Model WRT1900AC consistent, persistent of the GALs of WiFi

Similar Questions

• First group title below displays under the column headers using the model 23 classic report with the help of repeat titles on break

  Hello

  I am migrating an application from 3 APEX APEX 4.2 on a thing I noticed with the classic reports when I put them in the model 23, it's that the first section break has break notch under the headings of columns for this section of line while the remaining lines properly have it display above the headers on the subsequent sections of group.

  
  When I look at firebug code I saw that all the tables but the first, the break line is included in the last line of the previous table, so I can see how it did not work for the holidays since.

  I have tow questions.

  1. is it really intentional because it seems not terribly elegant and my users to zero immediately above as a perceived bug.

  2. is there a reasonable job around always use headers repeat on break? I have multiple reports on the same page in places so switch to interactive reports is not a quick fix for me in this case.

  Example of a question can be seen at apex.oracle.com at home

  Thank you

  Brad

  Roadling wrote:

  Hello

  I am migrating an application from 3 APEX APEX 4.2 on a thing I noticed with the classic reports when I put them in the model 23, it's that the first section break has break notch under the headings of columns for this section of line while the remaining lines properly have it display above the headers on the subsequent sections of group.

  1. is it really intentional because it seems not terribly elegant and my users to zero immediately above as a perceived bug.

  The Standard report template definition in issue 23 contains thead and tbody elements:

  Before the column header

  Column title template

  #COLUMN_HEADER#
  

  After the title column

  After the lines

  
  
  
  
  
  
  #PAGINATION#
  
  
  #EXTERNAL_LINK##CSV_LINK#
  

  This is intentional, the best practice for marking up HTML tables. What is not expected is the problem that arises when this model is used with the break of repeat titles on break formatting option. The repeated headings result table consisting of soup of tags containing several poorly constructed tbody and thead, which is not valid elements.

  2. is there a reasonable job around always use headers repeat on break? I have multiple reports on the same page in places so switch to interactive reports is not a quick fix for me in this case.

  Create a copy of the report model Standard in Standard (break formatting) for use with reports of the break, remove the thead and tbody definitions of template tags and the breakdown of the reports to use the new model of change. (Or, if you use mainly break reports using the Standard template, keep the tags in the copy and remove them from the original in order to minimize the number of reports, you need to change.)

  Personally, I would create a report model of line custom to break complex reports in order to be able to have complete control over the structure and presentation.

• Model Dreamweaver is still blocking the body tag?

  Hello

  I use a DW template with an editable and it blocks the body tag. I can't address the body with a div or class tag.

  Y at - it a possibility to use a model that does not block the body tag?

  Thanks for the help and support.

  Karsten

  First, you must define an editable tag attribute in your model for thetag.  Later, you will need change this attribute on the child pages.

  This article has a NOTE: with screenshots on how to do it.

  http://ALT-Web.com/articles/persistent-page-indicator.shtml

  Nancy O.
  

• Cannot open model of newsletter Pages, only the blank document

  Trying to open a model of newsletter Pages. When it is launched and I click New, that only opens a blank document. When Pages is closed and navigate to it through applications, then I click the new Document icon, it still just opens a blank document. In the past, this has led me to a window when I choose a model. I rebooted and the chance to be better. Pages version: 5.6.1. Running OS X El Capitan 10.11.4

  Pages of preferences: general. Deselect use template: Blank and reselect Show model selector. Quick pages.

  Now you can select models like before the next time that you open Pages and click on new document.

• Qosmio X 300-12 H when this model will be available in the market?

  Qosmio X 300-12 H when this model will be available in the market?
  I mean like PC world shop.
  Do you intend to send in stock in this year?

  Not anyone can pay full amount byuing this laptop online.
  Thank you.

  > Do you intend to send in stock in this year?
  What exactly do you mean by saying that?
  Do you n t know that there is a user to user forum?
  I don t know when this laptop would be on stock but AFAIK this 300-12 H X came out for a British market and should be available in the United Kingdom only.

  Maybe you should wait and ask a few different dealers in the United Kingdom for this product

• What model is the iPhone Unlocked sim-free 6 s, model 1633 or 1688? The locked phone can be unlocked and used on any sim

  What model is the iPhone Unlocked sim-free 6 s, model 1633 or 1688? The locked phone can be unlocked and used on any sim?

  If the iPhone is locked: only the provider it is locked, can unlock.

• Service Manual for Lenovo Edge 15 model 80K 9 to replace the screen

  I have and try to find a service manual or a repair for the 15 Lenovo model 80K 9 so I can replace a broken screen. I was not able to find a video or a PDF file that shows how to shoot this model so I can replace the screen.

  Thank you

  Matt

  Good day and welcome to the community.

  See your hardware manual: https://download.lenovo.com/consumer/mobiles_pub/lenovo_flex_2_pro_15_edge_15_hmm.pdf

  Manual p. 50-58 in the face of the LCD Assembly and its components.

  Does that help?

  Kind regards.

• The model resource management lots with the flexibility to order step

  Hey, the people of Teststand.  What is the best way in 2014 Teststand to do this?  I'll implement test DUT 4 in parallel using the model of batch processing.  The test sequence is in two parts.  2 DUT at a time can run part 1.  While 2 DUT are testing part 1, I want to than the other 2 DUT to test of part 2.  Then when they are done part 2, wait for part 1 slots become available and then run part 1.  And these DUT who had run part 1 all first then work part 2.

  Thank you.   -Joe

  Joe Czapski

  Sonos

  Boston, Massachusetts (United States)

  As I understand it, a step of the automatic planning to the next level would be perfect for this:

  Automatic calendar

  Use Auto demand resources ("Part 1 - Slot 1", "Part 1 - Slot 2") / / these are two variants different resources
  steps that part 1. Use the acquired lock output if you need to know what slot

  End

  Use Auto demand resources ('part 2 - Slot 1', 'Part 2 - Slot 2') / / these are two variants different resources

  steps that part 2. Use the acquired lock output if you need to know what slot

  End

  End

• The model Interface Toolkit does support the cRIO-9068 again based on Linux?

  Hello, I have a cRIO-9068 and need to integrate a Simulink model in my controller. The model Interface Toolkit does support the cRIO-9068 again based on Linux? Besides, don't Veristand? This page assumes that it is not:

  http://digital.NI.com/public.nsf/allkb/2AE33E926BF2CDF2862579880079D751

  Thank you

  Hi Southern_Cross,

  Based on the readme:

  http://digital.NI.com/public.nsf/allkb/D3F40C101B66128186257D020049D679

  It seems that it is now supported! These resources should provide a few more details:

  http://zone.NI.com/reference/en-XX/help/374160B-01/vsmithelp/mit_model_support/

  http://digital.NI.com/public.nsf/allkb/E552B0CD4E48215586257DF7005BE055

  Please note that NI VeriStand 2014 can't stand it targets NOR Linux in real time.

  Kind regards

• Error 1074395241: The model descriptor does not contain the data required for the corresponding rotation invariant.

  Hi all

  I use the model Match 4 IMAQ to detect the angle of rotation of an image of model. However, it displays the error: "error 1074395241: the model descriptor does not contain the data required for the corresponding rotation invariant." What exactly is the problem? How to solve this problem? The details are explained below.

  My project is a bit complicated. Part of the block diagram containing the IMAQ Match model 4 is illustrated below:

  

  The source image is a series of images of images read from an AVI video (I used a loop for to process the images frame by frame). The image of the model is an area of the first selected image. So, this means, the user selected the ineterst object in the first frame of the video, and each of the following images to find the object corresponding interest & determine its rotation angle. When I run the above diagram, there no error. However, it shows the angle of rotation zero no matter what it is 'really '. Therefore, I changed the schema by adding parameters, listed below:

  

  But in this case, when I run it, it shows the error I mentioned in the subject line.

  If you need more information about my project to identify the problem, please let me know.

  Thanks in advance.

  S ' Please example from model that comes with labview First
  Go to labview Help > find examples and you can search for example.
  -You create model with angle range and what kind of special criteria you want to use.
  -To do this you must use IMAQ learn pattern before using IMAQ model Match 4
  Reference:http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/

• Flight Simulator panels and add on models fails to load on the main screen

  Original title: problem FSX and windows

  Some of the panels such as the F-18 and add it on the templates may not appear or do not come up on top of the screen when picked up. I just reinstalled windows and do not know what happened during the installation. I'm not sure if all the main files are missing for something wasn't going to install it. I run FSX with acceleration pack and is a 32-bit microsoft windows xp.

  Hi United869,
   
  Try these steps and check the result.
  Step 1: Download and install the drivers for Windows XP-compatible video card.
  a. visit the video card or the system manufacturer's Web site to download the driver.
  b. install the driver and restart the computer for the changes to take effect.
  c. start the game and check the difference.
   
  Step 2: Adjust display settings
  a. right click on the desktop, click on properties.
  b. click on the settings tab and adjust the screen resolution at best.
  c. click ok to apply the changes.
   
  Step 3: If the problem persists, reduce the game to the minimum settings. To do this, follow these steps:
  a. start the game.
  b. click on settings.
  c. click Reset defaults.
   
  See Troubleshooting of problems in Flight Simulator X graphics
  Step 4: Check the Windows updates to see if there are updates available for flight simulator
  a. see using Windows Update for Windows XP

  See Solutions for the Flight Simulator Centre

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Router Linksys WRT1900ac - unable to access the USB drive shared on the WiFi 5 GHz

  Hello

  I have a strange problem. I use my Linksys WRT1900ac for almost a year and it works great. There is a USB hard drive plugged into it and I have no problem to access the data. I brought a new desktop computer that is compatible 5 GHz. All my other devices are connected trought 2.4 GHz.

  When I connect my computer to the 5 GHz WiFi network, I have access to the internet and any other player shared the router. It I connect it to the network 2, 4 GHz, it works. The 2.4 and 5 GHZ networks have the same configuration. The only difference is the SSID. I added 5g at the ent of the 5 GHz one.

  I really don't understand why I can't access the shared drive of the 5 GHz network and it works on the 2, 4 GHz. I forgot something?

  Thanks to anyone who can help!

  It could be that when you connect to the 5 GHz network, your PC is set to public and therefore discovery network is disabled, then you are not able to see the drive.  Just throw it out there.

• WRT1900AC shows connected to the laptop wireless, but 'NO internet Connection' triangle

  recently replaced EA3500 Cisco that quit smoking with WRT1900AC

  configured for the wired network OK

  will connect WIFI for android Tablet

  DOES not connect to win 7 PC... worked fine with the old router (2 years)

  reset the WRT1900AC to factory settings... allowed 2.4 and 5 ghz...

  PC sees the wireless network and connects with password, still "NO internet connection".

  any ideas?

  Thank you waltinbatonrouge

  Thanks a lot for taking the time to suggest a fix... But the WRT1900AC went back to Best Buy yesterday. Easy back, by the way.

  Oh just a parenthesis... the WRT1900ac has finally connected ok Cat5. The speakeasy speedtest showed on 100-105Mbps of download, the same as the old EA3500 seized croasse.

  So, instead, I found an EA3500 used in a store of the local computer. Reset default and he already had the latest firmware.

  The old router Cisco EA3500 used the very simple "Cisco Conect" utility.

  Forums directed me to a version EA3500 of the "Linksys WiFi Smart" utility, which was a painless and immediately picked up the wireless for laptop Toshiba.

  He ran the same features on the speedtest and connected 'excellent' on room android...

  Have a great week!

• HP G62-355DX: recommend some course HP laptop model that can be used the same hard drive using G62-355DX?

  I have a HP G62-355DX dead, I think the hard drive is ok, so I want to buy a new laptop HP to change the hard drive, so I can recover my data and OS environment.

  Could someone please recommend some course HP laptop model that can be used the same hard drive as G62-355DX use?

  Even the hard drive can not put it in the bag laptop, but work with the HARD drive interface.

  Or is there any external HARD disk enclosure can be used to read the data hard disk, the data does not have compreesed.

  Thank you in advance.

  Hello! You need a new PC Yep!
  But there are other ways to do

  You can buy a SATA USB adapter that will allow you to plug in the HARD drive on another PC and the take-off data

  NOW YOU CAN ONLY SAVE DATA FROM THE DISK IF THE HARD DRIVE IS NOT DEAD

  Good luck!

  Best regards: 1029rjmenvy17t

  Please "KUDO" if you like for thumbs to the top and "Accept as Solution" if this fixed your problem

  To help others find it and helps solve them the same or similar problems

• How or there is no model code keep update/sync the local database indexedDB for MySQL database online?

  How or there is no model code keep update/sync the local database indexedDB for MySQL database online?

  Unfortunately there is no direct connector for an application of WebWorks to a back-end database. You will need to do, is to have some middleware web server (Apache, Node.js, etc.) who manages a web service that you can make an HTTP request to and GET, POST, UPDATE, DELETE data. Middleware and then transmits commands to the back-end database and returns the results to the finished device.