Bluetooth is not discover something after an update from HP.

Similar Questions

• sound card does not work correctly after Windows update

  My sound card has been disabled when I install an automatic update for windows. There was an extra audio driver in Device Manager 'bluetooth AV audio' and audio peripheral anoither like this. After installation there is no sound coming out if my sound card was on the list of Device Manager. I followed several steps through windows help and support to solve the problem since seeing him on my laptop for mute also did not work. After you resolve the problem with the use of MICROSOFT FIX IT, it was fixed but this isn't the same quality that I get. Its volume is less eventhough volume: 100. The sound card that was originally installed on my laptop is "Conexant High definition SmartAudio HD2. Is there something more I need to do in order for me to get the same quality of sounds I have before installation?

  Moreover, the light of my keyboard for caps lock shift and scrolling also failed after installation. I reformat my laptop after the incident, so I can get a good in the new system, but it does not solve the problem.

  I also need to update my sound card for my HP laptop? Please help me.

  Thank you!

  Hello

  1. what windows update that you install?

  I would ask you to try using a different set of drivers to verify. For more information, see the articles below.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Conexant support:
  http://www.Conexant.com/support/

  I hope this helps.

• Service SQL Server 2014 will not start start after the update sp1 (KB3058865, KB3075950, KB3094221)

  Hi, my SQL Server 2014 works very well in my server with WIndows 2012 until I installed the new day & service pack that was required for server hardening.

  I successfully installed SP1 KB 3058865 first, then discovered that the services do not start. After so much research to fix, I came with the 2 cu updates KB3075950, KB3094221 in knowing that it could solve my problem but unfortunately is not.

  I also tried to change the service account that many suggest, but his does not work.

  I tried to replace the master file & maslog but also failed.

  I tried to run etc and unique usermode and restore master db... also failed.

  Here is the log file:

  16/02/01 15:21:21.83 Server Microsoft SQL Server 2014 (SP1 - CU3) (KB3094221) - 12.0.4427.24 (X 64)
  October 10, 2015 17:18:26
  Copyright (c) Microsoft Corporation
  Standard Edition (64-bit) on Windows NT 6.2 (build 9200 :) (hypervisor)

  2016-02-01 15:21:21.84 setting the server UTC: 08:00
  2016-02-01 15:21:21.84 Server (c) Microsoft Corporation.
  2016-02-01 15:21:21.84 server all rights reserved.
  2016-02-01 15:21:21.84 server process ID is 5128.
  2016-02-01 15:21:21.86 Server system manufacturer: "Microsoft Corporation", model of system: 'Virtual Machine '.
  2016-02-01 15:21:21.86 the server's authentication mode is MIXED.
  2016-02-01 15:21:21.86 Server record SQL Server messages in file ' C:\Program Files\Microsoft SQL Server\MSSQL12. MSSQLSERVER\MSSQL\Log\ERRORLOG'.
  2016-02-01 15:21:21.86 Server service account is "NT Service\MSSQLSERVER". This is an informational message; no user action is required.
  2016-02-01 15:21:21.86 registry server startup parameters:
  -d C:\Program Files\Microsoft SQL Server\MSSQL12. MSSQLSERVER\MSSQL\DATA\master.mdf
  e C:\Program Files\Microsoft SQL Server\MSSQL12. MSSQLSERVER\MSSQL\Log\ERRORLOG
  l C:\Program Files\Microsoft SQL Server\MSSQL12. MSSQLSERVER\MSSQL\DATA\mastlog.ldf
  2016-02-01 15:21:21.86 Server startup command line parameters:
  s 'MSSQLSERVER '.
  2016-02-01 15:21:22.27 Server SQL Server has detected 1 struggling with 1 cores per socket and 1 logical processors per socket, 1 total logical processors; using 1 logical processors based on SQL Server licenses. This is an informational message; no user action is required.
  2016-02-01 15:21:22.27 Server SQL Server starts at the normal base priority (= 7). It is an informational message only. No user action is required.
  2016-02-01 15:21:22.28 Server has detected 7999 MB of RAM. This is an informational message; no user action is required.
  2016-02-01 15:21:22.28 Server using conventional memory in the memory manager.
  2016-02-01 15:21:22.33 default server collation: SQL_Latin1_General_CP1_CI_AS (us_english 1033)
  2016-02-01 15:21:22.37 Server this instance of SQL Server is a latest report by using a process ID of 1600 at 01/02/2016 15:13:12 (local) 01/02/2016 07:13:12 (UTC). This is an informational message only; no user action is required.
  2016-02-01 15:21:22.38 the maximum number of connections administrator dedicated to this server instance is '1 '.
  2016-02-01 15:21:22.38 configuration of server node: node 0: CPU mask: 0 x 0000000000000001:0 Active CPU mask: 0 x 0000000000000001:0. This message provides a description of the NUMA configuration for this computer. It is an informational message only. No user action is required.
  2016-02-01 15:21:22.40 allocation of dynamic locking using the server.  Initial allocation of blocks of lock of 2500 and 5000 per node lock owner.  It is an informational message only.  No user action is required.
  2016-02-01 15:21:22.43 spid8s start database 'master '.
  2016-02-01 15:21:22.49 Server CLR version loaded v4.0.30319.
  2016-02-01 15:21:22.51 spid8s d - 8 operations in the database 'master' (1:0). It is an informational message only. No user action is required.
  2016-02-01 15:21:22.61 Server common language features (CLR) runtime initialized using CLR version C:\Windows\Microsoft.NET\Framework64\v4.0.30319\ v4.0.30319.
  2016-02-01 15:21:22.62 spid8s 0 operations cancelled in database 'master' (1:0). It is an informational message only. No user action is required.
  2016-02-01 15:21:22.62 spid8s Recovery is writing a checkpoint in database 'master ' (1). It is an informational message only. No user action is required.
  2016-02-01 15:21:22.79 spid8s SQL Server Audit begins audits. This is an informational message. No user action is required.
  2016-02-01 15:21:22.80 spid8s SQL Server Audit has begun audits. This is an informational message. No user action is required.
  2016-02-01 15:21:22.88 spid8s Trace SQL ID 1 was launched by the "sa" login
  2016-02-01 15:21:23.28 spid8s server name is "UATCASADB". It is an informational message only. No user action is required.
  2016-02-01 15:21:23.28 spid13s A self-generated certificate was loaded successfully for encryption.
  2016-02-01 15:21:23.33 spid13s Server listens on ['none' 1433].
  2016-02-01 15:21:23.40 spid13s Server listens on ['none' 1433].
  local connections provider 2016-02-01 15:21:23.44 spid13s server is ready to accept connection on [\\.\pipe\SQLLocal\MSSQLSERVER].
  local connections provider 2016-02-01 15:21:23.44 spid13s server is ready to accept connection on [\\.\pipe\sql\query].
  2016-02-01 15:21:23.48 Server Server listens on [: 1 1434].
  2016-02-01 15:21:23.49 Server Server listening on [127.0.0.1 1434 ].
  2016-02-01 15:21:23.49 connection admin support dedicated server was created for locally listening on port 1434.
  2016-02-01 15:21:23.49 Server SQL Server attempts to save an of Service Principal name (SPN, service principal name) for the SQL Server service. Kerberos authentication is not possible, until a name for the SQL Server service is SPN. This is an informational message. No user action is required.
  2016-02-01 15:21:23.60 spid14s A new instance of the full-text filter daemon host process has been started successfully.
  2016-02-01 15:21:23.71 Server SQL Server Network Interface library successfully registered the Service Principal Name (SPN) [MSSQLSvc/UATCASADB.onenetworkbank.com.ph] for the SQL Server service.
  2016-02-01 15:21:23.72 Server SQL Server Network Interface library successfully registered the Service Principal Name (SPN) [MSSQLSvc/UATCASADB.onenetworkbank.com.ph:1433] for the SQL Server service.
  2016-02-01 15:21:23.97 spid17s start database 'msdb '.
  2016-02-01 15:21:23.98 spid18s database startup "ReportServer".
  2016-02-01 15:21:23.98 spid19s database startup 'ReportServerTempDB '.
  2016-02-01 15:21:24.03 spid9s start database 'mssqlsystemresource '.
  2016-02-01 15:21:24.08 spid9s the base resource database build version is 12.00.4427. It is an informational message only. No user action is required.
  Error logon 2016-02-01 15:21:24.11: 18401, severity: 14, State: 1.
  2016-02-01 15:21:24.11 of logon login failed for user "NT SERVICE\ReportServer". Reason: The server is in script upgrade mode. Only one administrator can connect at this time. [CLIENT: ]
  2016-02-01 15:21:24.18 spid19s 1 transactions rolled forward in the 'ReportServerTempDB' (6:0) database. It is an informational message only. No user action is required.
  2016-02-01 15:21:24.28 spid19s 0 transactions cancelled in the database 'ReportServerTempDB' (6:0). It is an informational message only. No user action is required.
  2016-02-01 15:21:24.44 spid17s 133 transactions rolled forward in the database 'msdb' (4:0). It is an informational message only. No user action is required.
  2016-02-01 15:21:24.73 spid17s 0 transactions cancelled in the database 'msdb' (4:0). It is an informational message only. No user action is required.
  2016-02-01 15:21:24.74 spid17s Recovery is writing a checkpoint in database 'msdb' (4). It is an informational message only. No user action is required.
  2016-02-01 15:21:24.79 spid9s start database 'model '.
  2016-02-01 15:21:25.01 spid9s clearing tempdb database.
  2016-02-01 15:21:25.94 spid9s start database 'tempdb '.
  2016-02-01 15:21:26.12 spid20s The Service Broker endpoint is in a disabled or stopped state.
  2016-02-01 15:21:26.12 spid20s The Database Mirroring endpoint is disabled or stopped state.
  Manager of Service Broker 2016-02-01 15:21:26.15 spid20s began.
  2016-02-01 15:21:27.32 spid8s database 'master' is upgrading script 'msdb110_upgrade.sql' of level 201328592 level 201331019.
  2016-02-01 15:21:27.32 spid8s-
  2016-02-01 15:21:27.32 spid8s start PRE_MSDB execution. SQL
  2016-02-01 15:21:27.32 spid8s-
  2016-02-01 15:21:28.36 spid8s configuration database COMPATIBILITY_LEVEL option for 100 for database 'msdb '.
  2016-02-01 15:21:28.56 spid8s-
  2016-02-01 15:21:28.56 spid8s start PRE_SQLAGENT100 execution. SQL
  2016-02-01 15:21:28.56 spid8s-
  2016-02-01 15:21:28.60 spid8s configuration database option COMPATIBILITY_LEVEL of 120 for the database 'msdb '.
  2016-02-01 15:21:28.77 spid8s Configuration option 'allow updates' goes from 1 to 1. Run the RECONFIGURE statement to install.
  2016-02-01 15:21:28.77 spid8s Configuration option 'allow updates' goes from 1 to 1. Run the RECONFIGURE statement to install.
  Error logon 2016-02-01 15:21:29.18: 18401, severity: 14, State: 1.
  2016-02-01 15:21:29.18 of logon login failed for user "NT SERVICE\ReportServer". Reason: The server is in script upgrade mode. Only one administrator can connect at this time. [CLIENT: ]
  2016-02-01 15:21:31.84 spid8s attempting to load library 'xpstar.dll' in memory. It is an informational message only. No user action is required.
  "2016-02-01 by using spid8s 15:21:31.86"xpstar.dll' version ' 2014.120.4100 ' to run the extended stored procedure 'xp_instance_regread '. This is an informational message only; no user action is required.
  2016-02-01 15:21:31.89 spid8s DBCC TRACEOFF 1717, process server ID (SPID) 8. This is an informational message only; no user action is required.
  2016-02-01 15:21:31.89 spid8s DBCC execution completed. If DBCC printed in error messages, contact your system administrator.
  2016-02-01 15:21:31.90 spid8s
  2016-02-01 15:21:31.90 spid8s create table temp_sysjobschedules
  2016-02-01 15:21:32.20 spid8s
  2016-02-01 15:21:32.20 spid8s Alter table sysdownloadlist...
  2016-02-01 15:21:32.22 spid8s
  2016-02-01 15:21:32.22 spid8s Alter table sysjobhistory...
  2016-02-01 15:21:32.24 spid8s
  2016-02-01 15:21:32.24 spid8s Alter table systargetservers...
  2016-02-01 15:21:32.25 spid8s
  2016-02-01 15:21:32.25 spid8s Alter table sysjobsteps...
  2016-02-01 15:21:32.40 spid8s Configuration option 'allow updates' goes from 1 to 0. Run the RECONFIGURE statement to install.
  2016-02-01 15:21:32.40 spid8s Configuration option 'allow updates' goes from 1 to 0. Run the RECONFIGURE statement to install.
  2016-02-01 15:21:32.42 spid8s
  2016-02-01 15:21:32.42 spid8s-
  2016-02-01 15:21:32.42 spid8s PRE_SQLAGENT100 execution. Full SQL
  2016-02-01 15:21:32.42 spid8s-
  2016-02-01 15:21:32.46 spid8s DMF pre-shaping within walking distance...
  2016-02-01 15:21:32.83 spid8s DC pre-shaping within walking distance...
  2016-02-01 15:21:32.83 spid8s check if Data collector config table exists...
  2016-02-01 15:21:32.84 spid8s State of collector of data before the update: 0
  2016-02-01 15:21:32.84 spid8s pre_dc100::Check if syscollector_collection_sets_internal table exists...
  2016-02-01 15:21:32.84 spid8s pre_dc100::Capturing Collection to define the status of temporary table...
  2016-02-01 15:21:33.05 spid8s Deleting cached generated automatically collect T - SQL packages to msdb data...
  2016-02-01 15:21:33.05 spid8s end of the DC pre-staged to level as follows.
  2016-02-01 15:21:33.05 spid8s DAC pre-shaping within walking distance...
  2016-02-01 15:21:33.06 spid8s from CAD pre-shaping within walking distance...
  2016-02-01 15:21:33.06 spid8s end of the CAD pre-staged to level as follows.
  2016-02-01 15:21:33.06 spid8s-
  2016-02-01 15:21:33.06 spid8s start execution of MSDB. SQL
  2016-02-01 15:21:33.06 spid8s-
  2016-02-01 15:21:33.19 spid8s Configuration option 'allow updates' from 0 to 1. Run the RECONFIGURE statement to install.
  2016-02-01 15:21:33.19 spid8s Configuration option 'allow updates' from 0 to 1. Run the RECONFIGURE statement to install.
  2016-02-01 15:21:33.37 spid8s check the size of the MSDB.
  2016-02-01 15:21:33.63 spid8s error: 8966, severity: 16, State: 2.
  2016-02-01 15:21:33.63 spid8s can not read and lock the page (1:56616) with lock type SH. page no ID invalid. has failed.
  2016-02-01 15:21:33.63 spid8s error: 8946, severity: 16, State: 12.
  2016-02-01 15:21:33.63 spid8s Table error: Allocation page (1:56616) has invalid header values to the PFS_PAGE page. The type is 0. Check the type, unit ID of ID and the ID of the page on the page.
  2016-02-01 15:21:33.63 spid8s error: 912, severity: 21, State: 2.
  2016-02-01 15:21:33.63 spid8s Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' has detected 3601, an error state 5, severity 25. It is a serious condition that could interfere with the normal operation and the database is taken offline. If the error occurred during the upgrade of the 'master' database, it will prevent the entirety of a SQL Server instance to start. Review the previous entries in the error log, take appropriate corrective action and restart the database so that the script upgrade steps run until the end.
  2016-02-01 15:21:33.64 spid8s error: 3417, severity: 21, State: 3.
  2016-02-01 15:21:33.64 spid8s cannot recover the master database. SQL Server cannot run. Master of restoring a full backup, repair or rebuild. For more information on how to rebuild the master database, see the SQL Server online documentation.
  2016-02-01 15:21:33.64 spid8s stop SQL Server launched
  2016-02-01 15:21:33.64 spid8s trace SQL stopped due to server shutdown. Trace ID = "1". This is an informational message only; no user action is required.
  2016-02-01 15:21:34.70 spid8s error: 25725, severity: 16, State: 1.
  2016-02-01 15:21:34.70 spid8s an error occurred trying to empty sessions extended all running events.  Some events may be lost.
  2016-02-01 15:21:34.71 spid13s the SQL Server Network Interface library could not deregister the Service Principal Name (SPN) [MSSQLSvc/servername.urldomain] for the SQL Server service. Error: 0x2af9, State: 61. Administrator should deregister this SPN manually to avoid client authentication errors.
  2016-02-01 15:21:34.71 spid13s the SQL Server Network Interface library could not deregister the Service Principal Name (SPN) [MSSQLSvc / servername.urldomain:1433] for the SQL Server service. Error: 0x2af9, State: 61. Administrator should deregister this SPN manually to avoid client authentication errors.

  -----------------------------------------------------------------------------------------------

  I would be grateful for all the help I can get. Thank you.

  Hello

  Your question is beyond the scope of this community.

  Please repost your question in the SQL Server TechNet Forums.

  https://social.technet.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

  TechNet Server forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows does not start normally after Windows Update

  My computer does not seem to start more. Whenever it starts, it makes to the 'Starting Windows' screen, and then my screen goes black. My primary monitor does not receive a response, but my second monitor stays on until the computer restarts again. This happened last night after that my computer shuts down for the first time in a few weeks to install windows updates from July. I had updated windows to try to fix something with iTunes, which might have something to do with my problem. My computer was not showing any other kind of problem before that.

  Here are some other details:

  * I use Windows 7 Home Premium (Microsoft Windows Version 6.1.7601)

  * Windows does not load with normal settings but will load in safe mode.

  * System Restore never works in the system recovery (a non specifiederror occurred during system restore.) ((0x800700b7))  and sometimes says it works when I do it in safemode, but solves nothing. Yes, I tried using different restore points.

  * I think that my roots of the problem in the fact that I tried to restore my phone, but the computer could not install the drivers correctly.

  * Startup Repair does not detect it.

  Attempt to sfc/scannow in command prompt returns two different answers: "there is a system repair pending whice requires the restart ends.» Restart Windows and run sfc. "during the attempt to system recovery and" Windows Resource Protection found corrupt files and managed to fix their. " Details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log. For example C:\Windows\Logs\CBS\CBS.log"in Safe Mode with command prompt.

  I apologize if my description is a bit vague, but I need some urgent help with my computer. I tried all the solutions I've come across, but the same problem persists.

  Hello

  Sorry for the delay in response.

  Your problem has been resolved. Let us know if there is not, and we will be happy to help.

• DVD does not recognize the drive after installing updates from micorsoft

  After microsoft updates have been installed on our system the DVD - RW drive does not recognize DVD or CD the drive tries to read the disc and then the door opens and DVD/CD is ejected and then it asks to insert the disc.

  Hello

  Please follow the methods.

  Method 1:

  Run the Microsoft fixit for the link.

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Method 2:

  Follow the steps in the link.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/314060

• Dell Inspiron 1750, Windows 7: HL-DT-ST DVD +-RW GT10N not working after critical updates from MS

  I'm having a problem with my Player DVD - HL - DT - ST DVD +-RW GT10N.  I have a Dell Inspiron 1750, Windows 7.

  It was working fine, then after 3 critical updates from MS, it stopped reading/writing on the DVD player.  The only way I can access the DVD (read or write) is to restart.  A subsequent loading of different or even the same DVD finished with the issue of not being able to recognize the DVD.

  When I click on the properties of the DVD drive in Device Manager, it clocks.  However, after a reboot, the properties has worked well and said that the driver does not work properly.

  I got to the period before 1st update was installed and the DVD player worked as before.  However, Ms. downloaded the same (I assume) updated critical shortly after.  Low and behold, the DVD player does not work yet.

  The MS CD/DVD patch could not fix.

  I also tried UpperFilters/LowerFilters regedit deletions, but it is impossible to find these entries (http://support.microsoft.com/kb/982116 > HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}).  Thank you Osprey4 for your help continues.

  I hope someone can help me.

  Thank you

  Duane.

  Open Device Manager, right-click on the component, and then select uninstall.

• computer does not work properly after the update, because the screen is black.

  Advice please! :-(

  After an update there about 2 months, my computer has never worked properly after that I turned it back. My windows start page is longer there. My screen is black. The words are only in white and fluorescent yellow...

  The only way I can go online to find Norton (is always at the bottom of the black screen) and go to help. I can get a search bar like that. Almost as if this black screen hides everything below.  Computer is 13 months old.

  My internet provider says it isn't them. Gateway said it's not my computer so idk what happened after this update.

  Any advice would be so appreciated.

  Thank you.

  Hi Patty,.

  Welcome to the Microsoft community. I would be grateful if you can answer these questions.

  1. You have installed the latest drivers for Windows 8?
  2. What is the model number for Gateway computer?

  If you get a black screen after upgrade to Windows 8, it might be due to an outdated or incompatible graphics card driver. Update to the latest version of the display driver should fix this.

  Try to remove all external devices connected to the computer and then try to start the computer and check if it works. Follow these methods and check if that helps:

  Method 1: To resolve this problem, update the Gateway website. video card driver

  Step 1: Check out these Microsoft items for additional reference:

  Download and install the drivers

  http://Windows.Microsoft.com/en-in/Windows-8/all-drivers

  Step 2: If you are not able to find drivers for Windows 8 to HP support. Try to install the graphics drivers in compatibility mode and check:

  Download your applications and devices in Windows 8.1

  http://Windows.Microsoft.com/en-in/Windows-8/get-apps-devices-working

  If the problem persists, proceed to the next method.

  Method 2: I suggest to follow the suggestions provided in this Microsoft KB article and check if this can help:

  Windows 8 starts with a blank screen after a standard or hibernation

  http://support.Microsoft.com/kb/2756559/en-us

  See also the suggestion provided by Scott (owner of Forum) from this thread and check if this may help.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-performance/black-screen-when-logging-into-Windows-80-or/93bb4530-C31C-4a2d-91e6-7ec2fc420379

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• Equium A200-1VO does not run stable after BIOS update

  Hello

  I have a PSAF5E-002005KS A200-1V0. I updated my bios to help what he '20080212105826.zip' file and it doesn't seem to be as stable as it was before.
  It get error messages different copy, msdos errors etc.

  Can I return the bios to the original one and where can I find this please?

  Brian

  Unfortunately, the first version of the BIOS can be installed by a technician of the ASP.

  But I wonder about the error messages that appear after the update of the BIOS.
  Have you tried to reinstall the OS from the recovery CD? You must test the laptop with the factory settings!

  By the way; access the BIOS and set the defaults. And don t forget to save changes ;)

• No sound after an update from Toshiba

  I followed the instructions of what looked like the official update from Toshiba to uninstall something I don't remember exactly what, but I was directed to the Panel, sysytems and something to do with video, etc, and now I have no sound. System says no audion output device is installed.

  I must say from my experience, this time with a Toshiba Satellite is less satisfactory, always goes into hibernation and is difficult to restart, even after updating the BIOS suggested!

  Hello Wan

  And what model of laptop you have exactly?

  I'm sorry, but how understanding your problem anyway, he can't remember what you did. Who knows what you do with your laptop. All other problems can be caused by your experiences and to do something to change the configuration of the operating system.

  In this case I recommend a radical, but for you, the best solution: back up all your data and install the OS by using recovery media delivered. I'm sure with the factory settings everything works well again.

• Cannot restart the computer after downloading updates from Microsoft

  I downloaded updates from microsofts and the next step was to who I checked ok restart.
  The computer turns off and then tried to start, but stops and the error of reading a disk error has occurred.
  Press Ctrl-Alt-Del to restart. It does not work. Cannot enter safe mode or use my cd XP pro disk. Need some help here.
  Is it possible to start this computer from my laptop? My laptop using vista altimate. I can be reached at my e-mail address * address email is removed from the privacy *.

  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.windowsupdate&cat=en_us_d99bb655-a5d5-4C07-bdb0-90caf9f30c42&lang=en&CR=us

  Microsoft.public.windowsupdate discussions

  They will help you in the above discussion group.

  XP discussion groups:

  http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.WindowsXP.General

  Link above is to the XP newsgroups.

  There is a list of groups of discussion XP to the bottom of the left column.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Nighthawk D7000 does not recognize DSL after firmware update

  After updating firmware for V1.0.0.38 my D7000 would not recognize my AT & T DSL, no dsl or internet light connection.

  A round and round with netgear TS and told me that the firmware would not cause. I paid for an extended service get this problem fixed. After AT & T came home and verified that all signal completely to modem was good, TS decided that my modem was bad and I paid to get a new delivery.

  Connected a new place and still no DSL recognition. This unit was V1.0.0.32.

  I downloaded the V1.0.0.18 firmware and the problem disappeared. I'm back up and running.

  I tried the next most recent firmware and the unit would not recognize my DSL once again.

  So, I'm under V1.0.0.18 and it seems to work very well.

  What is the problem with that?

  Don't know if you have this problem solved yet but that's. That's what I had to do.

  You will need to download the * *.18 firmware. something of higher que.18 does not work, tested!

  Connect the modem and connection with the connection on the bottom of the D7000.

  When you open a session go to the menu update firmware. link to your downloaded software. I will ask if you want to because of the older firmware, say Yes. Be patient and let it work.

  Now, you will get the LEDs ADSL and internet.

  You must have your ATT internet connection and the password to complete the installation.

  Mine works fine, for DSL sucky service.

  Good luck!!

• Mini Bluetooth keyboard not re-pair after installation

  I have a mini keyboard THAT compass + mouse who pairs with Windows 7 thanks to a code generated automatically by Windows. However, after that the unit is unplugged and is re - connect, Windows not self-generating code and ask you a code of the manufacturer instead. There is no manufacturer provided the code. So basically I have to remove and reinstall the device each time to make it work.

  I tried to reinstall and update the drivers on the device, but it is not available. Dongle Bluetooth has been upgraded to the latest version of the driver.

  Help!

  I found the problem. The problem is with the misleading guest of Windows 7 Professional. After you have installed the driver for the bluetooth keyboard and attempt to reconnect the said device after disconnecting, Windows 7 stipulates that you must provide a manufacturer code provided in the empty column "pair" the device. Actually, Windows is simply to ask you to wear a code and type it in the box and press enter(say 0000), and then type the same code and press enter on the bluetooth keyboard. FACT. Finish like a boss.

• PP 2015.3 Edit to tape function suddenly not working properly after the update

  I have maybe in a small percentage. I have grown to love PP and have been using it for controlling certain emissions tape HDSR. I think I went from 2015.0 a.3. The reading seems to have suffered in this update. I get now loss of images of PP did not keep in touch with the reading. So put together it on tape fails and insertion don't will go not to the point where there was a framework has fallen.

  There are a few other issues that are easy to manage, but tried to go through telephone support on this issue.

  -Insert video or audio over half the time after insertion is finished, PP gets stuck. The Strip was inserted but the glass remains and to pass to the next punch that I have to cancel the dialog box.

  -PP will are not more than 8 channels of audio. -Final Cut 7 can arm all12, available on our SONY SRW-5800.

  -After the 2015.3 update the PP would go through the motions of insertion on the Strip, but it would not actually insert audio, so if I was not paying attention you'd think they had set just a note QC. But no! PP just doesn't work. This problem has been resolved by removing the preference PP folder in My Documents on Mac OS X.

  So my main problem still remains that reading is basic and is no longer usable for laybacks professional Ribbon. I had to go back to Final Cut 7 and snap a simple 422HQ to tape. There must be something that I am missing, but the time allotted to me to troubleshoot this with time etc etc is limited. What could have changed in the update for the functions to change the band which makes it unusable now?

  I want to really just to install the old version, but phone support wasn't helping me with that and said I couldn't.

  Mac Pro 5.1 12 Core

  OS X 10.10.5

  32 GB OF RAM

  NVIDIA GTX980

  PP 2015.3

  Black Magic Decklink Extreme 3D +.

  Video Fund 10.6.2

  Tape recorder plugged with cable RS - 232 9-pin

  Adobe must have heard our complaints.  The new update of PP 2015.4 seems to have resolved most of the questions that we take.  I always have a random frame dropped here and there.  Export to tape option is viable again in PP 2015.4.  I'm under PP 2015.4 with the latest drivers from the AJA.

• I want to avoid the message "your plugins are not uptodate" appear after each update of the browserpage

  Yes, I know that I have an old iMac to 7 years with a CPU of the stone age.
  Yes, I know that the OS X 10.4 is exceeded.
  Yes, I'm aware that my version of Firefox is no longer supported.
  Yes, I know that some of the plug-ins are outdated.

  But the system works well enough for me, believe it or not, and on the hardware of newer versions do not work. So why call me whenever I update the browserpage these evidences? It's very boring, very unfriendly... (I used almost the words that should never be used in the public space).

  This way of people pushing to abandon something that is always perfectly feasible in my mind not correspond with values than Apple or Mozilla say to maintain, things like "focusing on the satisfaction of users" and "taking care of the environment.

  Please tell me how to disable these messages. Do not I suggest to install Ubuntu on my Mac. I'm about to do already.

  Thanks in advance, fellows.

  P.S. These bad people who might try to hack my machine do not need to know the plugins and versions are on this subject, so I won't list them here. If they took the time to know, they probably already know that I can give you more details.

  Hello quercus_petraea, enter "subject: config" in the location of the browser bar, confirm the information dialog box, then find the preference named "plugins.hide_infobar_for_outdated_plugin" and double click it to switch to 'true '.

  You can also use an addon like flashblock to only enable the flash plugin when you need it (like when you watch a video on youtube) to mitigate the risks while surfing the web.

  Firefox also will not support the ppc architecture longer, however if you want to use an up-to-date browser based on firefox you can switch to "tenfourfox" - on the side tilted, it supports any plugins: Firefox no longer works with Mac OS X 10.4 or PowerPC processors

• IOS 9.3 - I discovered that after that update facebook to 9.3.1, my has been changed

  Facebook app is not good as the previous version of the operating system. After OS 9.3.1 update facebook does not work correctly. I want to say when we go to FB and when I click at any photo, open with details like comments and everything. and to close the photo please click X instead of just dragging.

  Same problem!