Unable to get additional decimals of a double digital

Similar Questions

• Client DHCP is unable to get a valid IP address from the DHCP server.

  Client DHCP is unable to get a valid IP address from the DHCP server. I have a home edition of Windows XP attempts to connect to my router wirelessly with wireless or wired connection but I get an error in Event Viewer with the discription DHCP 1007 error message. From what I researched, I discovered that the DHCP service depends on the AFD, TCP/IP and NetBT services. All these services are correctly place and worked very well (even the DHCP service is running without error) but every time I try to release/renew my IP address I receive than DHCP warning in the case where the viewer and I just cannot get a valid IP address of the server (router) I also have one of these verizon wireless G3 usb adapters and it works fine. I also have a good ping back when I try to do a ping localhost (for the closure) I also tried the preinstallation of uninstalled drivers from the adapter/s and nothing works. The only entrees in the registry for DHCP error are also AFD, NetBT and TCP/IP nothing else there, also all the files in the/system32/drivers afd.sys netbt.sys and tcpip.sys in addition to solve the problem, I'll mention that I installed and reinstalled Northon earlier, I do not remember if the problem appears before or after that. I receive also any error or warning in the security log or at least I don't know how to read: P

  Thanks in advance

  Thanks for the information.

  I hope you know that it is risky to connect the laptop to the Internet with no firewall and no antivirus... If this laptop is already connected to the Internet in this State, he is perhaps already infected.

  You said you know the router works because the other computers can connect successfully to it.  You should check the configuration of the router to make sure that it is not configured to limit the number of IP address it supplies, and (b) it is not configured to filter users by MAC address.

  When this laptop is connected by Ethernet, even if he gets the IP address of 169.254.x.y, can you ping the router?  Find the IP address of the router on any computer connected to it by running the ipconfig command in a command prompt window.  The "default gateway" is the IP address of the router.  Run the ping command in the command prompt window as well.

  If the ping is successful, it is possible that you might be able to use an IP address in the correct range for an Ethernet cable (but I doubt that it works for the wireless).

  It is very difficult to cite anything in this forum.  If you click on the link "Reply citing", all of the message to which you are replying is quoted.  You can copy the citation and delete parts of it, but it is not very user friendly.

• Unable to get the automatic updates of Windows.

  Suddenly I'm unable to get the automatic updates of Windows.  When I use Windows fix - it, it is unable to do so, stating that automatic update components need repair.  Is there a way to repair the components?

  Hi Robert,.

  Reset windows update components.

  http://support.Microsoft.com/kb/971058

  Use the automated fix solution, then check windows update to see if it works.

  Additional information: If you are not fully patched for Windows XP SP3, download and install Windows XP SP3 from the link below.

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Ignore the warning text on the professionals and the network installation.

• I'm unable to "get out" of the language bar to appear in my taskbar.

  Missing language bar

  Hi all, hope someone can help me solve my problem here. I m unable to "get out" of the language bar to appear in my taskbar. I followed the instructions in the window help by installing the language, but it seems that the "language bar" is not available on my toolbar option.

  tulipmelody, the links provided are order of registry editing which can be placed in the Notepad and run as a batch file.

  Before I provide you with detailed instructions on how to do it, I want you please check and make sure you have an additional language added to the keyboard settings, without him the language bar will not be an option in the menu of the taskbar.

  Add to James's message, follow these steps:
  Click Start-> Control Panel-> regional and Language Options.
  Click on the "Keyboards and languages" tab and then click on "change keyboards.
  Here the tab general, you need to add a secondary language to your keyboard, otherwise you will not be able to display the language bar. To do this, click Add and select the language you want to use, click OK.

  Once you have verified this, I can then provide you with more details on editing the registry. Of course, we want to ensure that it is not necessary first, as other options to resolve this problem. Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Update for Sierra and now my Apple music does not appear I have a subscription and I am unable to get my music on the cloud?

  Update for Sierra and now my Apple music does not appear I have a subscription and I am unable to get my music on the cloud?

  Hey there Scotchman2926,

  I understand that you are experiencing some problems with Apple music on Sierra. I have a few suggestions to help you solve this problem. First of all, if you are unable to access the iTunes Store as well as music from Apple, use the information in this article to help resolve this problem:
  

  If you cannot connect to the iTunes Store - Apple Support

  If this does not resolve the problem, you might try signing out of your Apple ID in iTunes and then connect again.

  Thanks to be come to the communities of Apple Support and let us know how it goes.

  See you soon.

• Unable to get airplay to connect to my receiver to my PC.

  Unable to get airplay to connect to my receiver.

  Are both the iOS device and Apple TV on the same wireless network?

  All devices receive their network via DHCP configuration?

  Is insulation wireless disabled on the router, at least for the channel that these devices use?

  Have you tried to reboot all devices including the router first?

  TT2

• Unable to get Netflix on Firefox 39. says "unknown Player error" already uninstalled and re-installed silverlight

  Unable to get Netflix on Firefox 39. says "unknown Player error" already uninstalled and re-installed silverlight

  Thank you for the presentation of reports. HTTPS Everywhere is a great idea, but many sites that are not designed for HTTPS, it causes these mysterious problems.

• Satellite Pro P100 - error message-"unable to get session notifications.

  Everytime I turn it on I get the error message "unable to get session notifications.
  What is c?
  How difficult or turn it off?

  Thank you

  Hmm... It looks like a 3rd party software notification.
  You may have removed (uninstalled) a program, but the registry contains some bad entries that cause this strange notification.

  You know the free app "CCleaner"? It repairs and cleans them registry and system files. Maybe this program might help to get rid of this message...

  Good luck

• I'm unable to get the registration code for my Blu - Ray player

  I'm unable to get the registration code for my Blu - Ray player. I followed the instructions and all I get is the statement: device is registered. I can't register for the most part without a valid code. Please let me know how I can get the correct code. Thank you

  If you were able to enter the registration code the first time you tried to save the player before then you don't need to do it again. Just bought this drive? If so, was it a screen or mixed open-box model?

• Unable to get the Bluetooth Toshiba BT Stac Headset profile in collaboration with mic

  Hello.

  I have problems with my Motorola HT 820 Stereo headset, the Toshiba Bluetooth Stack installed on Vista Home Premium 32 bit laptop.

  I am unable to get the microphone to work at all, so can't use it for Skype / VOIP calls etc. Features such as the A2DP and AVRCP work very well, and I can listen to music via the media player without problems.

  I read in a FAQ on this site, to make sure that I use the installation option custom rather than the quick installation when adding the device, but it seems to make no difference, am I missing a step here?

  In the properties of the device Windows registry, I see the option listed for Bluetooth Mic, but even assigning as device by default does not work.

  I know to plug my headphones on my desktop PC that uses the bluetooth stack Widdcom, can I use the headset/microphone function, but this battery seems to work differently, as I can select option headphones in the bluetooth settings, but I don't see such an interior option Toshiba stack - and I think that's the problem.

  I've updated to the last stack of Toshiba on this website, but this did not help at all.

  Here, any help would be appreciated.

  Concerning

  Matt

  Post edited by: Toxyturvy - wrong spelling

  Hello Matt

  Unfortunately I can't help you with that, but if I remember right here on the BT section that someone has already asked something similar. Please take a little time and see the BT section on this forum.

  You can also visit the FAQ section on http://aps2.toshiba-tro.de/bluetooth/
  Might find something there.

  Good luck!

• Unable to get GPRS settings!

  I am unable to get GPRS settings in my g2 moto...
  
  Help help...

  You can do it manually.
  
  Parameters-> wireless & network-> more...-> Mobile network-> access points-> press + in the upper right corner of the screen.

• Y510 unable to get data from the camera.

  Hello

  I have a Y510 with Windows Vista 32 bit, 3 GB RAM, only 5 weeks. I get this message when I try to use Veriface, "unable to get data from the camera. The camera may have been disconnected or busy. I reinstalled Vista of the State in which the laptop came, but it does not work. I also updated the bios and install other updates were available. I would appreciate any advice.

  Thank you

  Peter

  I wish it was as easy as press Fn + Esc, I looked through an another Y510 our office and managed to find a process that must be set to Auto, the process is KtmRm. This process cannot be disabled, handicapped, or on a time delay, it must be AUTOMATIC.

• loaded Microsoft combat flight simulator ww11 europe series. Unable to get game start with the joy stick. game with keybord works. gamepad is new logitech 3d pro extrem

  loaded Microsoft combat flight simulator ww11 europe series.  Unable to get game start with the joy stick.  game with keybord works.  gamepad is new logitech 3d pro extrem

  Hi Li-ngme,
   
  (1) have you installed drivers for the joystick correctly?
   
  It seems that the gamepad drivers is not updated for windows 7. Let us know if the gamepad work on other games under Windows 7.

  Try to access the link below and install the drivers for gamepad for windows 7 and even install as an administrator.
  http://www.Logitech.com/index.cfm/441/291&Hub=1&CL=GB, in? WT.z_sp = Image

  If this does not work, try to contact Logitech and check if they have updates on this for windows 7.
   
  ThaThanks and greetings:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• Unable to get the windows updates. Get error code 80072EFE. Help!

  Unable to get the windows updates. Get error code 80072EFE.  Help!

  Gary,

  ERROR_INTERNET_CONNECTION_ABORTED 80072EFE

  You may experience temporary errors related to connection when you use windows update or microsoft update to install updates http://support.microsoft.com/kb/836941

  by running the Fixit on this page, you can reset to windows update components.  but, if there is malware present, she will continue to reset the connection to the update servers: how toreset windows update components

  suggest you download and save the Fixit.  then conf is the boot vlean system before you run it:http://support.microsoft.com/kb/971058

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7http://support.microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native vista firewall is now on if a 3rd party firewall has been used previously.  now run the Fixit and choose the default mode.  restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode.  turn it back on when he finished the race and updates.

• I reinstalled Windows XP service pack 2-64 bit and now I am unable to get the Windows Update

  I reinstalled Windows XP service pack 2-64 bit and now I am unable to get the Windows Update. Updates are more automatic since the installation and now I get the following message if I try to update manually. Help!

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. For self-help options: Frequently asked Questions Find Solutions Windows Update Newsgroup To support options: Microsoft online assisted support (no cost for Windows Update issues)

  SP3 is only for 32-bit versions of Windows XP. OP has the 64-bit version of XP Pro...