Missing dependencies in Visual C++ for VISA

Similar Questions

• Need a visual cue for the status of Plugins

  Need a visual cue for the status of Plugins:

  . . . "Ask to activate" - these are light gray - it's good

  . . . "Always enable" - should be in light green

  . . . 'Never turn on' - should be in red light - it currently goes to a slightly darker shade of grey

  Be able to sort them based on the State

  The above would make it easier to verify that they are the way you want

  There is only a ' true/false' = active tribute to work with, so you cannot always distinguish between activate and ask to activate.

  .addon-view[type="plugin"][active="false"]{box-shadow: inset 0pt 0pt 100px rgba(255,144,144,1.0)}

• Visual styles for Windows 7

  Hello

  I need to create a new Visual Style for Windows 7 that will be installed on the client systems as part of Symantec's Ghost Image.

  I read that the custom visual style must be registered with Microsoft. Does anyone know the process on how to record the visual style? Also there is the tools provided by Microsoft to create Visual Styles?

  Thank you
  Rommel

  Rommel Hello,

  The question you have posted is related to the development of Visual Style. The right place to contact you would be supported in MSDN. I suggest you check with the MSDN help for more information.

  http://social.msdn.Microsoft.com/forums/en-us/newThread?category=windowsdesktopdev&Forum

• Visual Basic for Applications

  We have an Excel spreadsheet that has a few buttons built with Microsoft Visual Basic for Applications.  If I install office, Pro 2013, in an appstack, I have a problem "can't find file:vba6.dll.  If I use the same install and install directly to the VM without capture capture an appstack then all the buttons in this spreadsheet work without problem.  By a procmon while pressing the button, I see that Excel is referencing "C:\Program Files (x 86)" \Common Files\microsoft shared\VBA\VBA7.1\VBE7. "." DLL' to VBA in the registry and the file system, which it is supposed to do and the transformation button.  When I do a ProcMon on the appstack reference is made to the snapvolume, which appears as a success however it strikes a "HKLM\." ... Metadata\FS\SVROOT\Program files (x 86) \Common Files\microsoft shared\VBA\VBA7.1\VBE7. "DLL\ #DETELTED # ' and 'HKLM\. '... Metadata\FS\SVROOT\Program files (x 86) \Common Files\microsoft shared\VBA\VBA7.1\VBE7. DLL\SvDeleted"and shows a result of"name not found ".  I guess that's the reason why it fails?

  Anyone else having success or failure with Visual Basic for Applications?

  I got this solved by using the following procedure; hope this works for you:

  The VBA7 DLL was not registered properly, so I had to Open regedit and manually enter the correct path in both

  • HKEY_CLASSES_ROOT TypeLib {000204EF-0000-0000-C000-000000000046}.
    • 6.0\9\win32
    • 4.2\9\win32

  Replace the value of data 'C:\Windows\SysWOW64\msvbvm60.dll' (mentioned in the question) to Visual Basic for Applications for the DLL VBA7 filepath. Which on my system is:

  • C:\Program Files\Common Files\Microsoft Shared\VBA\VBA7.1\VBE7.dll

• one of the icons at the top of my software is missing.   I have those for: open the safe, files, print, share files, customize, reminder, BUT THE ONE for SOULIGNANT A WORD or EXPRESSION IS MISSING, then delete the page, etc.  I have Acrobat Pro 10.  How c

  one of the icons at the top of my software is missing.   I have those for: open the safe, files, print, share files, customize, reminder, BUT THE ONE for SOULIGNANT A WORD or EXPRESSION IS MISSING, then delete the page, etc.  I have Acrobat Pro 10.  How to get back the icon and the missing function?  I would just reinstall, but I get the message that I don't have a legal copy of the program.  However, I bought and paid for it.  Thank you very much for your help!  Carolyn

  Add them to your quick tools. Go help > Quick of the tool.

  

  I've added these tools to my quick tools, as follows:

  

  Also see this article: Adobe Acrobat X Pro * databases the workspace

• UIX Visual editor for the development of the OAF?

  Hi all
  
  Please let me know if anyone has used the Visual Editor UIX for OAF pages developing using JDeveloper 10.1.3.
  Where can we find UIX Editor.
  What is a separate tool that must be installed or built-in sound with JDeveloper.

  It is not a Visual editor for pages of the OFA.

  You will have to wait for the next version of the ORACLE APPLICATIONS, I mean the version of Fusion which has not yet been published.

  The pages of the version of the merger will be personalized with an "overhaul" of jdeveloper (with an extension to interact with applications.) with a Visual Editor.

  Juanje

• Firefox displays a message to install the missing plugin and then asks for a manual installation of apple quicktime, how do I install this plug in?

  Firefox asks me to install the missing plugin, when I visit this website (http://patanjaliayurved.org/ ). I have the following steps, but still nothing happens:

  install the missing plugin > > > > > > apple quicktime > > > > > is not available (manual installation) > > > > > > download > > > install > > > firefox ask again to install the missing plugin

  Hi kanavv,
  you need to download the latest version of QuickTime Player for Windows from Apple http://www.apple.com/quicktime/download/
  If you have problems you can try to remove the existing installation and install again.

  Detailed instructions can be found here: using the plugin QuickTime to play audio and video

  Let us know if this helped!

• NI-VISA 5.1.2 outputs/farm right after launching it on CentOS Linux 6.2 PC, also blocks LabVIEW trying to create VISA constant REF for VISA Open.

  After installing 2011 LaBVIEW and NI-VISA 5.1.2 on CentOS 6.2 PC, I noticed a problem trying to use the LabVIEW vi VISA, basically it does not work for me, LabVIEW crashed when trying to create a control, or a constant for the open VISA vi.  Tried to launch VISA tools, they all start and then close abruptly.  Trace IO OR only shows a single line.

  I read however number of threads and decided to collect the system.log NOR, which is attached. (system.log.gz). I noticed a strange message here on nivisaserver:

  / usr/bin/tail - lines = 25 var:

  22 May 11:18:48 abrtd localhost: 'nivisaserver' Package is not signed with the appropriate key

  22 May 11:18:48 abrtd localhost: corrupt or bad dump /var/spool/abrt/ccpp-2012-05-22-11:18:48-3258 (Re: 2), deleting

  Thank you!

  MountainMan12 wrote:

  After installing 2011 LaBVIEW and NI-VISA 5.1.2 on CentOS 6.2 PC, I noticed a problem trying to use the LabVIEW vi VISA, basically it does not work for me, LabVIEW crashed when trying to create a control, or a constant for the open VISA vi.  Tried to launch VISA tools, they all start and then close abruptly.  Trace IO OR only shows a single line.

  I read however number of threads and decided to collect the system.log NOR, which is attached. (system.log.gz). I noticed a strange message here on nivisaserver:

  / usr/bin/tail - lines = 25 var:

  22 May 11:18:48 abrtd localhost: 'nivisaserver' Package is not signed with the appropriate key

  22 May 11:18:48 abrtd localhost: corrupt or bad dump /var/spool/abrt/ccpp-2012-05-22-11:18:48-3258 (Re: 2), deleting

  Salvation mountain,

  Thanks to attach the report system log - I think I have a solution for you :-) Let's look at some of the lines:

  890: / proc/meminfo:
  
  891: MemTotal:        kB 3894712
  
  1726: / proc/iomem:
  
  ...
  
  1784: 100000000-12dffffff: System RAM
  
  
  1807: / bin/dmesg:
  ...
  1820: RAM BIOS fitness card: 2576: [nipple] more than 4 GB of memory addressable detected.
  ...
  1838: BIOS-e820: 0000000100000000 - 000000012e000000 (usable)
  ...
  2576: [nipple] more than 4 GB of memory addressable detected.
  2577: [nipple] this configuration is not supported.  Check the release notes for more information.

  Starting at the bottom to 2576.2577, dmesg lines had more than just the NI-VISA signature notification server. To start the system, the kernel modules OR refused to load because they detected more than 4 GB of memory addressable. But, if you look upward to the 890.891 lines, meminfo says that you have less than 4 GB of memory system, which makes it appear as modules OR don't know what they are talking about. However, if you look at the report of iomem down on lines 1726.1784, system RAM was relocated above the 4 GB limit. While your system has no more than 4 GB of RAM, part of his memory addresses beyond 4 GB, which can not use modules OR and so they refuse to load. -What happened? Your BIOS has provided a physical map of the RAM with usable over the threshold (line 1838) addresses.

  The difficulty here is simple: you must specify the kernel to reserve addresses beyond 4 GB [1] so that it won't remap RAM into a memory. Once all the RAM addresses below 4 GB, the modules must load and VISA/LabVIEW/al. should stop bad conduct.

  It seems to me that LabVIEW does not handle this situation very gracefully, and maybe you can work with Kira to file a bug report.

  [1] re: success SUSE linux and DAQmx installation; nilsdev and other missing utilities.

  http://forums.NI.com/T5/Multifunction-DAQ/successful-SUSE-Linux-and-DAQmx-install-nilsdev-and-other/...

• Visual Voicemail for blackBerry Smartphones does not sync/reconcile with notification of the icon

  new blackberry... have the 9630 Tour and am very happy so far but I have a few problems with the Visual Voicemail:

  (1) the e-mail inbox voice Visual doesn't save new voice messages... I have to constantly manually "resync mailbox," even if I wait 20-30 minutes for a voice message record once I get a standard notification

  2) once I have listen to Visual Voicemail and delete it, the notification on the homescreen icon do not reconcile that they were listened to... even if I listened to their Twitter.com.

  (3) I would prefer not to receive 3 a new VoiceMail notifications in my main Inbox... I get notification of 1) icon on the home screen, 2) of the "new voicemail" message and (when working) 3) of visual voicemail.  I looked but can't find how to set a preference to filter these redundant messages.

  any help would be appreciated!  Thank you!

  YES... Press the phone icon to get the phone, press the Menu, goto Options.  Select Call Logging, then choose 'None' will benefit more triple notifications, but missed calls still appears in the list of phone.

  With respect to the AVC and the Home icon reconcile... always disturbing.

• missing in the package update for iTunes 12.3.2.35x64 program

  Update iTunes on Windows PC with the 12.3.2.35x64 version 10

  ends with the MSG for a program missing from the package.

  No other indication. The older Version of iTunes remains unchanged.

  Any idea?

  For general advice, see troubleshooting problems with iTunes for Windows updates. Start by Missing MSI errors .

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• NOR-MAX for VISA DURATION 4.2

  Hello

  I posted this on the Narcotics Control Instrument, but maybe it's not in the right place since I didn't get all the answers. Here's my question:

  I have been looking for more than an hour and have not led to what. Is there a version of the NOT-MAX runtime? I have deployed executables LabVIEW on many other PCs and I encounter a problem on one of them where the resource VISA vi does not return the exact list of the COM ports even as drop-down list of the vi box VISA set up a Serial Port. For example, the list box might show COM1 and COM4 COM10, but VISA resource find vi shows ASRL1::INSTR, ASRL4::INSTR, and ASRL12::INSTR (should be ASRL10::INSTR). So I need a program such as NOR-MAX to change the alias on the PC with the execution of VISA 4.2 engine so that it corresponds to what shows the VISA configure Serial Port vi, incidentially, that matches what is shown in Device Manager.

  The PC in question does NOT the LabVIEW development environment installed, so it has NEITHER-MAX. is there a stand-alone exe OR-MAX I can install it on other PCs without the IDE LV? Manual change of visaconf.ini will do the trick? If so, is that what I should remove all aliases, uninstall all external (VCP) ports in the Device Manager, restart the PC (or not) and start again, reconnect the devices?

  Thank you for any help or advice.

  Ed

  James,

  Thank you for your response. Yes, I use the Application Builder and no, I chose not install NOR-MAX, but I see there in my file of project under "additional installers. I will consult the installer to run from the Web site of NOR.

  After that I posted this question, I have experienced yet. I have manually edited visaconf.ini so that numbers ASRL agreed with Device Manager of / ' Windows port assignment and low and behold, it worked! If this happens on the PC client, installation of MAX would probably be best solultion, however.

  Now I'm wondering if the VISA resource find vi is just read this file? I guess that Yes.

  Thanks again,

  Ed

• Missing element of duration of NI-VISA Installer

  We use the LabWindows/CVI 2010 Version 10.0.0 (360) and installed the new environment for running the installation package 5.0.3.31.

  With different projects on different computers, we have the same problem: NI-VISA the runtime cannot be included in the installation package. With older projects which were already distributed get us the error message when you open the "Drivers & Components" tab and click the Red entry for the duration of the visa: "this component is not installed on this system and cannot be included in distributions built on this computer. The duration of NI-VISA reinstalling does not help. The installation is visible in the MDF file and the registry (distributions and products). With a new project, the runtime of NI-VISA of entry does not appear in the tab "Drivers & Comnponents".

  What has gone wrong? We are not able to create any distro at the moment.

  
  

• variable sharing, missing data, the timestamp even for two consecutively given

  Hello

  I have a problem with missing data when I read a published network shared variable.

  Host VI:

  In a host of VI on my laptop (HP with Windows XP Prof.) I write data to the shared Variable 'data '. Between two consecutively write operations is a minimum milliseconds of wait time. I use it because I want to make sure that the time stamp of each new value of data is different then a preview (variables shared the resolution is 1 ms)

  VI target:

  the VI target cRIO-9012 bed only of new data in the way that it compares the timestamp of a new value with the time stamp of the last value on a device in real time.

  Problem:

  rarely, I'm missing a data point (sometimes everything works fine for several hours, transfer thousands of data correctly above all of a sudden failure occurs). With a workaround, I'm able to catch the missing data. I discovered that the missing data have the timestamp exactly the same, then the last point of data read, is so ignored in my data 'legal '.

  To summarize, the missed value is written to the variable shared host, but ignores the target because its timestamp is wrong, respectively the same as the last value, despite the host waits for a minimum of 10 milliseconds each time before writing a new value.

  Note:

  The shared Variable is hosted on the laptop and configured using buffering.

  The example is simple only to display the function of principle, in real time, I also use a handshake and I guarantee that there is no sub - positive and negative.

  Simplified example:

  

  

  Question:

  Anyone has an idea why two consecutively data can have the same timestamp?

  Where timestamping (evil) Finally comes (System?)?

  What would be a possible solution (for the moment with shared Variables)?

  -> I tried to work around the problem with the clusters where each data gets a unique ID. It works but it is slower that comparing the timestamps and I could get performance problems.

  It would change anything when I animate the shared on the RT System Variable?

  Thanks for your help

  Concerning

  Reto

  

  This problem has been resolved in LabVIEW 2010.  You can see other bugs corrections in theReadme of LabVIEW 2010.

• How to create names for VISA resources

  Create a VI to interface with a Tektronix Oscilloscope. Tek drivers all use and transmit handles instrument VISA Resource Name to the format.

  Yesterday, I simply plugged a text string with the characters of text on the Tek pilot and it's happy. String = "GPIB::12:INSTR".

  Today, LabVIEW dislikes this incompatibility of format, and I get an error of the pilot.

  My format of the string looks OK, but I have to do something wrong. None of the tools VISA simplty interrogate the device for his VISA resource name. How to do it?

  Thank you.

  
  

• Waiting for VISA c# on QR

  I am trying to write a simple program in c# (.NET 4.0) to control a Keithley 2400 SMU by VISA GPIB and I'm unable to switch to the program to wait as the demand for services which the Keithley send at the end of the scan.

  The scan is a scan of simple linear voltage controlled internally by the unit Keithley. I have the device configured to receive a ServiceRequest signal at the end of the scan, or when compliance is reached.

  I am able to send orders to the SMU and read data buffer, but only if I manually enter a timeout between the scan start command and the command to read data.

  A question that I have is that I'm quite new to c# - I use this project (some parts of my code LV Portage) to learn it.

  Here's what I have so far for my c# code:

  using System;using System.Collections.Generic;using System.Linq;using System.Text;using System.Threading;using NationalInstruments.VisaNS;
  
  private void OnServiceRequest(object sender, MessageBasedSessionEventArgs e){    Console.WriteLine("Service Request Received!");}
  
  // open the address
  Console.WriteLine("Sending Commands to Instrument");
  instrAddr = "GPIB0::25::INSTR";
  mySession = ResourceManager.GetLocalManager().Open(instrAddr);
  // Cast to message-based session
  mbSession = (MessageBasedSession)mySession;
  // Here's where things get iffy for me... Enabling the event and whatnot
  mbSession.ServiceRequest += new MessageBasedSessionEventHandler(OnServiceRequest);
  MessageBasedSessionEventType srq = MessageBasedSessionEventType.ServiceRequest;
  mbSession.EnableEvent(srq, EventMechanism.Handler);
  
  // Start the sweep (SMU was set up earlier)
  Console.WriteLine("Starting Sweep");
  mbSession.Write(":OUTP ON;:INIT");
  
  int timeout = 10000;             // milliseconds
  // Thread.Sleep(10000);          // using this line works fine, but it means the test always takes 10s even if compliance is hit early
  // This raises error saying that the event is not enabled.mbSession.WaitOnEvent(srq, timeout);
  // Turn off the SMU.Console.WriteLine("I hope the sweep is done, cause I'm tired of waiting");
  mbSession.Write(":OUTP OFF;:TRAC:FEED:CONT NEV");
  // Get the data string data = mbSession.Query(":TRAC:DATA?");
  
  // Close session
  mbSession.Dispose();
  

  All the foregoing is supposed to imitate this LabVIEW code:

  

  So, any ideas on where I'm wrong?

  Thank you

  It turns out that I need to activate the event as a queue rather than a Manager:

  mbSession.EnableEvent(srq, EventMechanism.Handler);
  

  Must be:

  mbSession.EnableEvent(srq, EventMechanism.Queue);
  

  Source: the documentation under the heading "remarks". It was a pain to find documentation about it... NEITHER needs to make it easier :-(.

  With this change, I also don't need to create the MessageBasedSessionEventHandler.

  The final, labour code (with fluff like the namespaces and classes deleted) looks like:

  rm = ResourceManager.GetLocalManager().Open("GPIB0::25::INSTR");
  MessageBasedSession mbSession = (MessageBasedSession)rm;
  MessageBasedSessionEventType srq = MessageBasedSessionEventType.ServiceRequest;
  mbSession.EnableEvent(srq, EventMechanism.Queue); // Note QUEUE, not HANDLER
  int timeout = 10000;// Start the sweep
  mbSession.Write(":OUTP ON;:INIT");
  
  // This waits for the Service Request
  mbSession.WaitOnEvent(srq, timeout);// After the Service Request, turn off the SMUs and get the data
  mbSession.Write(":OUTP OFF;:TRAC:FEED:CONT NEV");
  string data = mbSession.Query(":TRAC:DATA?");
  mbSession.Dispose();
  

  I hope this helps future programmers.