Missing Console Service switch

Similar Questions

• Screw is missing after service and can't find the right display driver

  Last week, I complained about the weakness of the MIC and I sent mobile care Toshiba in Adelaide. Yesterday, they sent it.

  Problem:

  I checked the laptop carefully and discovered there is a missing screw near the wireless switch. (The type of screws must be F6.5). Pourriez-Toshiba sent me that screw so that I can put that back on?

  problem 2:

  The problem, my laptop had last week was low level of the microphone. I adjusted the level of the microphone to 100% and 0% boost, I can't do something the mic flag shouting at the mic.
  Yesterday when I check the den report, he said "his updated and adjusted video drivers mic boost, replaced mic, update bios, past all the diagnostics unit.

  It worked well when I checked. But for some reason, I need to re - install the laptop. After I reinstalled the system, the same old problem came once again! Then I updated the bios, audio drivers. According to the report, I should update the video driver too. I went to mytoshiba.com.au, in the download page of windows 7 for the P500, I couldn't find the video driver for my laptop. Mine is "NVIDIA GeForce GT230M version = 8, 15, 11-8642". The driver on the web page is '8.634.1 - 090729 a - 086065C - Toshiba AMD display driver.

  I even downloaded and tried to install the video driver. After the extraction is completed, I checked the basic information from this computer. The bios and audio drivers are updated, but the video driver is always the same and low mic level problem is still the same.

  Last week I called twice the phone supports, more than an hour of waiting, spent a lot of time on the forum, made a very ugly box and sent the laptop to the mobile Center, my laptop has been opened and changed the part and sent to me. After all this, I still have the same laptop with the same problem and now missing a screw!

  I appreciate the work that technicians did. They did fix the problem. But I don't want to send the phone to them each time after I re - install the system. So please tell me how to solve this problem.

  Hi sayhi80,

  I doubt that Toshiba you can send this screw but you must contact the service provider allowed again. I'm pretty sure they can send you the missing screws and you can install it yourself. This should take only a few seconds.

  Regarding your question on the display driver: what graphics card you have exactly? If you have an nVidia card, you can install the t AMD display driver.
  In addition, it would be interesting to know what laptop you have exactly. Maybe you can post the exact model number.

  Normally all the drivers are placed on the page of Toshiba

• Adding a network interface in the console service to access a different subnet

  Currently, I have an esx4.1 with a service console host.

  
  It is connected to a 172.20.32 subnet on its virtual switch.

  I have another virtual switch that is not on the supreme court that pertains to a subnet that is dedicated for backups and inter-server communications.  We call this the "back-end network.  It is on the 172.19.8 subnet.

  Our backup software requres that the supreme court have access to the backup target that is on the network "Backend".  I need to implement the supreme court so that he can see this goal and be able to carry traffic through the 172.19.8 subnet.

  Is this possible, and how would I do?

  The easiest way would be to add a second Service Console to the virtual switch on the 172.19.8 subnet

  If you find this or any other answer useful please consider awarding points-

• Missing option to switch the display/music of the song from the Album or playlist without the sidebar

  Problem I see now is that in my music, from the Album view we will tell song reviews, the only possible way is by activating the sidebar. Same thing if I want to see my playlists. I never needed to activate the sidebar to make this appeal.

  

  Same for the television shows, by default, they appear listed by episode and not show or kind, again, if I want to switch the view now I have to activate the sidebar.

  

  Clues will be appreciated if I could be missing something...

  I agree with you.  I know, there was a lot of noise around the latest design, but I loved. I spend 95 percent of my time in the album view and 60% of the recently added.  I found the old, almost full screen view album with recent on top to be perfect!

  I can live with the sidebar, but it seems old-school. What I would love are some filters/translucent navigation that could be invoked quickly and get out of the road. Why are we stuck with the menus, side bars and drop-down lists in 2016?  Why are filtering, display and sort so often confused in a strange and inflexible way in music from Apple apps?

• file missing from service pack 3

  I downloaded a new web cam and it won't work it says miss me a service pack 3 file, the file name is H:\i386 I don't know what to do I do not have the cd

  Hi kjkoala6,

  1. What is the full error message that you receive?

  2. did you of recent changes on the computer?

  This would happen if the web or software device drivers is not properly installed on the computer.

  I suggest you uninstall all the drivers of the device software on the computer and web, later re-download and install the drivers for the web camera, check if it works.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error created another Console service, unable to connect to the host by vSphere vCenter

  After creating an another Service Console unable to connect to the host by vSphere vCenter. How can I remove the now Service Console or make the old one further work well?

  Thank you.

  George

  This KB will show you the steps to re-create the Service Console, but you'll need to console or ILO access to the ESX host.

  http://KB.VMware.com/kb/1000266

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

  Twitter: http://twitter.com/mittim12

• error after creating a console service on vSwitch1 for iSCSI

  For iSCSI, I created vSwitch1 and put a NETWORK card and assigned IP address 10.1.1.1 and 10.1.1.2 default gateway on this (photo 0).

  on iSCSI host 10.1.1.2. The two connenct directly.

  VSwitch0 192.168.1.201, gateway 192.168.1.254 default with another NETWORK card

  Click on property for vSwitch1-> add-> service console

  put the IP address 10.1.1.1 and subnet

  and not changed Service Console Default Gateway (photo 1)

  Finally, get an error message (on photo 2) and the new Console of Service cannot be built.

  So changed Console Default Gateway to 10.1.1.2 Service (photo 3), got an error message too

  George,

  You can have the same IP addresses on the Service Console and VMkernel port!

  Network for software iSCSI Storage configuration describes how to configure iSCSI.

  André

• Console service Partition sizes

  Hi all

  Just a quick my apologies if this was asked and answered before, when installing vSphere I take we must configure the service console scores the same as we did for example 3.5 http://www.yellow-bricks.com/2008/10/23/partitioning-your-esx/

  If, by selecting breakthroughs that I seem to be unable to create the partitions/Boot and vmkcore?

  Kind regards

  Barry

  www.virtualisedreality.com | www.Twitter.com/virtualisedreal

  I write a blog post as we speak...

  Duncan

  VMware communities user moderator | VCP | VCDX

  -

• Please help: registry error 80246008 BITS missing and service for win vista 32-bit

  Hello, I am running Windows Vista Home Premium 32-bit with SP2 and recently met a problem trying to get windows updates. I spent days reading post and the windows support and community application solves nothing doesn't. I receive the error 80246008 so they were trying to get updates. I followed of many positions and patches with a limited degree of success recommended. I have windows update to activate and my COM + service is on and working but my smart information transfer Service does not appear in my register and the list of services. I saw the patches for other versions of windows, but not for Vista, maybe I'm just blind? Any help would be greatly appreciated even if your just pointing me in the right direction. On another note, I can't get MSE update of virus definitions, related question, I guess? Don't know if this helps, but if there is any other information I can provide to assist with a solution let me know and ill update this post with it. A hugh thanks to anyone who can help.

  Hi Thagangrel,

  I see that you get the error 80246008 while trying to install updates. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. you make changes to the computer before the show?

  3. who update fails with this error?

  Method 1.

  Run the utility of automatic troubleshooting of this article.

  Windows Update, error 80246008: http://windows.microsoft.com/en-US/windows-vista/Windows-Update-error-80246008

  Method 2.

  Follow the steps in this article.

  Windows Update, error 80246008: http://windows.microsoft.com/en-US/windows-vista/Windows-Update-error-80246008

  Method 3.

  Start the computer in safe mode with network and perform a virus scan.

  Start your computer in safe mode: http://windows.microsoft.com/en-SG/windows-vista/Start-your-computer-in-safe-mode

  You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 4.

  I suggest that you can exercise SFC scan and check if that helps. The SFC/SCANNOW command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link: http://support.microsoft.com/kb/929833

  Method 5.

  Start the computer in a clean boot state and then try to install the updates. A clean boot to test if any element of service or third party application startup is causing this issue.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:http://support.microsoft.com/kb/929135

  Note: Once you have finished troubleshooting, follow step 3 in the article to start on normal startup.

  Refer.

  Problems with the installation of the updates: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-installing-updates

  Try these steps and let us know the status.

  Thank you.

• Business services switched from blackBerry Smartphones. emails not working not

  I used a unlocked Blackberry Bold 9900 with Rogers in the Canada.  I am in the United States for 5 months and released an ATT plan with data.  I can access the internet, but I'm not getting my emails.  It is said that the Blackberry Internet Service is not connected.  ATT says I need to speak directly with Blackberry to get connected, but it does not seem that option on the site by phone or Blackberry.  Suggestions please.

  Hello

  ATT not quite answered you completely. Indeed, there is no method to contact you BB directly, however... only through formal escalation of a carrier can talk you (for free) to BB directly. It's him formal support how works and ATT have responded you more completely that they did.

  Change of carriers can be tricky. I would advise you to first talk to Rogers and get them to be sure that they have fully released for your device to BB PIN of their system of BIS to 100000%. After that, then check with ATT to be sure that your specific device model is even compatible with their network for AUTOMATIC HRT delivery and maintenance of your appliance.

  If these two are OK, then they (ATT) should be able to set up a BIS account for you in their system. If they cannot, try to get them to tell you exactly why, but do not let you fob off with the answer they gave so far you (because it is impossible to do anyway). They can certainly look deep into their system to tell you what the problem is... for example, unless Rogers really frees your BB PIN of their system, ATT simply cannot create a BIS account to your device.

  In the worst of the worst, I heard that a conference call between the support of BB (note... NOT support the front line, but rather Support dedicated BB) teams of BOTH carriers can sometimes clear up questions.

  But, all in all, unless there is something weirder going on (for example, your BB PIN declared as lost/stolen and locked so far from any business by creating a BIS account), Rogers should be able to release your BB PIN and ATT must then be able to create a BIS account to your device in their system.

  They shouldn't need any involvement of BB to do all this.

  Good luck and let us know!

• How can I get my adobd service switched to my new computer?  I currenlty arrested # AD012103904

  I have a new computer and need my adobe service installed on it - how can I do?

  Please see:

  FAQ: Can I install Creative Cloud on several computers?

  FAQ: How to download and install the Adobe Creative Cloud Desktop App?

  FAQ: How to download and install creative cloud applications?

  You can see answers to other frequently asked questions creative cloud here:

  Forum FAQ Creative_Cloud

• Missing Oracle services

  Hi all

  I installed Oracle 11 g XE on my laptop Windows 8 and it worked perfectly.

  I came to use the other day, and the database would not start. When I explored,

  I discovered that the Oracle Services are gone.

  Also, the registry for Oracle entries seem to have disappeared.

  Database files, program etc. files are all there.

  I have recently upgraded to Windows 8.1 (official release) but I don't know if the two

  are related.

  What I hope is a way to get the existing database running - I kinda

  the work done in the database that I don't want to lose by deleting everything and leave.

  I tried a repair install, but nothing has changed.

  Thank you

  Malcolm

  Re: Windows 8.1 upgrade: all DB Oracle services are deleted!

• Retrieve the console Service NIC.

  In my environment there are 2 SC race, and one of them has been deleted by mistake. We have HP Proliant DL385 G6 running, is it possible to recover...

  VSphere has new command called as Console-Setup... just run it at the root level and you will get different options, including the recovery of SC.

  Review the allocation of points for 'Proper' and 'Useful' answers please.

• When I'm on network connections, MSN said missing in Service unavailable 'Firewall' F... ?

  I guess F means firewall and if I cleck on MSN it goes directly to "firewall.

  I've been here on front support because Microsoft Works memory says when I go to print.  By chance these two things are connected, and if so, how should I treat it

  Hi Patricia,

  I suggest you send the print screen of the error message that you receive on the computer.
  How i: post a screen shot on this forum?
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/how-do-i-post-a-screen-shot-on-this-forum/c86de820-C620-401c-A804-9f6337cd3053
   
  You can create a new user account and check if the problem persists. It could be a user account problem.
  To add a new user to the computer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/usercpl_add_user.mspx?mfr=true
  Answer us with more information on this subject.

• Could not start the Windows Firewall service, missing dependency services

  Hello Dustin,.

  I suggest the steps after booting in safe mode and make sure you copy the entire command from "Windows Registry Editor Version 5.00".

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  Please come back after you have tried the above suggestions.

  Hi, well I thank you that I was finally able to get my BFE run on my computer.  Now, I will try to get my firewall up.

  Thank you once again the copy and paste work.