Monitor moves angles of 90 degrees on its own

Similar Questions

• my mouse works correctly, it moves all over the screen on its own

  It started this morning very well, then unexpectedly, he starts slowly his way around the screen that I have never had this before, I use a trackball mouse, I already tried rebooting but also tried another mouse and even tried just unpluging the mouse and pluging it back

  Have you tried to use canned Air to clean the mouse?

  Using the uninstall/reinstall driver?

  Is the mouse still under warranty?  Contact manufacturer for a replacement

  There are nearby facilities that could conflict with the mouse?  Router, cell phone, phone?

  Yet away from the system.

  Here are links to support Logitech on the same issue

  See the latest response/resolution on the first thread.

  http://forums.Logitech.com/T5/keyboards-and-keyboard-mice/erratic-mouse-behavior/m-p/325613 
  http://forums.Logitech.com/T5/mice-and-pointing-devices/erratic-MX-performance-mouse-issues/m-p/711968

  http://forums.Logitech.com/T5/mice-and-pointing-devices/anywhere-MX-cursor-moving-on-it-s-own/m-p/663284

  http://forums.Logitech.com/T5/mice-and-pointing-devices/bought-a-Logitech-MX620-wireless-laser-mouse-erratic-mouse/m-p/344362

• Cursor moves on its own

  Periodically, my cursor moves on its own and has been a problem for a few weeks now.

  Initially, he started with the built-in cursor not only movement erratic but also stuck in place on the right side to her screen/only up and down. To try to solve this problem, I started using a USB mouse to see that the problem persisted except that I've been able to move the cursor on the screen even though it move independently (by clicking on the icons and other, however, continued to be difficult).

  It feels like this question started out not the case.

  Here's what I tried to solve the problem (takes the chips of another user and added on):

  Change of mouse did not help (the problem persisted with USB mouse and wireless with new batteries in wireless)

  * The mouse software update did not help

  * Move the mouse or its sender to another USB port wireless did not help

  * Restore the computer to a restore point of verified (2 weeks ago) before the problems started never did not help

  * Reset did not help

  * Turn off an extended display and performing a single monitor (or the other) did not help

  Pointing device settings change of rather fast for its slow response seems to have it actually move slightly slower, but it has not solved the problem and the rest largely unusable a lot of the time.

  * To control the cursor in safe mode (works fine)

  * Done a virus scan (computer is clean)

  * Made a clean boot

  * Ran troubleshoot on built-in cursor and mouse USB (or came with all the problems)

  * Check properties on devices and the results say that the two are "works properly."

  * Uninstalled and reinstalled the program for the device

  Any help is greatly appreciated!

  Hi J Clark,

  We appreciate the steps you have taken and thank you for the information provided.

  It seems that the mouse works in safe mode and it could be one of the engines is at the origin of the conflict. We will analyze and identify the cause of the problem.

  Which antivirus program is installed on the computer?

  You can open the Task Manager and monitor all programs running in the background when the mouse movement.

  Are you aware of changes to the computer in these two weeks mentioned?

  I suggest you to update display drivers by visiting the computer manufacturer's website and check the results. Also install all updates through Windows Update.

  See the links below for more details:
   
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   

  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  You can also scan SFC to check if there is any corrupt system files.

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833/en-us

  Hope this information helps. Response with status so that we can help you.

• selectingitems and trackpad pointer moves its own

  I was watching a video of Amazon and may have struck a couple of keys, or my hand slipped in the keys - I don't know, but pointer froze on the follow-up to the film bar at the bottom of the screen (not sure if this is relevant, or what is called in fact this bar) in all cases, the pointer froze and then began to move erratically in bursts on the screen , selection of apps, ibooks, photos, etc. and then OPEN them as if I had clicked. Literally goes haywire as if it had a life of its own. I have NEVER experienced this during the 11 years that I've had the Mac laptop. I don't know if trackpads wear out (my current MacBook Pro is a vintage 2012 and I debated update, but it was working very well.) I wonder how to clean the dust/debris under keys because I know it can be done and I was wondering if something got under the trackpad (seems pulled by the hair) but it's really another question for me to continue. Any help on trackpad possessed pointer would be appreciated. I don't see that this issue anywhere else... - Pam

  Remove the bottom plate and inspect the inside.  Pay attention to the battery to see if there are signs of expansion.  If so, take it out and have a new installed.  An extended battery can affect the trackpad.

  If no success, make an appointment at an Apple store genius bar for a FREE evaluation.

  Ciao.

• Portege Z series - the mouse cursor moves its own

  When I start my series Portege Z the cursor of the mouse moves by its own. Alfer several minutes (less than an hour) it stops and it works properly.
  For your information on the laptop, the Antivirus is installed and updated: AVIRA and Spybot

  What I tried to solve the problem:
  (1) I downloaded and installed the latest version of the pointer ALPS driver device that even so the same version was already installed. No result, same behavior
  (2) I tried with an external USB mouse, disable touchpad/pointing stick. No result, same behavior

  Suggestions, please?
  Thanks in advance

  Maybe you can try to start with a Live CD/USB. If this problem occurs also with the OS Live the question is related to laptop. If not, it s a Windows problem and perhaps a recovery would solve the problem.

• Computer notebook Synaptics trackad pointer moves on its own-Looking for solution

  I recently bought a new laptop Hp M6 - N010dx, and the trackpad Envy Touchsmart is already in place.
  I installed the latest drivers for my pc, upgrade to 8.1 windows and twisted the sensitivity of the mouse, but I always have problems.

  Sometimes the pointer will become difficult to move on the screen and then will move its own. Again, to move its own, as in, I'm not in contact with the laptop at all. It's very frustrating.
  I can temporarily fix the problem or reboot my laptop or by writ put to sleep and then wake up again. However, I am looking for a permanent solution.

  Any ideas?

  I decided to return the laptop to bestbuy. I found that many users have had this same problem with the same model laptop and no "solution" offered actually work (I even tried myself without result). It's really a shame because I liked this laptop apart from faulty equipment... I am considering getting the x 360, but he mixed comments as well.
  This may end up being my last HP laptop that really, really bothers me because they are beautiful and affordable pcs

• My cursor moves on its own.

  My cursor moves on its own. I'm not in contact with the space bar. I slow down my typing speedthe cu rsor always moves to this own topic. It doesn't matter if I type a report Ofc or email or facebook. A type (just typing those two words the cursor move the y of any one and put it in type)

  Hello

  To disable the touchpad, follow these steps:

  a. Click Start and select Control Panel and then click mouse.

  b. in the mouse properties window, click the device selection tab to disable the touchpad and track stick.

  c. click the Touch Pad tab to adjust touch pad and track stick settings.

  d. click OK to save the settings and close the window.

  For more information, see the link:

  Disable or enable the touchpad by using the access key

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=424135

  Let us know if it helps!

• QHMPL wireless Comboa Qhm9440 rotates 90 degrees to the right on its own.

  Original title: My Wireless mouse just turned 90 degrees to the right on its own and now I can't seem to fix the problem. Help, please.

  I use a qhm9440 of QHMPL wireless Comboa with windows 7 ultimate. The direction of mouse just turned 90 degrees clockwaise on its own, and now I can't seem to return to normal. I tried to re install the drivers and do a system restore, but nothing works. Help, please.

  Hello

  It seems that some setting needs to be changed for the mouse.

  Since you have already tried to reinstall the drivers and made the restoration of the system, I suggest you contact the manufacturer of the mouse to get help.

  QHMPL Support

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• I have need of an arrow or a kind of icon that points and moves to alert the user of the website to scroll down.  Are there widgets or is there a method to move an image in its own.  In addition, how to get my muse Web page to scroll automatically?

  I have need of an arrow or a kind of icon that points and moves to alert the user of the website to scroll down.  Are there widgets or is there a method to move an image in its own.  In addition, how to get my muse Web page to scroll automatically?

  A Google search for "animated gifs arrows" returned hundreds of animated arrows.

• Move the database on its own server Vcenter 4

  My current Vcenter Server 4.0 has the Vcenter Server and database SQL 2005 on the same computer. My performance is EXTREMELY slow, as in there more than 15 minutes for the client to connect, Vsphere load inventory and discover plugins until I'm able to use it. Once loaded, clicking on the servers and things within the client is very slow. So I think that by moving the database of its own machine, it will increase the performance of the vcenter server. I was looking in the vcenter admin section, and I can't find a way to 'clear' to tell him to look for the database on a different server.

  Does anyone have any documentation on how to move the vcenter database to another server?

  Thank you!

  Lex

  Take a look on:

  http://KB.VMware.com/kb/7960893

  André

• Move clips on the timeline each in its own way?

  Hello

  IM asking it's once again on its own thread, I hope someone can answer.

  How can I move clips from the bin of media in the timeline so that each clip runs on its own track instead of one after the other on a track?

  Thank you

  Saami

  Select items in the project window,

  Right click and click on Create Multi cam source sequence.

  You now have a multicam sequence in the project window.

  Click on this and open it in the timeline.

• pointer rolls randomly and moves its own

  Original post: runaway pointer

  My pointer has developed a small rectangle 3celled which appears at its end and makes the pointer carried on with a mind of its own. It also makes my uncontrollable roll screen.

  Says MSFT security essentials I am free from viruses and malware.

  What causes this?

  How can I stop it?

  I have windows XP w/SP3

  laptop Gateway

  Thank you

  grampsny

  Hello

  Click on the link below and see if it helps.

  http://support.gateway.com/support/manlib/cmponts/kbdmouse/8508818/08818.htm

  Hope this information helps.

• I have a problem with scrolling of mouse working on its own.

  Original title: in Windows 7, how can I stop popups, scrolling & other activities when I do click on the mouse.

  I recently moved from XP if it is not a problem.

  (1) while I read a website or a Word doc & move the cursor out of the way, it opens up the popups for no matter what cursor passes over, distract from what I'm trying to do.

  (2) in Word, when I try to highlight something to change or clear, somehow the cursor goes into scrolling on its own & does not allow me to highlight what I want.

  Basically, I would turn the mouse in what it was on XP because the "intuitive" nonsense is not help. If I want to see the popup, I can always right click. I have need it automatically sends me garbage.

  Y at - it a setting that I have not been able to find? I was well as the mouse settings and tried various combinations, but this feels like a more basic configuration question. If so, how should I do?

  Thank you

  Earl

  Thanks for your help with this.

  For some reason, the mouse was activating stuff (pop ups, etc.) when I checked precisely not to do.

  I tried what you suggested. What seems to have worked replaces the mouse. I had an arrangement to use a single set of keyboard/monitor/mouse with 3 computers, requiring the use of a mouse with the old pins instead of USB. I'm trying to do with 2 units of mouse and it seems fine. Don't know why, but I'm satisfied.

  Thanks again,

  Earl

• How to switch from firefox to its own directory?

  I had to use Chrome to install Firefox and it get program_files automatically. I need in its own directory - can I move it?

  Thanks Cor - el. It turned out that the computer, on which I was did not have administrator privileges. That must be why IE8 don't would not download it and Chrome messed with it.

  Anyway, once that I solved that resettlement was offered installation customized as expected.

  you're going to love Firefox!

  Robin

• iMac crashing and restarting on its own

  Hi all

  My iMac has been crashing lately and restart on its own. After trying to solve what was going on, I noticed that, just before these accidents occur, the following 2 warnings repeatedly appear on the Console:

  kernel [0]: could not open the file 2

  kernel [0]: vm_swap_create_file @ 1554 dry failure

  During the inspection, I realized that the var, there is no /vm folder and, therefore, no swap file, that made me suspect that the problem is related to virtual memory.

  I tried to launch an intensive application of memory while monitoring the use of memory through Activity Monitor and, of course, when all memory is used, the system crashes. Used swap shows 0 bytes at all times. In comparison, my MacBook Air has always a certain amount of used Swap data, even if some memory is used.

  I tried to verify if the virtual memory was somehow disabled, by using 'sudo launchctl load-w /System/Library/LaunchDaemons/com.apple.dynamic_pager.plist' but it seems that the service is already loaded.

  I'm at a loss and need help. Someone at - it clues about what is happening?

  Read this previous post of the Apple community...

  Boot the system using all the memory of my app and have to restart every few minutes. Chrome and firefox only apps that seem to cause the problem. Someone at - it suggestions? memory Mac early 2009 16 GB pro