Model of error in MDB

Similar Questions

• 4.6 HP Device Manager: HPDM 4.6 Get models list error

  So, after the long weekend, we tried to connect to HPDM 4.6 and it gives us an error when loading. "Models Get list error could not execute query." This happens twice, and when you enter HPDM models are all gone. Other machines that is remained connected to the course of the weekend still work correctly.

  Newspapers in next post

  Tahnks for all help!

  We were then able to understand that the disc of the tmpdb rights to was full. We had switch to another server and began to shrink. Everything seems to work now.

• Simulation of the model ARX - error-41263

  Hello

  I'm trying to simulate an ARX model using the pallet identification system. I do not write too much about my problems when a VI can explain everything - so that's it, attached "Model Simulation.vi" works well, while the 'model of Simulation PtByPt.vi' gives me the error 41263 (System of Identification Toolset: System Identification Toolkit impossible to recover the data in the system model because the model type wire you in is incompatible with the requirements of the model system).

  Can someone tell me what I am doing wrong?

  Just for reference: he was once the similar topic, but unfortunately it did not provide all the answers to all: http://forums.ni.com/t5/LabVIEW/system-identification-error-41263/td-p/886077 .

  Hello

  In my view, this error occurs because the model of Simulation Ptbypt VI provides a State space model rather an ARX.

  I tested with the model of the State space and it works very well.

  Kind regards

  Ion R.

• OfficeJet 7500 E910 model: 0x61011bed error code

  0x6011bed error code is displayed once the printer performs an impression and to enable again the printer requires a lot of button pushes on the display of messages of 'OK '.

  I have turned off the Officejet 7500, disconnected from the power, waited a minute, deleted and reinstalled ink tanks and the print head, sucked and bluff visible dust but still cannot make the mistake go away for very long, with usually error code return after printing (print or receipt of a fax).

  I perform the extra step or need of cleanup for more than just a job printing after the error code clears?

  An additional observation: If the print job is multiple pages, once started the Officejet 7500 completes the task, but is to begin after the error code displayed is the problem.

  Hey @pauledinger,

  Thanks for getting back to me on this subject.

  Because you also get a paper jam error, you can click here to access the paper jam good troubleshooting steps. Once the support document opens just review the Solutions proposed to ensure that no paper or debris is hidden in paper path in your product. Support document also guides you through the rollers for the cleaning of the printer. Regarding a paper sensor, you can not clean the sensor itself. In addition, if the sensor is defective, it is a non-replaceable part on this model of consumption of the product. Therefore, a replacement of the entire unit would be necessary.

  After the jam troubleshooting steps, please try printing. If the error persists, can please click you here to send last programming Firmware update to your printer. The Firmware is the "brain" of your printer and control that made your printer and how your printer it. If there is a corruption in the internal programming in your printer, it can cause performance problems. Your printer must be in a State of 'ready' to 'send' to update the Firmware of the product. If your printer indicates a status of error on the Panel until the firmware update will most likely fail. Once the firmware update completed test print to see if the problem has been resolved.

  If the error state persists after checking for jams and completing the update of the Firmware a replacement of the entire unit would be the next step.

  Please let me know if the troubleshooting steps I've provided resolve this error state. Good luck!

• Spice for model NDC7001C error

  Hello

  I get the following error when I run the simulation "SpiceModelSims" (attached). Could there be a problem in the spice itself model file?

  -Checking for SpiceModelSims SPICE netlist - Wednesday, March 21, 2012, 11:37:48 -
  Error of SPICE Netlist in schematic RefDes 'u3' element 'xu3': unexpected '0' found subckt - too many nodes or missing name value parameter instance online.
  Error of SPICE Netlist in schematic RefDes 'u3' element '': due to errors, the instance subckt "xu3" has been omitted from the simulation
  = SPICE Netlist verification completed, 2 error (s), 0 warning (s) =.

  Thanks, any help would be appreciated!

  Hi Angela,.

  The model you used has two separate models, a P and a model N MOS.  As you put the two models within a symbol, it will cause a problem of simulation.  To resolve this problem, you must change the syntax so that two models of MOS are called in a single model, the syntax should look like this:

  .subckt NDC7001 DN GN SN DP GP SP
  XQN DN GN SN SN NDC7001CQ1
  XQP DP GP SP SP NDC7001CQ2

  . Copy your template after the top line

  ..

  ..

  .ends

  The attachment is the model with the changes I made.  When you change your model, check out the tutorial of creation of component from the link below.  Step 7 explains the relationship between the model subckt statement the symbol in Multisim.

  http://zone.NI.com/DevZone/CDA/tut/p/ID/3173

• Model translation error specify a valid target language territory

  Hi team,
  
  I'm translating my model of the English to the French language.
  
  
  I am trying to download my file .xlf but it gives me the error below.
  
  The translation file downloaded is not valid. It must specify a valid target language and territory. Please check that the file is in the correct format.
  
  I'm working on Oracle EBS 11i.
  
  Can someone help me how to overcome this problem.
  
  Kind regards
  Ajay
  
  Published by: Ajay on January 7, 2013 05:44

  Hi Ajay,
  You can try the options below.

  -Set up of utf-8 (iso-99) /(ISO-8859-1)? at the top of the translation file, you can open in wordpad or something else.
  -Change the value of 'CH' to 'EN'

  I would like to know the result of pls.

• Trouble with Check-Out (recording - Buy) model - Dungeon, error message!

  Hello!

  Hope somone can help me with this. I struggled for a while and needs to get this finished. I use BC ecommerce and standard PayPal. I created my point, models, etc. I have tested the function and can spend up to the Fund. When I try at the cash register, I get an error message that says:

  "ERROR: you have removed your web form." Please log on to the administration panel of your Web site and remove the form previously submitted from the page web that you last visit. You have to re-create this web form by going to the Modules-> Web Forms. "After you re-create simply insert this new web form on the web page and your web form should work properly."

  I edited the recording - buy model to include only PayPal as payment method (but I do not see how this form of functions).

  I followed the instructions on the site of kb to implement the standard PP (PDT token and all that) and that created in the section of the bridge.

  I can access the item, add it to the basket, get to the cart, checkout button which takes me to the page of payment, but then blocked.

  I'd appreciate any help that you can offer as I'm late on this now. Thank you

  The form itself in terms of data and the use lies in the area of web forms. The HTML to place you in the layout to buy registration.

  You have changed the form of way that BC can't find that form in the system, normally if you have changed the shape of many and things as the ID of the form in action do not equate good shape in web forms.

  You should check on this and also to ensure that all of the fields that you added in the layout to buy entry the web form itself in the admin.

• HELP needed on 'Advanced Photo Album' Flash CS5 model Io-error: url not found

  Hello people!

  I had a problem on my slide show I did with the "Advanced Photo Album" model. This problem is not new, I found a thread here with similar problems, but it did not help me. I had the same code as the people in the other forum, but my problem is not the download problem. but I can't even see the images when I test the movie. The rest works fine, it shows the titles of the image on the right, and in fact "slides". The only problem is I get the error:

  #2044 error: ioError unverarbeitet. Text = Error #2035: Die URL wurde nicht found. URL: file:///C|/Users/User/Desktop/FenzBildergalerie/image1.JPG

  (for those who don't speak German: it is said: IO error not handled. text = Error #2035:Url not found.)

  I followed this tutorial here and did everything in exactly the same way.

  all my images are named image1.jpg and so forth and are all in the same folder as the .swf and .fla here files:

  

  AND: I followed the advice of the other forum:

  "To ensure that the images are in the same location as the swf file, does not matter the fla file.  Also I suggest that you manually rename one of the images, rename the file name and extension.  My previous question to have to the hardcode the. JPG as all caps was weird because on my system, they presented as .jpg.  Again, I would renameing the first and second image with a manual .jpg typed in the name of the file, not only the code as3.

  PS also try to change the as3 of the 3rd and 4th image code in. JPG to see if that helps. »

  I have tried every single possibility in renamed:

  Image1.jpg

  Image1. JPG

  Image1. JPEG

  img1jpg

  img1. JPG

  It does not at all...

  still, it looks like this:

  

  
  Here is my code:

  Import fl.data.DataProvider;
  Import fl.events.ListEvent;
  Fl.transitions import. *;
  Fl.controls import. *;

  USER CONFIGURATION SETTINGS.
  var secondsDelay:Number = 5;
  var autoStart:Boolean = true;
  var transitionOn:Boolean = true; true, false
  var transitionType:String = "Fade"; Blinds, Fade, Fly, Iris, Photo, PixelDissolve, rotate, Squeeze, wipe, Zoom, random
  var hardcodedXML:String = "< photos > < image title ="View"> image1.jpg < / image > < image title ="Badesteg"> image2.jpg < / image > < image title ="Location"> image3.jpg < / image > < image title ="Kochecke"> image4.jpg < / image > < image title = 'Sofa' > image5.jpg < / image > < image title ="Garden"> image6.jpg < / image > < image title ="Liegebereich"> image7.jpg < / image > < image title ="Room"> image8.jpg < / image > < image" title = "Badekar" > image9.jpg < / image > < image title = "Bett" > image10.jpg < / image > < / photos > «;»
  THE END USER CONFIGURATION SETTINGS

  DECLARE VARIABLES AND OBJECTS.
  var imageList:XML = new XML();
  var currentImageID:Number = 0;
  var imageDP:DataProvider = new DataProvider();
  var slideshowTimer:Timer = new Timer ((secondsDelay*1000), 0);
  REPORT AS FINISHED

  HARDCODED FOR XML CODE =.
  imageList = XML (hardcodedXML);
  fl_parseImageXML (ImageList);
  END OF THE HARD-CODED XML

  EVENTS =.
  imageTiles.addEventListener (ListEvent.ITEM_CLICK, fl_tileClickHandler);
  function fl_tileClickHandler(evt:ListEvent):void
  {
  imageHolder.imageLoader.source = evt.item.source;
  currentImageID = evt.item.imgID;
  }
  playPauseToggle_mc.addEventListener (MouseEvent.CLICK, fl_togglePlayPause);
  function fl_togglePlayPause(evt:MouseEvent):void
  {
  If (playPauseToggle_mc.currentLabel is "play")
  {
  fl_startSlideShow();
  playPauseToggle_mc.gotoAndStop ("pause");
  }
  Else if (playPauseToggle_mc.currentLabel == "Paused")
  {
  fl_pauseSlideShow();
  playPauseToggle_mc.gotoAndStop ("play");
  }
  }
  next_btn.addEventListener (MouseEvent.CLICK, fl_nextButtonClick);
  prev_btn.addEventListener (MouseEvent.CLICK, fl_prevButtonClick);
  function fl_nextButtonClick(evt:MouseEvent):void
  {
  fl_nextSlide();
  }
  function fl_prevButtonClick(evt:MouseEvent):void
  {
  fl_prevSlide();
  }
  slideshowTimer.addEventListener (TimerEvent.TIMER, fl_slideShowNext);
  function fl_slideShowNext(evt:TimerEvent):void
  {
  fl_nextSlide();
  }
  EVENTS OF THE END

  FUNCTIONS AND LOGIC =.
  function fl_parseImageXML(imageXML:XML):void
  {
  var imagesNodes:XMLList = imageXML.children ();
  for (var i in imagesNodes)
  {
  var imgURL:String = imagesNodes [i];
  var imgTitle:String is imagesNodes [i] .attribute ("title");.
  imageDP.addItem ({label: imgTitle, source: imgURL, imgID:i});})
  }
  imageTiles.dataProvider = imageDP;
  imageHolder.imageLoader.source = imageDP.getItemAt (currentImageID) .source;
  title_txt. Text = imageDP.getItemAt (currentImageID) .label;
  }
  function fl_startSlideShow (): void
  {
  slideshowTimer.start ();
  }
  function fl_pauseSlideShow (): void
  {
  slideshowTimer.stop ();
  }
  function fl_nextSlide (): void
  {
  currentImageID ++;
  If (currentImageID > = imageDP.length)
  {
  currentImageID = 0;
  }
  if(transitionOn == true)
  {
  fl_doTransition();
  }
  imageHolder.imageLoader.source = imageDP.getItemAt (currentImageID) .source;
  title_txt. Text = imageDP.getItemAt (currentImageID) .label;
  }
  function fl_prevSlide (): void
  {
  -currentImageID;
  If (currentImageID < 0)
  {
  currentImageID = imageDP.length - 1;
  }
  if(transitionOn == true)
  {
  fl_doTransition();
  }
  imageHolder.imageLoader.source = imageDP.getItemAt (currentImageID) .source;
  title_txt. Text = imageDP.getItemAt (currentImageID) .label;
  }
  function fl_doTransition (): void
  {
  If (transitionType is "Blinds")
  {
  TransitionManager.start (imageHolder, {type: stores, direction: Transition.IN, duration: 0.25});
  } ElseIf (transitionType == 'Fade')
  {
  TransitionManager.start (imageHolder, {type: Fade, direction: Transition.IN, length: 0.25});
  } ElseIf (transitionType == 'Fly')
  {
  TransitionManager.start (imageHolder, {type: Fly, direction: Transition.IN, length: 0.25});
  } ElseIf (transitionType == "Iris")
  {
  TransitionManager.start (imageHolder, {type: Iris, direction: Transition.IN, duration: 0.25});
  } ElseIf (transitionType == 'Photo')
  {
  TransitionManager.start (imageHolder, {type: Photo, direction: Transition.IN, duration: 0.25});
  } ElseIf (transitionType == "PixelDissolve")
  {
  TransitionManager.start (imageHolder, {type: PixelDissolve, direction: Transition.IN, length: 0.25});
  } ElseIf (transitionType == "Rotate")
  {
  TransitionManager.start (imageHolder, {type: turn, direction: Transition.IN, length: 0.25});
  } ElseIf (transitionType == 'Squeeze')
  {
  TransitionManager.start (imageHolder, {type: Squeeze, direction: Transition.IN, length: 0.25});
  } ElseIf (transitionType == "Wipe")
  {
  TransitionManager.start (imageHolder, {type: wipe, direction: Transition.IN, length: 0.25});
  } ElseIf (transitionType == 'Zoom')
  {
  TransitionManager.start (imageHolder, {type: Zoom, direction: Transition.IN, duration: 0.25});
  } ElseIf (transitionType == "Random")
  {
  var randomNumber:Number = Math.round (Math.random () * 9) + 1;
  Switch (NombrAl) {}
  case 1:
  TransitionManager.start (imageHolder, {type: stores, direction: Transition.IN, duration: 0.25});
  break;
  case 2:
  TransitionManager.start (imageHolder, {type: Fade, direction: Transition.IN, length: 0.25});
  break;
  case 3:
  TransitionManager.start (imageHolder, {type: Fly, direction: Transition.IN, length: 0.25});
  break;
  case 4:
  TransitionManager.start (imageHolder, {type: Iris, direction: Transition.IN, duration: 0.25});
  break;
  case 5:
  TransitionManager.start (imageHolder, {type: Photo, direction: Transition.IN, duration: 0.25});
  break;
  case 6:
  TransitionManager.start (imageHolder, {type: PixelDissolve, direction: Transition.IN, length: 0.25});
  break;
  case 7:
  TransitionManager.start (imageHolder, {type: turn, direction: Transition.IN, length: 0.25});
  break;
  case 8:
  TransitionManager.start (imageHolder, {type: Squeeze, direction: Transition.IN, length: 0.25});
  break;
  case 9:
  TransitionManager.start (imageHolder, {type: wipe, direction: Transition.IN, length: 0.25});
  break;
  case 10:
  TransitionManager.start (imageHolder, {type: Zoom, direction: Transition.IN, duration: 0.25});
  break;
  }
  } else
  {
  trace ("error - transitionType not recognized");
  }
  }
  if(autostart == true)
  {
  fl_startSlideShow();
  playPauseToggle_mc.gotoAndStop ("pause");
  }
  END OF FUNCTIONS AND LOGIC

  I would really appreciate your help!

  Best regards, eva

  PS. I m of the Austria, if you prefer to speak German

  If this image you show first in the first display shows the folder of your images, then your code is not agree with the names of these images, and one of them be wrong will kick you get the error message...  ". JPG 'and '. JPEG"is not the same as".jpg ".  You should change all your image filenames to match with the code so that you have a consistent naming of your files.

  var hardcodedXML:String ="Image1.jpgImage2.jpgimage3.jpgimage4.jpgimage5.jpgimage6.jpgimage7.jpgimage8.jpgimage9.jpgimage10.jpg";

• With models syntax error

  I made a model... following a tutorial. When I make a new page based on this template, I get an error of syntax on line 10. The entire page is locked (uneditable) as is the area code. The code in the new page is identical to the model except for the addition of <! - InstanceEnd - > < / html > at the end of the code. The page will display very well on my system... And... If I uncheck the option "update page when the template is changed" new works of page doesn't have this error and it's completely editable and there no <! - InstanceEnd - > < / html > added at the end of the code.

  Then. what I am doing wrong?  CS4

  Heavens, let not a small obstacle away you from using models!

  Once you've conquered the models, you will have only to make changes at the level of the site ONCE, instead of 30 records of openness and change to infinity.

  Be brave, Ralph!

  In other words... do you want to be frustrated now (once) or EVERY time, you have to put the changes on ALL pages!

• Translator - ICERegions.htm &amp; SSI.htm of server model load error

  I've recently updated my installation of Adobe Dreamweaver CS4 (of Adobe CS4 Design Premium) using your automatic update feature.  About a day later, I was working in Mode APP DEVELOPER MORE and noticed that a few lines of text changed color in the document.  I changed the orientation of the view code and access these provisions of the code and noticed one unusual element "police" surrounding each of the updated text internal.

  Shortly after the change in focus to the designer pane a modal dialog box alert appeared with the following text:

  "The following translators were not loaded due to errors: ICERegions.htm: contains configuration information that his draw."  Server model SSI.htm: has configuration information that is invalid. ' (see image below)

  

  What does this mean error (I don't see no link with javascript).

  Brett

  PS-

  My system consists of the following:

  OS: Windows XP Professional

  Processor: Intel Core 2 Duo E8500, 3.16 GHz CPU

  Memory: 2048 MB

  I just wanted to let people know who may be affected by the same error that I also had this problem. To fix this try the following steps.

  1) close Dreamweaver CS4

  2) sail to:
  C:\Documents and Settings\ [UserName] \Application Data\Adobe\Dreamweaver CS4\ [language] \Configuration

  3) rename (I do not delete things just wrap I need later for some reason any):

  WinFileCache-[numbers] .dat to WinFileCache-[numbers] old.dat

  
  

  4) launch Dreamweaver CS4

  The issue has disappeared and are no longer due in 4 simple steps. She also started happening after a recent update.

  Happening throughout coding, when I loaded a file, and when I saved a file. I hope this helps someone, thank you for all the advice above me!

• MODEL. Error loading of FMB (FRM-18108)

  When I am trying to load the MODEL. FMB using the form builder, I get the following error...
  
  FRM-18108: unable to load the following items.
  
  Source Module: APPSTAND
  Source object: STANDARD_PC_AND_VA
  Source Module: APPSTAND
  Source object: STANDARD_TOOLBAR
  Source Module: APPSTAND
  Source object: STANDARD_CALENDAR
  
  And I got to know through google that I need to put
  
  FORMS60_PATH = $FORMS60_PATH: $AU_TOP/forms/US: $AU_TOP/resources. I don't really know where and how do. Can anyone help me in this regard asto how.
  
  Apps Version is 11.5.10. on WIN XP SP2...
  
  Thanks in advance

  Hello

  Please see these documents.

  Note: 236803.1 - TEMPLATE.fmb opening error in forms Builder
  Note: 130686.1 - how to generate the shape, library and Oracle applications Menu
  Note: 177610.1 - Oracle Forms in Applications FAQ

  Thank you
  Hussein

• Oracle SQL Developer Data Modeler start error

  Hi all
  
  I just downloaded Oracle SQL Developer Data Modeling (2.0.0.57.0) [released July 1, 2009] by selecting the option ' Oracle SQL Developer Data Modeler for Windows (this zip file contains the JRE).
  
  After that I installed the same and tried to start clicking on datamodeler.exe, I get the following error message
  
  "Failed to create an instance of the JVM on the path:... \jdk\jre\bin\client\jvm.dll.
  
  On the same machine, I can successfully run the SQL Oracle program without error. My machine is having Windows XP Professional SP3.
  
  Any ideas? If there is a problem with Java, that of the Oracle SQL Developer should also not run. But as I said it runs with any error, but the Oracle SQL Developer Data Modeler gives the above error.
  
  Kind regards
  
  JAA149

  Hey Jawad,

  you wrote you have 960 MB of RAM - how did you do a test with 1.5 MB of RAM and 2 MB of RAM?
  No doubt this is a problem of memory - memory change in the datamodeler.conf file option:
  -There 'AddVMOption-Xmx768M"by default; to take
  -"AddVMOption-Xmx512M" or never, making it suitable for your configuration - you can check the available free memory first.

  Philippe

• Special characters on Custom XSLT model cause error when printing PDF

  Hello

  Environment:

  • Request Express 4.2.5.00.08
  • Database 11g Enterprise Edition Release 11.2.0.4.0
  • WebLogic Server Version 10.3.6.0
  • REST (ADR) 2.0.10.289.08.09 Oracle data services
  • Altova StyleVision Enterprise Edition 2016 sp1 version

  I created a presentation of the State using Altova StyleVision and XSLT version 1.0. So that the model works, I had to manually remove several special characters in the generated .xslt file; some of them added automatically by the software (for example & #160; and & #x200B ;) and others were part of my model (p. ex. & amp;).)

  After producing a work plan, I decided to put back the original ampersand (&) I removed the template of the header which is a plain text:

  <xsl:text>A & B</xsl:text>
  
  

  However, I have tried many solutions I found on the web and all of them produce an invalid PDF. Here are some of the approaches that I tried and none of them worked:

  <xsl:text>A &amp; B</xsl:text>
  <xsl:text>A <![CDATA[&]]> B</xsl:text>
  <xsl:text disable-output-escaping="yes">A & B</xsl:text>
  <xsl:text>A &#38; B</xsl:text>
  
  

  Does anyone have an idea or a suggestion to solve this problem?

  Thank you

  Erick

  The APEX motor is making a number of substitutions with the layout of integrated report. Depending on how you generate your PDF documents - and I guess you try this via the printing API, you must perform some of them in your own code, try the following, hope it solves your problem:

  '%' => '%25'

  '<' ==""> ' % 26lt;

  ' > ' => ' % 26gt;

  '&' => ' % 26amp;

  Kind regards
  Marc

• Development of model Lightroom - error - Image looks like a negative

  When I open the develop module images look like a negative. I don't know what it would be.  Here is the image that is the best way to understand. I tried to uninstall and that has not changed anything.

  

  Go in Edition > Preferences > Performance and uncheck CPU graph use.

• Model creation of wsdl error

  Hello world
  
  I'm new user for JDeveloper, I use Oracle JDeveloper 11.1.1.2g to consume a web service deployed the repository for the integration of E-Business Suite.
  
  I have a WSDL for the service. I can see the wsdl document and I tested it in the SOAPUI also, WSDL works.
  
  However, when I create a new Web Service Proxy in JDeveloper, it presents us with the following error:
  ===============================================================================
  ##########################
  The title of the error:
  ##########################
  Validation failed
  
  ##########################
  Text of the error:
  ##########################
  
  oracle.jdeveloper.webservices.model.WebServiceException: error creating the model of wsdl "http://host.domain.com:port / webservices/plsql/SOAProvider/per_absence_record /? WSDL': org.apache.xerces.impl.xs.XMLSchemaLoader.loadGrammer (Lorg/apache/xerces/number/Analyzer/XMLInputSource ;) V
  
  ##########################
  Error stack:
  ##########################
  
  oracle.jdeveloper.webservices.model.WebServiceException: error creating the model of wsdl "http://host.domain.com:port / webservices/plsql/SOAProvider/per_absence_record /? WSDL': org.apache.xerces.impl.xs.XMLSchemaLoader.loadGrammar ([Lorg/apache/xerces/number/Analyzer/XMLInputSource ;) V
  at oracle.jdeveloper.webservices.model.java.JavaWebService.createPortTypes(JavaWebService.java:1635)
  at oracle.jdeveloper.webservices.model.WebService.createServiceFromWSDL(WebService.java:2846)
  at oracle.jdeveloper.webservices.model.WebService.createServiceFromWSDL(WebService.java:2611)
  to oracle.jdeveloper.webservices.model.java.JavaWebService. < init > (JavaWebService.java:509)
  to oracle.jdeveloper.webservices.model.java.JavaWebService. < init > (JavaWebService.java:461)
  to oracle.jdeveloper.webservices.model.proxy.WebServiceProxy$ ProxyJavaWebService. < init > (WebServiceProxy.java:2268)
  at oracle.jdeveloper.webservices.model.proxy.WebServiceProxy.updateServiceModel(WebServiceProxy.java:1701)
  at oracle.jdeveloper.webservices.model.proxy.WebServiceProxy.setDescription(WebServiceProxy.java:525)
  at oracle.jdevimpl.webservices.wizard.jaxrpc.proxy.ProxyJaxWsSpecifyWSDLPanel.setDescription(ProxyJaxWsSpecifyWSDLPanel.java:238)
  at oracle.jdevimpl.webservices.wizard.jaxrpc.common.SpecifyWsdlPanel.buildModel(SpecifyWsdlPanel.java:1109)
  to oracle.jdevimpl.webservices.wizard.jaxrpc.common.SpecifyWsdlPanel$ 5.run(SpecifyWsdlPanel.java:661)
  at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:655)
  at java.lang.Thread.run(Thread.java:619)
  Caused by: oracle.jdeveloper.webservices.tools.WsdlValidationException: error in creating the model of wsdl "http://host.domain.com:port / webservices/plsql/SOAProvider/per_absence_record /? WSDL': org.apache.xerces.impl.xs.XMLSchemaLoader.loadGrammar ([Lorg/apache/xerces/number/Analyzer/XMLInputSource ;) V
  at oracle.jdevimpl.webservices.tools.wsa.WsaAdaptor.newWsdlValidationException(WsaAdaptor.java:825)
  at oracle.jdevimpl.webservices.tools.wsa.WsaAdaptor.getSeiInfo(WsaAdaptor.java:515)
  at oracle.jdeveloper.webservices.tools.WebServiceTools.getSeiInfo(WebServiceTools.java:523)
  at oracle.jdeveloper.webservices.model.java.JavaWebService.getSeiInfo(JavaWebService.java:1741)
  at oracle.jdeveloper.webservices.model.java.JavaWebService.createPortTypes(JavaWebService.java:1496)
  ... 12 more
  Caused by: oracle.j2ee.ws.common.tools.api.ValidationException: error in creating the model of wsdl "http://host.domain.com:port / webservices/plsql/SOAProvider/per_absence_record /? WSDL': org.apache.xerces.impl.xs.XMLSchemaLoader.loadGrammar ([Lorg/apache/xerces/number/Analyzer/XMLInputSource ;) V
  at oracle.j2ee.ws.tools.wsa.jaxws.JaxwsWsdlToJavaTool.getJAXWSModel(JaxwsWsdlToJavaTool.java:664)
  at oracle.j2ee.ws.tools.wsa.WsdlToJavaTool.createJAXWSModel(WsdlToJavaTool.java:475)
  at oracle.j2ee.ws.tools.wsa.Util.getJaxWsSeiInfo(Util.java:1357)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  to oracle.jdevimpl.webservices.tools.wsa.Assembler$ $2 1.invoke(Assembler.java:218)
  to $Proxy35.getJaxWsSeiInfo (Unknown Source)
  at oracle.jdevimpl.webservices.tools.wsa.WsaAdaptor.getSeiInfo(WsaAdaptor.java:505)
  ... 15 more
  Caused by: java.lang.NoSuchMethodError: org.apache.xerces.impl.xs.XMLSchemaLoader.loadGrammar ([Lorg/apache/xerces/number/Analyzer/XMLInputSource ;) V
  at org.apache.xerces.jaxp.validation.XMLSchemaFactory.newSchema (unknown Source)
  at com.sun.tools.xjc.reader.internalizer.DOMForest.weakSchemaCorrectnessCheck(DOMForest.java:487)
  at com.sun.tools.xjc.api.impl.s2j.SchemaCompilerImpl.bind(SchemaCompilerImpl.java:227)
  at com.sun.tools.xjc.api.impl.s2j.SchemaCompilerImpl.bind(SchemaCompilerImpl.java:85)
  at oracle.j2ee.ws.common.tools.databinding.jaxb20.JAXB20TypeGenerator.generateJavaTypes(JAXB20TypeGenerator.java:117)
  at oracle.j2ee.ws.tools.wsa.SchemaTool.genValueTypes(SchemaTool.java:186)
  at oracle.j2ee.ws.tools.wsa.jaxws.JaxwsWsdlToJavaTool.getJAXWSModel(JaxwsWsdlToJavaTool.java:647)
  ... 24 more
  
  
  ===============================================================================
  
  Please suggest your advice.
  
  With respect,
  KSD

  Hello

  It is a recommended approach to have proxies in separate projects. When keep you them in the same project, in some corner cases, the generator (try) replaces files and this can cause inconsistencies. If you must have multiple proxies in the same project, and then try to keep the package root for the generated only types and see if that helps. Otherwise, you will need to separate.

  Thank you
  Vishal