Monitor laptop broken - HP Pavillion 1173dx with limited warranty g7
I have a HP Pavilion g7-1173dx. My operating system is Windows 7. A few months back, my laptop screen was broken accidentally, but not by me. I was in my school library is about to do my homework before I had to go to class, and my cell phone was on the table in front of me when the cover is opened. Someone walked by they were shooting their schoolbag, and as they did, they hit my laptop and the cover closed when it hit the ground. He picked for me and asked excuse me and went on his way. When I opened it, the screen was broken and he has a crack at the bottom. I called customer service on this topic several times. I don't want to pay to get it fixed because it wasn't really my fault. So, can I my laptop fixed with the limited one year warranty that comes with the laptop or not?
Too bad, it's not. Just buy a Dell.<>
Tags: Notebooks
Similar Questions
-
my monitor plug broken off on s5703w slimline motherboard, anyway to fix this?
Hello, my monitor plug broken off the turntable on the computer. It's a pavillion s5703w computer. I don't see a way to fix this without having to replace the Board of Directors, which consist of the entire computer. Any suggestions?
Thank you
Hello:
Yes, there are... Get a good video adapter.
For your video card, you must use a map of low profile with a slim-line mounting bracket, who works within the constraints of your 220W P/S.
It should work just fine. You will need to remove the regular profile card comes with and replace by the low-profile support included in the box.
http://www.Newegg.com/product/product.aspx?item=N82E16814127550
He goes into this black slit longer parallel at the bottom of the image below.
Here is the service manual if you need know how to get inside the PC.
http://h10032.www1.HP.com/CTG/manual/c01949721.PDF
This card comes with an HDMI port output, which means that you may lose your onboard video after that you install.
If this occurs, restart the PC after installing the card and press the F10 key to access the BIOS.
Find the onboard audio setting. It will have the value Auto or disabled. Change the setting to Enabled here and press the F10 key to save the setting, and again, when you go out (save the settings and exit).
When you restart the PC, integrated audio system needs to be restored.
Paul
-
I have a laptop HP which I use with an external monitor as your desktop put in place. I have no problem with the standard choice working about the poster. However, I would like to than the main office (Start menu and shortcuts) to display on the monitor external and my laptop at the extended screen display. I came across ideas in the research of the object, but most of them is based on earlier versions of Windows and not Windows 7.
I have a laptop HP which I use with an external monitor as your desktop put in place. I have no problem with the standard choice working about the poster. However, I would like to than the main office (Start menu and shortcuts) to display on the monitor external and my laptop at the extended screen display. I came across ideas in the research of the object, but most of them is based on earlier versions of Windows and not Windows 7.
Hey English2Go
Here is the vista forums
Try the forum Office windows 7 the link below
http://social.answers.Microsoft.com/forums/en-us/w7desktop/threads?filter=AllTypes
Walter, the time zone traveller
-
Wireless Internet with 'limited access '.
I tried to connect my new laptop Dell Vista to our network wireless at home. After many unsuccessful attempts (due to an unknown "logon doamin") I was finally able to connect to our server, however, with "limited access". Despite having "limited access" internet still does not work. Is anyway to solve this? We currently have two other laptops that work well on the wireless network.
Hello
Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
Update your WiFi drivers on computers. How you are positioned in the router? Are there
obstacles in the path? Make sure that the computer is trying to connect to the correct router as there may be
another strong signal near her.Other Vista computers? You use the WPA/WPA2 security?
Actually try updating your driver and disabling the network logon. Use a wired connection or download
pilots on another machine and transfer on removable media.Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
manufacturer of system become your backup policies).Repeat for card (NIC) network and is a good time to get the other updated drivers as Vista like
updated drivers.I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
are almost always old, and you can search drivers manually as needed.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx------------------------------------------------------
Make sure you know the details of connection to your wireless router - SSID and password.
You lose connection when you do and have to redo your logon.
Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
lower left click on merge or delete network locations - REMOVE all instances of your network (and the
others you don't use anymore) - REBOOT. Start - Connect To log on to the network.-----------------------------------------------------
Check this box:
Strange problem with Internet under Vista
http://www.catonett.com/blog/archives/194Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
http://support.Microsoft.com/kb/928233/en-us----------------------------------------------------
And:
Network connection problems
http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Windows 8 Pro transfer laptop broken again laptop w / Windows 8.1
Hello, I was wondering if it was possible to transfer my Windows 8 Pro license (from a cell broken that came pre-installed with Windows 7 and then upgraded to Windows 8 Pro then 8.1 Pro when the update became available) to my new laptop.
I still have the product key as well as the reception of the digital purchase of Windows 8 Pro.
I currently have a new laptop that came pre-installed with the basic version of Windows 8.1.
Thank you in advance.
Edit: I'm hoping to do for Windows 10 pro once it is available.
Hi Juan,
Thanks for posting your query in Microsoft Community.
The task you're trying to run is possible if you have formatted the drive in which you installed Windows 8 Pro and then install Windows 8 Pro on another computer and use the same product key to activate the operating system. You will only be able to activate using the same product key, if you try to install the same version of Windows operating system. This activation can be done by phone.
For more information, see the suggestions provided by Rajesh Govind and Andre Da Costa in the Microsoft Community link.
It will be useful.
Please let us know if you have further questions about Windows. We are happy to help you.
Thank you.
-
I closed my laptop (Macbook pro 2012) screen with a day and immediately after 30-40 minutes his does not starts once again.
Hello Varshil07,
Thank you for using communities of Apple Support.
If I understand your message, by updating your Mac you have forced stop, or you have closed the lid, and now it does not start. To start, I suggest that try you to start in safe mode by following the instructions below. For later use, it's a good idea to not force the computer to shut down or close the lid while it is up to date, because it can cause problems.
Choose the Apple menu > shut down.
After your Mac stops, wait 10 seconds, then press the power button.
As soon as you hear the startup tone, hold down the SHIFT key.
You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.
Release the SHIFT key when you see the gray Apple logo and progress indicator.
To exit safe mode, restart your Mac, but no press during the startup.
OS X El Capitan: start in safe mode
Have a good.
-
Apple Watch heart rate monitor, the signal can be shared with other devices such as the Garmin Edge 520?
Hello
No, that it is not currently possible.
-
Why has my connection AirPort Extreme recently stopped with my Tablet Android and Windows 7 laptop, but connects very well with all Apple devices?
What exact model of AirPort Extreme do you have? Either have your tablet or laptop Win7 been updated recently? They were both able to connect before and not now OR they were never able to connect? Can the laptop Win7 access Internet when connected by Ethernet? One of these devices have problems connecting to other networks Wi - Fi?
-
My 2 TB Time Capsule is full and will not save. Yet, I have only 1 TB of data on my laptop. Note that I've reformatted the laptop since the last backup with a clean installation of El Capitan.
I bought a 2 TB external hard and have used Time Machine to back up. But I also use my time Capsule, which I save wireless.
Any suggestions on getting my TC back up?
One suggestion would be to copy all existing backups that are now on the Time Capsule 2 TB hard disk. Then, clear the TC and start over again with new backups.
A more expensive option... assuming you want to keep all old backups on the TC... would be to add a new TC and start backups goes in this direction.
Another option... If you do not need to keep all old backups now on the TC... would be to erase the TC and start over again with new backups. The benefit of doing this would be that no new material will be necessary, but the downside would be that you lose your old backup history.
-
TOSHIBA Power Saver won't work on the account with limited privileges
Good day to all.
I have old Satellite 1410 and for security, I am working on an account with limited privileges. I can't start Toshiba Power Saver, I get "access denied" message.
I need to remove energy saver and I use Control Panel Power Option, but I can not here the default brightness.
Can someone help me?Janusz
Without system administrator privileges, many system options are locked and could not be used.
You need admin rights to access this tool. -
When I go online on Skype, my internet will with limited access, and I'll offiline
When I go online on Skype, my internet will with limited access, and I'll offiline
Hello
1. which version of Skype is currently installed on the computer?
2 is this problem limited only when using Skype?
3. what type of Internet connection you have (cable modem, DSL, or something else)?
4 when it disconnects what do I you end up doing for her return to the connection?
5. What is the exact error you get that tells you that the device is disconnected?
6. what version of operating system you are using on the computer?Method 1:
I suggest you run the network troubleshooter to check if it helps.Troubleshooting network in Windows 7 using:
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
You can provide the network store event logs.Method 2:
You can update the latest drivers of NIC manufacturers.Windows 7: http://windows.microsoft.com/en-US/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly
Windows Vista: http://windows.microsoft.com/en-US/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly
The question you have posted is related to Skype and would be better suited to the Skype forum community. Please visit the link below to find a community that will provide the best support.
http://Forum.Skype.com/ -
Windows 7 upgrade
It's a HP Compaq 6710 b computer laptop running windows XP compatible with a Windows 7 upgrade?
This should answer your question
http://www.Microsoft.com/en-US/Download/details.aspx?ID=20I hope this helps.
-
Hi, whenever I turn on my laptop, I get now bombarded with the error message that says... The application or DLL C:\PROGRA~1\Google\GOOGLE~2\GOEC62~1.DLL is not a valid windows image. Please check this against your installation diskette. This message appears every time to load something like yahh or msn etc? Any help on what caused cela or how to solve this problem would be highly appreciated. Thank you
Try to clean the temporary Internet files...
-
Problem with Vista Home Premium Validation
I bought a laptop HP of Costco comes with Vista Home Premium but now I
Validation code 50. Invalid license.Validation of Windows through web just hangs. The key of product or paper plate
at the base of the laptop is worn out and not readable. I don't want to reformat my drive
or reinstall my software applications. What is the easiest solution? The cheapest?There must be a mistake that is not my fault. Is it possible to validate my particular
laptop if I provided the results of you and MGA diagnostics validate on your side?Hello
I suggest you contact HP support for assistance.
-
Original title: I have a laptop Toshiba Satellite L305-S5894 with Windows Vista Home Premium installed (32 bit). Unable to get a backup to a flash drive.
After back back, very many updates of windows, my computer is full of problems and it is not representative of the restore points far enough back to correct. I want really to save my data and programs for flash drive (s) and then go for a full recovery of the system (return to factory). When you try to do the backup on a 4 GB USB key I get an error including 0 x 81000029. I have seen posted answers to this. Everything is included to aid Vista disk from the window which was not included when I bought my computer. Any help would be appreciated.
Hello
The following article should be useful. To use system recovery options, you have Vista installation disc. OEM (Original Equipment Manufacturer) repeatedly will install on the computer Windows recovery environment. To cross check if it is installed, try the following steps.
1 start the computer and press the F8 key continuously to get advanced boot menu options.
2. on the menu advanced startup options, check if the Startup Repair tool is in the list.
3. If so, select it and press ENTER.
4. If not, then you should organize a Vista installation disc.You may receive error messages when you try to perform a backup operation on a Windows Vista-based computer
http://support.Microsoft.com/kb/950167
Maybe you are looking for
-
10.6.9 to 10.9 on iMac upgrade
Hi, can I upgrade my OS X (currently 10.6.8) 10.9 on my iMac? The computer keeps telling me that there is no new update. Please notify. Thank you. Here are the specs of my iMac Model name: iMac Model identifier: iMac12, 1 Processor name: Intel Core i
-
What laptop do need me for videos?
Hi all I don't know if anyone can help me (and I don't know if I'm posting in the right place, but here goes)... I am currently looking for a new laptop that I play music and video clips. The program I want to run has a recommended spec:P4 3 GHz cpuC
-
Portege M400: I'm looking for this Tablet PC in Bahrain or Dubai?
I searched for the new Toshiba Portege M400.I really love this tablet and think will help me in my work...But im a problem...I don't know where to find it in BAHRAIN or DUBAI...I need urgentrly...Help, please! [email protected]
-
I don't find a driver for my printer HP DesignJet plotter 1050c on Windows 7.
I don't find a driver for my printer HP DesignJet plotter 1050c on Windows 7. HP says they don't have one.
-
I use windows 7 on a new computer. During the first month, everything was fine. Updates have been downloaded and installed without any problems. However, recently, after an update to windows, my computer started running very slowly. After the res