Money 2007 does not open after Windows update

Similar Questions

• Outlook 2007 does not open after Windows Vista update 25 August 09 [Qosmio G50]

  I thought that it would be useful to others to post my experience just now.

  Yesterday (25 August 2009) my Outlook 2007 worked perfectly. I had downloaded & installed Outlook Connector 12.1 because I had received an email from Microsoft to say that the DAV protocol used for HTTP messaging would be withdrawn 1 / Sep / 09. I also noticed that MS had restored the POP3 service that they have closed a couple of years.

  Then I configured the POP3 account and started working with that. Everything is OK.

  Last night when I closed, Windows Update came and completed the reboot this morning. Outlook 2007 wouldn't start, coming up with the message: + cannot start Microsoft Outlook. Cannot open the Outlook window. Failed to open all the files. The information store could not be opened. +.

  Nothing that I've done in this environment would allow Outlook 2007 load, I created a new profile and who was not good.

  So I went back to the Restore Point system with the installation of Outlook Connector and everything comes to life.

  I tried also the restore point which challenge the update of Windows, but who does not cure the problem either.

  So, I'll see what happens when I reboot again, in the case where he had nothing to do with Windows Update.

  See you soon

  Very strange
  But maybe the Windows update was really responsible for this problem it is hard to believe, but it's not impossible

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software

• Satellite C50D-A-12 x - touchpad does not work after Windows Update

  the touchpad does not work after the windows updare

  I always recommend you read other threads / messages and spikes before considering opening new thread in the forum
  https://Forum.Toshiba.EU/showthread.php?82878

• Wireless does not work after Windows Update

  Original title: Wi - Fi internet connection is DISABLED since yesterdays upgrade, how can I get that back on?

  Since a windows update yesterday, before closing my laptop... I am not able to access the Internet.

  My without wire is off and I can't turn it back on.  Toshiba wants $99 for technical support.

  Hi Sheryl,

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  Wireless does not work after a windows update.

  1. what day that was installed?

  You can check the update in the update history:

  See the Windows updates are installed

  http://Windows.Microsoft.com/is-is/Windows7/see-which-Windows-updates-are-installed

  2. do you receive any error messages?

  3. What is the model of the computer?

  The problem may be with the drivers or with the device.

  I suggest that you refer to the procedure described in the site:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• Customer CC does not open after the update/installation

  Hello

  I tried to upgrade to the latest version of the CC customer, but when I try to open it after installing it does not open and only told me (in German) "the program is not open.

  Furthermore, I'm not able to open any other application such as bridge/Photoshop and Lightroom cloud without getting "Error 16".

  I tried several steps to find the flaw, but for example, there is no log file to find an error; I tried to install with firewall/antivirus off but the same message popped up. I also changed the access privileges, but the result was the same.

  I couldn't uninstall Adobe CC, because a message told me I still have other applications on my system.

  I didn't uninstall my programs before consulting this forum - there you have an idea?

  I'm on Mac.

  Thank you very much

  Thanks for your help - I'll make one last try or contact support technique adobe Monday.

  I found this thread 16 error while using applications of the suite Adobe CC 2015...

  and finally, it worked!

• Windows 7 does not open after the updates installed

  Help, please. Computer my son makes the automatic updates today and now it does not start. It takes me to the blue Windows screen then appears a box that says "System Recovery Options". It has two options

  Recovery tools 1-use by choosing an operating system (no present in the box). I tried this one and it did not work.

  2. restore your computer using a system image, which does not either even though I know he created images of system. Please any information would be greatly appreciated.

  Once I try these options from the dialog box get, with startup repair, System Restore, system image recovery, Windows memory Diagnostic and invites but not these wil do anything either.

  What can I do so that he could start over again what can I remove updates?

  Hello

  Disable automatic restart your computer and check if there are errors displayed when the computer does not start. To disable automatic reboot follow the link below.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Try the steps suggested by David Y post dated November 2, 2010 in the link given below and check if that helps.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/a6071159-db22-4076-b5d8-31f446dbdf32

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Office 2007 does not open after the Vista update

  Hello world

  I've been using a trial version of Office 2007 Standard supplied with my notebook for almost two months without any problem. Yesterday I updated to Vista x 64 and now I get a "the application failed to start because its side-by-side configuration is incorrect." pop up when I try to open any office program.

  I uninstalled and downloaded another version to test, but when I try to open Word or any other part of the office, I get the same error.

  Out of all the "" regular updates, it's the only one that is a new: Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update (KB951847) x 64 I guess this is the prob.

  I tried to uninstall Microsoft .NET Framework 3.5, but the uninstall program always, said: "Setup.exe has stopped working".

  Someone has any idea how to solve this problem?

  Thank you

  Here's an update. The two programs of Nikon not open as well. I don't know what other progs have been affected.

  -------

• Bridge does not open after windows anniversary 10 update yesterday

  Hello

  I upgraded windows 10 anniversary update yesterday.

  Bridge was then updated by Creative Cloud app.

  Since then, bridge cc will not open on the icon in the start menu and the icon pinned to the taskbar.

  I get the following error message:

  Adobe Bridge: Bridge.ex - bad Image

  C:\WINDOWS\SYSTEM\\igdumdim64.dll is not designed to work

  on Windows or it contains an error. Try to reinstall the program

  using the original installation media or contact your system

  administrator or support software provider. The error status

  0xc000012f.

  When I close this message Bridge opens!

  Strangely, it opens correctly & properly if I open cloud creative app directly

  I have disconnected & back creative cloud but it made no difference.

  Any ideas what to do?

  Thank you

  Mike

  Have you tried re installing (bridge?) as suggested by

• Laptop HP - 15-r213ns: hotkeys (keys of wifi sound, brightness), does not work after windows update

  Hello

  I have a HP laptop - 15-r213ns (ENERGY STAR) with windows 8.1

  Last night, after an update of windows, the shortcut of the brightness (F2 and F3) volume (F7 and F8), wifi (F12) and keys all others have stopped working.  I can always change the brightness and volume using windows, but I can't do more using the keys.

  The function keys are working, as refresh F5 or F3 Browse. I noticed that before I had to press the FN key for this and now she does without the FN + Fx, so I guess that the update of windows must have changed something here.

  They used to work fine before the update. I reinstalled the display drivers (NVIDIA G-FORCE 820 - M) and looked for new drivers or update drivers using HP Support Assistant, but everything is up-to-date.

  I was looking for hot key factors in the page of HP drivers for my product but could not find any keyboard, drivers or software related shortcut keys.

  any suggestions?

  Thanks in advance,

  Marco

  Hi, Marco:

  The system of the event utility is supposed to get the Fn keys to work.

  Details:

  This package contains the HP System Event utility for the laptop models running a supported operating system. HP System Event Utility allows the special programming function keys.

  File name: sp70439.exe

  You can find this file in the Software - Solutions section of the driver for your model page.

• Re: Satellite L500 - Wifi does not work after Windows Update

  The wireless on my Satellite L500 worked perfectly before you update windows. However, after the updat when you try to connect to a wireless connection, it says that "no connection is available.

  I then clicked on fix to try to find a solution. Then the message "the diagnostic policy service does not work. Using Ctrl + Alt + Delete I went on services and attempted to start the DPS manually, but the message "Diagnstic political service on Local computer started and stopped. Some services stop automatically if they are not in use by other services or programs. »

  This message puzzled me enough as it is said that the Wifi is infact on however in a attempt to FN + F8 F8 option does not appear. Any help would be greatly appreciated.

  Hello

  For Satellite L500, there are already some threads here in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=186764
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=178629
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=188577

  Additionally, make sure that the DHCP and DNS services are running. Type of startup is set on "Automatic" and try to restart both services.

• Z50-70: does not start after Windows Update

  Hello everyone, I recently bought a Lenovo Z50-70. Today, after a Windows Update, I restarted the laptop and now the led, but nothing happens. What could have happened?
  Thanks for any advice.
  Stefano

  stefanocsl wrote:

  I can't enter the BIOS because when I turn it on, I can't do anything. Also does not show the word "LENOVO" to boot, I see the light, I'm not the fan noise or HD by pressing the power button does not turn off, so it is as if she is still locked, turn off I have to hold more than 5 seconds

  Rather than go deep with solve the problem, it's better that you call support for repair or replacement (better) because you just buy the device recently.

• Monitor does not work after windows update failed

  After the recent updates on my computer Vista installation seemed stuck to update 2. I pressed the off button and he turned his back and now my monitor does not display anything, he spends just the analog to the digital looking for a signal. I tried the computer to another monitor with different tracks and it's the same thing. Can anyone help?

  Starting in recovery system (from the Vista DVD) options and do a startup repair.

  Startup Repair is a Windows Recovery tool that can fix certain system problems that might be preventing Windows to start. Startup Repair scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  Startup Repair is a recovery tools in the System Recovery Options menu. This set of tools is on your computer's hard disk and on the Windows installation disc.

  Reference: http://windows.microsoft.com/en-us/windows7/Startup-Repair-frequently-asked-questions

  If the startup repair does not resolve the problem, try other system recovery options:

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7 Man is the only animal that laughs and cries; because it is the only animal that is struck by the difference between what things are and what they could be.

• Help, INternet explorer does not work after windows update

  One day, the computer automatically downloads and installs the programs that are recommended by microsoft windows.
   
  After installation, my INternet explorer does not work.

  It reads:

  Windows could not access 'ie.redirect.hp.com '.
  Windows received an HTTP error message: 403 (refused).
  -> If this problem is consistenly prevent windows to connect to several sites on the Internet, contact your network administrator or your ISP.

  Then I click ok, and then try to go on 'www.google.com '.
  It still does not work, so I click on diagnose connection problems
  This time, it reads:

  Windows not found no problem with the network connection on this computer.

  You want to report the problem to Microsoft? Additional details about what went wrong can help create a solution. The report will be sent the next time you go online.
  Send information

  But when I send, I can not because I have Canon go online on my Internet Explore.
  When he first stopped working, I could use the system restore, but after a few months I dropped and now I can't restore the system to a place that it worked fine.

  I also know that this problem is not the administrator of network or something like that because I downloaded Firefox when IE stopped working, and Firefox works fine.

  I tried everything, but I can not do it by myself, so help please!

  @ceda only: See...

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows does not load after Windows update on January 8, 2010

  Basically, I've updated windows last night and is gone to bed and after I myself woke up and turned on the computer, windows won't load.

  There was an option to repair, but he says "Startup Repair cannot repair this computer automatically.

  So I ran the hardware test and everything was fine.  I tried to do a system restore... but it is come to the same, exact screen stating that «Startup Repair cannot...» ». I tried to run in safe mode and exactly the same result.

  I don't want to try to restore the computer to factory settings and lose everything I have.

  Help, please!

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include Error Codes, as appropriate, and exactly what happened when you did the update last night.

  In this way, you will receive the best help.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the worst happens, follow these steps below for data recovery before reinstallling:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner