miniature container do not respond?

Similar Questions

• Kindle book pages translate Amazon "not responding".

  Since the update to FF43, Windows Vista, I get a message "Not responding" whenever I visit a web page on Amazon.com that contains the information of product for a Kindle book. For example, http://www.amazon.com/gp/product/B0189WSN9K/.

  I even tried to start FireFox in safe mode and got the same result. I also tried after logging on Amazon, first.

  When I pull up the Task Manager, it shows FireFox with about 25% of the available CPU resources, and the amount of memory used just constantly increases. I let it run for about an hour before ending, and he went from about 350 KB to 3 MB of memory. I suspect that it is in some kind of loop...?

  If I hit ESC at the right time, to stop the page loading, I get a web page that appears complete and functional. But if I'm too late, I just need to put an end to FireFox and restart. Too soon, and I need to try to load the web page again. Usually, it takes about 5 to 10 seconds to get the result "is not responding.

  Others with FF43 told me that they do not have a problem with the web page of the example I gave above. And it works fine for me in Chrome.

  Any ideas or suggestions?

  It is no longer a problem. A later update of FireFox fixed it or Amazon changed something on their site.

• Why my FireFox went painfully slow/Not responding since the last update?

  Since the last update Firefox doesn't want to just not worked for me, most of the Web pages take 20 to 30 seconds to load, and often it will simply not respond and take a minute to load, and when he does have a script error that for google images will forget this topic well in 2 minutes after the message not responding is finally going to my brother also uses Firefox and his works perfectly fine, I disabled all addons and it's the same thing. If I use another browser (Chrome) is super fast, I tried a few suggestions for other positions like firefox high priority and such there is little difference if all don't please makeme use chrome

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions and preferences.

  • Sites Web open is not recorded in less than 25 versions of Firefox.

  To reset Firefox, perform the following steps:

  For Firefox versions prior to 29,0:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the "Reset Firefox" line

     

     button.

  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  For Firefox 29,0 and above:

  1. Click the menu button

     

     click Help

     

     and select troubleshooting information.

  Now, should open a new tab containing your troubleshooting information.

  1. At the top right of the page, you should see a button that says "Reset Firefox"

     

     . Click on it.

  2. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  3. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• Pages of Firefox won't load does not correctly. User name and other action buttons do not respond when clicked. I tried the Java toolkit release, but who doesn't.

  Some sites such as Netvibes and other sites containing columns all of a sudden not correctly displayed. Registration or login buttons do not respond.

  The plugins are up to date.

  You can try the following steps in case of problems with web pages:

  Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Why Mozilla Firefox is not admit profile bug, about 'plugin is not responding' Shockwave problem?

  I am a long time user, more than 10 years, Firefox and Netscape before that. This is the first time I've ever seen "plugin is not responding", and even less for Shockwave. I followed subject suggested solution. Checked plugins updated and reinstalled several even if they were up-to-date. Even reinstalled Firefox. Performed a full scan of Norton on my system (totally transparent). Finally. On the forum to help ADOBE, not on Mozilla (!), someone said blowing their profile and starting again solved the problem. This is a drastic measure, because it nukes all saved Firefox bookmark and setting. BUT THIS MARKET. Dear Mozilla sneaky: you have a bug in PROFILE. Please, admit it and fix it.

  Of course, first try the less disruptive mechanisms. But if they don't work, as they DID NOT for me:
  (1) rename/move your profile truncated (courtesy of a behaviour Firefox bad unknown or ignored) then that is the road - in other words, actually deleted. You can also simply delete the profile.
  (2) then create a new profile
  (3) Optional: If you have saved the wrong profile, try to send it to Mozilla so that they can find and fix their bug

  To locate the file bad profile, follow the instructions in https://support.mozilla.org/en-US/kb/profiles-where-firefox-stores-user-data?redirectlocale=en-US & redirectslug = Profiles

  _{Note from Moderator: ' Rename/move your profile' is not the same as deleting what you always have access to files in the particular profile of things like bookmarks. In addition, if you want to rename or move your profile and automatically create a new default profile, the file to rename or move is the Firefox folder that contains the file profiles.ini. See article profiles for its location.}

• Firefox is already running but is not responding? Simple answers don't seem to work

  I started Firefox earlier today and received a message about a problem with Firefox and he had to be reset. Because the other option seemed worse than the reset, and Firefox Reseting seemed relatively painless, I clicked OK. A short message popped up on the registration of passwords, bookmarks, etc. with success. Then a small window pops up, saying it was cleaning of Firefox. While the process seemed to freeze. I liquidated it, killed at any process of firefox running and attempted to restart Firefox, when I received the message "Firefox is already running, but does not." There is a folder on my desktop labeled 'old Firefox data' which I assume is from Firefox reset (it is also now a copy of the profile on my desk, just in case).

  https://support.Mozilla.org/en-us/KB/Firefox-already-running-not-responding

  I found this and tried to work through it, but it doesn't seem to help.

  (1) Ther' are no Firefox.exe in my task manager, nor is there a process plugin-container.

  (2) I deleted the file "parent.lock" in both the profile (which is just a bunch of jumbled letters and numbers with 'default' in it) and the record of the old Firefox. However, these files were just "parent.lock" not "parent.lock.parentlock".

  (3) did not change the name on it, so unless the reset did before she locked herself, I don't know what to change it to.

  (4) it is not a file share, so...

  (5) this could be a possibility. The folder of Firefox that my profile is 'Read only' is, but I can't not to change cela. Everytime I go in, turn off the 'Read only' option and tell him to propagate the change through subfolders, it seems to work, but when I check the properties 10 seconds later, 'Read Only' is checked again.

  Sounds that the profiles.ini was corrupted when you remove the old default profile and adding the new profile.

  • http://KB.mozillazine.org/profiles.ini_file

  You can have security software that preventing to change the Firefox file.

  You use the Profile Manager to restore an existing profile or create a new profile.

  A "Reset" creates a new default profile with a timestamp attached and is trying to import some settings of the old profile, leaving the old profile intact, including the (invalid) cache folder (topic: cache) can take up to 1 GB.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  Versions of Firefox 15 + will move the old profile folder "old Firefox Data-#" folder on the desktop that gets a figure if you use reset several times, so you can no longer use the Profile Manager to return to the old profile.

  See also:

  • http://KB.mozillazine.org/Profile_Manager
  • https://support.Mozilla.org/KB/managing+profiles
  • http://KB.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows

• Bloody Hell, I install Firefox 4 beta 11 and nothing is loading the home page, and that's all, firefox is not responding

  I run 3.6.13 I tried to install the beta 4. 11, it downloads and installs, it opens the home page, but's, er beat works but Firefox is not responding, I mean as in nothing, he died, you click anywhere on the toolbar, and it's like a dead dog.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container.

  See:

  • Cannot find server - troubleshooting
  • Configure the firewall so that Firefox can access the Internet

• Safari is quit unexpectedly or the Application is not responding

  Since getting a new hard drive installed in my Mac in April through the Apple repair program, I had problems with Safari.  Safari's often freezing, and the application is not responding all the time.  I have to force quit and sometimes it does not work even in the judgment of Safari.  Often, I have to use the power switch on the back to restart my computer because of safari gel.

  I tried the recommendations of apples for Safari gel and spent time with telephone support, cleaning of my library without result files.  I deleted the pop-ups, cleaned the library files, deleted my hard drive duplicate files and cleaning junk files while I have 2.4 to 3 TB is free.

  Other ideas, it could be the cause?

  When the freeze on Safari, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• iPhone 5 s screen sometimes does not respond to touch

  I bought for almost a month, there is however a problem annoying me lately.

  As a first step, the screen did not touch once per day.

  A few days later, this problem happened all too often that I just couldn't ignore it more.

  Fortunately, I found the way to resolve is to turn off the screen and then turn it on (not reboot the phone), so the screen can work again.

  Just as I was about to return to drag it to the screen, the problem of the screen does not appeared immediately, and that just happened to me when you type these words... so I could only repeat these steps once more. I must say that is rarely the case, most of the time, I only need to do this once.

  I would like to ask if anyone knows how to fix this bug (maybe?) completely

  Thank you and sorry for my bad English ^ ^ |

  To make sure that it is not software related, set it back to factory settings, without using any data backup later. Set up the rest of the personal settings manually and test the screen.

  If the screen is working again, restore the last backup. If the problem returns, the data backup contains damaged data, causing your issues.

  If it still does not respond, it is a hardware problem and the phone must be repaired by Apple or an Apple authorized Service Provider:

  Use iTunes to restore your device to factory settings - Support Apple iOS

  Find an Apple authorized service provider

  Apple iPhone - contact Support - support

• Windows XP Pro SP3, OEM in Dell D600 "not responding" on every article, every time, all the windows

  My DELL D600 has OEM Windows XP Pro SP3, and netframeworks all or almost suddenly started not ANSWER DO NOT each time. I don't know what went wrong, it's driving me crazy. I can't afford to upgrade.

  I tried the fixit from Microsoft online, no luck.

  I uninstalled a few programs, perhaps thinking it's too full. Still no luck.

  Whenever I use any folder window, or any element of the queue at all, the same thing happens, every time. "Not responding" delays on the window or the desktop contains the item. Must hit Ctl + Alt + Delete at least twice, if not 3 - 4 times.  Each 'entry' lasts for a number of at least 26 and often much longer.  Basically, Windows is not very functional.

  I have two OEM for Dell, not sure that I put here (I was wondering if I should repair-installation Windows), but worried to destroy my Office Server installations that have 3 WordPress developments.  I can't afford to destroy the.

  Any ideas to FIX this would be greatly appreciated.

  Thank you.

  Good, minor success.

  The returned quickly file number, but a re - check with Roguefix showed, it was not clear, no change in System.

  I therefore decided to start uninstalling things, hoping to uninstall accidentally the culprit.

  First I stripped all the netframeworks and the SPs.  Has failed, file number remained.

  I then started to uninstall programs. After uninstalling programs a half-dozen, suddenly THE FILES ARE WORKING AGAIN!  Don't ask me why.

  Then, I rebuilt my netframeworks and SPs.

  Then, I clicked to access Microsoft Updater to get up to speed.

  IT WILL NOT BE UPDATED.  Failed! is what I get.  It says the software needed TO be updated is not in my HD and offer a download. When I try to download and install failed!  It will be not even installed that.

  This goes back to the same "cause" - for reasons unknown the last 4-6 weeks, installing any updates in my DELL D600 Windows XP Pro OEM.  Initially, they install.  Then begins the phase were some updates installed, others down without reason.

  Then, no updates would be installed.  That was BEFORE I plucked executives trying to solve the issue of records.

  It is not even asking me to install the real test happened before, I think that.  I think it was in August 2013 or almost.

  I'm desperate to get the updates, if you have an idea on how to help me.

  Thank you.

• my windows XP is painfully slow I regularly get the "not responding" in the line of the LTTE (top of the screen)

  my pc is very slow to respond to the mouse clicks that I regularly get the "not responding" in the title (?)   the line at the top of the screen for example "Inernet Explorer (not responding)."

  Ideas please it makes me crazy!

  Rgards

  Eddie

  Hello

  1. What is the full and exact error message?
  2. This only happens when you attempt to use internet explore?
  3. what version of internet explore do you use?

  See the article below to improve the performance of the computer, and then check the issue.

  How to make a computer faster: 6 ways to speed up your PC
  http://www.Microsoft.com/atwork/maintenance/speed.aspx
  Slow PC? Optimize your computer for peak performance
  http://www.Microsoft.com/athome/Setup/optimize.aspx

  You can also view the below article check contains information about the internet Explorer stops answer question.
  Internet Explorer does not start or stops responding
  http://support.Microsoft.com/kb/926449

• Problem of "Media Player is not responding"

  I have an annoying problem with my player and I'm not finding someone else with this problem here. I can't play a video of more than 10 minutes before my Android app announced "media player is not responding" and stop playing the video, then it does not work again until I have restart Media Player. I get the same erorr message if I try to go back into the application before I reboot the Media Player, so the only way to clear it is to reboot. I also have this same problem, even if I let the Media Player sitting there for awhile with no connection (with wifi still running). The wifi stays on even when this message appears, so I do not know whence the failure.

  We have owned this unit for a few years now, but we don't use it when we travel, so it's been a few months that we have used the latter. When I plugged it in this time I was told there was a firmware update so I updated to 3.04 and I'm guessing that it has something to do with this update. I have tried the factory reset but it does not help.

  Anyone have any idea what causes this problem? This makes this device pretty much a brick partial, since it is not a reliable connection more. :/

  Ok problem solved! It is an odd, so thanks for reading this long answer...

  After your last message, I contacted the live chat customer support and spoke to them for almost an hour. Unfortunately, they weren't much help. I felt as if I forcing me to drive me in fixing this thing rather than the reverse. Fortunately I am techie enough where I could do it without problem a lot, but it is always frustrating when they couldn't help. Their last words were for me to everything, including the memory card, format and start again and see if it worked.

  I backed up the videos on the main hard drive on the device and pulled out the memory card all together. Why format when I could just pop out? In any case, I turned on the app to enter in the settings of the drive to format, when I noticed something. I had 10 videos on the main hard drive (noticed it when I backed up the files on my desk), but so far only 3 were detected by the device. Once I pulled the memory card, all of a sudden that all videos have been listed on the main drive. This put in mode 'fix' and I ran a test with the same video, I had problems with.

  The video played throughout! No stopping for 10 to 12 minutes in. So, it's the memory card... OK, that narrows things down...

  Can I back up all the files on the memory card and delete everything on it. I pop the memory card in and play the same video. No problems. OK, so it's a problem with a file on the card. I then had to move 5 files at once on the memory card, then play the video, every time, which means I played the video for 15-20 minutes each time, so it took me all day to understand this. Oy.

  In any case, the problem file? An mp3 player. I have NO idea why an mp3 file was originally my problem, in particular a file I only played again. In fact, my video test was on the main drive and this mp3 was on the memory card. I don't know how a file sitting here would cause problems with any other files on the device. In fact. Lol sense. The name of the mp3 file contained no strange characters, it was just acceptable characters.

  So now that this file is gone everything works very well as he has done before. Hopefully this is the last, if she comes back later then I will study if the memory card has a bad sector on it and see if it is the cause.

  Thanks for reading!

• Extremely slow Webhelp & amp; project does not respond

  I have a file Webhelp containing 270 topics. Two weeks ago, I imported about 50 Microsoft Word files using the RoboHTML to get instructions from Webhelp. Each topic matter content favorite, which I deleted manually. I then had to repair broken links.
  It takes nine minutes to open the first topic. Subsequently, a minimum of four minutes. My sistem is not responding once I have visit four or five subjects.
  
  I uninstalled and reinstalled RoboHTML. I started one archive earlier (30/06/06) where I had already imported a dozen subjects, and I have the same problems.
  
  Technical support (Adobe) had my database since Thursday morning, but I'm short on time! Any suggestions will be appreciated!

  
  My project is working this morning. Today was my turn - I 'fixed it' today, or I started.

  I moved the project to my hard drive. I brought all the file names. I looked for the unnecessary tags. I deleted the cpd and xpj files. Nothing has changed.

  Colum, I followed your advice. I have createed a new project and import my subjects. I tested the project after each 10 htm file imports and the project has worked every time. The last 10 files imported included the CSS and it failed. I created another new project and import only the .htm files and used the default css. It works!

  Thanks for all the help!
  Wendy

• Problem starting el capitan (sierra) - built-in keyboard and the mouse do not respond

  Hello

  I have a 2015 macbook pro (SSD 256, 16 GB of RAM last el capitan updated) with a wired problem.

  I use it mainly to a cinema monitor and I use wireless keyboard and mouse (office installation program), and of course as a stand-alone laptop when I'm not at my desk.

  When I put the laptop to sleep, everything works fine when I wake up.

  but, if I'm away from the office and I have to restart my laptop, here is the problem.

  The boot process is very very slow, there is no edge, and when I finally have the screen to unlock the safe, the keyboard and the touchpad do not react. Actually, that's not exactly true, they are so slow that they are unusable and get caught quickly, all gel. So I can't unlock and complete the boot. My laptop is unusable ;-(

  At this point, I get a message that if I forgot my password I just need to reboot by pressing the power button, and I'll be able to reset it.

  When I do this and aprΦs the dΘmarrage that more slowly than usual but ok, I get another screen with several options of problem solving. One of them is "keyboard not responding do not. When choosing this one, it asks if you want to remove safe. I tried and everything was back to normal.

  later, I delivered safe and I had the same problem again. I did the thing to be able to restart again and improved to sierra in the hope that it would disappear. However, the problem is still there.

  I thought I could try to restart my office to see if my keyboard and wireless mouse would still work. Indeed, even if responsiveness was not normal, I could unlock and fill the chest.

  I have the impression that my laptop always "believe" it is on my desk, linked to my screen (probably the reason why I don't hear the Bell) and to my wireless K & M.

  It's really annoying and I hope someone has a solution.

  Thank you very much

  best,

  Alex

  I'm having a similar problem with macOS Sierra which I didn't have with El Capitan.  I can possibly move the cursor on the power button and turn off (no), but I must be patient because the keyboard and trackpad are only for a fraction of a second, which only allows me to move the mouse slightly.  After he stop and start back up, everything is perfect until I tried another reboot, and then I'm back to the beginning.

  I tried to reinstall the operating system, reset the SMC, resetting the NVRAM, reboot in SafeMode... nothing worked so far.

• touch screen not responding do not in the iOS 10

  Hi all

  I use 6 and recently upgraded iPhone upgraded to iOS 10.

  I started having some strange behavior on my iPhone the day where I put on level to iOS 10.

  My iPhone touch screen is not responding properly. Sometimes I need to wait a minute for a touch of answer, and sometimes it does not. Sometimes, I need to extinguish it with force my phone.

  I never had a single problem with my iPhone 6 before and I think that it happened only after I upgraded to iOS 10.

  I tried to reset the phone and also the factory reset but no improvement.

  Any solution please.

  Thank you.

  Ratna

  Hello

  I'm having the same problem. The 'funny', it's that I have used the last two betas public iOs 10 and did not notice the problem, it seems to have started with the 10.0.1 release official. I tried version 10.1 beta, but the problem persists. Yesterday I went back to iOs 9.3.5, and the problem did not go so far.

  Best,

  Stefan