Monitor not extinct

Similar Questions

• Computer laptop 15-ac111TX: external monitor not recognized

  After completing the last HP updates, including a BIOS update computer restarted and now cannot recognize the external monitor. Have you tried another cable and monitor and video card setting never display monitors.

  Already tried a reinstall the video driver

  Hi @olliessbrown,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP ENVY laptop and problems with the HDMI does not properly. Try to use this update all the drivers who might not have are yet.

  Please let me know how it goes.

  Click the thumbs below to thank me for my efforts!

  Thank you.

• Satellite Pro6100 - external monitor not showing movies

  I searched but couldn't find anything related. I wanted to watch a movie through the external monitor port connected to a projector. I could see all the big screen except the movie itself.
  I checked the laptop screen and the film on this subject but it is not cloned - I just get the border of media player and the buttons but it shows only a black screen, not the film.

  I tried a friend's Tecra 9000 and it shows the film perfectly. What gives?
  Updated the BIOS and I have the latest drivers Toshiba provided and followed all the guides for TV out, monitor, cloning, setting resolution etc, just have not found the magic combination.

  > I checked the laptop screen and the film on this subject but it is not cloned - I just get the border of media player and the buttons but it shows only a black screen, not the film.
  The settings collection can be all problems as suggested by Akuma.
  In addition it is very important that you switch the display on external monitor first before you start the movie!

• Satellite M30-S309 - certain proportions on external monitor not right

  Hello world.

  I have a Satellite M30-S309 that I just started to use it with an external monitor: a 191EW9 of Philips, which has a maximum resolution of 1368 x 768. The built-in monitor is 16 "; the new external monitor is 18.5 ".
  The computer has the driver for the new monitor, but with a few photos of the proportions are obviously not right.

  Anyone know of any way to solve this problem? Or it's an old computer like this all simply not up to handle this type of monitor?

  A solution would be much appreciated.

  Hello

  Can you please explain what you mean with certain proportions are not suitable?
  You can choose the native screen resolution of the external display or use another resolution of the screen?

  To me that sounds like this, you use a wrong setting. On the screen you can change the width, height and to this day. You should check these options.

  Welcome them

• Toshiba Tecra A8 monitor not recognized

  Hello

  I have a Tecra A8 PTA83A 042012 with the video driver Intel (r) Express Chipset driver 945GM.

  I also have a Toshiba - 1LC2 monitor 21.5 Tekbright PA3719A "
  The laptop does not detect the resolution correct for this monitor and the closer, I can get 1920 x 1080 native resolution is 1400 x 1050, which looks tense and ugly.

  The graphical interface drivers are updated according to the Toshiba site to THE (even though they are 2006).
  I tried to find new drivers (winxp_14324.exe that seem to be the latest drivers for the video chipset intel), but the driver said that he does not support my hardware.

  How can I get this monitor to display correctly?

  PS. I use an advanced port replicator but tried as well without it.

  Any help greatly appreciated

  See you soon

  What ports do you use?

  Maybe the graphics card has limited resolutions supported. Check in the manuals of the user to page 180 s.

• HP Pavilion a6750f: problem dual monitor (Second monitor not detected in DVI input)

  Hello everyone, I'm going to by a problem of not being able to setp toward the top of my second monitor.

  I own a HP Pavilion a6750f with an ATI Radeon HD 3200 card on board running on Windows 7 Ultimate 64 bit operating system.  In the back, I have two VGA and DVI inputs, VGA works, but when I connect the other monitor which is connected to a DVI adapter on the back, Windows does not detect any.

  I tried to go the DVI adapter to the other monitor and noticed that it refuses to work. I will note that my display drivers are all updated and I activated the option of customization to detect the second monitor, nothing shows up, it will not be the same acknolowdge that there are several screens.

  I think it's weird that I don't see this problem being issued when I was searching for a resolution on google for hours now. If someone can help me here please I would be very happy.

  Just to remind you try to connect a VGA (analog) monitor to a DVI - D (digital only) output on the computer. This is never going to work as analog and digital are two completely different incompatible signalling methods. With the help of an adapter DVI / VGA passive is the problem that these cards may work with DVI - I or DVI - A output... not DVI - D.

  Wikipedia - DVI;

  "More digital, the DVI connector includes pins that carry an analog signal compatible with RGBHV signals in a VGA connector. This allows a VGA monitor be connected to a passive adapter and offers a universal solution for the DVI interface. The analog pins are the four that surround the apartment or cross the blade as shown on the right side of the diagrams below. »

  

  8 analog vertical sync

  C1 - analog Red
  C2 - analog Green
  C3 - blue analog
  C4 - analog horizontal sync
  C5 - analog ground

  Note the absence of the pins on your computer and your so-called card C1, C2, C3 and C4. Without these pins is not just going to work. Still, there is no way to get an analog VGA monitor to work with your digital DVI - D only output using a so-called DVI - D to VGA. You may be able to buy an asset DVI - D to VGA Converter, but this will be expensive and cannot provide a poor video image quality.

  As you said, the HP f1703 monitor supports only VGA. However, based on the specifications, your HP w2207h 22 inch LCD monitor supports the entry to a VGA and a HDMI input. HDMI and DVI - D share the same signage and using a HDMI-DVI cable or adapter HDMI-DVI and HDMI Cable will solve your problem. For two monitors running on your computer, please connect as follows:

  Computer > HDMI-DVI cable or adapter HDMI-DVI and HDMI Cable > HP w2207h monitor

  Computer > VGA cable > HP f1703 monitor

  Please send Bravo

• W530 and Mini Docking Station - monitor not displaying at boot time

  I have a W530 (2441A 53) and I just the mini docking station for it (433835U). We are using PGP Desktop, then when I start my laptop, it prompts me for a PGP password. The monitor does not display it for me at all. I have to go to the laptop, open it and enter the password (well, actually, I think I can probably get on the keyboard that I use with the monitor, but I don't see what is happening, and the docking station is in an uncomfortable situation). Once I get the password, and the machine gets more in the boot process, and then the screen finally shows what happens, and it's very well after this point (well, not exactly - it is not about taking advantage of the resolution of my screen - but I am not concerned about it right now).

  Is there a setting I should do in the BIOS, Control Panel, etc., so that the monitor can function during startup?

  In the BIOS, set the graphic display to the detection of Optimus discreet and set to 'disabled '.

• Monitor not working no not after update...

  Home last night and the screen was black and would not wake up.
  Is turned off the computer and I tried again this morning. The computer fan is running but the monitor repeated that it was not connected to the computer.
  So, after some re - try, I tried another cable. Then another monitor. still nada.
  I guess its after a update restarted as it was due.
  A new computer with windows 7 x 64
  Any thoughts? and not; I got round to drive recovery either.

  Sarah

  Sarah,
  You get no matter what video screen at all?  You get a "splash screen" OEM (when the pc is turned on display the logo of the manufacturer like Dell or HP)?   If you don't get any video at all, you must contact the PC manufacturer for the warranty support.  This looks like a possible hardware failure. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Screen resolution of large monitor not appearing not so it cannot be selected

  I have a monitor with a native resolution of 1680 x 1050.  I was not able to find this setting by using the properties/settings screen with windows xp or 7.

  How can I fix it? Is this a feature of the graphics card? I used two different computers with it with the same problem - a xp and the other 7.

  Dick

  The game, June 14, 2012 20:04:01 + 0000, RGCCLE wrote:

  I have a monitor with a native resolution of 1680 x 1050.  I was not able to find this setting by using the properties/settings screen with windows xp or 7.

  How can I fix it? Is this a feature of the graphics card? I used two different computers with it with the same problem - a xp and the other 7.

  Any particular resolution requires four things:

  A monitor that supports
  A driver for your monitor and your version of Windows that supports
  A graphics card that takes in charge
  A driver for your graphics card and the version of Windows that supports supported

  You have the first of these four. If you have the other three I
  Don't know.

  Ken Blake, Microsoft MVP

• H243H monitor not coming back when it is turned off with the touch Monitor

  Monitor works fine when connected to my laptop. When it is connected to my desktop Dell Dimension 8250 monitor will not return with monitor power button. Must turn off the computer, and then click again to get monitor comes back on. Computer is a video controller ATI 9700 Raseon

  I thought it would be the computer. But the old Dell Monitor works fine on it. Map of Radion sees the Acer monitor, shows even the model #. I set Acer as primary monitor too because Dell is not connected.

  Just tried with a VGA cable instead of a DVI cable. It works!  Incredible. I used a cable DVI with old Dell monitr OK. I tried 2 different cables DVI so I know it wasn't a bad cable. When I connected to my laptop Acer \d hae it is with an HDMI cable.  Must be something with the Acer he dislikes DVI

  Auto config on Acer also works now. He did nothing when using a DVI cable.

  It is therefore a question of compatibility of age. But it's more recent monitor like older cable.

• Windows XP - monitor not turns off, power turns off after 5 minutes options the Auto value not

  sys is xp

  * original title - I can't disable the monitor in auto. power options are set to turn off monitor after 5 min, but it never turs of when I stop using the unit *.

  Hi jerryabts,
   
  -Which is the unit that you are talking about?
   
   
  Try to download the patch from the link below and install it to resolve this problem:
   
  The monitor may not turn off on a Windows XP-based computer even if you set the monitor to turn off after a period of inactivity

• Monitor not working properly, is rundl32 error message

  I turned on my computer and the monitor says: no video input, tried to reinstall the monitor still does not work. He attached to edge slot, worked, but I got the error message rundl32, I tried the solution of unpdating my video card driver but it says that one is not found (video card), 10 minutes before all thi my computer was working fine... that is wrong

  Hello

  Look here for a fix-

  http://www.Squidoo.com/RUNDLLError

  Good luck!!!

• Dual monitor - not compatible with this signal TV

  original title: dual monitor

  Hello!

  I connected my laptop to my LCD TV and chose the option to only display on the external monitor.  Unfortunately I get the error message on my TV "not compatible with this signal.  Because it does not work and I can't see I can't change all the options in the display configuration.  How can I restore my original settings so that when I connect to my TV the picture is displayed on my laptop?

  Thank you in advance for your help!

  XO steph

  Try typing the F8 key before Windows starts to appear in the start menu and select this option to start safe mode.  Make the changes to the view that you need to save and restart.  You can also try to plug an external monitor instead of your TV to see if you can see a picture then and make the necessary changes.

  "scaro013" wrote in the new message: * e-mail address is removed from the privacy... *

  Hello!

  I connected my laptop to my LCD TV and chose the option to only display on the external monitor.  Unfortunately I get the error message on my TV "not compatible with this signal.  Because it does not work and I can't see I can't change all the options in the display configuration.  How can I restore my original settings so that when I connect to my TV the picture is displayed on my laptop?

  Thank you in advance for your help!

  XO steph

• External monitor not connected - using mooring T500

  Hello

  I have an external monitor connected via my docking station.  It has worked very well so far.  Suddenly the computer does not find the monitor (no external monitor connected).  I see that the monitor is in power save mode - as it used to be when laptop was off.  When I unplug the signal cable, the monitor is powered - so there is nothing wrong with the power of the monitor.

  The incident happened in the following setting:

  1. I had a CD into the laptop when starting

  2. the Conference on disarmament began tearing before that my profile has been loaded (it looked like)

  3. I closed the top of the laptop when it was happening (normally it works very well and the external monitor appears).

  I'm at a loss what to do here and appreciate many clues.

  Tried to call my local support with no luck.

  CREDS

  Hello

  Found the answer to the problem.  Graphic design has been low (internal).  So I changed it to high performance and everything works fine.

  CREDS

• Installed Windows 7 - Second monitor not detected

  So I just installed Windows 7 Ultimate (x 64) and everything that happened very well, but my second monitor is not detected. I am running Windows Vista and it worked but since I updated it stopped working, I tried 3 different monitors and have failed to update my drivers.

  Hey Zei,

  You need to update your video driver. In this case, you can contact your manufacturer to have updated.

  Thank you.