Missing when files organized by 'months '.

Similar Questions

• error message saying a .dll file is missing when I try to acess Mngr.vdmdbg task not found.

  I have uninstalled or deleted my Windows XP Pro VDMDBG.dll because I received error messages after

  I am now using the same IDE on this DIY PC like what I used to have XP Pro running. I ran an upgrade or r disc install to resign the drivers and at the same time you run some programs to uninstall some of the OLD drivers of the motherboard and temporary files, but I must have too deep because now, I have only this error message telling me that a .dll file is missing when I try to acess Mngr.vdmdbg task was not found. Reinstalling the application may fix this problem. Where can I go to download or difficulty this annoyance file or program? Thankx again! -Al

  Sounds messy.

  If you see a message like this:

  Taskmgr.exe - Unable to locate component
  This application has failed to start because VDMDBG.dll is not found.  Reinstalling the application may fix this problem.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:
  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you will not see the extension of file (.exe, .dll, .cpl, .sys, etc), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, it cannot save the file with an extension (for example, .exe, .dll, .cpl, .sys) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called vdmdbg when the name of the file should really be called vdmdbg.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

  PS Microsoft support engineers - "try running sfc/scannow and check if it helps" will not replace the missing vdmdbg.dll file because it is not what sfc/scannow does.  If you want to see an experiment to prove that, let me know because I have a ready-made.

• Waiting for redo log file missing when restore main database using RMAN backup that was taken on the database physical standby

  Here's my question after tons of research and test without have the right solutions.

  Target:

  (1) I have a 12.1.0.2 database unique main enterprise 'testdb' as database instance running on the server "node1".

  (2) I created physical standby database "stbydb" on the server "node2".

  (3) DataGuard running on the mode of MaxAvailability (SYNC) with roll forward in real time 12 default c apply.

  (4) primary database has 3 groups of one-man redo. (/oraredo/testdb/redo01.log redo02.log redo03.log)

  (5) I've created 4 standby redo logfiles (/oraredo/testdb/stby01.log stby02.log stby03.log stby04.log)

  (6) I do RMAN backup (database and archivelog) on the site of relief only.

  (7) I want to use this backup for full restore of the database on the primary database.

  He is a DR test to simulate the scenario that has lost every primary & Eve total servers.

  Here is how to save, on the database pending:

  (1) performance 'alter database recover managed standby database Cancel' to ensure that compatible data files

  (2) RMAN > backup database;

  (3) RMAN > backup archivelog all;

  I got elements of backup and copied to primary db Server something like:

  /Home/Oracle/backupset/o1_mf_nnndf_TAG20151002T133329_c0xq099p_.BKP (data files)

  /Home/Oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.BKP (spfile & controlfile)

  /Home/Oracle/backupset/o1_mf_annnn_TAG20151002T133357_c0xq15xf_.BKP (archivelogs)

  So here's how to restore, on the main site:

  I clean all the files (data files, controlfiles oder all gone).

  (1) restore spfile from pfile

  RMAN > startup nomount

  RMAN > restore spfile from pfile ' / home/oracle/pfile.txt' to ' / home/oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.bkp';

  (2) modify pfile to convert to db primary content. pFile shows below

  *.audit_file_dest='/opt/Oracle/DB/admin/testdb/adump '

  * .audit_trail = "db".

  * full = '12.1.0.2.0'

  *.control_files='/oradata/testdb/control01.ctl','/orafra/testdb/control02.ctl'

  * .db_block_size = 8192

  * .db_domain = "

  *.db_file_name_convert='/testdb/','/testdb /'

  * .db_name = "testdb".

  * .db_recovery_file_dest ='/ orafra'

  * .db_recovery_file_dest_size = 10737418240

  * .db_unique_name = "testdb".

  *.diagnostic_dest='/opt/Oracle/DB '

  * .fal_server = "stbydb".

  * .log_archive_config = 'dg_config = (testdb, stbydb)'

  * .log_archive_dest_2 = "service = stbydb SYNC valid_for = (ONLINE_LOGFILE, PRIMARY_ROLE) db_unique_name = stbydb'"

  * .log_archive_dest_state_2 = 'ENABLE '.

  *.log_file_name_convert='/testdb/','/testdb /'

  * .memory_target = 1800 m

  * .open_cursors = 300

  * runoff = 300

  * .remote_login_passwordfile = "EXCLUSIVE."

  * .standby_file_management = "AUTO".

  * .undo_tablespace = "UNDOTBS1.

  (3) restart db with updated file pfile

  SQLPLUS > create spfile from pfile='/home/oracle/pfile.txt'

  SQLPLUS > the judgment

  SQLPLUS > startup nomount

  (4) restore controlfile

  RMAN > restore primary controlfile to ' / home/oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.bkp';

  RMAN > change the editing of the database

  (5) all elements of backup catalog

  RMAN > catalog starts by ' / home/oracle/backupset / '.

  (6) restore and recover the database

  RMAN > restore database;

  RMAN > recover database until the SNA XXXXXX; (this YVERT is the maximum in archivelog backups that extends beyond the scn of the backup of the data file)

  (7) open resetlogs

  RMAN > alter database open resetlogs;

  Everything seems perfect, except one of the file log roll forward pending is not generated

  SQL > select * from v$ standby_log;

  ERROR:

  ORA-00308: cannot open archived log ' / oraredo/testdb/stby01.log'

  ORA-27037: unable to get file status

  Linux-x86_64 error: 2: no such file or directory

  Additional information: 3

  no selected line

  I intended to use the same backup to restore primary basic & helps record traffic and the downtime between them in the world of real output.

  So I have exactly the same steps (except STANDBY restore CONTROLFILE and not recover after database restore) to restore the database pending.

  And I got the same missing log file.

  The problem is:

  (1) complete alert.log filled with this error, not the concern here

  (2) now repeat it in real time apply won't work since the Party shall LGWR shows always "WAITING_FOR_LOG."

  (3) I can't delete and re-create this log file

  Then I tried several and found:

  The missing standby logfile was still 'ACTIVE' at present RMAN backup was made.

  For example, on db standby, under Group #4 (stby01.log) would be lost after the restoration.

  SQL > select GROUP #, SEQUENCE #, USE (s), the STATUS from v$ standby_log;

  GROUP # SEQUENCE # USED STATUS

  ---------- ---------- ---------- ----------

  4 19 ACTIVE 133632

  5 0 0 UNASSIGNED

  6 0 0 not ASSIGNED

  7 0 0 UNASSIGNED

  So until I take the backup, I tried on the primary database:

  SQL > alter system set log_archive_dest_state_2 = delay;

  This was the Group of standby_log side Eve #4 was released:

  SQL > select GROUP #, SEQUENCE #, USE (s), the STATUS from v$ standby_log;

  GROUP # SEQUENCE # USED STATUS

  ---------- ---------- ---------- ----------

  4 0 0 UNASSIGNED

  5 0 0 UNASSIGNED

  6 0 0 not ASSIGNED

  7 0 0 UNASSIGNED

  Then, the backup has been restored correctly without missing standby logfile.

  However, to change this primary database means break DataGuard protection when you perform the backup. It's not accept on the production environment.

  Finally, my real questions come:

  (1) what I do may not do on parameter change?

  (2) I know I can re-create the control file to redo before delete and then recreate after. Is there any simple/fast to avoid the standby logfile lost or recreate the lost one?

  I understand that there are a number of ways to circumvent this. Something to keep a copy of the log file waiting restoration progress and copy up one missing, etc, etc...

  And yes I always have done no real-time applies "to the aid of archived logfile" but is also not accept mode of protection of production.

  I just want proof that the design (which is displayed in a few oracle doc Doc ID 602299.1 is one of those) that backs up data backup works effectively and can be used to restore the two site. And it may be without spending more time to resume backups or put the load on the primary database to create the database before.

  Your idea is very much appreciated.

  Thank you!

  Hello

  1--> when I take via RMAN backup, RMAN does not redo log (ORL or SRL) file, so we cannot expect ORLs or SRL would be restored.

  2nd--> when we opened the ORL database should be deleted and created

  3rd--> Expecting, SRL should not be an issue.we should be able to do away with the fall.

  DR sys@cdb01 SQL > select THREAD #, SEQUENCE #, GROUP #, STATUS from v$ standby_log;

  THREAD # SEQUENCE # GROUP # STATUS

  ---------- ---------- ---------- ----------

  1 233 4 ACTIVE

  1 238 5 ACTIVE

  DR sys@cdb01 SQL > select * from v$ logfile;

  GROUP # STATUS TYPE MEMBER IS_ CON_ID

  ---------- ------- ------- ------------------------------ --- ----------

  3 /u03/cdb01/cdb01/redo03.log no. 0 online

  /U03/cdb01/cdb01/redo02.log no. 0 2 online

  1 /u03/cdb01/cdb01/redo01.log no. 0 online

  4 /u03/cdb01/cdb01/stdredo01.log WATCH No. 0

  /U03/cdb01/cdb01/stdredo02.log EVE 5 No. 0

  DR sys@cdb01 SQL > ! ls - ltr /u03/cdb01/cdb01/stdredo01.log

  method: cannot access the /u03/cdb01/cdb01/stdredo01.log: no such file or directory

  DR sys@cdb01 SQL >! ls - ltr /u03/cdb01/cdb01/stdredo02.log

  -rw - r-. 1 oracle oinstall 52429312 17 Oct 15:32 /u03/cdb01/cdb01/stdredo02.log

  DR sys@cdb01 SQL > alter database force claire logfile 4;

  change the database group claire logfile 4

  *

  ERROR on line 1:

  ORA-01156: recovery or current flashback may need access to files

  DR sys@cdb01 SQL > alter database recover managed standby database cancel;

  Database altered.

  DR sys@cdb01 SQL > change the database group claire logfile 4;

  Database altered.

  DR sys@cdb01 SQL > ! ls - ltr /u03/cdb01/cdb01/stdredo01.log

  -rw - r-. 1 oracle oinstall 52429312 17 Oct 15:33 /u03/cdb01/cdb01/stdredo01.log

  DR sys@cdb01 SQL >

  If you do, you can recreate the controlfile without waiting for redo log entry...

  If you still think it's something is not acceptable, you must have SR with support to analyze why he does not abandon SRL when controlfile_type is "underway".

  Thank you

• I use a PC.  Problem: When you try to export my photo developed in the library, a message appears that says, "can't export, or offline or missing Source files."  How can I get my picture exported to my hard drive?

  I use a PC.  Problem: When you try to export my photo developed in the library, message box appears that says, 'impossible to export... '. Offline or missing source files. "How to fix this to export my photos on my hard drive?

  Lightroom is not in the expected location that he thinks that the photos are in the photos.

  This can happen because you have (perhaps accidentally) moved, renamed or deleted photos or folders containing them outside of Lightroom.

  The solution is to use your operating system to find the new location of the photos. Take note of where they are. Then in Lightroom, you can reconnect to them through these instructions: Adobe Lightroom - find folders and files moved or missing

  As an alternative, if the files were simply moved (and not renamed or deleted), you can use your operating system to move towards where Lightroom is expected to make them.

• because I get this message when I load my site "may be missing some files on the server or incorrectly" help me please

  because I get this message when I load my site "may be missing some files on the server or incorrectly" help me please

  "Some files on the server may be missing or incorrect" Warning Message

• "The missing config file corrupt" error message appears

  When I start my laptop, I get the "Missing config file corrupt" message and I can't start windows, it falls needs the original installation cd-rom!

  It seems that I do not have this cd? That I should?

  I don't want to just do a restore from the hard drive that I'll lose everything.

  Any ideas?

  Please, I beg you!

  Hello

  Have you tried booting in safe mode?
  If it is possible, then you can try to use the System Restore tool under Programs Accessories System Tools, you should find.

  Try to roll back the OS to the beginning. Well, if this procedure doesn't help then as said jmatthews you save files on the other computer and reinstall the operating system.

• Satellite Pro L300 - missing dll. files after the installation of the printer

  Hello

  I have missing dll. files on my Pro L300.
  When I try to install my printer software it throws an error message upward.
  I now have the missing dll. files, but can't seem to install them. Someone knows what to do with them?

  I am running XP and the files are sccbase.dll slbcsp.dll

  I have listed this question before, but it has never been on the forum?

  Thank you very much

  Q

  Hello

  I searched and slbcsp.dll sccbase.dll and found someone who had the same problem after installation of the printer software.
  Check out this site:
  http://forums.CNET.com/5208-6142_102-0.html?ThreadId=275051

  Please post some feedback after you try the workaround solution posted here.
  It looks like a registry key must be changed.

  Good luck

• Information on "Company name" missing when building one. EXE

  Hello all, sometimes in the past weeks, something has gone wrong in my installation of CVI 2009 SP1 and now the name of the company information is missing when creating the executable

  I have an application created in the beginning ot April it is correctly showing this element in the properties of the file, but when I opened the project now and watch in Build > Target Settings > substitutions of Panel and preview Version Info the name of the company is missing even if '% company' is present on the ground.

  I tried to change the registry manually according to this thread (9.1 subkey) without success: missing company and username as well as the number of series, but even if manually add the name of the company is still missing from the Panel of configuration target and in the same executable file after restart of the CVI and PC.

  I also tried to change manually the .prj file and after this file deletion of cvibuild and files .cws and _dbg, always without success

  IE that the CVI and compiled executable work correctly: it is not a question of errors or unexpected behavior, i's just a question about the management of versions correctly our work (and the fear that this situation hides a more serious problem )

  What may have happened and how can I correct this situation?

  Hello Roberto,

  In regards to workaround you've tried, referring to the other forum thread, in CVI 2009 this information are kept is no longer in the registry. For reasons related to the UAC, it has been moved to a file. By default, this file is located in the following location:

  XP:  C:\Documents and Settings\All Users\Application Data\National Instruments\CVI2009\bin\userinfo.ini

  Vista/7: C:\ProgramData\National Instruments\CVI2009\bin\userinfo.ini

  Make sure that the file exists, and that there a [RECORDING] section, with a "CompanyName" label that it contains.

  If it does not exist, also check your startup screen to see if the name of the company appears in the top/left corner.

  Finally, if instead of % company, you type an arbitrary string of characters for the company in the Version information dialog box, this string appears also in the "overview of the substitutions" mode, and it makes the executable you build?

  Luis

• my laptop repeat myself that ststring.dll is missing when I turn it on

  my laptop keeps saying that ststring.dll is missing when I turn it on what should I please

  Hi gaynoredwards,

  1. what operating system is installed on your computer?

  2. don't you make changes on the computer before this problem?

  The ststring.dll file is associated with the secure Dell Data Backup Local software.

  You can set up your computer in a clean boot state, and check if the problem persists. It will start Windows by using a minimal set of drivers and startup programs and helps eliminate software conflicts.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7: http://support.microsoft.com/kb/929135

  Hope the helps of information.
  Please post back and we do know.

• Missing dll file USBSTOR.sys ksuser.dll

  Dll file missing original title-

  I'm missing dll file ksuser.dll USBSTOR.sys can someone help me get it back?  I am running WIN XP Media Center 2002 SP3 and IE 8.0. I think I deleted it by accident when I uninstalled Tune Up Utilities.  Because of this missing file, I can't apply. Thank you.

  Fingers crossed X X

• Missing important files after migration to Windows Live Mail from Outlook Express 6.

  Original title: Windows Live Mail.

  I changed my email to Windows live from Outlook Express 6. All good transered but all my important files disappeared after a week. Is it possible I can get themback?

  Hello

  What is missing important files to Windows Live?

  When you face the issue in Windows Live Mail, I recommend that you post your question in Windows Live email support for assistance.

  Hope the helps of information.

• Missing DLL file keeps Getting Past journal. How can I restore file?

  After trying in vain to my Dell Dimension 4550 under Windows XP SP3 with Dell Studio XPS running Windows7 HomePrem network, I downloaded a file recommended by Microsoft which would "solve" the problem. At the beginning I was unable to execute the file downloaded and kept receiving the message «you don't have permission to update Windows XP.» Please contact your system administrator. "Unfortunately, I am the administrator: o (...) After correcting the problem of 'permission', I tried once more to run the fix MS (WindowsXP-KB922120-v5 - x 86 - ENU.exe). The error message following, that I received was missing "Systems32\rundll32.exe". I tried to re - start the system with the disk OS (even changed the configuration of the system so that the CD player is the only boot drive. No go. Finally, the system charged up to the Welcome screen with my username (which is the ONLY user name and no password). When I clicked on the icon for my use, the office briefly appeared, then returns to the Welcome screen with my name of user/icon. The only other available command turns off the system.

  Since I have no way to load the missing/s file to the computer (or I'm not aware of the procedure), can someone please help me with this problem.

  Hello and welcome on Microsoft Answers. First of all, I think that your computer may be infected with malware. Rundll32 is a windows core system file required to run applications, but is not necessary for windows startup and so shouldn't stop your desktop computer to load.  I recommend that you restart your computer in safe mode with network. When you are prompted to choose an account to connect to choose your personal account. Download, update and perform a quick scan with Malwarebytes. Display the results of the analysis, and we'll go from there.

  How to start in safe mode

  Malwarebytes.org

  How to use Malwarebytes

• How to fix the "missing PDFMaker files"?

  I use Adobe Acrobat Pro XI (Version 11.0.17) and Microsoft Office 2013 (Version 15.4849.1000). When I click on "Create a form" in Acrobat and select the Excel (*.xlsx) file to convert, and then display the message box says "missing PDFMaker files". I was trying to reinstall the Acrobat, but still show the problem. Help, please.

  Hi tangk11675327,

  Please see this KB doc for help: unavailability of difficulty PDFMaker in MS Office

  We also indicate the operating system installed on your system.

  Kind regards

  Meenakshi

• When file/collection, how can I delete all the related items that are not on my last composition?

  Hello, I have a great difficulty using the file/collection a large file I did months ago, because when I use it, the file is created, but it takes 2.5 to space! compared to others of my works, taking almost 1 TB of files, this one is too big and I think by deleting some files, but I don't want to make a mistake, so I wanted to ask here, if it is possible to take a main composition and only do a file/collection of this composition, objects and elements that serve there (the last I made on my account at least, with the elements used on that, because I think that there are many (if not a large part of them) files and elements that are not used in the final version, as scenes of the version beta of my work, the problem is the composition is too long and have a lot of different archives or drop movies then it could take forever to do it manually...

  Thanks for reading me! I hope that this is a solution...

  It's a two-step process:

  1. reduce your project to the desired composition.

  2 recover your files.

• CS3 Error Msg: missing PDFMaker files...

  Hello

  I installed CS3 and when I tried to use Acrobat Pro I got the following error message:

  "Missing PDFMaker files.  You want to run in repair mode? »

  If I say 'yes' nothing happens.  If I say 'no' nothing happens.  What can I do to use my software?

  Thanks in advance for any ideas!

  Kathy

  According to Bill, you can print to PDF using the Adobe PDF printer. No "interactive" features with it. The content of the page that was just painted to the PDF document.

  Alternatively, with Office 2010, try the ability to save in PDF format.

  If you wish to use PDFMaker you more replace it to Acrobat X. 3.1.0 update.

  Acrobat X (3.1.0) PDFMaker supports 64-bit Office 2010.

  See: See: http://kb2.adobe.com/cps/333/333504.html

  n.b. Don't know, but it can be any problems with the integration of Acrobat X (as appropriate) with other CS3 applications.

  You do not want to ask about it in the CS forums.

  Be well...

  Post edited by: CtDave