Model only ON R7300DST is power, but internet and network work?
The device is filled for a century link C1000A. The only LED that is on is power - all others dark.
However, the device seems to work. I have internet, I have access to USB flash and network drives.
I haven't has extinguished/turned on the deivce no change.
Suggestions?
Mark
Some routers have a switch in the back to turn the lights or set up router has this option. Please
Check your manual.
Tags: Netgear
Similar Questions
-
LAN and WLAN connections
My old wired desktop xp died, it was the first computer on my home network. My friend just got a new office and gave me an old. I have a laptop which has windows 7 and is connected wireless. It is still plugged in and works fine. How can I get my new/old office to connect to the internet? I ran to the implementation of new Internet and network connection wizards, nothing happens. When I go to internet connections, it shows that it is connected, but I can't seem to connect. Help, please!Hi ShannonStrong,
· What exactly happens when you try to connect to the network?
· You receive an error message or error code?
You can follow the steps in the Microsoft Knowledge Base article mentioned below and check.
How to troubleshoot possible causes of Internet connection problems in Windows XP
http://support.Microsoft.com/kb/314095
You can also see this article:
Networking of computers running different versions of Windows
Note: The article also applies to Windows XP
Let us know if this information useful.
-
I have problems connecting with adobe catalyst in program adobe muse. A pop-up window appears saying that "access to adobe ID has expired. Check your connection and try again later. I checked my internet and everything works fine. Can someone help me with this?
Hello
Please try the steps in the following thread
-
Can anyone help?
Now, this is getting very frustrating.
I can connect to the internet and browse most Web sites. My email works fine but I can't connect to websites www.microsoft , Norton is 'unable to connect to the Live Update server, check the internet connection' and my media center can't find my internet connection.
What is going on?
I have a subscription to Norton who can't find any problems. I also downloaded onecare and trojan remover, returning with a clean report.
Please help before I go out what remains of my hair.
What about FrankHello
You can access Microsoft.com, McAffee.com, Symatec.com? Thinking you have a conficker.
Check with this site
http://www.confickerworkinggroup.org/infection_test/cfeyechart.htmlAlert on the Win32/conficker virus
http://support.Microsoft.com/kb/962007Protect yourself from Conficker
http://www.Microsoft.com/security/worms/Conficker.aspxHow to remove the worm Downadup Conficker (Uninstall Instructions)
http://www.bleepingcomputer.com/virus-removal/remove-Downadup-ConfickerHow to manually remove the Conficker worm
http://www.411-spyware.com/Conficker-worm-removal#how-to-removeBDTool to remove
http://www.bdtools.NET/-----------------------------------------------
Run the malicious Microsoft removal tool, scan with Malwarebytes, Prevx to be sure you know all the
malware involved and if necessary use UnHackMe.Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows Update - if necessary, you can download it here.
Download - SAVE - go where go out you there - top - right click RUN AS ADMIN
(Then run MRT as shown above.)Malicious removal tool from Microsoft
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMalwarebytes - a scanner at the request - update on the updates tab and run whenever you think malware.
http://www.Malwarebytes.org/Here are some free online scanners to help the
http://www.eset.com/onlinescan/
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1also install Prevx to be sure that it is all gone.
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
http://www.prevx.com/Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.asp--------------------------------------------
Also do to the General corruption of cleaning.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------
Run Malwarebytes when you can.
IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK
IE - Tools - Internet Options - Security - reset all Zones by default level - apply / OK
Close IE
IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
"(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
are bad, but some can cause your question. (Toolbars are BHO)
http://securityxploded.com/bhoremover.phpStartup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlDon't forget to do:
Logon as administrator
Start - type in the search box-> COMMAND - find on the list above - CLICK RIGHT - RUN AS ADMIN
Enter each of these one at a time and press ENTER after each
ipconfig/flushdns
nbtstat-r
nbtstat - RR
netsh int Reinitialis
netsh int ip reset
netsh winsock reset
Reset
------------------------------------------------------Here are a few rootkits if it were a question:
SpyDLL Remover - free
http://securityxploded.com/spydllremover.phpAdvanced Windows Service Manager
http://securityxploded.com/winservicemanager.phpRun the Rootkit Revealer - free
http://TechNet.Microsoft.com/en-us/Sysinternals/bb897445.aspxUnHackme - trial
http://www.Greatis.com/UnHackMe/This shows how to use UnHackme and includes a link to version 2.5 – use it as a guideline and current
available as version above is 5.5
http://safecomputing.umn.edu/guides/scan_unhackme.htmlIceSword - free
http://www.AntiRootkit.com/software/IceSword.htm
Instructions and pictorial
http://securityxploded.com/IceSword.php
Tutorial for use of IceSword
http://translate.Google.com/translate?hl=en&SL=zh-CN&u=http://soft.zol.com.CN/2004/0803/145163.shtml&prev=/search%3Fq%3Dicesword%26hl%3Den%26lr%3DRevo Uninstaller - free
http://www.revouninstaller.com/I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Wireless connects, but internet does not work
My wifi signal is strong. My computer says that it is connected. Diagnosis shows the signal is stable, but when I open a browser, it does not connect. It just seems to take forever, but nothing ever happens in Safari. Chrome has said, "there no internet connection. Your computer is offline. "and that Firefox says: 'server not found '.
I tried the Ethernet connection, but it's the same story. Computer indicates recognition signal, but it will never truly connect. It will connect in Safe Mode, however.
I don't know if this is related, but iTunes does not work either. I open and just get the reel spinning forever. It is said he is unresponsive, and I force quit.
Here is some information that might be useful:
-iPhones and MacBook in the House are fine to connect to Internet.
-My internet company just came and installed a new router/modem. We had a few problems before (this is why they came to reinstall the hardware), so I don't know if this has something to do with him or not.
iMac
OS X El Capitan 10.11.6
3.2 GHz Intel Core i5
Deselect if selected proxy.
System Preferences > network > advanced > proxies tab
Unlock the lock if you have to.
Under "Select the Protocol", uncheck all box if marked cheque.
Click 'OK' and then 'apply '.
-
I just bought a replacement bb bold 9000 off ebay (it's an at & t unlocked handset I bought after my bb bold got stolen... total disappointment) and it was working fine all week until last night when he stopped being able to manage incoming and outgoing calls and texts. E-mail and internet functions still work that is very special.
also, some more info, when I put my sim card into another handset (in this case a nokia e65) all my work of normal calling features and when I put a different SIM in the "BOLD" the same thing happens (when I try to make a call, it instantly opens with a warning of the call). Another thing is that the "BOLD" indicates full service coverage...
currently the "BOLD" on the fairs...
v4.6.0.304 (Platform 4.0.0.247)
Note: im on the Australia and for some reason, I can't update the os v5
Here, any help would be greatly appreciated, and I would be happy to provide any information to anyone who is willing to help.
jenm_ wrote:
apparently v5.0 is still not available on my carrier / in my country (aus)) and yet its does not work...
any advice would be so greatly appreciated!
There you go. This is the reason.
For the missed show called, I don't know. The unit was unlocked when you bought on eBay?
My first suggestion would be do not have the feature of your problem. Return it and get your money back.
-
Windows Media Player will not play mp3 or mp4, but Windows and YouTube work OK
When I go to a media file (.mp3 or .mp4) and click on it, I get a message
Windows Media Player encountered a problem while playing the file.By clicking [help] and follow the signs, I see that my computer has two devices in the "Sound, video and game controllers" section, both have the status "this device works correctly.
I get Windows sounds normally (startup, etc.). Can I play a clip from YouTube and videos that I prepared myself with Camtasia. However the same video will not play when I click the .mp4 and Windows selects the default Windows Media Player program.
How can I fix it?
Thank you, Robert.
Hi Robert,
It looks like .mp4 files are not supported by Windows Media Player.
Reference:
Information on the types of media files that supports Windows Media Player
http://support.Microsoft.com/kb/316992
Video MPEG-4 can be encoded and stored in an .asf file container by using the tools of Windows Media and Windows Media Encoder. You can then read these files with Windows Media Player. For more information about Microsoft and MPEG-4 support, visit the Microsoft Web site at the following address:
You can search your favorite engine and download and install the codec that is compatible with the operating system.
Note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.
Hope this information helps. Response with status so that we can help you.
-
wireless connected but internet does not work
Since yesterday my laptop has had problems connecting to the internet. It will say that it is connected to the internet but yet when I open a browser or any other program requiring internet, it does not work. However, when I use the same connection from another laptop, the internet works.
I tried to use the option diagnose & repair and he always tells me that everything is fine. I also tried to restart my laptop and check my firewall settings, which did not help either. any help would be greatly appreciated!
Hello
Turn off the router or the modem (unplug the power supply) - wait 3 minutes, then the power restore - restart the computer.
If necessary:
Two methods - I would try 1. first and use 2. only if necessary because with 2 it can come back.
1.
Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
Update your WiFi drivers on computers. How you are positioned in the router? Are there
obstacles in the path?Actually try updating your driver and disabling the network logon. If you usually use WiFi try a wire
and if you usually use a wire try WiFi. Update, one being not used 1.Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
manufacturer of system become your backup policies).Repeat for card (NIC) network and is a good time to get the other updated drivers as Vista like
updated drivers.I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
are almost always old, and you can search drivers manually as needed.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx------------------------------------------------------
Make sure you know the details of connection to your router wireless and wired - SSID and password.
You lose connection when you do and have to redo your logon.
Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
lower left click on merge or delete network locations - REMOVE all instances of your network (and the
others you don't use anymore) - REBOOT. Start - Connect To log on to the network.-----------------------------------------------------
Check this box:
Strange problem with Internet under Vista
http://www.catonett.com/blog/archives/194Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
http://support.Microsoft.com/kb/928233/en-us----------------------------------------------------
And:
Network connection problems
http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx==============================================
2.
Do a system restore before it happened.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
I hope this helps. Rob - bicycle - Mark Twain said it is good. -
Satellite P30 will not start, but shows the power on LED and fans work
I work on a P30, radiator cleaned, the basic form of new fine thermal compounds, worked for a few hours, then turned it off and move the power LED lights, fans, cd rom works, but it is she, no display, no boot, nothing.
Any ideas on how to solve this problem would be a great help.
Plug
P30
P4 3.2 ht
1 gig of ram, tested.
XP proHello
On this path, it is not easy to say what can be the problem and just inquiry may help, but from your description, I'm afraid that there are some critical material damage. It may be something wrong with the power supply (motherboard) or perhaps is the grilled CPU if you have done something wrong with the thermal paste.
Sorry, but I think you should contact the partner customer Service in your country and check it properly.
-
Not sure if there is an error or a breach of security on my system, but my Mcafee Cox Security Suite client will say sometimes randomly the Parental control has been disabled, and the network firewall and Internet has been disabled and must be fixed. When you click on fix, the problems will go away, but sometimes the Protection status check will reappear do later me wonder if someone attempts to access or attempt to take control of my computer in some outside way. Using Windows Defender and Mcafee Viruscan I found nothing so far, however in one file past a Nakido.exe was found and attempted to remove, it is no longer, but I seem to always be able to find traces of the file on my computer, which makes me wonder if the Trojan horse still has limited access to my computer and try to manipulate items and just has not been detected yet.
Try to contact McAfee Support for assistance. But before that try one of these:
(1) Windows Update
(2) try to install the latest Service Pack
(3) ensure that your compatible version installed in Windows otherwise (ask McAfee upgrade option to the compatible version) -
My cousin gave me his blackberry that he bought in the United States, T-Mobile has been the supplier of services. I use the phone with excellent service in Austria, the claimant is Orange. I was going great but now its stopped make or receive calls. When I try to make calls it displays "call failed" and used to take incoming calls or the other. I have internet with an excellent signal.
Thank you very much for your help!
jcjc2012 wrote:
This is the message that appears: "you try to open a secure connection, but the server certificate is not approved: continue, close the connection, see certificate.
I could not find the app you recommend to remove.
Yes... it's probably different than what I guessed. Normally, however, who comes from the web browser... not while performing a call... the steps that led to the receipt of this message would be so important to understand if it has nothing to do with your problem.
jcjc2012 wrote:
What do you think about Smart Dialing or call except?
Smart dialing in the + 1 country code, but Austria, where I live is + 43, I found, that's right, what I have to change?
Smart Dialing could be causal... having developed a country code other than the one you are in would be wrong. See this:
- KB20595 How to disable the smart Dial feature
Turn it off or set it to your current location.
jcjc2012 wrote:
What do you think about Smart Dialing or call except?
About the call to ban, to do something asked of me the password, but I forgot my password, possibility of reactivating the phone system?
I'm not sure call him except password... my service doesn't have this feature. But it seems (to review some user manuals) that there is a required specific password and this password is provided to you by your mobile service provider.
Good luck!
-
2611XM gets WAN IP cable modem, but internet does not work
Hello
I have a strange problem with my 2611XM router. At home, that I que je suis am put my cable modem in Bridge mode and try to configure internet access via 2611XM router. Here are details on the configuration of the ILO
interface FastEthernet0/0
WAN description
DHCP IP address
NAT outside IP
IP virtual-reassembly
route IP cache flow
automatic duplex
automatic speed
!
interface FastEthernet0/1
LAN description
192.168.99.1 IP address 255.255.255.0
IP nat inside
IP virtual-reassembly
automatic duplex
automatic speed
No mop enabled
!
IP forward-Protocol ND
IP route 0.0.0.0 0.0.0.0 FastEthernet0/0
!
!
IP http server
local IP http authentication
IP http secure serverIP nat inside source map route SDM_RMAP_1 interface FastEthernet0/0 overload
!
access-list 101 permit ip 192.168.99.0 0.0.0.255 any
!
allowed SDM_RMAP_1 1 route map
corresponds to the IP 101
!
!
!
control plan
!
!
!
!
!
!
!
!
!
!
Line con 0
line to 0
line vty 0 4
privilege level 15
password XXX
local connection
transport input telnet ssh
!
NTP-period clock 17208167
!
endThe problem is that the internet is not accessible from 192.168.99.0 network. I can't even ping any public ip address of the router. Although I get successfully WAN ip on the fa0/0 interface of the cable modem. Any help appreciated.
Thank you
Hello
Try below:
no ip route 0.0.0.0 0.0.0.0 FastEthernet0/0
no nat ip inside the source map route SDM_RMAP_1 interface FastEthernet0/0 overload
no access list 101 didn't allow ip 192.168.99.0 0.0.0.255 anyIP route 0.0.0.0 0.0.0.0 dhcp
access-list 1 permit 192.168.99.0 0.0.0.255
IP nat inside source list 1 interface FastEthernet0/0 overload -
Please tell me any driver so that it works on Windows 7 and
Hello
I suggest you to check out the link and that this game pad is not displayed as compatible with Windows 7.
http://www.Enter-multimedia.com/gamepad_single_vibration.html
I suggest you to install the drivers in Windows Vista compatibility mode.
Reference:
Make older programs in this version of Windows
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
I suggest you check the link for additional assistance:
-
Why is-internet and network server
When online on my Macbook Air, I often find internet connection dropped and research in Network preferences / help / diagnosis, I find server and Internet keys shown yellow status. I can almost always reconnect easily by clicking on continue and re - select the wireless network (a 5 Ghz one, but the same problem exists with my network no 5 Ghz), then I click on option to allow Network Diagnostics key to the network selected in my keychain.
This often works very well in a few seconds, so not a big deal but sometimes very annoying because it can occur several times in a short period or during a day, and then not at all for hours or days, but often it's almost every day.
Here is a list of equipment etc:
MacBook Air 10.10.5, Imac 10.10.5, VirginMedia superhub, Airport Extreme (in bridged mode), Airport Express (closer), Apple TV (often disabled) iPhone 6s.
Problem is really only apparent on Macbook Air, iMac has (if Wifi also in operation usually) ethernet connection. iPhone6 seems to have no problem with wifi internet at home or elsewhere.
I quite often other problems in my Wifi system, however, recently, especially when you use Apple TV, Airport Extreme and Express and modem even falling Airport utility, which I always managed to correct later in various restarts and resets. But the preceding is the most frequent being almost a daily reality at least once or twice.
I tried to choose different channels in Airport utility for Airport Extreme and Express networks, but this made the incredibly slow connection (normally it is 36 Mbps on Macbook). I also disabled IPv6 on all devices (or put the link-local), and this seemed to help with the problem of the Apple TV appears to have had no effect on this.
I also disabled Bluetooth on Macbook while writing this, but the problem has happened several times already.
This happened to my wife (for me) for awhile now. I had not thought to check this forum until now. We have Airport Extreme in Bridge connected to Comcast cable modem mode (not sure of the brand/model right now) and the connection features include retina Macbook Pro, Macbook Air, iPhone 2 6, iPad, iPad 2 Air Air, not to mention a number of non-Apple devices. It is the problem most often on MacBookAir and iPad Air. Turns off WiFi for a few seconds, then turn it back on again and then it works OK. This seems to occur several times a day and could happen just after awakening from a sleeping device.
All devices are up to the latest version of iOS and Mac OS x
Another issue that could be related have to do with the Airport Express in "Client" mode Set up to provide wired ethernet port for a device far the main router. Note that in this mode, it is not (supposed to be) providing a wifi signal, just in its port ethernet access. It seems to work, but quite often, maybe once a day, he kills wifi in its immediate vicinity. If I'm in the room with him and lose the wifi then go to a location close to the main router I'm back online again.
I would like ideas or cures that anyone might have on any of these problems.
Ed
-
I have a big red X on my wireless signal icon, but I can still connect to the internet. Then after the recent updates I lose internet totally. Summer fixing it through system restore. Tired to do it every two days. Contacted verizon, they say it's a problem of configuration system32folder. But what I do about it?
Hi LorenzoMiller,
Thanks for posting your query in the Microsoft Community. According to the description of the problem, there is a red X on the icon of the wireless signal. Provide the following information:
· Updates (issues KB) have you installed?
· You get the error message?
· You use a third-party security software?
Follow these methods.
Method 1: Temporarily disable the security software .
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2: Follow these steps:
Step 1: Start the computer in safe mode with network and check if the problem persists.
Startup options (including safe mode)
Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
Note: After completing the steps in the clean boot troubleshooting, follow step 3 from the link to start the computer to a Normal startupmode.
Method 3: Follow the steps in the article.
Windows wireless and wired network connection problems
You can see these articles for more information:
How can I troubleshoot network card?
How to reset the Protocol Internet (TCP/IP)
I hope this helps. Let us know if you need more assistance.
Maybe you are looking for
-
How can I update video driver Tecra A2 OpenGL 1.1 to 1.3?
I'm trying to run some software of astronomy on my Tecra A2 but it says that the video driver is OpenGL 1.1 and requires at least OpenGL 1.3.What this means and how can I get an updated driver if you please.
-
Hello file search: KeyScrambler_Setup.exesearch string: key - would find the above filesearch string: scrambler - cannot find the file! now I'm very confused. can someone pls tell me why? then I could correctly search and find my next record! Thank y
-
I get a code 10 for my CD-ROM/dvd-rom.
My e: drive does not appear on my pc. I have windows Vista Home Basic. I tried the other answer to you guys, but my reg page is different. can you please help me...Thank youDebra
-
Strange characters print on an OfficeJet 6500 a Plus
Hello I have an OfficeJet 6500 has more which works fine until my wife started to print number of PDF and HTML documents academic double-sided. The printer began to print in English and then returned to "gibberish" to half way through. I have a Windo
-
In Outlook Express, you can configure the system to send you an automatic response when an email you sent has been read. Is there a similar function on Live Mail