monitor_contended_enter and monitor_contended_entered with JNIEvn calls

Similar Questions

• Concerns about 911 (and equivalent) with WiFi calling

  I'll take my iPhone to the United Kingdom for a few months and then Israel.  Roaming charges 'works' are crazy, so I'm leaning toward disabling homelessness and by using the Wifi calling feature, because I have Wifi most of the time almost every day.

  What worries me and I wonder if others share it: If a person has a heart attack on the sidewalk next to me, I needed to go to the options, re - activate roaming (three or four clicks...), wait for it to connect and then try to remember versions UK or Israel of 911 (for someone who is curious the United Kingdom uses 999 for ambulances, but the 112 for fire and other emergency situations; Israel uses 100/101/102 (police/ambulance/fire brigade), but in theory, they are also used for 911 112 or even, as we do in the United States).

  Why isn't Apple just automate all this?

  At the present time their Wifi calling already wants to keep me my updated location.  Instead, they might have an option "use Wifi with the exception of emergency situations, wandering around in case of emergency only".  So, if I'm in the United Kingdom and call 911, they may have a version of homelessness that ONLY uses the roaming network for 911 calls and automatically use the right number of premises too.  So I would use Wifi roaming, that emergency calls would actually work without messing with the options tabs and waiting to reassign to a local provider of the phone company.  The phone would actually get on the go, but would not accept incoming calls or send outgoing calls on the roaming provider: he would use Wifi calling for that and for texting and would only use the mobile carrier for 911).

  ProfKPB wrote:

  for anyone who is curious, the United Kingdom uses 999 for ambulances, but 112 for fire and other emergency situations

  To clarify:

  National emergency services number of the United Kingdom is 999 - including to call police, fire and ambulance.

  If you prefer, 112 can be made instead to the United Kingdom for the same purpose (112 can be used throughout the EU).

  https://www.gov.UK/call-charges

  https://EC.europa.EU/digital-single-market/en/112-United-Kingdom

• I use airplane mode on my iPhone 6, with wifi and I still receive calls. I don't want to. How can I change?

  I use airplane mode on my iPhone 6, with wifi and I still receive calls. I don't want to. How can I change?

  -do not disturb - the settings on

• I play world of warcraft and use a program called ventrilo to talk with other players. the problem I have is my game sounds can be heard

  I play world of warcraft and use a program called ventrilo to talk with other players. the problem I have is my game sounds can be heard.
  Vista makes my headphones 'speakers', so when I use a program called ventrilo to talk with other players in my game sounds are heard through ventrilo. My headset is a headset/microphone generic plug-and-play.

  When I run not WoW, I can hear my own voice through the headset speakers when I talk.

  I want my headphones to work so I can hear my friends talking and the sounds of the game, but I don't want the game sounds to be filtered on the server for voice chat

  Any help would be much appreciated. I asked the same question to Geek Squad and their response has been to try to charge me $49.99 + tax for one of their "agents" can remote in and fix it. Do not use them unless you have: P

  Hey CassiusVa,

  Welcome to the Microsoft Answers Forum!

  Since when are you facing the issue?

  Can I know the version of Ventrilo you use on your computer?

  It may be that World of Warcraft focuses on your audio hardware.  You can try to reduce the audio settings in WoW to see if this makes the use of Ventrilo better.  It may also be a driver problem.  I would check to make sure that you have the latest drivers for your audio device.

  Use the following steps to ensure that the audio drivers are up to date.

  1. connect to the Internet.

  2. click on start and enter the Device Manager in the start search field.

  3. click on the plus sign next to sound, video and game controllers.

  4. right click on the name of the sound material and select software update of the driver...

  5. click on search automatically for a driver updated and wait for Windows to update the driver software.

  6 Windows checks a remote Web site to see if the update of the driver software is available.

  * If an update is available, let Windows install the update.

  * If an update is not available, proceed to the next step.

  7. once the update is successfully installed, test the microphone.

  Please follow the steps below and check if you still have questions echo.

  Go into Ventrilo Setup and select mixer for the sound card, which will be the audio input (as determined by the "Input device" option) device. This will populate the Mux and line options. Normally it would take only a Mux. It is possible that you may have many options of the line. Go ahead and select "Microphone" or anything that is appropriate for the input line and then click OK.

  This should solve the problem.

  Please note that you select mixer, mux and line will allow the "Hardware Volume" slider This gives you the control hardware on the audio input signal and is the best way to control how strong you are. Setting the cursor to halfway better seems to work for most people, but it will be hardware and system load.

  You can also browse the links for more information on ventrilo and try to contact them if the problem persists.

  http://www.Ventrilo.com/FAQ.php

  http://www.Ventrilo.com/about.php

  http://www.Ventrilo.com/dlprod.php?id=1

  Let us know how it works.

  Kind regards
  Technical support of Microsoft-yama.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• A message from Firefox that Serw.Clicksor.W32 has infected my computer and asked me to call the 1-888-862-6483. Who is this?

  I saw this message two times on my computer, it comes with Firefox logo and asked me to call this number. I didn't call, I did a scan on my computer but nothing showed up.

  This could be a scam caused by malicious software on your system. Firefox itself does not analyze malware and are not asking you to call a phone number to solve the problem.

  Firefox protects you from known malware and phishing sites, but which has a red background with a bet caveat

  • https://support.Mozilla.org/en-us/KB/how-does-phishing-and-malware-protection-work
  • https://www.Mozilla.org/Firefox/its-a-trap.html
  • https://www.Mozilla.org/Firefox/its-an-attack.html

  Find and remove malware
  
  Follow the instructions in the link below. Download (FREE versions) scanners, update (signatures), close your browser and scan. This with as many scanners as possible. Is not all malware scanners detect the same elements/malware; it depends on their signatures. Therefore, you must run multiple... As a last resort, you can get online help to remove malware at one of the forums at the bottom of the article.

  • https://support.Mozilla.org/en-us/KB/troubleshoot-Firefox-issues-caused-malware

• Using a counter with FiniteSamps and one with ContSamps

  I am using 2 counters on the NI USB-6229 (or USB-6259), case where a counter is implemented for FiniteSamps and another for ContSamps. I have the following MeasurementStudio code:

  ErrChk DAQmxCreateCOPulseChanTicks(hCnt0, "Dev1/ctr0", "", "20MHzTimebase", DAQmx_Val_Low, 0, 400, 400);
  ErrChk DAQmxCfgImplicitTiming(hCnt0, DAQmx_Val_FiniteSamps, 100);

  ErrChk DAQmxStartTask (hCnt0);

  ErrChk DAQmxCreateCOPulseChanTicks(hCnt1, "Dev1/ctr1", "", "20MHzTimebase", DAQmx_Val_Low, 0, 400, 400);

  ErrChk DAQmxCfgImplicitTiming(hCnt1, DAQmx_Val_ContSamps, 2);

  ErrChk DAQmxStartTask (hCnt1);

  When I run it, I get an error-50103 "the resource specified is reserved". If I change the FiniteSamps to ContSamps on the first counter, everything works fine.

  If I use only one counter with FiniteSamps, everything works very well.

  Is this a bug in DAQmx or the use of double counter on M Series devices is limited to ContSamps?

  VIC

  Hey Vic,

  It is actually planned on a device of the M series.  Here's a time diagram of the M Series user manual which might make this a little clearer:

  

  The device uses actually one counter for the other door so the result is a generation of finite pulse.  If you can provide the door from another source, you can configure a generation of continuous pulses on two counters and their door (DAQmx calls it a "relaxing break") of this external signal.

  You can also look at the use of the digital I/o correlated to generate impulses over multiple (up to 32 lines on your 6229 and 6259).  You could use one of the counters to generate a time base for digital lines and build the waveform as a result.

  One thing to note is that our new X series cards can generate a generation of impulses finished on a "single" counter (it was actually a paired internal counter that allows this).  There are four accessible counters by the user on the X series devices, which means you could generate four pulse trains finished.

  Best regards

  John

• Error 50103 - simultaneous analog Vout and wine with start of analog triggering

  Hello

  I'm stuck error 50103.  I looked on the Web site of NOR and worked through the 7 cases and think that my problem is the 6 case - although I'm not sure - and have no idea how to fix this. Basically, what I would do is out my signal and have receive side save after it passes through a noisy channel. To start, I have attached a trigger control so that the transmission or recording start before the input trigger exceeds a certain value (in my case, 3V).

  Could someone please look at my code (attached, called 'Optical_DPPM_V3.vi')) and try to give me an indication as to what I'm doing wrong? Thank you!

  Furthermore, I use examples of OR that I have also included in the .zip for reference file.

  SP

  P.S. hardware: LabView 8.2, NI PCI-6070E

  Hi gt3000,.

  Thanks for your reply. I actually solved the problem I called one of your offices directly and spoke with someone last night.

  Indeed, the problem was "case 6" as it is stated on the page you gave. "." When I spole with one of your colleagues, I was directed to an example that does most of what I wanted. If anyone is interested, you can follow this path to find:

  Help--> find examples--> material input and output--> DAQmx--> synchronization--> multifunction--> multi-function Synch AI - AO.vi

  It seems that the trick is to use an internal digital triggering to synchronize the CLK for VI and VO.

  If people are interested, I can send my final code around for a differential pulse modulator, triggered by an external analog voltage which the receiver registers and stores the values in a worksheet. My next goal is actually write the code for the receiver to demodulate information... here go us!

  Thanks again,

  SP

• Problems with incoming calls not being recognized

  I have a motorazr2 V9m.

  Can I use any phone and call my motorazr2 V9m.

  The call will not be displayed on my motorazr2 V9m.

  On the phone, I'm calling from the call will ring until voice mail rises.

  A voice message on the motorazr2 V9m notification will pop up sometimes immediately or later.

  The voicemail notification pop up of time varies. Sometimes it will not show up until you try to make an outgoing call.

  I can call the other phone several times and the motorazr2 V9m will not display a call.

  I'll try 5 or 6 times before the motorazr2 V9m will show and ringing an incoming call.

  I tried this in many places with the same result.

  Any suggestions?

  Thank you

  Looks like a reset did the trick.

• HP 550: updated hp 550 memory and cpu with the unconventional settings. is not ideal, but not other choice

  HI guys, I hope you can help or at least give a point in the right direction. I am a freelance photographer with a large part of the suite creative Adobe CS6. After a disaster of a week, I came home to find the motherboard on my editing station is fried somehow. I don't know what happened though I wouldn't put past my inattention of roommates.
  I'm desperate. I have to finish my current job until I'm able to afford to buy a replacement. So I have to rely on stop-gap measures, in desperation to finish my project, that are less than ideal, but so far are doing better than I'd hoped.
  Im a photographer, Capture One, Adobe Photoshop Lightroom, Adobe Photoshop and Premiere Pro are the go for workaholic applications that I need to work. without them I have no income. in order to have this machine run these applications,
  the machine I have left is an old hp 550 that was gathering dust in the closet. It was built for 32 bit Win XP and in no case is designed to run adobe products food pork I use, particularly of Lightroom.
  Unfortunately PS with Lightroom and first are 64-bit programs and LR and first are hyper threaded. so I did some research and with the help of the list of the utility windows 7 Advisor to upgrade instructions, I was able to get windows 7 Pro 64-bit to install and run.

  I know that this is not the ideal machine or the situation, but for a few weeks, I need to make it work.

  I really just 2 simple questions. First of all, I went to the HP technical support. but they were not useful. as the guarantee of the laptop are long gone, they would be not even polite and basically told me to shove off. Then on another forum, I called back and comes with a knowledge it all who constantly insisted on the fact that there was no way no how this pc could run 64 bit win 7, which i thought what am I seeing things? It works very well for 3 months. So I decided to come to you. your forums were useful on many occasions.

  Basically, I need this machine to run these programs during the next month or two, until I can buy a new machine.

  essentially, what I want to know, it's the motherboard support an upgrade of the processor? and if anything goes, what do you suggest as a substitute, given my needs? The Core 2 duo is the bare minimum of what I can limp with like photo/video rendering times are excessively slow.

  then I was talking to the support staff essential tech upgraded memory. and possibly set the bios to force to run 8 gigs of ram. They said that they have cold cannot find any version of bios that would make that possible, but only by forcing already run 64 bit, which has already allowed the pc to use the full 4 GB of ram, which was impossible in the 32-bit format. He suggested that I buy 2 4 gig modules such as 4 GB DDR2 PC2-5300 unbuffered NON - ECC, 1.8V 512Meg x 64 which can be seen at http://www.crucial.com/usa/en/memory/ct51264ac667 and try to install the full 8 concerts and see what would happen, saying that he had a feeling that I might get lucky. his logic is that the 64-bit system already open the ram limits and who knows, you can't make an omelet without cracking of eggshells! It seemed very optimistic. So, what do you think? It seems likely you because I love to work. or do you think the guy was a quack? and this whole endeaver is a waste of time and money?

  also, any other suggestions on how to time this month long storm that do not involve suggestions of buying new machines would be appreciated!

  so that you have accurate details below are my system specs.

  Hewlett-Packard HP 550 F05
  System serial number: CNU90716GN
  Inventory number: CNU90716GN
  Chassis serial number: CNU90716GN
  Case type: portable

  Windows 7 Professional (x 64) Service Pack 1 (build 7601)
  Install language: English (United States)
  Local system: English (United States)
  Installed: 04/08/2014-18:21:11
  Start mode: BIOS (Secure Boot not supported)

  Processor and b main circuit
  1.80 GHz Intel Core2 Duo processor
  cache of 64 kilobytes main memory
  secondary memory 2048 k-cached
  64-bit ready
  Multi-core (2 total)
  Not hyper-threaded Board: Hewlett - Packard 3618 KBC Version xx.xx
  The bus clock: 200 MHz
  BIOS: Hewlett-Packard 68MVU worm. F05 19/01/2009

  Readers of memory Modules c and d
  2320.47 GB drive hard usable capacity
  959.16 gigabytes of free disk space

  HL-DT-ST DVDRAM GSA - T50L ATA Device [scanner]

  Hitachi HTS543216L9A300 [hard drive] (160,04 GB) - drive 0, s/n 090108FB0200VCCPYM3B, rev FB2OC40F, SMART location: healthy
  ST1000LM 024 HN-M101MBB USB Device [hard drive] (1000,20 GB) - drive 3
  ST310005 USB Device [hard drive] 28as - 1 player
  WD 1600JS external USB Device [hard drive] (160,04 GB) - disc 2, s/n WD - WCANM2342148 4088 usable MB installed memory

  Slot ' DIMM #1' has 2048 MB (serial number 0000202 A).
  Slot ' DIMM #2' has 2048 MB (serial number 00004042).

  Thank you friends! I can't wait to read your tips!

  Jodie

  Here is the Manual:

  Repair manuals

  Unfortunately, the maximum configuration is a processor T5670 1.8 ghz and 4 GB of DDR2-667 memory, you already have. The CPU includes the 64-bit instructions is not surprising, that it can run Windows 7 64-bit. My best advice is to save your money for when you can get a real working machine. The only other likely to help is a solid state drive, you might use in the laptop and then also use the new computer that you intend to buy.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• I need to find and kill a virus called hckr\.exe who attacks my registry keys. How can I get in the registry keys so I can kill him?

  Somehow August 2, someone was able to successfully plant a virus on my computer. My antivirus software has been able to kill most of it, except for one thing. That something is called hckr\.exe and it attacks my registry keys and IE I have a broken file association system completely affects all skills of my computer to recognize are own programs. I need 1. > find and destroy this program hckr\.exe, 2. > remove any embedded backup files and 3 > restore my registry keys and files association system so that my computer works correctly. Please, I could really use help until I don't have a computer on the left.

  Hello

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  --------------------------------------------------------

  Check with:

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------------------------------

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp?prevx=Y  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  -----------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  RUN - type in the box-

  sfc/scannow

  Then run checkdisk (chkdsk).

  RUN - type in the box-

  Chkdsk /f /r

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 for virus and spyware help
  infections. See http://www.microsoft.com/protect/support/default.mspx for more details. For
  international information, see your subsidiary local Support site.

  Microsoft support - Virus and Security Solution Center
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#TAB0

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• No voice with incoming calls PAP2T

  I bought a LinkSys PAP2T unlocked last year that worked beautifully until a few days ago. Outgoing calls work fine, but I now have problems with incoming calls only.

  When I receive an incoming call, the phone rings, but when I pick it up, I can't hear anything and cannot the caller on the other end. After a few seconds, my phone disconnects and begins to beep as if the line is busy. This occurs regardless of who calls me and whther they use a VoIP device or a normal PSTN phone. I have not changed the settings on the router (a Belkin) or the PAP2T, he simply stopped working a few days ago! I have a connection 10MB Virgin Media broadband service for my VoIP provider is Draytel that have verified the account and settings and says it works very well on their test kit.

  Since then, I tried just using line 2 and the deactivation of line 1 to do a hard reset of the PAP2T and updated the firmware to the latest version. Even tried to change the analog phone connected, but I still have the problem.

  Does anyone have any ideas as to why it suddenly stopped working with anything has been changed and what I might be able to do to fix? The PAP2T is still the title of the 12 month warranty period then maybe she developed a fault?

  Thank you very much in advance for all those who can help you.

  Cheers, Vic

  For me it looks like the problem of RTP streams - probably, it does not pass the firewall / nat on the path between SIP provider and you.

  This may have is that your Belkin router/NAT, or on internet ISP router/NAT enabled SIP ALG (Application Layer Gateway).

  If this is the case, you will need to disable SIP ALG on your router or ask your ISP internet to disable on the firewall router.

  Another question may have been if you (accidentally) changed the port forwarding on your Belkin router, or the PAP2T local LAN IP address changed and port forwarding is no longer works.

  So my proposals to check:

  -check and DISABLE SIP ALG on your Belkin (if the router has this feature)

  -check the port forwarding on your router Belkin... IF you set up port forwarding for 5060/61 you MUST set the same for RTP ports (16384-16483)

  -If you don't have port forwarding on your Belkin, try before installation of 5060-5061 AND 16384-16483 *.

  * (If this is too many ports, set the RTP on PAP2T portrange to 16384-16394 for example and then forward only go)

  -If neither of above of aid, change your SIP Line1 of 5060 for port we will tell 6070 and RTP ports to the beach we'll tell 17300-17310

  -Finally, you can do it on your side is to remove all the port forwarding and put the PAP2T to your router Belkin DMZ settings.

• Xperia Z3 and Z3c distorted voice calls when connected to WIFI

  I bought a Z3 Xperia, the device, but faces a MAJOR problem with voice calls distorted when connected to WIFI of love. The person across the call I can hear fine, but on my side of the call line is all distorted and blurred. If I turn off WIFI or disconnect WIFI then voice call works perfectly well. This problem only occurs when I am connected to WiFi. There seems to be several reports of this issue on the forums of Whirlpool and mainly for Optus customers. Xperia Z3c my partner is also having the same problem. I returned a Z3 because of this issue and received a replacement, but the problem persists on the replacement so I think that there is a software problem that needs attention and needs to be repaired as soon as POSSIBLE!

  This is a common problem again, Sony have yet to get their act together to solve the problem. very bad support indeed... and its happening on virgin too because that Virgin uses the cell of the optus towers

  EDIT: Just noticed an update is available on XperiFirm (23.0.1.A.5.77) available for the custom/generic to THE D6653. I hope that this solves the problem, as it seems to be a major release version. Download, flash and report.

  

• When I start my computer, I get a screen that tells me the EULA has expired and I need to call the computer of the company rented to renew, however is not a rental?

  When I start my computer, I get a screen that tells me that the CONTRACT has expired and I need to call the company, that the computer can be rented to renew, however is not a rental? I have no idea what this same refers to, however, it gives me a password to enter, tells me that I have to wait 10 minutes, then it resets a chipset and allows the computer to, and then starts. I can't even take a screenshot of this message, because what it comes to control over the computer. I've scabbed virus and comes back clean. All this shows is a name of agent: HLZR4G1, then the Version 5.6.5 (Build-a-1028). The password was Wanker that seemed fishy, now the password is numbers and letters. Can someone explain this to me?

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  make it work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• New HP x 2301 display alternative lines of type NET and blur with Word, IE, Firefox, etc.

  I have connected this new HP x 2301 to an old HP Pavilion a1730n CPU which worked well with my old HP display.  Keyboard is HP.  The alternation of lines crisp and fuzzy type appears in anything that contains text, such as Word documents and windows Firefox and IE, incluing gmail emails. I tried to unplug the power cord screen and pressing the power button / display for 45 seconds before restoring power, but there was no change.

  Here are the specifications of your desktop HP Pavilion a1730n. According to specifications, your using nVidia GeForce 6150 graphics built-in and supplied with Windows Vista 32-bit. Here are the specifications of your HP x 2301 micro thin LED LCD monitor. According to specifications, your monitor supports a resolution native, recommended and maximum of 1920 x 1080 at 60 Hz. Please make sure that Windows is on the nattive of your monitor resolution and 32-bit color is chosen. Windows includes a technology called ClearType that allows your monitor display fonts of the computer more clear and smooth as possible. To adjust ClearType, type 'ClearType' in the Windows Start menu search box, or go to control panel. Follow the prompts to refine the way text looks like.

  If using the integrated graphics VGA output, I recommend the upgrade to a graphics card that supports the DVI or HDMI. This should make the image look better overall. A new x 16 PCIe graphics card may also require an improved power, depending on the currently installed unit and your chioce of graphics card.

• SX 20 with Cisco Call Manager

  Dear team,

  If I add the SX20 with Cisco Call Manager, do I need to install the software cmterm - s52010tc6_2_1.cop.sgn the SX20. If this isn't the case, then what I have to do, I can see only administrator external field in my SX20, where I gave my callmanager IP address but it is not save.

  BR

  Hello

  In order to save the SX20 in CUCM you for CUCM version 8.6.2 or later, and your SX20 must be running TC5 version or a later version.

  This file you mentioned, cmterm - s52010tc6_2_1.cop.sgn, is just a upgrade file that you install on CUCM, so that CUCM can update your point of SX20 endpoint automatically. But you can upgrade your SX20 manually using the file s52010tc6_2_1.pkg.

  To get help on how to register to CUCM SX20, take a look at these guides with the name "administer endpoints TC on CUCM". The Guide according to the version of CUCM you run:

  http://www.Cisco.com/en/us/partner/products/ps11424/prod_maintenance_guides_list.html

  I hope this helps.

  Concerning

  Paulo Souza

  My answer was helpful? Please note the useful answers and do not forget to mark questions resolved as "responded."