Missing login prompt?

Similar Questions

• I missed the prompt to update my notes. My software is up to date, but there is no option to update notes. How can I get this opportunity again? I want to sketch options and make interactive lists.

  I missed the prompt to update my notes. My software is up to date, but there is no option to update notes. How can I get this opportunity again? I want to sketch options and make interactive lists.

  Open the Notes app and look near the upper left corner to see if the upgrade option is there.

• I want to share folders on my xp pro sp3 PC. How can I configure it so that a login prompt appears when users connect to it as \\ip\shared... ?

  I want to share folders on my xp pro sp3 PC. How can I configure it so that a login prompt appears when users connect to it as \\ip\shared... ?

  Hi Kelvin,

  You can share a folder on your XP by the listed method: http://support.microsoft.com/kb/304040

  Others have an option to connect to your pc as a guest, to make interactive you will need to click on start-> run, type &-> gpedit.msc

  Navigate to Computer Configuration-> Windows settings-> Security-> Security Option settings. On the right side, look for-> ' access network: model sharing and security for local accounts "-> double click and select-> classic-Local user authenticate.

  Now another pc you can access this computer and you will be asked for the username and password.

  I hope this helps.

• Login prompt is no longer Visible

  I am running Vista Home premium. The other day, the Windows login prompt appears after loading the background stopped. In some cases she sparkles in the display for a while, then disappears. If I press ENTER several times, I get the error connection failed - and the login prompt is displayed above the message. Allows me to log on.  However, when I stop the machine, the next time I start up, the guest is gone (again).  so I basically press ENTER, wait for the error message, then connect you when I see invites it - every time.
  Final score: antivirus (AVAST and Microsoft Defender) scans were negative - but the scans were unable to start from a clean boot.

  Any assistance/guidance would be greatly appreciated.

  See if the system restore will do the trick. Choose the date you had session logon screen as your restore point.

  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  If this does not help, try checking the filesystem (CFS):
  

  Start button > Search box type cmd > look up, do a RIGHT click oncmd.exe > click onRun As Administrator > in this window cmd black and white, type at the prompt flashing sfc/scannow > press the ENTER key.
  Note: there is a space between 'sfc' and ' / '.
  To sit and wait. It will take time.
  When finished, exit the cmd window.
  Reboot (restart your computer)

  t-4-2

• not having to ssl vpn login prompt

  Hi all

  This is the configuration for SSL vpn on our ASA 5510.   . If we made the reference to the site configuration, we are unable to get the login prompt. could you please check and suggest you do the work of SSL vpn

  Configuration

  ===========

  WebVPN
  allow outside
  back to url-list Test webvpn
  import webvpn url-list SSL_Bookmarks disk0: / tmpAsdmImportFile1646955469
  delete /noconfirm disk0: / tmpAsdmImportFile1646955469
  internal SSL_users group strategy
  attributes of Group Policy SSL_users
  VPN-tunnel-Protocol webvpn
  WebVPN
  the value of the URL - list SSL_Bookmarks
  type tunnel-group SSL_VPN remote access
  attributes global-tunnel-group SSL_VPN
  Group Policy - by default-SSL_users
  Group-RADIUS authentication server
  attributes of Group Policy SSL_users
  VPN-tunnel-Protocol svc webvpn
  tunnel-group SSL_VPN webvpn-attributes
  enable AnyConnect group-alias
  WebVPN
  tunnel-group-list activate

  ============================

  Version

  ======

  ASA-5510-1 # sh ver

  Cisco Adaptive Security Appliance Version 8.2 software (1)
  Version 6.2 Device Manager (1)

  Updated Wednesday, 5 May 09 22:45 by manufacturers
  System image file is "disk0: / asa821 - k8.bin.
  The configuration file to the startup was "startup-config '.

  ASA-5510-1 up to 57 days 9 hours

  Material: ASA5510, 256 MB of RAM, processor Pentium 4 Celeron 1600 MHz
  Internal ATA Compact Flash, 256 MB
  BIOS Flash Firmware Hub @ 0xffe00000, 1024 KB

  Hardware encryption device: edge Cisco ASA - 55 x 0 Accelerator (revision 0 x 0)
  Start firmware: CN1000-MC-BOOT - 2.00
  SSL/IKE firmware: CNLite-MC-Smls-PLUS - 2.03
  Microcode IPSec:-CNlite-MC-IPSECm-HAND - 2.04
  0: Ext: Ethernet0/0: the address is 0027.0d38.034e, irq 9
  1: Ext: Ethernet0/1: the address is 0027.0d38.034f, irq 9
  2: Ext: Ethernet0/2: the address is 0027.0d38.0350, irq 9
  3: Ext: Ethernet0/3: the address is 0027.0d38.0351, irq 9
  4: Ext: Management0/0: the address is 0027.0d38.0352, irq 11
  5: Int: internal-Data0/0: the address is 0000.0001.0002, irq 11
  6: Int: internal-Control0/0: the address is 0000.0001.0001, irq 5

  The devices allowed for this platform:
  The maximum physical Interfaces: unlimited
  VLAN maximum: 100
  Internal hosts: unlimited
  Failover: Active/active
  VPN - A: enabled
  VPN-3DES-AES: disabled
  Security contexts: 2
  GTP/GPRS: disabled
  SSL VPN peers: 2
  The VPN peers total: 250
  Sharing license: disabled
  AnyConnect for Mobile: disabled
  AnyConnect for Linksys phone: disabled
  AnyConnect Essentials: disabled
  Assessment of Advanced endpoint: disabled
  Proxy sessions for the UC phone: 2
  Total number of Sessions of Proxy UC: 2
  Botnet traffic filter: disabled

  This platform includes an ASA 5510 Security Plus license.

  Serial number: JMX1350L04D
  Activation key running: 0xef04c544 0xf4999c16 0xf4c19950 0x85684c50 0x442c3292
  Registry configuration is 0x1
  Modified configuration of enable_15 to 06:55:11.349 UAE Thursday, November 18, 2010
  ASA-5510-1 #.

  ===================

  Thanks in adavnce

  You can get the activation key for 3des from the license page (it's free):

  https://Tools.Cisco.com/swift/licensing/PrivateRegistrationServlet?DemoKeys=Y

  (Click on Cisco ASA 3DES/AES license)

  It can work with just, however, your browser might not support SOME. The browser asks political there and see if ASA has set up, but I know that a lot of the new browser will not load more, but feel free to try.

• View customer connection receives AD Login Prompt

  I have a configuration of infrastructure from view in a 2-way trust setting.

  When connecting via the trusted domain users (not the domain view servers to sit) users receive an Active Directory login prompt, users can then creds entry there he and connection very well but I would like the guest of autologon, as if the users were sitting in the field of view.

  Is this possible?

  Ok. All you need to do is restart the VMware View Agent service (or just restart their) to pick them up at the new relationship of trust.

• VPN Client Login Prompt Timeout too short?

  Hello

  Client VPN 4.0.3 / IOS 12.3 (2) T4

  Is it possible to change the default time-out for the name of username/password prompt? By default, users has only 30 seconds to enter their credentials.

  I found IOS command 'login timeout reply' that does exactly what I want, but it seems that this order cannot be applied under lines.

  Thanks for your help

  > isakmp xauth timeout crypto

  will do the trick for you.

• missing login screen of windows users 8

  All of my users still there... whem I'm looking for by control panel users or users directory.

  But in connection to the account administrator 1 single screen direct connection... I can´t change to another...
  All users is not disable...
  Please help me... I thing I did something wrong, when the printer sharing to other laptops in the House...
  This problem is in my office...
  Thank you

  Hello

  If you have multiple users on your desktop, then while a user is on the login screen, click on the down arrow shown here in front of your name. Lists all users on the computer. Make sure you are the administrator of your system.
  Hope this helps, good luck :)

• Cannot connect to PayPal due to the unreliable login prompt

  I can't access the secure site https://www.paypal.com/fr. Whenever I try to load the site, the following message appears (see attachment), without the possibility to add an exception. My system is Microsoft Windows 8.1 x 64 Edition Build 9600, I use Mozilla Firefox 37.0.2, I'm also using Kaspersky Internet Security, version 15.0.0.463 (b).
  I will be grateful for any assistance with this, thank you,

  Martin Svoboda

  Dear cor - el,

  Thank you very much for your help. I think finally the Cert folder, it was hidden, of course, but with the help of this thread here https://support.mozilla.org/en-US/questions/1020310, I could post it and find exactly what I needed.
  The PayPal site load perfectly now, thank you again!
  All the best, have a good night (if it's the night you have now),

  M.

• Welcome to bypass screen & login prompt

  When I boot (Windows XP Professional SP3), I get the home screen or the classic fast logon screen. I don't want one of these, I want my computer to boot completely up to the desktop computer. I am the only user/administrator and don't require all accounts.

  1. click on start, run, type "control userpasswords2" (without the quotes) and click OK or press ENTER to open the Windows 2000 user accounts application.
   
  2. in the users tab, clear the users must enter A user name and password to use this computer, then
  Click OK.
   
  3. in the automatically log on dialog box that appears, type the user name and password of the account that you want to be
  logged on each time you start your computer.

  wrote in message News: * e-mail address is removed from the privacy *...

  When I boot (Windows XP Professional SP3), I get the home screen or the classic fast logon screen. I don't want one of these, I want my computer to boot completely up to the desktop computer. I am the only user/administrator and don't require all accounts.

• fingerprint login prompt

  Whenever I use to connect to hotmail or facebook or anything else, the guest of fingerprints would come and ask me knocking on swiping, but something happened and now it does not appear and I am connected automatically.  How can I get the guest of fingerprints to the top?

  Hello

  Using Microsoft Fingerprint reader?

  If you are using Microsoft Fingerprint reader, refer to the link and check if that helps:

  How do I add, change, or remove a fingerprint logon by using the Fingerprint Logon Manager for use with the fingerprint reader

  http://support.Microsoft.com/kb/899626

• The population of the connection string in database in the default login prompt

  Add this in the formsweb.cfg file:

  
  

  UserID = @DATABASEID

  In Forms 10 G, it works to pre-fill the id of database in the field of database screen to default logon for the user does not have to enter.  This does not work in Forms 11 G. How this can be accomplished in Forms 11 G?

  Hello sharpe

  Check this.

  Hamid

• Cannot receive login prompt on Windows 7 (Alt + Ctrl + delete question?)

  Hello

  I had a recording of the show in an instance of VMWare running windows 7 using VMWare Player.  When I try to send Alt + Ctrl + delete using all known methods (button, menu drop-down option menu and Alt + Ctrl + insert).  When I click on these options, nothing happens.  Expected behavior is the password, quick to open it.

  The instance is unlocked as I can click on the help button with the mouse on the screen 'Please hit Alt + Ctrl + delete' of Win7.  I know that the keyboard connects when I restart I get an option to secure the keyboard mode.  Safe mode has the same problem.  Alt + Ctrl + Del does nothing.

  I even tried to recreate the instance of VMWare using version 7 of the converter (this corrects a problem for me in the past) and it has not fixed the problem.  I tried everything I can think of at the moment.  I appreciate any suggestions.  Thank you!

  Edit by wila quit VMware Fusion® (for Mac) for VMware Player

  This solved my problem

  Re: HELP my keyboard does not work in my virtual machine!

  I had to uninstall lenovo drivers.  Once I did as soon as I uninstalled and reinstalled the PS2 driver on the vmware instance the driver loaded without error and the keyboard worked.

• Change the command prompt based on the user login

  Hello
  
  I work in 11.1.1.5(11g) OBIEE. In my environment, OBIEE is integrated with OAM and user gets if authenticate in the OID Database.I a requirement where in cases that we have two users(user1,user2) and guest (prompt1, 2 guest)
  
  Example:
  If 1 1 user login prompt should get the display and 2 2 so quick connection of the user should get a good view.
  
  Can anyone help on this?
  
  Thank you
  Padmini

  With the help of the Administration-> catalog manage set permissions at the prompt and add the page. Based on the permissions that they might see respective guests

  If brand aid

• Database password prompt

  Afternoon everyone,
  
  When you visit a URL APEX on our intranet for the first time, we receive a login prompt that asks you a username and password. It will not accept an Oracle username and password, and then redirects to the APEX login screen. Cancelling the prompt redirects to a 401 "authorization required". We want to bypass the first Oracle login prompt and just go directly to the APEX login screen.
  
  Any ideas that we might be missing? Is there a setting in the DAD that will bypass this first prompt connection? Helpful suggestions are appreciated!
  
  Aaron

  Hello Aron,

  Can you post your content files here DAD? Perhaps you have not specified the parameters PlsqlDatabaseUserName, PlsqlDatabasePassword ?

  It will not accept an Oracle username and password

  It accepts any user/password Oracle or only specific name ID / password?

  Kind regards
  Hari