moniter flickers on startup

Similar Questions

• Ultrabook: screen flickering on startup and close

  Recently, my screen flickers when my Ultrabook is turned on. There are multicolored lines on the screen for a few seconds before it turns blue.  This occurs very shortly when I close and sometimes, when the lid of the laptop is moved during the operation.  Once running it doesn't happen but if I moe the laptop as it sometimes appears. I'm not technical at all so any ideas what to do?

  Hello @sheilamilly,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I understand that you have a problem with the display and wanted to help you!

  For starters, can v OU give me the number of the product of the laptop?  Here is a link that you can use that will help you find your model and product number:
  How can I find my model number or product number?

  The display cable may be loose in the notebook.  Once I have the product number, I can provide the maintenance manual, that can help you with checking the cable connection.  Forward to your response.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Monitor flickers on startup

  I have a demension 1100 with an Acer 17' LCD flat screen monitor. At startup, the screen may flash once or twice, but does'nt turns on immediately. This can happen continuously until it is finally, after attempts multile start-up. After that, it works perfectly, until he is arrested again.

  Could be a driver issue... could be a monitor problem. Try to connect the monitor to another computer as a reference... Mike Hall MVP - Windows Experience http://msmvps.com/blogs/mikehall/

• flickering screen on startup after upgrade of macOs Sierra

  My kind of paper paints of glitters at startup.  It started to happen after I installed the new sierra of MacOs.  Help, please.

  You have your screen set to scale of 'space more?'

  

• Satellite L300-29R - monitor flickers on and off voltage at startup - Vista

  Salvation of Brussels,

  After turning the computer when the desktop icons are already visible and the background photo as well, the screen flashes black for about 1 second each time.

  Then it stabilizes and things "seem" normal work.
  But then again, I'm no expert. There may be other problems.

  I recently bought a new camera and it seems to me that the problem started after downloading the software.
  In the meantime I deleted it again but this blinking at startup of remains.
  What should I do? Please if no solution, explain to me as to a 'beginner '.

  Thanks a lot for your help in advance!
  IRIS

  Hello

  You mean that this problem may be related to software installed?
  Hmm. that would be very strange
  However, you can try to update the display driver

  The driver can be found on the European driver Toshiba page
  Take a look here, choose your phone model and update the driver

• startup error message: printer card transfer moniter has stopped working

  Thank you for your help.  I said that Microsoft will try to solve the problem... but the error message continues appeaering.

  Hi SIDDTHEEKIDD,

  1 when was the last time it was working fine?
  2 are you facing problems with the printer on the computer?

  It is possible that some third-party programs installed on the computer are causing the error at startup.
  I suggest that you perform the clean boot procedure and check if it works.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on Start, type msconfig in the search box and press ENTER.
  2. If you are prompted for an administrator password or for confirmation, type your password, or click continue.
  3. on the general tab, click the Normal startup option, and then click OK.
  4. When you are prompted to restart the computer, click restart.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• At startup, the Apple iMac logo flashes red after update to Mac OS Sierra

  After upgrading to Mac OS Sierra, my 2015 iMac 21.5 retina has a flashing red Apple logo, then a brief splash screen flickering when starting. Once started, the computer seems fine, with no obvious debris. I don't know why the logo flashes red and then the screen flickers - bad drivers; a problem of software in the start-up phase; a problem with the drive of the merger; or maybe some other gremlin? A quick search on the internet reveals that at least a few others have the same problem with this version of the OS, and it seems to have occurred in the years spent with any other version of Mac OS upgrades. But there is no good answers on how to fix this. I rebooted several times hoping it would clear itself, but no luck.

  Safe Mode boot removes the system caches that can help after an update or upgrade.

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

• Satellite A100-999 - screen flickers and goes black

  Hi, I have a problem with my Satellite A100-999.

  The screen flickers and then goes black. The works still laptop as I can connect to external monitors, but the laptop monitor are almost entirely black. It's happened before, but a reboot seemed to solve, however, Noah, as soon as the sign of the intel appears at startup, the screen turns off. It is not completely black - you can see the contours of some things on the screen, but it is almost completely black.

  Thanks for your help.

  Hi xiuxiuejar_1,

  HM, if you can still see a picture on the laptop external monitor should be ok and it must be a problem with built-in LCD screen.

  Usually, if the display is it black malfunction in UPS s FL which controls the backlight of the screen, but if the screen flickers, it s the internal LCD display itself

  I guess that your laptop is not under warranty more so I would try exchanging the FL inverter it's a lot cheaper. You can order this FL inverter of an ASP or eBay but is not so easy to replace, because you have to disassemble the laptop monitor.

• I'm getting flickering of software

  Hello

  Software on my machine began to falter. For example Firefox kind of flickers market very quickly every ten seconds. Other software also that. It is very sensitive in my music software when I have an open plugin. the pliugin sparkles, almost as if it was restratomg very, very quickly. Once again every ten seconds.

  Its strange, but I can't think of anything to try.

  All ideas

  Thank you

  Jamie

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode

  Safe mode - Mavericks

• Hourglass flickering in Windows XP

  next to my cursor arrow theres a hourglass than flickering... what for?

  Hi Juan,

  1. find the hourglass using any specific application?

  2 did you have any software or changes to the material on the computer before this problem?

  The hourglass in Windows XP is a Visual tool used to indicate when the computer is "thinking," commonly used when a program is loaded into memory. An hourglass which refuses to disappear after loading XP indicates a late start development program. Solve the problem by turning off unnecessary startup programs on your computer (this improvement of the speed of your XP machine in the process).

• HP banner on the top of the screen on startup

  Whenever I start my AOS counter top, I get a banner at the top of the moniter hp.  How can I stop this?  Thank you

  Hello

  When you say HP made banner refer you to HP Advisor/HP Dock?

  If it's the HP Advisor then try this:

  -Open HP Advisor > click Dashboard PC > on the bottom left, click settings> remove the check mark in

  "Launch of HP Advisor to Boot.

  Or,

  Click Start > in the Start Search box type in The Configuration system > click on System Configuration that will appear at the top > click on the Startup tab at the top > it will show you a list of programs > remove the check mark next to HP Advisor... .or anything that resembles the program you're looking for.

  You can use this method to disable any program you don't want to ride in the start. It will only disable start during the boot, but the program will still be there in the computer. Rather this method can actually speed up the start of your also.

• Acer Aspire 7739 G flickering screen scratched grey/white

  Screen flickers badly during the splash screen for a few seconds before I can't connect. Also flashes once I'm connected, but not nearly as bad and only every few minutes. The computer is about three years old and has never been dropped to do this.

  Video: https://www.youtube.com/watch?v=RXEJPLfLZLw

  If you move the screen or press the framework along or near the hing, the LED flashes stop?

  If you enter BIOS at startup, press F2, the screen flickers still?

• Pavilion 1297c p7: Moniter will not come

  After using my computer, it's in what I think is way 'sleep', I can't get the moniter back upon returning
  I can sometimes be completely extinguished and power with a fast push and the sign in screen is
  Right now that doesn't work do not
  I tried the f10, then f9 suggestion to another post but nothing you will get the screen lights
  I hear windows startup by no screen

  Hello @Rudyv,

  I understand that you are having problems with your monitor connected to your home PC HP Pavilion p7 - 1297c out the fashion 'sleep'. I provided you with a few steps, you can try below:

  Step 1. Unplug the power cord at the back of the screen and the wall
  Step 2. Press and hold the power button for at least a minute
  Step 3. Plug the power cable in the monitor, and then to the wall outlet (not a power bar or surge protector)
  Step 4. Press the Menu button on the monitor
  Step 5. Navigate to the factory reset option and select
  Step 6. Try different cables between your computer and your monitor.

  If the steps above did not resolve your issue, you can try the monitor on a computer or other device to see if the problem persists. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Thanks for posting on the HP Forums. Have a great day!

• My screen keeps flickering, no matter what I do. How to stop?

  The problem started when I first downloaded and started using RealPlayer, now my screen constantly flickers every 5-15 seconds no matter what program I use both. (Internet, Chrome, iTunes, etc...)

  How can I solve this problem / make him stop?
  First thing to do for a computer slow (or weird) should start to clean and see if an automatic startup program is the cause.
   
  Clean boot

  To see if other programs are causing the problem. Click on Start - Control Panel (and select Classic view in the left pane), select Administrative Tools , then System Configuration. Choose the general tab, and then click Start Diagnostics. Reset.

  Speed has been restored?

   

  The second thing is a virus check. This program is free and highly recommended.

  http://www.Malwarebytes.org/products/malwarebytes_free

  Use it as a scanner only.

• Compaq cq 56 display was scrambled and intensively flickering, now no display

  Hello world

  I have a computer laptop cq56 for nearly 1.5 years. Things were fine until like the last 2 weeks, the screen started to become scrambled, flickering, and now there is no display after startup. I got the system to the factory settings and still no luck. The system has no display in safe mode too: that is to say, when it is in safe mode, after it loads some pilots, the display flashes to a white screen. The screen was flashing even when I was doing the system recovery to factory settings. No problem of flickering / scrambled when in the BIOS. It will be great if someone could help me with this problem please

  Good day people

  Hello

  Go to the BIOS and move around the screen. The spectacle of the question?

  You use an external monitor for updates to update and recovery?