Mini dv to g series laptop - no port firewire or expansion slot - HELP!

Similar Questions

• Is it possible to connect my Mac mini to my Mac Pro laptop using the memory on my mac mini for installing software Ableton as I don't have 3 GB available on my Mac Pro.

  Is it possible to connect my Mac mini to my Mac Pro laptop using the memory on my mac mini for installing software Ableton as I don't have 3 GB available on my Mac Pro.

  I want to download Ableton software, but it requires 3 GB of free memory that I have available on my MacPro laptop not because most of it is used for my library of music because I'm a DJ.

  I'm not sure how I can do it or not at all.

  Thank you very much.

  1. a Mac Pro is not a laptop. Its a big desktop computer.  You probably have a MacBook Pro, which is a laptop.

  2. No, you cannot share the memory (live RAM) or storage (disk space, which is not memory) like that between computers.

  However, it is very very bad practice to have so little storage space available for your computer.   If you have less than 3 GB, you should seriously consider an external drive. and unload some files on the outside. Its best not to leave your hard drive to go below 10 GB of free space because it can seriously affect your computer's performance.

• HP - 15 af008ax: my new laptop usb port for the left side does not, only 1 work on 3 Please help me

  My new laptop usb port for the left side does not, only 1 work on 3 Please help me

  Hello:

  Have you installed the drivers for W7 32 bit amd chipset?

  If this isn't the case, you must install them and reboot the PC to get the 3 for usb ports work.

  You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2032

• I have an ASUS X50N series laptop, how do I put back to factory settings?

  I have an ASUS X50N series laptop, how do I put back to factory settings?

  Hello

  I suggest you to contact the Asus support to get help recover to factory settings.

  Factory settings recovery will make your computer like a new computer. You will need to backup all the data so you won't run out of all the data.

  Support from Asus: http://support.asus.com/ServiceHome.aspx?SLanguage=en

  You can also read the following article and check if it helps.

  Support for laptop X50N:

  http://support.ASUS.com/troubleshooting/detail.aspx?SLanguage=en&p=3&m=X50N&s=101&hashedid=CebDKwCn6HTAoNXl&OS=&no=1775

  Note: you must take the backup of your computer, so that you won't run out of all data in your computer.

  Hope the information is useful.

• Unable to connect to a Sony DV from my laptop using the firewire port after the installation of updates

  Original title: connection for Vista FireWire camcorder problem

  I used to be able to connect my Sony DV camcorder to my laptop using the FireWire on the camcorder and laptop.   Once it is connected the Movie Maker detect my camcorder and automatically transfer the video.  However, since I've updated my computer laptop July 13, 2012, my laptop does not recognize not the camcorder.  I checked my computer and your camcorder is not yet listed.  I checked the latest updates for the driver of the firewire port 1394 and is the day the device is functioning properly.  Can anyone throw any light on this.  The only thing I can think is that since the update, he may have done something for the connection.

  Hi Scarlett,

  Thanks for the post. I'm sorry to hear that the Sony DV camcorder is not detected.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.
  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1. What is the model number of the Sony DV camcorder?
  2. you receive an error code or message?

  3 update do you have installed?

  See the Windows updates are installed:

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Please follow the methods and mark the question below:

  Method 1:

  First of all, let us check the status of the FireWire port in Manager devices to do this, follow the steps below:

  Check the status of the port in FireWire devices Manager

  a. Click Start, in the search box type Device Manager and press to enter.
  b. If you don't see the FireWire controller (probably listed under "IEEE 1394 Bus host controllers") in the list, then it is not correctly installed.
  c. If you see a yellow exclamation point, then you must install the drivers, who are usually on a CD that comes with the FireWire card with the camcorder.

  Method 2:

  Step 1:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Step 2:

  A device driver is not installed or a hardware device does not work correctly after you install a Service Pack in Windows Vista:

  http://support.Microsoft.com/kb/948187

  Method 3:

  Connecting i.Link® (IEEE 1394) of the camcorder is not recognized by the computer.

  http://www.KB.Sony.com/selfservice/viewContent.do?externalId=C86798&sliceId=1&MDL

  For more information, see the link below:

  Import analog video to your computer by using a DV camera:
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-analog-video-to-your-computer-by-using-a-DV-camera

  Import video from a videotape:
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-from-a-videotape

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Gateway MD series laptop with Vista once the challenging 'restore point', white screen, will not start, I tried Gateway system and recovery disks, still can not start?

  Gateway MD series laptop Vista OS.

  I tried to install disks system recovery, ordered the bridge.

  The machine do nothing, black screen, no prompt, no way to install the OS, no start upward

  Hello

  did you put the dvd player must be 1st in the boot order

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  _______________________________________________________

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

  http://support.gateway.com/us/en/support/default.aspx

• Please do you intend to produce T series laptop with 15.6 display based on Sandy Bridge?

  Please tell me you intend to produce T series laptop with screen 15.6 inches based on Sandy Bridge processors? Please write soon. I await your response. Thanks in advance, you

  If you scroll down a little ways on www.Thinkpads.com, they say that the T420/T520 will be introduced in February.

• try connecting a printer, mobilefoon or e-reader for my laptop USB port I ad, 2 and 3

  Original title: USB Port

  I am trying to connect a printer, mobilefoon or e-reader for my laptop USB port I ad, 2 and 3.

  There is no device USB not recognized message any device.

  Try a regular wired mouse or the keyboard to test the hypothesis that none of your USB ports work

  If this is the case:

  Start, type device in the text box, select Device Manager

  Right click on the USB one host controllers at once and to uninstall

  Reset

  Which should cause Windows to re - install their drivers

  Let us know the result, please

• G G72 series: laptop will not charge

  About 3 days ago my laptop stopped charging.  I moved the cord around a bit and it looks connected, but does not charge.  I tried most of patches online that I found, but neither has a job.  I've updated the BIOS, ran a battery test, which says it is low, but have not been able to get anything else.

  Is this a problem of battery or a problem of port charge?

  Any help is really appreciated.

  Certainly, who fits the description of a battery with a reduced capacity.

  How long have you used this battery?

  If you have used for three years or more then he gave you good service life. Batteries are only guaranteed for one year.

  I consider:

  the cost of a battery vice the cost of a laptop replacement so she fits in my budget.

• Upgrade port FireWire on Satellite L20

  Can I add a port firewire on my laptop? How?
  I'm so sad because most of the laptop has this port.

  Hi Danira,

  The best way for you to add firewire ports would be a PCMCIA adapter according to this link http://kryton.clickandbuild.com/cnb/shop/directusbstore?productID=73&op=catalogue-product_info-null&prodCategoryID=23.

  Would you firewire capability without having to disassemble your laptop which would affect your warranty.

  Kind regards

• My Alienware ALIENWARE17 series crashes my computer. Can you please help.

  My PC series laptop Alienware 17 keeps crashing. It is said: DRIVER_IRQL_NOT_LESS_OR_EQUAL (bwcW8x64.sys)

  (I bought the thing not so long ago.) So im very disappointed that something like that happens with a laptop 2700 euro

  I googled a bit and I said that it has something to do with my Killer Network Manager. Can you help me please? I tried to reinstall the network manager, it means I've had more problems.

  Kind regards

  Gray

  Just uninstall and install the latest driver of the page I gave you.

• Ports Firewire and PCI Express slot not already busy

  Hello

  I have a Panasonic Mini DV camcorder that has a firewire port (it also has an A / V jack on the front).

  I recently bought a p6623w

  http://support.HP.com/us-en/document/c02479685

  http://support.HP.com/us-en/document/c02560084

  Because this computer includes ports, Firewire and PCI Express slot has been recently filled by a video card, what are my options if I can connect the camcorder to my computer? I have to go the A / V jack route?

  Thank you.

  Do you still have one of the three slots PCI Expressx1 open?

  http://www.Newegg.com/product/product.aspx?item=N82E16815124092&cm_re=firewire_card-_-15-124-092-_-product

  http://www.newegg.com/Product/ImageGallery.aspx?CurImage=15-124-092-TS&SpinSet=15-124-092-RS&ISList=15-124-092-Z01%2c15-124-092-Z02%2c15-124-092-Z03%2c15-124-092-Z04%2c15-124-092-Z05&S7ImageFlag=1&Item=N82E16815124092&Depa=0&WaterMark=1&Description=SYBA%20Add-On%20Card%20Model%20SY-PEX30014

• Computer laptop Windows XP does not start? Help

  Hi I have a windows xp laptop I think that their system eis or something like that... Whenever I start the laptop, he's going on the error you get when your dosent laptop shut down correctly. If I click on start normally the bar will spend about a quarter of the way and then just stayed forever and only safe mode also gets a freeze from then. Y at - it something wrong with the laptop or what. How can I get my laptop to work again... someone help me please.

  It is up to tell you to us what brand of system and the model is... not "system ist or something like that."

  When you choose to start safe mode and you can see all the stuff being loaded and the system crashes, which is the last line on the screen to say?

  If you attached an external equipment, especially USB devices, disconnect everything and then you can see if things seem better.

  If you get an error message windows system config, exactly what he says?

  No error paraphrased messages please!

  It was something like this:

  Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  Which usually indicate some sort of corruption of system files may be a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).  None of this seems familiar?

  If you can boot from a CD, you can create a CD bootable XP (no XP media required) Recovery Console and run chkdsk with correction of errors on the afflicted to start System.

  Here's how:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• I installed CC2015 first on my desk. Now I'm on the road, I can't use the software of my laptop My ID is not recognized. Help.

  I installed CC2015 first on my desk. Now I'm on the road, I can't use the software of my laptop My ID is not recognized. Help.

  You can use the CC as desktop application for up to 90 days as long as the CC is active & has no problem billing. You must connect once within 90 days to maintain the activation.

  Let's get further this issue at our office in response https://helpx.adobe.com/contact.html .

  Concerning

  Stéphane

• Need new laptop - Serial Port

  Hello HP forums

  I've been looking around for a new laptop for some time now and the closest I got to my needs is the HP ProBook 650 G1 but I have a hard time finding with the specifications. I need.

  So if anyone can help me or point me in the right direction, it would be well appreciated.

  Here's my need:

  Built in Serial Port RS232 (a must have)

  Core i7 processor

  16 GB of Ram

  HD SSD 256

  Pretty good grafics (should be able to handle 3D AutoCAD)

  Min 15 "screen

  Danish keyboard

  Windows 7 Pro

  Thanks in advance

  Michael

  Solution with help out of this for a

  HP Probook 650 model G1: F1P32EA #ABY

  with 8 gb extra RAM

  and the change in HD at SSD256