missing parameters in labview

Similar Questions

• Homekit missing parameters

  I recently bought a few lights of hue and the new hue Bridge 2.0 (HomeKit Compatible)

  I am running iOS 10 on my iPhone 6 s and the latest version of tvOS (9.3.3) on a new 4th generation Apple TV.

  The new home app works correctly, which allows direct control from lights.  Apple TV works fine for the tasks of automation that have been configured in the application of the House.

  However, I am not able to connect to my lights when I'm not connected to the local WiFi network.

  Reading the various forums, there should be a HomeKit element in the application of the main parameters and an option to reset the HomeKit configuration in the privacy settings.

  Two of these elements are missing on my phone.  I have the factory to reset my phone and used an alternative iCloud account and settings appear, to go again when I have to reconnect my own iCloud account.

  

  When I login with another account HomeKit appears in the first picture under settings, and the ability to reset the HomeKit configuration appears in the second.

  The only information I can find suggests turning on/off, no change keychain.  I also have factory reset the AppleTV, the problem persists.

  My guess is that my data HomeKit has been corrupted in my account iCloud, without the reset option I am rather stuck.

  Any ideas to fix this would be appreciated!

  See if it might help - Accessories use HomeKit compatible with your iPhone, iPad and iPod touch - Apple Support

• IMAQ or Palette IMAQdx missing function in LabVIEW

  I take the capture of web - cam with Labview IMAQ. However, when I installed the toolkit, IMAQ or IMAQdx missing in Labview function palette. I tried a few solutions of LAbview support as:

  http://digital.NI.com/public.nsf/allkb/A451D3CCBB740716862578FC004DB392

  However, my problem is not solved. I await your response.

  Hello

  When I uninstall the current SAV, then I reinstall VAS_2014_08_f1. After this situation, the problem has been resolved.

  Thanks for the reply.

• Table of parameters of labview

  Hello

  I want to join UInt8 tables (MSB/LSB) to an array of UInt16.

  

  If I run that in LabView is not a problem.

  But when I call to TestStand, there is no full Out parameter.

  

  After I run the Teststep there are no values in the Locals.MSBLSB table. Is there any parameter, I had to put this LabView can write in the Locals.MSBLSB table?

  Respect,

  René

  So what values you have in the two tables locals.lsb and locals.msb because if these are empty tables so you will not get any output?

  Concerning
  Ray Farmer

• Stop the search for the missing files from LabVIEW

  Is there a way to prevent the search for lack of screws LabVIEW? If I load a VI and one of its dependencies is spent, I want LabVIEW to fail immediately and to wonder where is the file.

  What version of LabVIEW are you using?

  Just hit ignore.  It stops to load files that it cannot find and load than it can.

• InStr.lib missing after installing LabVIEW

  Greetings,

  We have a q SMU-1062, which was profesional of LabVIEW and FPGA (2012 SP1) module installed. Due to some issues we had to uninstall both of them.

  I uninstalled someother drivers think that they would be installed with the installation of the new software. Now, Ive installed both programs of return and try to run a

  application tool (.exe in LabVIEW) but I get messages on the attached images. I can send more pictures if needed.

  I have experience relatively little in LabVIEW and do not know how to solve the problem. Any help, I appreatiate.

  Thanks in advance!

  Jorge Garza

  I would recommend to reinstall the driver.

  Use the most recent:

  NOR-DAQmx 14.5 - National Instruments

• Missing parameters for a specified time

  I'm going to pull metrics of specific servers for a specified period of time, and these data are not available.  What could be the cause of these data are available?

  Hello Raul

  Can you please clarify what you mean by "trying to shoot metrics of specific servers for a specified period of time"?  You try to get Foglight today to retrieve the parameters of servers on September 27 between 13:13 and 13:56?  Most (all?) agents have had a limit of one hour for the collection of historical data from servers.

  Brian

• SQLNET.ora Network Configuration file "missing parameters".

  Hello gurus;
  
  Earlier I create sqlnet, ora by NETCA
  My SQLNET.ora contains following information only...
  
  
  sqlnet.ora # Network Configuration file: /u01/app/oracle/product/10.2.0/db_1/network/admin/sqlnet.ora
  # Generated by Oracle configuration tools.
  
  NAMES. DIRECTORY_PATH = (TNSNAMES)
  
  
  * > > Help > > *.
  why he did not show all parameters? Here is something wrong?
  I need to set SQLNET. AUTHENTICATION_SERVICES = NONE

  952909 wrote:
  Hi EdStevens

  Not able to connect to the database without entering a user name and password.

  Yes, we know. You said, in almost all positions, you did on this subject. We got that. Believe me, we understand that. Can we move on to solve your problem?

  [oracle@localhost ~] $ sqlplus /.

  SQL * more: Release 10.2.0.1.0 - Production on sat 22 dec 19:12:30 2012
  Copyright (c) 1982, 2005, Oracle. All rights reserved.
  ERROR:
  ORA-01017: name of user and password invalid. connection refused

  Because everything counts OS logged as that doesn't have an account AUTHENTIFIE of BONES in the database.

  but I can connect like this,

  [oracle@localhost ~] $ sqlplus

  SQL * more: Release 10.2.0.1.0 - Production on sat 22 dec 19:12:17 2012
  Copyright (c) 1982, 2005, Oracle. All rights reserved.

  Enter the user name: ops Sham $
  Enter the password:
  Connected to:

  Because, despite the "ops$"... ops$ feint isn't an authenticated OS account. This is a database of authenticated account. It's only a database of authenticated account because you gave it a password. From your previous post to Justin:

  -quote from the previous post to start-

  SQL > CREATE USER ops$ sham IDENTIFIED EXTERNALLY.
  Created by the user.
  -suspend - quote

  OK, at this point, you have an authenticated os account "$ops Sham".

  -quote to continue-
  SQL > GRANT CONNECT TO the Sham ops$;
  Grant succeeded.
  -suspend - quote

  Now, the operating system account 'sham' should be able to connect with a simple "sqlplus / '.

  -quote to continue-
  SQL > grant dba to simulacrum of ops$;
  Grant succeeded.
  -suspend - quote

  Now, anyone who uses the operating system account 'sham' can connect without a password and have all the privileges listed in the role of "dba".

  -quote to continue-
  SQL > alter the simulacrum of $ ops user identified by shamos.
  Modified user.
  -end quote-

  But now change you your account "$ops Sham" and gave it a password. OPS$ feint is therefore more than a bone authenticated account. It is now a database authenticate the account, but with a rather misleading name. At this point, if you are trying to connect as "sham of the ops$", you will need to provide a password.

  Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
  With partitioning, OLAP and Data Mining options

  Note: most web links either saying, we can choose to connect with DB.
  I want to know the difference why this sqlplus command / error display

  Because you're tying to use authentication with an operating system account that is not an operating system os authenticated account in the database. Put "ops$" on the name of the account is NOT what makes an authenticated os account. What makes authenticated os sets the account as "identified on the outside. If you create as 'identified by somepassword', OR if you CHANGE to 'identified by somepassword' then it is NOT authenticated os.

• PDF file creation, missing parameters

  Acrobat Professional. 6.0.

  I've never used acrobats 'Create a PDF file of the file', as in my MS Office 2000, there was no menu "Acrobat - convert to Adobe PDF" with the possibility to modify the parameters of the joboptions.

  My current MS Office 2007 now has its own PDF Renderer only, so I tried the function of acrobats "create a PDF file of the file". It works, but the settings button is grayed out with all types of Office files. I have not found a way how to access the parameters of acrobats, then I tried first Distiller of opening and changing the options there. Nothing has happened, the output of Acrobat has always the same size file and quality. Of course I could make PDF from office by printing to the Adobe PDF printer, but how to deal with other types of files that are not of the Office types.

  Thanks for the suggestions, i.e. to show me what I finally did not consider.

  I have and Bernd tried to say. AA6 can't stand OFFICE 2007. The fact that you have PDF Maker of AA6 working in WORD 2007 is surprising. Since it is not a normal or supported, we do not know what to tell you. It should even be does not work. You are the first person I ever heard say they have the PDF Maker AA6 (create PDF is how it manifests) working in OFFICE 2007!

  So, I may have misunderstood. But I'm telling you that none of us have experience with configuration. Adobe will tell you also simply to update. Unfortunately, leaving you on your own to experiment. If you have questions about the path according to your comments, we would be happy to try to help, but don't expect too much.

• Missing parameters with update 12.4 iTunes

  With the latest update to iTunes, I no longer get the settings tab in iTunes to my device.  I need UNSYNC playlists to make room for new playlists.  How unsync the playlists on my Iphone now using iTunes?

  LLA device icon should appear in the box to the upper left, under the title bar. If you don't, iTunes might not recognize your device.

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

• Need help, make the missing parameters.

  Where can I get the free recovery file? I had a virus, the file has been deleted, I handled my to save my laptop but now I need to reformat my laptop. Thank you for reading this and some info gives hope that it helps me. Thank you.

  When you request support, please provide the number of name and/or product of comprehensive model of the HP computer in question. HP/Compaq made thousands of computer models which are all different. Without this information, it can be difficult, even impossible to help you solve your problem.

  Your image is in the approval process and cannot be seen by other members.

  When you first set up your computer you have been requested by HP to create your personal set of HP recovery disks. If you do not create these disks, you will need to order a set of HP or a third party provider. The "recovery" file is not available for download and must be ordered. It will most likely be a cost attached to the order of these discs.

  Please send BRAVO

• Pocket cinema Camera RAW looks like color corrected and missing parameters of the source?

  Hello. I shot compressed lossless CinemaDNG RAW on my Pocket film camera. I swallowed the images via the media browser that worked well. Now the problem, all the footage looks like a LUT has been applied. Anyone know why this is and how to remove it? 'The Source settings' option is also unavailable on the clips that I shot. Can anyone recommend a solution please? I'm under Premiere Pro CC 2015.

  There is no way to remove the first appearance does not apply, which seems to be a lut rec709, but details should be recoverable, not cut. the settings of the source has been moved to the effects of the main element. Select the clip, and then go in the effect controls panel to see. lumetri color tools has some of the same controls if you want to just use those.

• Trainer of OCR OR in LabVIEW

  Hi friends,

  I am using the NI trainer OCR in LabVIEW module directly which is now accessible only in vision assistant. But it is not loadable, and I'm not able to open the VI it draws vision assistant OCR. Is there a way to call NI LabVIEW trainer OCR?

  Currently, the command line arguments, I mentioned is the only way to pass parameters between LabVIEW and OCR training executable.

  Once you're done in the training interface, if you have made changes, the software prompts you to save the character set the file at the specified location.

  In LabVIEW, you can use the OCR screws located in the Machine Vision > palette OCR open file character set and get all of the properties that have been defined in the training interface.

  Watch the screw IMAQ reading OCR Character Set file, IMAQ OCR property.

  Hope it makes sense.

  Christophe

• BIOS R4 Aurora missing options

  Hello

  I have a R4 with a build-date late 2013 (see datasheet below) version of the BIOS A11 running. I installed my videocard to an EVGA GTX 1070, and when I went into the BIOS, I noticed that the CPU power management Configuration page is now empty... is there literally no options at all. I'm missing all parameters that were there, including basic multipliers and other parameters of overclocking.

  Selection of the "load OC level 1" or "load OC level options 2" in the previous page had no effect on the missing parameters. I downloaded and re-flashed with the A11 BIOS update on the Dell Support site, but there has been no change.

  Main screen of the BIOS:

  

  The Advanced tab:

  

  CPU power management Configuration screen:

  

  I'm not sure what happened, or even when it happened. I can't be sure the timing of the correlates of problem BIOS to upgrade the hardware... it was a month since I was last in the BIOS. Also, at the same time, I applied a large update of Windows (the Windows 10 anniversary update) and installed a new its PCIe card. Too many changes to be able to cancel for testing purposes.

  Any ideas what's happening? I'm unable to OC my computer.

  Data sheet:

  Aurora R4, the Service tag

  BIOS version A11

  Win 10 Pro (x 64) v1607 (Build 14393)

  Core i7 - 4820K @ 3.7 GHz

  EVGA GTX 1070 FTW ACX3.0

  16 GB of RAM

  512 MB SSD / 1 TB HARD drive

  Heyo noodle,

  CASS ole was asked if I could put some info here, so here goes:

  Recently, I update my R4 Aurora as well.  A little older than you, I have an i7 3930 and it was A3 BIOS about it.  I've updated my BIOS before installing my Radeon R9 380 4gig and 16gig new RAM card.  I had Flash the BIOS A05 first then A11 BIOS on the Dell site.  I installed the A11 version about a month ago.  I checked my BIOS and I have the same options that Cass ole, looks like.

  http://i655.Photobucket.com/albums/uu272/Chuckrock2004/dellscreen.jpg

  I also have the same version of Windows 10.

  Chuck

  I don't have an its PCIe card.

• Pass parameters to the box of the HTML form to a stored procedure

  I'm always looking for a solution to my problem of forms. For the record, I don't use Express applications to create my application - I use PL/SQL right. I need to know how to pass parameters from the box to my Web form. I welcome people select one or more checkboxes in a form that calls a remove function to delete the selected records. What I read in Oracle of the "Guide to the developer of database applications - Fundamentals" is not useful to me. If someone could tell me some examples, maybe I could see what I'm doing wrong. Here is what I wrote in "the developer of database applications - fundamentals Guide ':
  
  All the boxes with the same NAME attribute are a group of checkbox. If none of the boxes in a group is selected, the stored procedure receives a null value for the corresponding parameter.
  
  If a check box in a group is selected, the stored procedure receives a single parameter of VARCHAR2.
  
  If more than one check box in a group is enabled, the stored procedure receives a parameter with the type of PL/SQL TABLE OF VARCHAR2. You must declare a type like this, or use a pre-defined as OWA_UTIL. IDENT_ARR. To retrieve the values, use a loop:

  CREATE OR REPLACE PROCEDURE handle_checkboxes ( checkboxes owa_util.ident_arr )
  AS
  BEGIN
  ...
  FOR i IN 1..checkboxes.count
  LOOP
  htp.print('<p>Checkbox value: ' || checkboxes(i));
  END LOOP;
  ...
  END;
  /
  SHOW ERRORS;

  I'm not sure that understand what your question is.

  If your web form has the following defined all with the same name:

  one
  two
  three
  

  You create and save a procedure to manage the sending of a form that contains a parameter with the name of attrib type owa_util.ident_arr for example:

  create or replace procedure handle_form(attrib owa_util.ident_arr) as
    iter number;
  begin
    for iter in attrib.first .. attrib.last loop
      -- do something with attrib(iter)
    end loop;
  end;
  /
  

  Now, the only problem with this Manager (or any other), is that if the user selects any of the boxes, or no value for the parameters expected, the Manager called with parameters missing or with on all of the passed parameters, as well as the call will error.

  To move, you need to provide default values for all parameters passed to your handler such as the settings of ident_arr, but with ident_arr settings, it's hard to do with autonomous procedures. If you place your procedure in a package you can define variables of package-level of the appropriate types that can be used as default values:

  create or replace package my_web as
    empty_arr owa_util.ident_arr;
  
    procedure handle_form(attrib owa_util.ident_arr := empty_arr);
  end my_web;
  /
  create or replace package body my_web as
    procedure handle_form(attrib owa_util.ident_arr := empty_arr) as
      iter number;
    begin
      for iter in attrib.first .. attrib.last loop
        -- do something with attrib(iter)
      end loop;
    end;
  end my_web;
  /
  

  now, when you hit in the situation where the user does not select the checkboxes, the call to handle_form will be no reviewable error on due to missing parameters, and the empty_arr will not have all the elements to iterate over so the loop in the body of the procedure will be fine and you will be able to retrieve each value of the checkbox selected attrib table when you iterate on it.