In Teststand you must change the name of the channel pre-filled (in this case channel 1) to '1')

  PER DAY

• Returned by DAQmxGetDevCIMaxTimebase for a NI 9361 module incorrect frequency limit

  Hello
   
  I have a NI 9361 module in a 9178 cDAQ chassis. My workflow is as follows:
  (1) create a new task
  (2) add a the meter inlet channel to the task
  (3) the maximum basic rate of time meter using DAQmxGetDevCIMaxTimebase entry question.
  (4) set the sampling frequency clock using DAQmxSetSampClkRate at the speed required in step 3.
  (5) Perform other steps such as add a channel of analog input or external clock to the task.
   
  I get an error in step 4:
   
  Requested value is not supported for this property value. The value of the property may be invalid because it is in conflict with another property.
  Property: DAQmx_SampClk_Rate
  Required value: 100.0e6
  Maximum value: 40.0e6
  Minimum value: 22.250739e - 309
   
  Why step 3 returns 100.0e6 when I put only a maximum of 40.0e6? Must I call another method instead of DAQmxGetDevCIMaxTimebase? I have attached my code for your reference.
   
  Thank you
  Varun heraud
  The MathWorks

  There is a difference in how the counters work for the 9361 NOR in the cDAQ and counters in other devices (including the cDAQ chassis counters).  The 9361 OR use a chassis timing engine, so it does not require an external sample clock, and it transfers data to the bottom of basket on each sample clock.  Therefore, there is a limitation on how fast that can occur and the DAQmxGetSampClkMaxRate function allows users to query this value.   The counters on the USB-6211 USB 6351 require an external sample clock, and since they are one of the subsystems of the device, the maximum sampling rate is not dependent on engine, no data transfer time constraints so DAQmx does not support the property of max (for the tasks of meter) sample rate.  For these devices, you get an error if the counters have no new data between the sample clocks (because the sample clock is faster than on the counter source input signal).