Mode deteriorating Stamina

Similar Questions

• Light LED Notofication won't notify after viewing notifications from the lockscreen he

  Sony Hi community,

  There are already a lot of questions posted here, but so far, I missed only the mode of stamina and endurance Ultra mode from the previous version. My device is running the latest put updated sw (23.5.A.0.575). A few things, however, I have noticed is that the blow from the camera of the lock screen doesn't always. But what is a little more boring is now light LED notifications.

  Before the update (Lollipop), when notifications to, the LED flashes. I can view notifications of the lockscreen by double clicking on the screen. Without unlocking the phone, and when the screen turns off, the notification lights up and blinks again. But atfter update Marshmallow, notifications are seen from the lockscreen without unlocking the phone when the screen turns off, the LEDs blink is no longer. maybe Sony has changed? I do not know.

  Kind regards

  kiko66613

  In my opinion, this is how it should work. You saw the notifications, they are considered as seen. New notifications will be LED flash again to know that there is more to check.

• Data connection keeps disappearing in Stamina mode

  I'm in the United Kingdom on the three network. I use Stamina mode with extended use enabled to save energy, but I see a consistent question when, after an hour or two, the phone completely loses his mobile data connection and does not restore without having to reboot. This makes Stamina mode completely useless because is not reconnected when the screen is turned on.

  The signal on the phone indicator shows no symbol 'H' when this happens, even a few-> status means HSPA is present but are disconnected mobile data.

  I have the latest firmware installed.

  Try resetting the endurance like this: first of all turn off, after which go to controller settings-applications-all-eco mode, forcing clear data and stops. Restart your device and check again.

• Stamina mode

  Whenever I put on her stamina mode does not work and is not disable the stream please notify

  If the data is not disabled after 15 minutes (after endurance comes into play), you should try this: first of all, make sure it is off, then go to settings-apps-all, do scroll down to stamina. Force shutdown, and erase the data. Restart your device.

  Also, see this:

  https://talk.sonymobile.com/T5/Xperia-Z3-Z3-dual/problem-of-mobile-data-in-stamina-mode/m-p/942095#M...

• Endomondo prevents STAMINA mode

  Maybe this question was asked before:

  I have this app to track I want to use to track my long hikes in the mountains. The phone is in airplane mode to prevent it from constantly in search for the cell towers. I have the ENDURANCE mode and also added this app (Endomondo) to the white list in the settings of the ENDURANCE. The application uses the GPS + WiFi to get the location.

  However, the phone keeps complaining that this application prevents it to STAMINA mode. I am running the latest FW.

  How can this be repaired?

  Prevent certain applications, depending on how they work, ENDURANCE and work when this happens, you will get this message with information about the app which are the cause.

  I don't know the exact reason but on our site for developers, our developer team has posted some tips for application developers on how to reduce the battery consumption and make applications more optimised for ENDURANCE: http://developer.sonymobile.com/2013/04/04/5-coding-tips-to-make-your-app-power-efficient-and-optimi...

• Stamina, my Xperia mode

  Hello

  I have a M4 Aqua.

  I have the endurance and my Experia (phone tracking) mode together.

  Because stamina mode disables network connections when the screen is off, My Experia mode will not work and the phone cannot be located if lost.

  Under the Stamina mode menu, there is an option to allow certain applications to stay connected. I don't see my Experia in this list. Is there anyway to get my Experia works when Stamina mode?

  Thank you.

  @billford Are you running 5.1.1? If you add applications, you should see all the other tab. My xperia is available.

• Mobile data in stamina mode problem

  Hi all

  Mobile data continue to work, when I chose in endurance mode. It works even if extended stanby was chosen. mobile data won't stay out of this mode. How can I solve this problem?

  Not: Active applications in stanby is empty.

  My problem has been resolved: mobile data was closed in 15 minutes after I closed keylock

  Stamina mode will kick after 15 minutes. Mobile data remain even after that time? It should allow when you wake up to the device.

• Controller Eco Mode = Mode Stamina?

  Hi guys! I have a question, at KitKat we controller in Eco Mode, but since the update of the lollipop, it is absent in the apps, but I noticed the app in Stamina mode? And can I restart Mode endurance through this application then?

  @NirmalSitaldin98 Yes, on some markets, it is still controller in eco mode, but as far as I know, it's the stamina now.

• Failure with stamina mode after upgrading to android lollipop

  Hello

  I have a failure with the endurance mode after upgrade to android lollipop

  My wifi connections and mobile data are still active and which reduces the life of my battery

  How can I solve this problem? Should I reinstall android kitkat?

  Thank you

  You can try this: first turn off the endurance, after go settings-applications-all, scroll to endurance app and force clear data, and stop. Turn it back on.

• Xperia Z2: Stamina mode does not aparently

  Hello

  Endurance mode does not work on my phone aparently. I have try all configurations, but the sotware disable wifi and mobile data operator when I block, or turn off the camera screen. I continue to receive information from applications and I did not any exception on the configuration of the endurance. Any idea to solve this problem?

  Hello.. To do this
  Go to settings
  Apps-> all-> the controller in eco mode
  And empty the cache and data... Before you click on stop and restart your phone... It should work

• 'Power saver' mode battery life has suddenly deteriorated.

  Hi - I'm running Windows Vista Home Premium SP2 32-bit on a laptop Toshiba (plug here).  The laptop is a little less than 2 years old and is in constant daily use.

  My battery life got suddenly shorter.  I know this because of my job (I'm a student, and I'm taking notes for the office of disabled people in my uni, so I have to carry my laptop to all my classes and taking notes).  I often have to run my laptop without being able to connect, as some halls are not equipped for it.  Accordingly, I am very tuned to what I can out of my battery.  Before Christmas, with the power saving mode and the brightness of the screen turned down as down as possible and unnecessary services and programs all does not, I could get about 1 hour and 45 minutes out of the laptop, give or take.  But now, 4 weeks later (beginning of the College's new mandate) I can barely get out of 50 minutes with the same settings.
  I understand that the battery life decreases with age.  However, it is a very sharp and makes me think it's abnormal.
  I would also like to point out that when I move the mouse over the battery meter, there is a distress message / (yellow triangle with "!" inside) under where it says "the current power Plan: energy saving»  The message said: "your current plan may reduce system performance."
  I'm fairly certain that this message never used to be there.  In addition, on the 'High Performance' and 'Balanced' it doesn't have this message!
  I changed the power options advanced to answer me.  But I have reset default values on all levels of electrical energy, in "Change Plan settings" in the "Power Options", but it did not help.
  I just reset the power management using the command line (powercfg - restoredefaultschemes), which got rid of my other projects to be able to staff.  I was not able to check if it worked yet - I'll do it later - but I am not optimistic because this warning message is still there.  
  
  
  One last thing: when it is plugged in, that it charges 99%, not 100% as it was!  It is said, "connected - not load."  Can be linked.
  
  
  Any ideas?  This is a major drawback for me because I depend on to get out 2 conferences out of my battery!
  
  
  PS the display brightness is at the very least, and I can't see new programs or processes that are not running before.   In the past few weeks I did a CC registry clean for the first time.
  
  

  The battery probably affects at its end of life... If you have any calibration tool in your bios that run... If this is not the case, a complete emptying and full load may help... Jared Gray - checked CrossLoop Helper - www.crossloop.com/jaredgray

• Pavilion x 360: computer laptop x 360 power mains or battery mode?

  Hi guys,.

  My question is to work on my pluged Pavilion x 360 with mains or battery.

  I read about this lately and I'm confused, I'll try to explain my dilemma!

  -Works on battery increse the number of cycles of the battery and it degraded.

  -Work with alternating current also degraded the battery because force him to be always 100%

  Which one to choose? I mean if I have to live with a natural degradation of my battery deteriorating more? Mains or battery power mode?

  Thank you

  Hello

  You are more than welcome

  All the best,

  DP - K

• Satellite M50 does not start, go back to the screen with different start modes

  My Satellite M50-130 does not start correctly. When you turn it on, it goes to a black DOS screen, saying: "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. "It offers me different start modes: Safe Mode, with networking and command prompt. Last good Configuration known; and start Windows normally.

  I tried all the 5 options, gets the commissioning insofar as the Toshiba screen, but then with all the options, it returns to the initial screen offering the 5 modes of starting. Same thing happens when laptop works again.

  The only recent software change, I've done was an update to Norton AntiVirus/Internet Security and I suspect that Norton is at least part of my problem, see history below. I know it's the Toshiba support site, but I tried Norton so many times without success, I gave up. Plus, I'm no expert at all, so I can't be sure that it is really the source of all my sorrows. All advice welcome!

  The performance of my laptop has deteriorated seriously in the last two months. She is extremely slow, and cleaning of malware and unwanted General does not help. It began right after that I renewed the license of Norton last year and upgraded to the 2007 version. The worst downturns are always connected to direct upcoming Norton upgrade programs. I disabled the live upgrade, but programs always come to the top, and I can't stop them, a popup tells me that they are protected.

  Wireless internet is also very capricious, even if another computer on the same network works fine.
  During the last week, I had to relax a little internet security settings (from "moderate to severe" to "low to medium") because after an other update of Norton AntiVirus, I couldn't access to interactive Web sites.
  It is perhaps a coincidence because Norton AntiVirus comes with updates at least twice a week - but what else could be the problem?

  My apologies for the long rant, I am grateful for all the advice!
  Thank you
  I have.

  Hello

  I think the only way to make your system works correctly again is to restore with the cdrom of onboard catering. Simply manage to save your data from your hard drive (the best way would be to put your machine's HARD drive in a USB - HDD enclosure and copy important data on another computer), then wipe the system completely off you hdd.

  After that, the system must run again...

  Welcome them

• Notifications not working when phone Mode standby

  Hello

  I took delivery of my Z3 Compact last month, and overall it is very good. This is completely standard, out-of-the-box, with no apps that affect the system.

  I found a very annoying problem with the Notifications sound when the phone is in mode 'sleep', IE the screen completely black, either due to the function of time-out or when I press the round power button.

  The problem is that no notification not crossed; If I'm expecting an email from work, I constantly to wake up the phone and as soon as the lock screen appears, then do the notifications.

  How can I get the phone to always send a notification sound, even in mode 'sleep'.

  Thank you

  Hello and welcome to the community! Since you are new, please make sure that you have checked our Forum.

  It seems that you have activated the STAMINA mode in your phone via the settings > power management > STAMINA mode. You can add apps to stay active in mode if you go to settings > Power management > STAMINA Tap mode > active Apps in mode standby.

• Get error 'endurance Mode affects lifelog.

  Every so often, I receive the notification: 'STAMINA mode affects Lifelog' and 'Add Lifelog as an application active standby mode'.

  I added to the list of apps to stay active ENDURANCE Lifelog. I removed and re - he added. I rebooted between steps. It appears still after a few days.

  We fixed this issue in the latest version of Lifelog, 2.9.A.0.28, so if you upgraded to this version of the game to Google you should not see the question once again.