The model resource management lots with the flexibility to order step
Hey, the people of Teststand. What is the best way in 2014 Teststand to do this? I'll implement test DUT 4 in parallel using the model of batch processing. The test sequence is in two parts. 2 DUT at a time can run part 1. While 2 DUT are testing part 1, I want to than the other 2 DUT to test of part 2. Then when they are done part 2, wait for part 1 slots become available and then run part 1. And these DUT who had run part 1 all first then work part 2.
Thank you. -Joe
Joe Czapski
Sonos
Boston, Massachusetts (United States)
As I understand it, a step of the automatic planning to the next level would be perfect for this:
Automatic calendar
Use Auto demand resources ("Part 1 - Slot 1", "Part 1 - Slot 2") / / these are two variants different resources
steps that part 1. Use the acquired lock output if you need to know what slot
End
Use Auto demand resources ('part 2 - Slot 1', 'Part 2 - Slot 2') / / these are two variants different resources
steps that part 2. Use the acquired lock output if you need to know what slot
End
End
Tags: NI Software
Similar Questions
-
change my model of producer consumer with different types of orders
Right,
Sorry I was not clear about that. I meant add the enum that I mentioned to the cluster.
-
virtual flash resources management is unable to recognize the SSD not (marked as ssd)
Hi all
In my lab at home, I am able to do with VMware vSphere Flash Read Cache (vFRC) practical, I don't have SSD on my desk.
In vmware workstation-11, I created a 5.5 esxi and added the local hard disk. It is an SSD not and I've marked as SSD.
in VC the reader is now considered ssd however in VMware vSphere resource management Flash when I click on add ability he is unable to see the SSD (not marked as ssd).
Any suggestions on how to turn it on.
Thank you
Vaibhav
As far as I KNOW, the SSDS should be visible as "local". You can run the command.
esxcli storage core device list -d
and check if the device is showing as local ssd >>
It was a disk formatted with the vmfs.
>>
I think that the disc does not have vmfs. Can you remove the vmfs and propose a normal, unpartitioned ssd drive
-
How to see the a ditamap topicrefs nested in the resource manager?
Hello
I use 12 FM. I'm trying to move a document of 500 pages with several chapters in Dita 1.2. I use a ditamap by chapter. When I nest ditamaps under a main ditamap using maprefs, I do not see the topicrefs of each card. Also, the subjects are not displayed when the PDF is generated. How can I make all the topicrefs appear in the resource manager?
Thank you
Stéphane
You do not see the topics in the section maps form the root card. When you open a map, you see the topicrefs for this card not the submaps. If you want to see the topicrefs, double-click the map reference and it will open the plan of the chapter. Maybe it's an interesting feature, but it doesn't currently work in this way. If you want to see all the topicrefs together, you will need to put them all in a single card.
The issue of topics in submaps are not included when you generate a PDF file sounds like a bug (or you have something set wrong). You can try to change the maprefs to topicrefs. A mapref is really just a special type of topicref, and the build process cannot be put in place to manage maprefs.
See you soon,.
.. .Scott
-
RH10: Excerpts from the Resource Manager display in search results
I'm new to using Resource Manager, so there is a good chance I did something stupid here... but...
I have 2 projects (I am the only author of technology, so running off a PC, any version control). I want to share snippets of code between projects, so I use the resource manager to keep them synchronized to the top. Both are compiled as CHMS.
When I search, I get search results that appear to be the code snippets in the results. When you double-click on them, they do not open.
Here is a screenshot of what I see.
Has anyone else seen this before? I use RH10.
I found it finally... somehow some of my clips appearing in the results of the research had found themselves in the baggage files. I had foolishly made express at some point in my project or not I have no idea. But the baggage of ditching apj file and replace it with a vacuum has solved the problem.
-
Error in the SMTP Configurations for File Server Resource Manager
Hello
Please help me how to configure SMTP for file server resource manager, when I have set up SMTP for gmail and godady e-mail I got the error.
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)* -
original title: NTFS problem
Every 5 seconds, I get a warning (event ID 136) that says: "on the volume C: default transaction resource manager encountered an error during startup and its metadata has been reset. The data contains the error code. »Immediately followed by an error (event ID 137) that says "on the C: volume default transaction resource manager encountered a one-time error and could not start. The data contains the error code. »
I am running windows 7 ultimate in any way to solve this problem?
Hello
This problem occurs if the Windows file system transaction log is damaged. The Windows file system uses the transaction log to retrieve the system transactions when a file error occurs. The system of common log (CLFS) transaction logs may be left in an inconsistent state. When the CLFS transaction logs are in an inconsistent state.
To resolve this problem, delete the files .blf and .regtrans-ms in the folder % Windir%\System32\SMI\Store\Machine.
After you restart the computer, the registry regenerates the deleted files. These regenerated files are in a consistent state.
1. click on Start , type cmd in the Search box, and then click cmd in the list of programs .2. click on run as administratorand then click continue.
If you are prompted for an administrator password or for confirmation, type the password, or click allow.3. at a command prompt, type the following command and press ENTER:
fsutil resource setautoreset true c:\
Note these steps assume that Windows is installed in the default location, drive C. If this is not the case, adjust the drive letter of the path of the folder to match your configuration.4 restart the computer.
I hope this helps.
-
Configure the resource manager
Hello everyone,
I try to activate the resource manager in the workspace Business Configuration in order to to use in my projects.
The State of the configuration is to inactivate. After putting and clicked OK, the status is always to inactivate and my changes have not been taken into account.
You have a solution please?
Thank you in advance!
Thomas
Try different types of browsers (IE or FF or CHROME), one of them works generally. If this is not the case, try to connect until system administrator (again try all 3 types of browser).
-
Hello
I am migrating an application from 3 APEX APEX 4.2 on a thing I noticed with the classic reports when I put them in the model 23, it's that the first section break has break notch under the headings of columns for this section of line while the remaining lines properly have it display above the headers on the subsequent sections of group.
When I look at firebug code I saw that all the tables but the first, the break line is included in the last line of the previous table, so I can see how it did not work for the holidays since.I have tow questions.
1. is it really intentional because it seems not terribly elegant and my users to zero immediately above as a perceived bug.
2. is there a reasonable job around always use headers repeat on break? I have multiple reports on the same page in places so switch to interactive reports is not a quick fix for me in this case.
Example of a question can be seen at apex.oracle.com at home
Thank you
Brad
Roadling wrote:
Hello
I am migrating an application from 3 APEX APEX 4.2 on a thing I noticed with the classic reports when I put them in the model 23, it's that the first section break has break notch under the headings of columns for this section of line while the remaining lines properly have it display above the headers on the subsequent sections of group.
1. is it really intentional because it seems not terribly elegant and my users to zero immediately above as a perceived bug.
The Standard report template definition in issue 23 contains
thead
andtbody
elements:Before the column header
Column title template
#COLUMN_HEADER# After the title column
After the lines
#EXTERNAL_LINK##CSV_LINK#This is intentional, the best practice for marking up HTML tables. What is not expected is the problem that arises when this model is used with the break of repeat titles on break formatting option. The repeated headings result table consisting of soup of tags containing several poorly constructed tbody and thead, which is not valid elements.
2. is there a reasonable job around always use headers repeat on break? I have multiple reports on the same page in places so switch to interactive reports is not a quick fix for me in this case.
Create a copy of the report model Standard in Standard (break formatting) for use with reports of the break, remove the
thead
andtbody
definitions of template tags and the breakdown of the reports to use the new model of change. (Or, if you use mainly break reports using the Standard template, keep the tags in the copy and remove them from the original in order to minimize the number of reports, you need to change.)Personally, I would create a report model of line custom to break complex reports in order to be able to have complete control over the structure and presentation.
-
OVD adapter Question using the model ' OAM/ADAM adapter with map.
I'm creating adapter to ADAM using model 'OAM/ADAM adapter with map' in 11.1.1.7.0 using DOHADOVD.
obpasswordhistory, obpasswordexpirydate, obLoginTrycount, and obLockouttime fields are not displayed in TPM. They are present in the ADAM instance.
Any thoughts on how to add these missing fields in TPM?
You must extend the schema of the OVD as well. You can refer to the documentation of production
http://docs.Oracle.com/CD/E27559_01/admin.1112/e27239/shared.htm#CFFEJEEE
-
Report model of column named with 2 lines/registration poster null in the top row
I was able to create a report model of column named with 2 rows by record type for a tabular presentation, but it seems to hide only the first line of the original registration and displays the 2nd row, i.e. all NULL values. All other records appear correctly.
Here is the HTML code for the page that results for the init_row of the report. I understand why he behaves this way, but I have no idea how to do the style of the first < tr > Reports to the 2nd line of the record.
Any ideas to try would be greatly appreciated. I tried to use conditions on the values of #ROWNUM #, but the null line is still there...<tr id="init_row_R1009150109271352230" style="display:none;" > <td rowspan="2"><a href="javascript:ShowRegion('')" >(null)</a></td> <td rowspan="2">(null)</td> <td rowspan="2">(null)</td> <td rowspan="2"><label for="f04_0000" class="hideMeButHearMe">Completion Date#ROW_HEADER#</label><span style="white-space: nowrap;"><input type="text" id="f04_0000" name="f04" maxlength="2000" size="12" value="" autocomplete="off"></span></td> <td>Premises</td> <td><label for="f07_0000" class="hideMeButHearMe">Vacant#ROW_HEADER#</label><input type="text" name="f07" size="5" maxlength="2000" value="" id="f07_0000" /></td> <td><label for="f08_0000" class="hideMeButHearMe">Delinked#ROW_HEADER#</label><input type="text" name="f08" size="5" maxlength="2000" value="" id="f08_0000" /></td> <td><label for="f09_0000" class="hideMeButHearMe">Soft Dt#ROW_HEADER#</label><input type="text" name="f09" size="5" maxlength="2000" value="" id="f09_0000" /></td> <td><label for="f10_0000" class="hideMeButHearMe">Ull Poi#ROW_HEADER#</label><input type="text" name="f10" size="5" maxlength="2000" value="" id="f10_0000" /></td> <td><label for="f11_0000" class="hideMeButHearMe">Ported#ROW_HEADER#</label><input type="text" name="f11" size="5" maxlength="2000" value="" id="f11_0000" /></td> <td><label for="f12_0000" class="hideMeButHearMe">Blocked#ROW_HEADER#</label><input type="text" name="f12" size="5" maxlength="2000" value="" id="f12_0000" /></td> </tr> <tr> <td>Path</td> <td><label for="f13_0000" class="hideMeButHearMe">Path Vacant#ROW_HEADER#</label><input type="text" name="f13" size="5" maxlength="2000" value="" id="f13_0000" /></td> <td><label for="f14_0000" class="hideMeButHearMe">Path Delinked#ROW_HEADER#</label><input type="text" name="f14" size="5" maxlength="2000" value="" id="f14_0000" /></td> <td><label for="f15_0000" class="hideMeButHearMe">Path Soft Dt#ROW_HEADER#</label><input type="text" name="f15" size="5" maxlength="2000" value="" id="f15_0000" /></td> <td><label for="f16_0000" class="hideMeButHearMe">Path Ull Poi#ROW_HEADER#</label><input type="text" name="f16" size="5" maxlength="2000" value="" id="f16_0000" /></td> <td><label for="f17_0000" class="hideMeButHearMe">Path Ported#ROW_HEADER#</label><input type="text" name="f17" size="5" maxlength="2000" value="" id="f17_0000" /></td> <td><label for="f18_0000" class="hideMeButHearMe">Path Blocked#ROW_HEADER#</label><input type="text" name="f18" size="5" maxlength="2000" value="" id="f18_0000" /></td> </tr> <tr>
And yes I know I should not use the tabular forms, but sometimes what is wanted, it is not what is better... :-)
See you soon,.
Greg
Published by: snowman on 4 December 2012 15:12
Published by: snowman on 4 December 2012 15:13See + {: identifier of the thread = 1116477} +.
Sorry, I forgot all that when I suggested that you can use a custom here report model (not surprisingly, since I did not use the tabular forms given that these changes have been made).
I don't remember see potential customization discussed in 4.1 or 4.2 (but then I would not have all these tabular forms).
If your options seem to be:
- Using nested tables as suggested by mark, who introduced the downside to Peter about the width of the columns (you can try to remedy using CSS to create fixed-width tables/columns, but my last experience of this receipt very messy in terms of support of IE cross-browser and legacy...)
- Build the page completely manually without the help of the features integrated in the form of the APEX.
- Try to customize the behavior of line add to take into account the layout is customized using the dynamics of the actions/jQuery.
- Do not use the tabular forms.
-
Question about the Oracle database resource management
Good evening
I have a question about Oracle database Resource Management (DRM) for Oracle Database 10 g. I had an incident which, in a development/UAT environment (different instances, same box, don't ask), a developer wrote a wrong SQL statement that consumed 99% of the CPU. Currently, there is no limit of resources on two cases of db, and the developers don't want limits. However, my manager wants a method to prevent something like this does not happen. If I use the Oracle database resources management, create a consumer group (called "DevEnv") at 40% CPU usage, what will happen if a user of DevEnv runs a bad SQL statement that normally consumes 90% CPU again? Anyone would take a different approach? Thank you.
Sincerely,
Sho Fukamachi782718 wrote:
If users in the case of "db_uat" use 60% CPU would be users who belongs to DevEnv pending 'db_test' cannot be used more than 40% CPU, so their queries become slower at their end? I would like to know if this behavior works the same in an environment of multiple instances. Thank you.Yes, because the available processor would be 40%, they use more, while.
-
The CPU used by the resource manager.
Hello
in 10g R2, I created a Plan for DBMS resources manager:
Now, SCOTT runs the following (example from 24 through the database manager):EXEC DBMS_RESOURCE_MANAGER.CREATE_PENDING_AREA(); EXEC DBMS_RESOURCE_MANAGER.CREATE_SIMPLE_PLAN(SIMPLE_PLAN => 'simple_plan1',CONSUMER_GROUP1 => 'mygroup1', GROUP1_CPU => 80,CONSUMER_GROUP2 => 'mygroup2', GROUP2_CPU => 20); ALTER SYSTEM SET RESOURCE_MANAGER_PLAN ='simple_plan1'; EXEC DBMS_RESOURCE_MANAGER.SWITCH_CONSUMER_GROUP_FOR_USER ('SCOTT', 'MYGROUP2'); EXEC DBMS_RESOURCE_MANAGER_PRIVS.GRANT_SWITCH_CONSUMER_GROUP ('SCOTT', 'MYGROUP2', TRUE); EXEC DBMS_RESOURCE_MANAGER.SUBMIT_PENDING_AREA; EXEC DBMS_RESOURCE_MANAGER.CLEAR_PENDING_AREA;
And CPU use goes to 100%. Why? According to its consumer group should not only have 20% of CPU?DECLARE m NUMBER; BEGIN FOR i IN 1..100000 LOOP FOR j IN 1..100000 LOOP /* * The following query does a cartesian product without * a predicate and takes up significant CPU time. */ select count(*) into m from v$sysstat, v$system_event; END LOOP; END LOOP; END; END; /
No explanation?
Thank you.Hello
user522961 wrote:
And CPU use goes to 100%. Why? According to its consumer group should not only have 20% of CPU?A quote from docs explained:
The currently active resource plan does not have the limits of the allowance until the CPU usage is 100%. If the CPU usage is less than 100%, the database is not related to the CPU and there is therefore no need to enforce limits to ensure that all the sessions to get their allocation of designated resources.
In addition, when the limits are applied, allowance unused by consumer groups can be used by other groups of consumers. In the previous example, if the SALES group does not use all of his allowance, the Resource Manager allows the group to MARKET or DEVELOP it group to use the unused allocation. -
Active control of vibration of the flexible mono-faisceau
Hi, im working on the active control of vibration of the unique flexible built-in beam, and I need to design that helps me control the beam active & passive.
two experiences of control a robot with unique flexible bond. The link is operated in bending by two piezoelectric glued to the surface, and the local curvature is measured by piezoelectric sensors, forming a pair of sensors/actuators colocated. In both experiments, the articulation describes the same polynomial trajectory that excites the Eigen modes of vibration of the binding. In the first experiment anti-vibration with piezoelectric actuators are off, and we can observe a very long time to maneuver as link oscillations themselves naturally. In the second experiment anti-vibration are lit, and a significant reduction in the time settling is reached
material
1 - nor cdaq-9178
2 - PS piezo
3 - piezo amplifier
4 inputs daq 9215
5-output daq 9263
performs one of the two substances vi my requirement
Cabo,
So, it looks like part of what you are trying to do is the generation control system a PID in LabVIEW. Fortunately, LabVIEW includes a number of useful resources for the PID:
Here is one of our books (with the tutorial files) whites, discussing implementations in LabVIEW PID: http://www.ni.com/white-paper/6440/en/
Here is another tutorial on implementing PID using the PID.vi: http://www.ni.com/pdf/labview/us/implement-a-pid-control-system.pdf
Here is the help documentation for PID.vi himself: http://zone.ni.com/reference/en-XX/help/371361L-01/lvpid/pid_vi/
Finally, example finder LabVIEW has a large number of projects example PID you can experiment with. Just go to help > find examples, then find "PID" and select any project matches your planned the best implementation.
-
Need help with the installation of the WebWorks tools order
Hello world.
Brand-newbie to your Forum and the development for the Playbook.
Developed software and Web, mainly as a hobby for about 15 years and more. A number of associates
and friends have Playbooks now, so I think trying my hand to redevelop some of my
old software for the platform of the Playbook. I plan to just using WebWorks for now.What I would appreciate, is some clarification as to the order of installation of the tools.
I have already installed ripple chrome just to get a peek at a few examples.
The ' tools' section to WebWorks watch ripple as the first installation, but I do know that I read somewhere
in the Forum that WebWorks should be installed "before" ripple. And if the ripple is already installed.
It must be uninstalled before installing WebWorks because of potential conflicts.So is this the correct installation order?
(Installation on Win 7 64-bit.)
1. install the SDK WebWorks
2. install VMWare Player
3. install the rippleI also remember reading a thread where some mentioned problems of compatibility with the 64-bit version of Java.
This box is running Java 7.0.90 - 64 bit.And finally, for the moment at least, what additional script libraries are the "must have".
Thanks in advance.
For anyone else looking for a similar response, check out:
By the same user.
Maybe you are looking for
-
Why my home page is reloaded when I select the private tab?
I opened Firefox menu to the right of the toolbar. Click on 'new private window' and it opens / reload my home page. I can br to a Web page, select 'new window private' & I get my home page. AND! There is no blue icon to indicate 'private window' hel
-
Profile Manager: set default browser on managed Mac
Run Server.app on OS X 10.10.5. Things are generally a lot. But there are two elements which, for the life of me, I can't find a .plist to: Default browser. Toggle natural scroll. We use Chrome, often against the guest account, which is annoying to a
-
Qosmio F60, PQF65A - how to play blu ray?
Hey people, I had huge difficulties in getting the blu - ray player to play blu - ray disc I've had this laptop second hand and all the manufacturer software has been uninstalled and I had to start from scratch. Currently, I have a Toshiba V3.01.1.07
-
My e-mail in outlook express receives only the subject line. There is no text in the message box. What is the solution?
-
Impossible to activate the user account control
Original title: user account will not My user account control has been turned off. Whenever I'm back on the computer needs to restart. However when it doesn't the user account is still once turned off. Any help welcome