missing partition

Similar Questions

• Difficulty to get a quick Web work - "missing partition HP_TOOLS" error

  How can I make fast web work, I do the instalation and it gives me an error about a missing partition HP_TOOLS

  Your laptop (HP ENVY 17 - 1191EL) doesn't support all Quickweb. The specifications are available online on here . In case if you supports of Quickweb laptop, the BIOS screen would be an option something like the image below

  

• Bootcamp deleted missing partition, but can not recover the partition space

  Tried to install 10 Windows via Bootcamp on my Mac. First, I formatted the bootcamp partition. Then I got the following message: could not create a new partition or locate an existing one. For more information, see the Setup logs files.

  

  I tried five times with Bootcamp installed Windows 10. Then I advice to delete the partition and create a new. So I did. Still did not work. When I rebooted my mac, 50 GB missing as you can see here:

  

  I tried to restore the partition, but there is no possibility to do so, as you can see here:

  

  I read so many posts that I don't know what to do anymore. I don't mind factory reset my macbook, but it will restore my lost partition as I probably only erase the 450 GB instead of the 500 GB SSD?

  I read in several messages (this one in general: Bootcamp Partition missing during startup) that this information might be required, so I added from the outset:

  diskutil list:

  

  Cs diskutil list:

  

  sudo TPG - vv - r see the/dev/disk0:

  

  sudo fdisk/dev/disk0:

  

  
  

  I hope someone can help me restore my 50 GB, I lost. Even once, I do not fear factory reset my macbook if that's the best way to solve this problem!
  

  Can you use doesn't have windows via bootcamp 8.1 installation as reference to reclaim your disk space?

• Satellite L500 - recovery missing partition

  Hey guys. NEED HELP

  How can I load windows 7 on my HARD drive with the missing recovery partition?
  And no I don't have a copy of it just windows 7

  Help

  Hello

  If you didn t create a disc of recovery, then you will need to order the CD from here:
  http://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• Missing Partition Recovery

  Hi, I'm missing some partitions that ive accidently deleted a small partiotion about 10 GB, which seemed emoty according to me. In any case, when I try to do a full restore it gives me the error message missing a recovery partition. I was about to reinstall Windnows manually, but the serial key does not work with on install 8.1 or version 8.0 even win too!

  Can you tell me how to reset my system completely fixing perhaps the partitionjs of recovery or is there a download of recovery for laptop HP Envy M6?

  Thakns in advance for any trusted positive.

  IF your computer ends by - us or - ca you can order recovery media, except that you may download official windows 8 ISO:

  https://docs.Google.com/file/d/0B2Km8yMR1BUxQjNIek5yVmlzZ00/edit

• Reg: Objects & missing partitions while import datapump

  Hi Techies,
  
  I need urgent assistance on the case below I am facing currently.
  
  I imported a schema using DATAPUMP and it failed with the error "Failed to extend the tablespace" and for this dynamically when requested, I added a space.
  
  Its a grand scheme to export 120G dump file.
  
  The import log showed as completed successfully and when the AD team working on it they they found misssing some of the objects & partitions and it will be about 1000 + partitions.
  
  The one you suggest how to solve this problem without refreshing again...
  
  Thanks in advance...
  Satya

  user10972727 wrote:
  Hi Techies,

  I need urgent assistance on the case below I am facing currently.
  .. misssing some objects & partitions...
  The one you suggest how to solve this problem without refreshing again...

  Say your team AD to set "a little." exactly which opposes and what partitions are missing. With this information, you can start new export only objects and the partitions that are missing, then import them and you will have the full data set, you don't have to import in the first test.

  The one you suggest how to solve this problem without refreshing again...

  There's no other way to do it logically correct. You could possibly play and have fun with links to the database and to add the missing items through some SQLs, but something as I have explained in a few lines above is certainly the more normal way to do it when you have scenario you described

  Thanks in advance...
  Satya

• Using Bootcamp - missing partition

  Hello, I tried to install Windows 10 using bootcamp.

  It seemed to work very well, and then restarted in. X OS (under OS X 10.11.6) when I look for the partition, it is not found. I have a 500 GB hard drive and it is currently show only 370 available. Disk utility shows only a single drive. I tried to uninstall windows using boot camp, now it will ask only to install again but I have no more space in the partition.

  Would simply return to a partition, or if possible correctly install windows. I appreciate all help.

  Please after the release of the following OS X Terminal commands.

  diskutil list

  Cs diskutil list

• Re: Missing Partition during startup Bootcamp

  Hello

  could you please please help me, I have the same problem, did the same thing! I have had this results

  < published by host >

  Please start a new thread and post the output of

  sudo dd if = / dev/rdisk0s5 account = 1 2 >/dev/null | hexdump - C

  disk0s4 is the new partition you created and Bootcamp moved to disk0s5.

• EliteOne 800: HP_RECOVERY and HP_TOOLS missing partition after re-install-why only on one system?

  Short:

  After you have reinstalled Windows Pro 8.1 with the original OS from HP on two EliteOne 800 DVD, I got scores HP_RECOVERY and HP_TOOLS on a PC, but not on the second.

  Long:

  So I got two new 800 EliteOne out of the box, as well with blue screen (iastorA.sys). Sad quality question, but nevertheless, I got the 8.1 original DVD Pro with systems. So I reinstalled completely the two systems. Two BIOSES have the same exact parameters, the two systems are actually identical.

  First installed very well system. The DVD of 8.1 drivers to install all the drivers, including Intel RST and SSD caching.

  I see drive d (HP_RECOVERY) and drive E: (HP_TOOLS). At the time of startup, F11 works. In Windows, diskmanager shows all partitions.

  Now to the second system. Installation went smoothly as well, BUT... I don't see the additional partitions. So F11 will obviously not work.

  What happens here?

  I also recognized that on the second system, the drivers are not installed properly. Installing the software on the drivers disk HP tells me that everything is installed and I need to reboot, but no. On the next check, drivers were not installed.

  What else can I check?

  DH

  After that I got a 3rd system with exactly the same issues, I believe that this is a generic problem with this type of system.

  I formatted all drives outside the system. I used the Bootcd (i.e. UBCD) to do the same while the disc was still in the system.  Finally, I was able to successfully install the 3rd system. But I have in vain on the 2nd.

  In any case, I put this in the list of the mysteries. I haven't the time more to study.

  Overall, I am deeply disappointed with these HP systems.

  Dan

• Satellite L300-2This - WLAN card not recognized and missing partition

  Hello

  has obtained 2This Satelite L300, came empty, XP is installed, are not a tool to determine the inside wireless network card, downloaded the realtek drivers and toshiba astheros, none doesn't work, also have no idea how to determine which card is inside, and how to remove previously installed drivers, link on toshiba to the determin built in WiFi does not work

  Passing over the first set of instructions followed to create a D partition on the HARD drive, for some reason any now have only C with 130 GB so that D is not specified, no idea how to fix

  a big thank you in advance, cheers, Aleks

  Hello!

  You can determine the type of wireless network card if you check the vendor and device ID in Device Manager. Enter the two codes on this Web site and you see what WLAN car you have: http://www.pcidatabase.com/

  Regarding your question on the partitions on the HARD disk, you should look in disk management. Maybe you need to format the first partition or create an extended partition.

  Good bye

• Cannot restore Y500 - missing partition Recovery.

  I had two of the same OS Windows 8.1 on my Y500 (cloned from the original SSD). Then, last night I tried to 'refresh without affecting your files' option for my OS on the HARD drive so I have a new OS to go back to incase anything happened. then on the screen of Lenovo, it said that the E: drive is being updated as well so I panicked and turned off the computer. Now, I can't access either of the OS. What should I do? I made a return to the top just before and aft of the files are still there in a partition on the HARD drive, I did. I used a boot Puppy LInux USB to see the files on my HARD drive but it wouldn't let me transfer it to an external hard drive. I'll try to install a linux better and try to transfer the OKR files to another drive.

  -How would I go about restoring the backup of files if I were to bring on another drive?

  Hello

  Look at this post where I explained how to install windows on the Y500 without the restore partition. Remember that your license key is integrated in the system, you don't need a key:

  http://forums.Lenovo.com/T5/IdeaPad-Y-U-V-Z-and-P-series/IdeaPad-Y500-HDD-defect-how-to-install-wind...

• Missing Mac 8.1 Windows partition and Bootcamp

  So, I have seen very similar messages and followed several forums, but I can't yet figure out what to do next.

  I have 8.1 Windows on my Mac.  I wanted to repartition the Windows partition and make bigger it because I was running low on space, and the Windows partition is what I use it mostly for graduate studies.  About a year ago, I took an easy youtube video and used Mini Wizard Partition re-partition space and it worked perfectly.  I have found the same video and tried to repartition the Windows partition again, but apparently I royally screwed up.

  My BootCamp is not yet visible more in disk utility.  Under the partitions, there is an option called "disk0s4" greyed, but I'm not allowed to do something with it.  I can't verify or repair.  If I go to Applications, BootCamp Assistant is there, but he wants me to start the installation of BootCamp.  It was not an option to restart Windows more, and when I turned on with alt + market, Windows was not an option more.

  I followed this tutorial:

  http://nerdr.com/bootcamp-partition-lost-repairing-Mac-partitions/

  and when I restarted my Mac, restart Windows was an option. So I thought that I fixed it! EVIL.  My screen was black and said: 'Missing Operating System '.

  I downloaded EaseUS Data Recovery Wizard for Mac (because it was another suggestion), and I was able to recover and see the files on the NTFS disk0s4, so I'm quite positive, they have not all been completely erased.  Or at least the part of basic Windows is still there.  I can't recover the drive to anything, because it tells me that I will just be fitness on the same drive, and I honestly don't know how to retrieve these files will help with the side of the partition of things.

  I also used TestDisk and it seemed to find my missing partition, but in the middle of analysing it, it says something like "disk too small."  After further research, I went through and took only the most recent score that seemed to be deleted with NTFS, and when you are trying to do, it would allow me to make a 'logic' partition because he said something in red, as 'bad file.'

  My Mac still works perfectly, but I'm terribly need to recover my windows.  All suggestions are useful!  Thank you!

  Last login: Wed Mar 9 16:30:28 on ttys001

  Anna-Owenss-MacBook-Pro: ~ acowens1$ sudo gdisk/dev/rdisk0; "exit";

  GPT fdisk (gdisk) version 1.0.1

  WARNING: Open with shared lock devices will not have their

  table partition automatically reloaded!

  Scanning partition table:

  MBR: hybrid

  BSD: absent

  APM: absent

  TPG: present

  Found a valid GPT with hybrid MBR; using GPT.

  Command (? for help): p

  Disk/dev/rdisk0: 625142448 sectors, GiB 298,1

  Logical sector size: 512 bytes

  Identifier (GUID) of disc: 0000429B-368F-0000-CB2D-000003440000

  Partition table contains up to 128 entries

  First usable sector is 34, last usable area is 625142414

  The partitions will be aligned with the boundaries of sector 8

  Space free total is 277435021 areas (132,3 GiB)

  Starting number (sector) end (sector), Code name of size

  409639 40 1 200.0 MiB EF00 EFI system partition

  2 409640 268314855 127.7 giB customer AF00

  3 268314856 269584391 619.9 MiB AB00 Recovery HD

  4 547018752 625141759 37.3 giB 0700 BOOTCAMP

  Command (? for help): r

  Recovery/processing command (? for help): o

  Size of the disk is 625142448 areas (298,1 GiB)

  MBR disk identifier: 0x0000711C

  MBR partitions:

  Code of State sector Boot start end sector number

  1 1 547018751 primary 0xEE

  2 * 547018752 625141759 0 x 07 elementary school

  Recovery/processing command (? for help): h

  CAVEAT! Hybrid MBRs are flaky and dangerous! If you decide to not use one,

  Simply press enter at the prompt below and your partition table MBR will be

  be intact.

  Type one to three GPT partition numbers, separated by spaces, to be

  added to the hybrid MBR, in order: 2 3 4

  Partition of EFI GPT (0xEE) place first in the MBR (good for GRUB)? (Y/N): y

  Create entry for the #2 GPT partition (partition MBR #2)

  Enter a hex code MBR (default AF): n

  Set the bootable flag? (Y/N): n

  Create entry for the #3 GPT partition (partition MBR #3)

  Enter a hex code MBR (default AB):

  Set the bootable flag? (Y/N): n

  Create entry for the #4 GPT partition (partition MBR #4)

  Enter a hex code MBR (default 07):

  Set the bootable flag? (Y/N): y

  Recovery/processing command (? for help): o

  Size of the disk is 625142448 areas (298,1 GiB)

  MBR disk identifier: 0x0000711C

  MBR partitions:

  Code of State sector Boot start end sector number

  1 1 409639 primary 0xEE

  2 409640 268314855 primary 0 x 01

  3 268314856 269584391 primary 0xAB

  4 * 547018752 625141759 0 x 07 elementary school

  Recovery/processing command (? for help):

  I followed the suggestions of the post, but I was not allowed to use the option of 3 4 5 or rather 2 3 4 type, because #5 has been "too big or did not exist."  I'm at the point where I should be typing w (write) but I won't enter this command if it is not correct.

• Partition lost on virtual memory internal after windows bootcamp

  Hi guys

  Then I used the function of bootcamp recently to implement a part of windows on my mac, I'm on the Macbook Pro and using El Capitan 2012 edition.

  I went through the whole process and left my mac making partitioning, when I got home that the loading screen was just my mac normal one and when I went to utility disk that I couldn't find the partition I had chosen for the part of windows. that is, I miss him now 150 GB.

  I need help, either to the mac originally 500g so I can try again, or there at - there a way to find the missing partition?

  I tried a few terminal codes, but I am very new. Here are all the partitions I, don't notice no bootcamp or windows partition at all.

  Andrews-MacBook-Pro: ~ the andrewilsley list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,1 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 499,2 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  / dev/disk1 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD GB + 349,9 disk1

  Logical volume on disk0s2

  Thanks and greetings

  Hello, Chewwy65!

  Thank you for using communities Support from Apple. From your post, I understand you are trying to use Boot Camp Assistant to install Windows on your MacBook Pro, but cannot find the partition you created, although it is clear that the storage space allocated to this isn't on your Mac partition. I understand that need this score available, or at least be able to recover the storage of him and am happy to help you.

  First, try the instructions in the section "Delete partition" in the following article:

  Set up Windows on your Mac partition

  If you are not able to delete the partition using Boot Camp Assistant than the above article orders, then back up your Mac partition, wipe your hard drive and reinstall OS X and try Boot Camp Assistant again.

  If you are not familiar with the backup of your data, you can use the article below to walk you in place and using Time Machine.

  Use Time Machine to back up or restore your Mac

  After you have saved it, go through the steps described in the section below to erase your hard drive. Since El Capitan is your startup disk, you will need to load the computer in recovery by pressing command + R on the keyboard while turning on Mac.

  Disk utility (El Capitan): delete a volume

  Then, reinstall OS X using the following article.

  How to reinstall OS X

  After OS X has been reinstalled, use section to ensure that your Mac is compatible with the version of Windows that you are trying to install and then try again Boot Camp Assistant.

  Minimum system requirements to install Windows on your Mac using Boot Camp

  See you soon!

• Cannot use the Windows Partition

  So, I have seen very similar messages and followed several forums, but I can't yet figure out what to do next.

  I have 8.1 Windows on my Mac.  I wanted to repartition the Windows partition and make bigger it because I was running low on space, and the Windows partition is what I use it mostly for graduate studies.  About a year ago, I took an easy youtube video and used Mini Wizard Partition re-partition space and it worked perfectly.  I have found the same video and tried to repartition the Windows partition again, but apparently I royally screwed up.

  My BootCamp is not yet visible more in disk utility.  Under the partitions, there is an option called "disk0s4" greyed, but I'm not allowed to do something with it.  I can't verify or repair.  If I go to Applications, BootCamp Assistant is there, but he wants me to start the installation of BootCamp.  It was not an option to restart Windows more, and when I turned on with alt + market, Windows was not an option more.

  I followed this tutorial:

  http://nerdr.com/bootcamp-partition-lost-repairing-Mac-partitions/

  and when I restarted my Mac, restart Windows was an option. So I thought that I fixed it! EVIL.  My screen was black and said: 'Missing Operating System '.

  I downloaded EaseUS Data Recovery Wizard for Mac (because it was another suggestion), and I was able to recover and see the files on the NTFS disk0s4, so I'm quite positive, they have not all been completely erased.  Or at least the part of basic Windows is still there.  I can't recover the drive to anything, because it tells me that I will just be fitness on the same drive, and I honestly don't know how to retrieve these files will help with the side of the partition of things.

  I also used TestDisk and it seemed to find my missing partition, but in the middle of analysing it, it says something like "disk too small."  After further research, I went through and took only the most recent score that seemed to be deleted with NTFS, and when you are trying to do, it would allow me to make a 'logic' partition because he said something in red, as 'bad file.'

  My Mac still works perfectly, but I'm terribly need to recover my windows.

  Here are my findings from a similar position:

  Last login: Wed Mar 9 16:30:28 on ttys001

  Anna-Owenss-MacBook-Pro: ~ acowens1$ sudo gdisk/dev/rdisk0; "exit";

  GPT fdisk (gdisk) version 1.0.1

  WARNING: Open with shared lock devices will not have their

  table partition automatically reloaded!

  Scanning partition table:

  MBR: hybrid

  BSD: absent

  APM: absent

  TPG: present

  Found a valid GPT with hybrid MBR; using GPT.

  Command (? for help): p

  Disk/dev/rdisk0: 625142448 sectors, GiB 298,1

  Logical sector size: 512 bytes

  Identifier (GUID) of disc: 0000429B-368F-0000-CB2D-000003440000

  Partition table contains up to 128 entries

  First usable sector is 34, last usable area is 625142414

  The partitions will be aligned with the boundaries of sector 8

  Space free total is 277435021 areas (132,3 GiB)

  Starting number (sector) end (sector), Code name of size

  409639 40 1 200.0 MiB EF00 EFI system partition

  2 409640 268314855 127.7 giB customer AF00

  3 268314856 269584391 619.9 MiB AB00 Recovery HD

  4 547018752 625141759 37.3 giB 0700 BOOTCAMP

  Command (? for help): r

  Recovery/processing command (? for help): o

  Size of the disk is 625142448 areas (298,1 GiB)

  MBR disk identifier: 0x0000711C

  MBR partitions:

  Code of State sector Boot start end sector number

  1 1 547018751 primary 0xEE

  2 * 547018752 625141759 0 x 07 elementary school

  Recovery/processing command (? for help): h

  CAVEAT! Hybrid MBRs are flaky and dangerous! If you decide to not use one,

  Simply press enter at the prompt below and your partition table MBR will be

  be intact.

  Type one to three GPT partition numbers, separated by spaces, to be

  added to the hybrid MBR, in order: 2 3 4

  Partition of EFI GPT (0xEE) place first in the MBR (good for GRUB)? (Y/N): y

  Create entry for the #2 GPT partition (partition MBR #2)

  Enter a hex code MBR (default AF): n

  Set the bootable flag? (Y/N): n

  Create entry for the #3 GPT partition (partition MBR #3)

  Enter a hex code MBR (default AB):

  Set the bootable flag? (Y/N): n

  Create entry for the #4 GPT partition (partition MBR #4)

  Enter a hex code MBR (default 07):

  Set the bootable flag? (Y/N): y

  Recovery/processing command (? for help): o

  Size of the disk is 625142448 areas (298,1 GiB)

  MBR disk identifier: 0x0000711C

  MBR partitions:

  Code of State sector Boot start end sector number

  1 1 409639 primary 0xEE

  2 409640 268314855 primary 0 x 01

  3 268314856 269584391 primary 0xAB

  4 * 547018752 625141759 0 x 07 elementary school

  Recovery/processing command (? for help):

  Now, my major dilemma is that in the original post, he said to the partition of the hybrids with the numbers of 3-4-5, but I was unable to do so.  When I tried 5, he said "partition does exist or is too large."  So I used the 2 3 4 numbers.  Now, I'm at the point where I use the w command (to write), but I don't want to do it if I didn't the other steps correctly.

  1 mini Partition tool is very dangerous and should never be used on a Mac, in particular, more than once.

  2. article NERDR is the most irresponsible article about these issues and causes and exacerbates still more data loss.

  3. Please do not rewrite the MBR/GPT with Gdisk.

  4. you must return to Testdisk. TestDisk is used only for scanning, not for the updates. All updates using Gdisk, not binding Testdisk, once the right partition headers have been found.

  5 Please after the release of

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

• Windows 7 RTM Installer deleted logical Partitions

  My computer has two physical hard disks, each with multiple partitions. I did a custom installation of Windows 7 Professional RTM on the first hard disk, deleting an old primary partition containing Windows XP (which wouldn't start). However, after I installed Windows 7, ALL of my logical partitions on this disk had also disappeared. The Windows 7 Installer creates two primary partitions: the big partition I realized it, and a partition of 100 MB system reserved. (It is always not allocated the remaining space on the disk, as the new partition for Windows 7 was smaller than the Windows XP partition, which I've deleted.)

  Former route:

  GiB 250 NTFS (primary)
  100 MiB ext2 (primary)
  3 logical partitions (two ext3, a FAT32)
  100 giB encrypted (primary)

  New layout:
  100 MiB NTFS (primary)
  149.9 giB NTFS (primary)
  Unassigned 100 GiB
  100 MiB ext2 (primary)
  115,66 giB space (!) free where the logical partitions used to be
  100 giB encrypted (primary)

  It seems that the installation program has decided to get rid of my extended partition. How can I recover my old logical partitions?

  I managed to restore the missing partitions to aid CGSecurity's TestDisk, but it took some doing. Always, however, the fact that the Windows 7 Installer has deleted my partitions without asking confirmation is more worrying. That's what I guess happened:

  Disc has 3 primary partitions and one extended partition, before starting the installation.
  I told the installer to remove a primary partition and create a new one in its place to install Windows 7 on. He wanted to do a second primary partition, so she won another partition to delete. He didn't tell me that. He said he may need create additional partitions, but nothing has been said to delete those that already exist.
  The Setup program has installed Windows 7, and my extended partition was gone (so logical partitions inside it were no longer accessible).

  I recommend strongly anyone install Windows 7 on a disk that contains several other partitions to create a partition for Windows 7 in advance (using the management of disks or DiskPart.exe), instead of using Setup to do. In this way, it will not create the partition of MiB 100 extra.