Mini Bluetooth keyboard not re-pair after installation

Similar Questions

• Iconia W700: Bluetooth keyboard not detected in Windows 10 x 64

  I'm trying to update all computers at home on Windows 10 and it was pretty painless for most of the devices so far. However, I can not get my W700 Iconia tablet to recognize the Bluetooth keyboard.

  Is the keyboard with integrated lid, and I followed the procedure, as indicated on the Acer Web site, to hold the power button on the keypad for 5 seconds to put it in discovery mode and then adding a Bluetooth unit device. Of course, the menus have new sites, but are not hard to find.

  I have updated the driver for Bluetooth on the Tablet, but who has not remedied the problem. I looked around and couldn't find any mention of this problem here or elsewhere, probably since Windows 10 has just launched a few days ago.

  Okay, so I don't know if the driver was actually the question, but Acer documentation to set the Bluetooth keyboard pairing mode requires that you hold down the power button until the two LEDs on the departure of keyboard alternately as on a police car.

  If anyone is reading this and it still does not allow you to associate the keyboard, then here are the steps to get the right Bluetooth driver:

  1. Open Device Manager (right-click the windows down icon on the left)
  2. Expand the "Bluetooth" category in Device Manager
  3. Right click on the Bluetooth driver (should be first in the list, if there are several devices listed)
  4. Click on uninstall
  5. Restart the tablet. Bluetooth driver is reinstalled on reboot.
  6. Reopen Device Manager after the connection
  7. Right-click on the Bluetooth driver, then click on "update driver software... »
  8. Select the option for Windows find the driver software.
  9. An update must be downloaded and installed.
  10. Now, repeat the pairing steps detailed above, and you should see an option for the pair the keyboard appear in the Bluetooth settings.

  I am subscribed to this topic so if anyone has a problem, just answer and I'll try to help you sort.

• Satellite Click Mini L9W - keyboard not recognized B

  Hello

  I have a problem with my Tablet PC Satellite click Mini L9W - B. The keyboard is not recognized on this subject.

  I tried to clean the connector, restart the Tablet several times, tried to load with or whitout the keyboard, but nothing works!
  I do not think that the problem is with the battery, as I've seen on other topics as the tablet doesn't detect even the keyboard when I plug. The Tablet does not detect the keyboard battery.

  So, if you can give me advice or assistance to solve my problem, I would appreciate :-)

  He has no communication with the keyboard at all? (No battery detected, the touch pad and the keyboard does not?) There must be a link related question, I guess. If it was a driver related issue, then the battery would at least get detected)

  If you want to void your warranty, you can open the Tablet and keyboard dock and check that the Ribbon connectors or / and remove and replace the Ribbon connectors connectors in

• Satellite L300 did not initialize properly after installation of MS Word

  I would like to know why after Microsoft word 2007 on my laptop, after turning working once again, it would not load.
  I went to f8 and it came with starting pitcher repair it is as well as what I've done, then when he's looking for repair was finished.
  He said that he could not repair automatically. So he died.
  When I turned it back started with ok.
  Anyone know why this happens.

  Who knows why this happened
  Seems that something was wrong with the Windows operating system installed.
  Something like this always happens
  I think it was a bad luck that happened after the installation of MS word, I think it could also occur after installing any other software...

  However, the unit seems to start properly so it was just a matter of time

  Welcome them

• Computer cell G6, don't wake up not the mode after installation of windows 8

  OK here is the problem, computer works very well with Windows 7 (64 bit), but after the installation of Windows 8 (64-bit) system incounters errors.  To put the system to sleep, closing the cover or on its own, during the process of awakening Windows 8 says it has incountered a mistake and must restart and it does on its own.  He tries to wake up but freezes and restarts.  There is no error code given just that windows has incounterd an error and must restart with a face to frown.  I contacted microsoft support and after many hours on the phone, it seems that the bios does not support this feature with Windows 8.  BIOS have been updated to the newest bios listed for the upgrade of Windows 8 on the HP website.  All the driver have also been updated with those listed for Windows 8 upgrade to the HP Web site.

  HP Pavilian G6-1b22ca

  Windows 7 Edition Family Premium in Windows 8 pro

  BIOS F.48

  Does anyone know of a work around or a solution to this problem?

  You are the very welcome.

  I am pleased to read that you got your laptop in an average point round.

  As long as it works well, then it's essential.

  Enjoy!

• Bluetooth is not automatically pair with car audio system

  I'm having a problem with the connection automatically to my car handsfree system, I go to bluetooth settings each time so that it can connect. Manually the connection works well but is very tedious to long-term and not how bluetooth should work to my knowledge.

  Anyone know if this a bug or a feature I'm missing?

  The car is a Subaru Impreza in 2013.

  So I understand that eventually... Basically, there are two ways to remove the previous devices (on the side of the car), we must simply select the device, then delete and the other is to fully wipe ranging from installation-> initialize. Apparently the system just needs a fresh start...

  Thank you!

• Problem with installing Windows on a hard drive, HARD drive does not get detected after installation

  Original title: help with hard drive of the computer.

  Flow of the problem:

  My aunt tried to install windows 7 on the previous copy of windows 8. Needless to say that it doesn't work and it has messed up the hard drive. So, I bought a vacuum. I formatted the hard drive using my other windows computer to have 2 partitions: a boot partition and system partition, and then used the program WinToUSB to install windows on the hard disk. The reason I did it is, because no matter how many times I changed the BIOS in my laptop of aunts, it wouldn't boot from the DVD player to load the windows software. After a few hours, I found WinToUSB. Once windows has been installed, I plugged it into the laptop. For a few hours, I didn't know what to do, because the computer does not recognize the hard drive (he said: "Not detected"). I decided to start from legacy, and then the screen deals

  «intell...» »

  and a bunch of dates, etc all the stuff on the screen to load legacy if you know what I mean.

  He said "not plugged in the media. Check the power cord.

  Then quickly changed screen before I can read almost anything and it goes to the normal windows screen black (with 4 colors). I said to myself, how can he be loading if the hard drive is not detected... Once it is loaded, he brought me to the blue screen (blue screen of death, if you want) I turned the computer on again, always noticing the hard drive was not detected. I ran all the recovery/repair options I could and turned off the laptop. I came back a few hours ago and I loaded the computer again and went into the BIOS.  He said that the hard drive has been detected and said the news about this, as usual. However, at the start of the legacy of windows loading screen, it said still not detected.  I then started to windows to see since it is now detected if that fixes the blue screen. Yet, there is no. I tried to go to the normal windows and screen remains blue. any ideas?

  Hello Chris,

  Thank you for visiting Microsoft Community.

  According to the description, it seems that Windows was not properly installed on the hard drive. I'm not sure how to work the software from third-party manufacturers WinToUSB and reliable installation process is. Microsoft does not recommend using any third party tool to install Windows on your computer, the use of these third-party tools can cause serious damage to your computer.

  I would say to format the hard drive once more and try to install Windows through normal Windows installation process.

  Refer to the section "using the installation option custom if no operating system is installed" in the thread below.

  Installing and reinstalling Windows

  http://Windows.Microsoft.com/en-us/Windows/installing-reinstalling-Windows#1TC=Windows-7

  If you are not able to install Windows on the hard drive at all, I suggest you to contact the hard drive manufacturer to obtain a diagnosis of material performed on the hard drive.

  Do not hesitate to write back for any further assistance with Windows, we will be happy to help you.

• TMSAgentService could not be started after installation done

  Hi all

  Just finished installation of TMS on a Windows 2003 VM, I try to activate the TMS of Cisco Agent by administrative tools > Configuration > settings General, but after that, enable the Agent Diagnostics of the TMS showed "Unable to connect to a remote server", so I checked the TMSAgentService in Windows services, I found it is not started and could not be started in even I manually start the service.

  It is not no matter what other configurations on MSDS and yet, he has completed the initial installation.

  Hi, 25 key movi option is the one used for the commissioning of license. It is preferable to install the latest version of the TMS software on Windows 2008 R2 server operating system. And as reported by Magnus, you can use the extension of provisioning place TMSagent [OpenDS].

• For blackBerry Smartphones BB Mini bluetooth keyboard is dead

  Hello. I bought a BB Mini keyboard 3 months and I left it for a month without charge (no not even use it), today when I learned that the battery has failed, I tried to load it using the blackberry charger and the USB port, nothing does it happened just die completely... What should I do... I could not find how to get a replacement... I'm at Waterloo...

  Hey zodiacsoulmate,

  Welcome to BlackBerry Support Community Forums.

  Warranty and replacement options are managed by your point of sale.

  Thank you.

• iMac will not be stopped after installation of El Capitan

  My computer shuts down after upgrading to El Capitan. I did some research and discovered that I have to remove avid CoreAudio.plugin of my plugin folder, but when I opened this file is not there. Is there another solution to this problem?

  Try resetting the SMC reset management system (SCM) controller on your Mac - Apple Support

  If you need to force close to the bottom of your iMac do it now the power button for about 10 seconds.

• Bluetooth is not discover something after an update from HP.

  Hi, I have a HP Pavilion dv2500 laptop and I was using a Microsoft Bluetooth Notebook Mouse 5000 with her for weeks last 3 or so without any problem. This morning and did an update of HP and later, the mouse has been removed from my bluetooth devices and when I try to add a new wireless device, bluetooth is also not only to discover the mouse, it isn't something else, like my cell phone, check out either. The mouse can be discovered on another computer, with that I tried. What should I do to get my bluetooth up and run again?

  Roll back the driver/update

• Acrobat 9 Pro (Master CS4 Suite) works not at all after installation

  I had to reinstall all my software Adobe CS4 after I restore my iMac any HD issues I had with other things after upgrade to El Capitan (initially before restoring HD no problems with Adobe Acrobat Pro).

  Now with the own drive, I reinstalled my software including Acrobat Pro, and everything seems ok except my Acrobat Pro. I uninstalled and reinstalled just that as uninstalled and reinstalled everything and it still doesn't work.

  When I first open it upwards, he said: there are some missing items that need repair. I've attached a screenshot of the message. So I say keep and all I get is anything other than 'Acrobat' in the main menu choices but nothing underneath, no help no menu nothing. And when I try to stop it it won't let me, I have to force it to quit.

  Can anyone please help me why it does not work. I'm in my mind filled with questions of El Capitan and now having this problem just because I reinstalled it on my own HD again.

  

  Adobe does offer not supported for CS4, as we know, even if we paid for the software it is basically our bad luck now if we have problems. Hoping someone can help me on this problem through the forum, including Adobe support please

  Thank you

  Hi MightyMaya,

  It may or may not work, difficult to guess as its on an unsupported platform.

  We will recommend so you can use the application in a supported environment.

  Kind regards

  Nicos

• My series of MC CS5.5 not accepted even after installation with FB 4.6

  Hi all

  My CS5.5 MC serial number is not accepted by FB 4.6 even after the start it here as suggested test mode: http://kb2.Adobe.com/CPS/924/cpsid_92402.html

  Can someone help me?

  I am happy to know that.

  Can you please mark this message as answered?

• iPhone stuck in DFU and PC mode does not recognize device after installation of iOS 9.3.2 failure

  So today, I decided to upgrade my firmware to the latest 9.3.2 via iTunes 9.2. Everything was fine. Both PC and iTunes recognized my phone and the upgrade process was fine, until suddenly I'm met by a mistake to say that the update failed, which was then followed by an immediate blue screen of death, with the error pointing to 'asmtxhci.sys', the XHCI Host Controller Driver of ASMedia Technology Inc.. My phone is then stuck in DFU, and my PC mode and iTunes refuses to recognize my device. I checked Device Manager and noticed this strange spectacle:
  

  It lists somehow my camera as two separate. I tried to install the drivers manually from "C:\Program Files\Common Apple Mobile Device Support\Drivers". I managed to install the drivers for the DFU mode (but he didn't) I met for the first device, but when I tried for the second device by mistake 10 "device could not start" or something like that.

  I don't know how to proceed from here. I tried so many stuff, read so many other messages, but I have not seen anyone with my problems, that's why I went here. I'm half - panic right now...

  This sounds like a rather nasty problem - maybe a conflict with ASMedia USB and Apple Mobile Device Driver.  If you do a Google search on "asmtxhci.sys" you may reports of this cause the blue screen of death (BSOD).  There are a few patches recommended, but I'm not going to suggest anything as I'm not familiar with any of them and they could cause various other problems (even worse).  Good luck!!!

• Bluetooth does not automatically start after start

  Hello

  I have a SONY VAIO with built in Toshiba Bluetooth. My bluetooth in the taskbar icon no longer appears when Windows starts. That's happened? I always start the Bluetooth manually in Control Panel... Help, please. How can I activate Bluetooth on starting again? Thank you very much.

  I don't know how it works on Sony laptop computers, but on my Toshiba BT application automatically starts when the BT module is enabled. In any case, try to define as suggested by the creation of shortcuts.