Controller Eco Mode = Mode Stamina?

Similar Questions

• Eco Mode went controller

  Hello

  I just got my Z3c back after sending it for repair (camera problem) and noticed that now that miss me the 'controller in eco mode' option under settings, apps, all. It's annoying because I have a few apps that seems to work when the phone is in mode 'sleep' (Whatsapp Blackberry Msger etc.). Is it possible to recover the eco mode option?

  Thank you

  V3RGY

  The app is well known in the latest firmware so it is normal that you don't see more under settings--> Apps--> all.

  If I remember correctly, he called stamina Mode now.

• Windows 7 - Eco Mode

  I just bought a new toshiba A500 with windows 7 already on it, and the Eco button does not work on it? Actually there is no power for the 'eco mode' plan at all. Is something wrong with my computer missing this driver or not windows 7 everything simply can't?

  Hi Craig
  Just thought that I'll let you know that I have an A500-17 X under Windows 7 (64 Bit)
  and it comes pre installed with the Eco Power Management in power management
  Mark

• Qosmio X 875 - ECO mode does not work immediately after Win 8 upgrade

  I used the upgrade Toshiba Upgrade Wizard to Win 8. He succeeded well uninstall the incompatible software before the upgrade and install the new Toshiba and driver versions after the upgrade.

  I activated the ECO mode, and to my surprise, it does not work as before (in Windows 7):

  * Now, it works with the brightness to level 1 *... very dark. Before, ECO mode allowed me to go up to level 4 and was always considered in Eco mode...

  If I increase the brightness, the 'eco mode is disabled' message opens immediately.

  How to contact Toshiba to inform them of this problem and the other problem I found with the new BIOS?

  BTW, I am owner of a Qosmio X 875

  Post edited by: qosmitto

  > How to contact Toshiba to inform them of this problem and the other problem I found with the new BIOS?
  Contact your Toshiba authorized service provider in your country.

  Read this:
  + What is the TOSHIBA eco Utility? +
  http://APS2.toshiba-tro.de/KB0/FAQ2503AT0000R01.htm

  > It changes the brightness of the display of level 4, changes the brightness of the grey screen of level 1 (* 4),.
  _The * 4 means only on models with Windows7 installed _

  I guess that the previous configuration was only Win 7.

  8 win was made for mobile (use of the Tablet), the energy consumption of battery is also very important plant help to win 8. The consumption of the battery must be taken at the lowest level possible.
  So I guess that now help win 8 ECO medium mode and save the power max and long battery life time working at a max level.

• Satellite A500 - software jump issue and eco mode key does not work

  Hi all you guys :)
  I read many forums these days, and my problem is still there.

  I did an update provided with records of 2 updates for Toshiba (Windows 7 on a disk and drivers updated to this OS in the other disk) and the first 2 weeks, everything was ok. Then stopped working the windows media player jump list. The jump of live messenger never worked but good list. I didn't have the will to uninstall them, clean and reinstall. It was just the messenger.

  After media player jumplist that I started looking on the Internet, but nothing has worked, sfc scannow, the antivirus is mse, and I never changed anything. After that, also started to pop-up Windows defender turned off at startup and then also stopped workin the eco mode selection button and the button display to open mediaplayer.
  What can I do?

  I also updated the BIOS and I have the latest Windows.

  Sorry for the long post ;)
  Thanks to all in advance!
  cyaaao!

  Hi mate

  I'm not very well if this problem could be related to an error in Win 7 m.
  But everything looks like it could be the case

  In my case the jumplist will appear when I do a right-click on the IE icon or the Windows Media icon placed in the taskbar on the left side.

  I searched a bit a found this MS Jumplist page and how to handle this:
  http://Windows.Microsoft.com/en-us/Windows7/using-jump-lists-to-open-programs-and-items

  Maybe this could be useful for managing the jumplist.

• ECO mode and media buttons not working not not on my Satellite A665-S5173

  I bought a Toshiba satellite A665 is about 2 weeks ago and my eco mode and media buttons along the top of the keyboard do not work. The volume buttons work fine. I tried the reboot and restore default in BIOS with no luck.

  Any suggestions? His new brand really, I don't want to go through the trouble to return

  Hello

  The illuminated buttons are controlled by added value package.
  Did you remove this tool from Toshiba or install another OS?

  In any case, you should try to (re) install. Official website of Toshiba you can download:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• Satellite P750 - Eco mode automatically

  Hey guys!

  So, I use this model for a while, and I can't say something bad to her.

  What I recently started the experience is the following and it repeats every time when on.

  First of all, when I turn on the machine, Toshiba Buletin Board appears. I thought it was because it is right next to the gas station, there is an alert icon.

  I clik above, go back and alert fires.
  I thought it's because I didn't created backup, but that good, I never had.

  That, when I leave the laptop for a few minutes, and when he should light, it activates ecomode himself (beeps hot keys), and if I leave after that, when it is about to turn out to fall asleep, she often starts a beep and flashes quick access key for volumizing upward. In this situation, it often turns off the coast of the wireless adapter.

  Thank you
  FF

  With regard to the Eco Mode.
  This mode is controlled by preinstalled Toshiba Eco Utility and it slightly decreases the performance of certain devices to reduce electric energy consumption

  Please consult this documentation from Toshiba
  https://APS2.toshiba-tro.de/KB0/FAQ2503AT0000R01.htm

  Click on the help button to get more details on this tool.

  By the way: Toshiba Bulletin Board starts automatically when you start. To avoid this, you can disable this service in the msconfig. In run, type msconfig. Click on the Start button and uncheck the entry of Bulletin Board. Save the changes and reboot.

• HP Laserjet P1102W: I chose the eco mode (less ink) for a print job. Now, default printer for this. How to cancel?

  I chose the eco mode (less ink) for a print job.  Since then that a default printer and some programs (for example, picasa) allow me to choose normal print mode I often forget to choose normal.  How can I definitively cancel eco or printer back to the original setting?  Printer works wirelessly.  Thank you.

  In Windows 7, click Start, devices and printers, right click on the Laserjet P1102w, select Printing Preferences.  Select the desired default values, apply, OK.

• What is laptop computer on my new eco mode

  When I turn on the pc in the task bar, he said eco mode. What is it

  If you have a Toshiba laptop computer, see the following article:

  Toshiba Eco Utility: keep your green laptop
  https://www.toshibalife.com/laptops/Toshiba-eco-utility-keeping-your-laptop-Green

• Tecra R840 stop energy eco-mode

  I use a Toshiba R840 with Windows 7 64 bit. Recently, I am facing a problem with the laptop stops down while it is on the eco power mode. Suddenly the FAN will begin to run at maximum speed and the mouse cursor gets stuck after computer power laptop 15 seconds?

  Hello

  Perhaps a process crashes somewhere in the background and jams to the CPU that causes higher heat dissipation. This could lead to a higher temperature and over-temperature protection stops the laptop to prevent overheating of the material.

  Not sure why this happens, but maybe you need to reinstall the eco utility that you find on the European driver Toshiba page.

  I hope that this could contribute to...

• Data connection keeps disappearing in Stamina mode

  I'm in the United Kingdom on the three network. I use Stamina mode with extended use enabled to save energy, but I see a consistent question when, after an hour or two, the phone completely loses his mobile data connection and does not restore without having to reboot. This makes Stamina mode completely useless because is not reconnected when the screen is turned on.

  The signal on the phone indicator shows no symbol 'H' when this happens, even a few-> status means HSPA is present but are disconnected mobile data.

  I have the latest firmware installed.

  Try resetting the endurance like this: first of all turn off, after which go to controller settings-applications-all-eco mode, forcing clear data and stops. Restart your device and check again.

• Xperia Z2: Stamina mode does not aparently

  Hello

  Endurance mode does not work on my phone aparently. I have try all configurations, but the sotware disable wifi and mobile data operator when I block, or turn off the camera screen. I continue to receive information from applications and I did not any exception on the configuration of the endurance. Any idea to solve this problem?

  Hello.. To do this
  Go to settings
  Apps-> all-> the controller in eco mode
  And empty the cache and data... Before you click on stop and restart your phone... It should work

• ECO Charge mode can not be disabled on Satellite P50 - A under Win 10

  I had Windows 8.1 on my P50 - A Satellite.

  With the eco-utility, I activated the eco charge mode and my charges one battery at 80%. A month ago, I've upgraded to Windows 10, threshold 2
  Now I need my laptop often for mobile use and I need the full 100% of battery.

  But the Eco Utility no longer works.
  I downloaded the latest version of the utility eco for Windows 10 drivers Toshiba support.

  It works but there is no mode of environmental load! It still seems that on windows 8.1 but Eco charge mode is missing.
  Has anyone have the same problem?

  Any sugggestions to solve?

  Thanks in advance for your efforts

  I had Windows 8.1 on my P50 - A Satellite.
  With the eco-utility, I activated the eco charge mode and my charges one battery at 80%. So good.

  But then, a month ago I have upgraded to Windows 10.
  Now I need my laptop often for mobile use and I need the full 100% of battery, so I tried to load eco mode off.
  But the Eco Utility no longer works.
  I downloaded the latest version of the utility eco for Windows 10 drivers Toshiba support.

  It works but there is no mode of environmental load! It still seems that on windows 8.1 but Eco charge mode is missing.
  Has anyone have the same problem?

  Any sugggestions to solve?

  Thanks in advance for your efforts

• Endurance of weird mode?

  This morning, when I unplugged my phone that had nothing of the night, stamina mode showed me only 20 hours, while I could see up to 2 days on a few screenshots. My battery drains faster than that, but hey it's boring if I trust this estimate. Anyone has the same problem and he managed to fix.

  Reset endurance like this:

  1. disable endurance mode.

  2. go to controller settings-applications-all-eco mode, force stop and erase the data.

  3 reboot the device.

• HARD drive in PIO mode - very slow

  Anyone else have a HD Sentinel message - or another HARD drive test, that HARD is only in PIO mode, not in Ultra DMA? It's really slow.
  It can be verified, my computer - property - materials - IDE ATA/ATAPI - IDE elementary or secondary school - property - Special - if the watch - PIO transfer mode you have the same problem.
  If Ultra DMA 1-5, you have no problem.

  If anyone has a solution, please report it. Thank you.

  When the primary IDE controller is set to PIO mode, the audio may be distorted or the system can boot and run slowly. To resolve this issue, reinstall the primary IDE channel device driver. Primary IDE controller transfer mode will reset to default DMA.