Monitor U2415

Similar Questions

• U2415 - how to get my new monitors to stop themselves dimming

  I just bought two new monitors U2415 off Newegg. Looks decent monitors unless they keep dimming themselves. It's terrible! I don't want my monitors gradation by themselves when I try to use my computer! Please tell me there is a way to disable this option. I already went through the Windows settings and disabled 'adaptive brightness. That make me think that there is a problem with the monitors.

  Crisis averted!

  I've never touched the brightness and contrast settings. When you set the it warns you that "change contrast will disable dynamic contrast.

  What a waste.

• How to connect 2 Dell U2415 monitor on the docking station in combination with a Dell Latitude E7450 processor and controller

  Hi guys

  hope you can help me out here. I plan to buy some E7450 processor and controller of Dell's Latitude for our company with a docking station and some Dell Ultra Sharp 24 monitor - U2415. Aims to use the E7450 processor and controller with the dockinstation and connect 2 monitors U2415 of Dell. the issue here is. What type of cable do I need? should I buy 2 normal display port cables? It resolution things to work with this combination?

  Here the link of the monitor

  http://Accessories.AP.Dell.com/SNA/ProductDetail.aspx?c=HK&CS=hkdhs1&l=en&s=DHS&SKU=391-BBUW&redirect=1

  here some specifications of the dell Notebook printer

  Fix. You can also ask users on the laptop Video board on the platforms they use.

• U2415, Dual, laptop Samsung

  I bought two monitors of U2415 and I am trying to connect to my laptop.
  M1 is connected to the computer samsung laptop with HDMI, works very well.

  Tried with daisy connection m2. After contacting Samsung my graphics card does not support the DP1.2

  My laptop also has a VGA output port. I tried a HDMI adapter / VGA, connecting the VGA output to the HDMI adapter and then to the HDMI in the port of M2. Although windows recognize the second monitor, the display function calls it a "Non - PnP monitor generic" with a resolution of 1024 x 768 and the Office of the extension does not work as M2 is black.

  Y at - it an option to connect my laptop with the VGA port of the U2415 as a second monitor? I tried this connection as a single monitor and does not work too well... high-end VGA to HDMI will not work? Is there an adapter? This means I have to return a monitor?

  Line pattern = two monitors U2415 to connect to the laptop Wavec of HDMI and VGA ports.

  Body = CN
  * What is the serial number of 20-digit alphanumeric monitor?
  CN-0PVJW-74261-4CN - 146L

  CN-0PVJVW-74261-4CN-1N8L

  * What specific model of computer?

  Sansung NP-qx410-S02US
  

  * What operating system?

  Windows 7 version 6.1
  * Which video card?

  Intel HD graphics card

  Switchable nVidia GeForce 310 M (N11M-GE2) + Intel HD Graphics (Optimus) Intel HD Graphics (Int).

  Maximum resolution VGA resolution maximum of 2 048 x 1 536 at 85 Hz refresh rate (ext.)

  Support Win7: Resolution of the monitor CRT support

  Maximum resolution for HDMI v1.3a compliant / a resolution of 2048x1536pixels of color from 32 bit to 75 Hz

  There is no DP ports available on the device.

  
  * Video card driver version?

  8.15.10.2202
  * Which ports are available for the video card?

  HDMI

  VGA
  * Which video output from the video card port video on the port monitor do you use?

  M1 output HDMI to HDMI in

  M2 VGA to HDMI with no success

  * What cable are you using to set the video card to the monitor?

  Provided by Dell

  HDMI to VGA INSIGNIA apter

  * Press the Menu button of the monitor to open the OSD (On Screen Display). The bottom of the screen should display a resolution. This resolution should match the default monitor resolution
  * Brief description of the problem monitor?
  * Has been the monitor purchased from Dell or a reseller?
  

  Yes from Dell Canada.
  

  Hello

  I bought this video Plugable USB 3.0 to HDMI 4 K UHD (Ultra High Definition) graphics card for multiple monitors to 3840 x 2160 (DisplayLink DL - 5500 Chipset - Supports Windows 8.1, 8, 7).

  Exit laptop HDMI--> HDMI--> HDMI Cable into the monitor port DellU2415 #1

  Computer laptop USB 2.0 port--> Plugable USB HDMI adpater--> cable HDMI > HDMI in the port of monitor DellU2415 #2

  It works great, for regular office related work / web use. There is a minimal lag in the #2 monitor, but I use only the USB 2.0 port on my laptop. What is important, the two instructors work in 1920 x 1200

  the resolution, the reason why I bought these (big) monitors in the first place.

  Thank you very much for your support.

• U2415, around the gap between the Windows desktop and the edge of the monitor (bezel)

  Hello

  I have a Dell Ultrasharp U2415. I've read all the FAQS and I know I have to perform the SUBMISSION, but before doing so, I just want to know if it is normal to have a gap between the Windows desktop and the edge of the screen. If the Windows desktop is not covering or fill the entire screen. There all around the smaller than a 1/4 "gap between the edge of the windows desktop on the edge of the bezel of the monitor, and this model has almost no bezel. The graphics settings in Windows 10 are set to use the native resolution of 1920 x 1200 monitor. I tried with different computers (all windows 10), and the drivers are up to date. The monitor is connected via HDMI since I don't have portable computers not with DP interfaces. Laptop computers have Intel and ATI video cards. I have check the put option to scale on the video card software and it is set to 100%. So, is this gap normal? Is the edge Office Windows 10 supposed to touch the physical edge of monitors?  If the gap is not normal, I will perform the integrated test.

  TIA!

  Based on the YouTube comments, which seems to be normal. "But you must run the APPLICATION to see if the"smaller than 1/4"gap" appears. If Yes, then we can say that it is normal. If this is not the case, then some settings of the operating system is the culprit.

• Unpredictable behavior with Dell Ultrasharp U2415 two monitors

  Since I created my two Dell U2415 monitor, I had sporadic problems with one or two of them are not recognized. I have a system Windows 10 T1700 Dell Precision with two monitors. This is the first time I've ever owned monitors that use Mini DisplayPort technology. The problems are:

  1. I would like to turn the monitor OFF the end of the day, because I don't like the brightness of the light emitted by the power buttons when not in service.  But it seems that turn off the monitors always brings problems when I return to the computer the next day. For example, if I turn off the monitors, the next time I turn everything back on, 1 single monitor is recognized. Sometimes, it's the one on the right, and sometimes it's the only one on the left. The other monitor has power, but no entry is recognized and it just says: "Entering Standby Mode" or something like that, and there is no display.  When this happens, there is no 2nd monitor when I go into the control panel display settings. It's as if the monitor is not plugged. I have to restart my PC again (this time, ensuring that both screens are turned on at the time where it restarts), who sometimes feel to come back on two monitors.

  2. on Monday, I'm alerted me to an update of the software Dell Display Manager, so I installed the update. At the end of the day, I've upgraded my PC sleep (leaving turned on monitor). When I came back in the morning, the PC wake acknowledging only 1 monitor. I had to go to the display settings for Windows 10 and extend to the 2nd monitor (why I am able to do it again)?

  Why are these things so delicate?  Is there a specific order in which everything must be turned off and turn it back on so that both monitors will be recognized correctly? Should I wait until my PC is off to turn off the monitors? I turn on the PC BEFORE monitors (or vice versa)? I have to turn on the primary monitor BEFORE the secondary monitor (or vice versa)? There seems to be some magic to all this and I would like to understand exactly what is happening. I want to be able to turn off monitors whenever I like and feel confident that the two be recognized when I've turn them back on. At this point, I'm leaving the power to monitor all the time because of the many problems I had and because I simply do not trust them.

  Thank you

  For the computer to identify a DP/CDM monitors, the monitors must be first, and then the computer graphic card reaches out to monitor DP/CDM opening handshake. Any changes to this order will disrupt the handshake. A computer hibernate or sleep modes tend to confuse the DP/CDM handshake. So I don't use them at all.

• U2415 monitor the: 'no dp cable' with Inspiron 1774

  I've got new Dell Inspiron 1774, works great. Got new Dell U2415 Monitor to go with it.  I connect to the laptop using an HDMI cable because there is no display on the Dell Inspiron Port.  When I run the monitor I get "No. DP Cable".  I tried to replace the HDMI cable for another, I tried to connect the RFP to USB 3 cable, I tried to install the drivers etc.  Nothing seems to work.  Any help appreciated.

  Hello

  Have you set the HDMI input source?

  Display port is selected as the input source by default in most currently ships of the monitors.

  Thank you

• U2415, Nvidia GTX 950, monitor wake up after the deep sleep?

  I have two-desktop monitor. We're U2415, connected via mini - dp-> DP and the other is U2311H, connected via DVI on my Strix Nvidia Asus gtx950 video card.

  When starting PC, DVI monitor is always first & fastest even if it's my secondary monitor, but this isn't a problem.

  However, the real problem is when to wake up my PC after monitor deep sleep DP (30 minutes, several hours or more) won't wake up at all. It stays black. I have to manually, press the 'power' 2 times before monitor finally wake up and restoration of 2 desktop screen.

  Before NVIDIA, I got an AMD card and this was never a problem (although I used to connect to U2415 via HDMI). I used the tool to remove all previous video drivers. I'm also using the latest Nvidia drivers, 10 x 64 windows.

  I must point out that when you wake up to a short sleep mode, everything is fine. If I wake up monitors in less than 30 minutes, or so they work as should. I also activated 1.2 DP see if the problem will be solved.

  I am ready to suggestions, what I should check then in Windows, monitor settings etc. ?

  Thank you!

  Looks like the Nvidia driver is slow to launch the DP communication CDM from deep sleep causing the monitor to think that nothing is connected. You could try to test a DP to DP cable and see if the problem persists. One solution would be to connect in this way =
  NVIDIA GTX950 DVI out--> DVI to DVI cable--> DVI U2311H in
  NVIDIA GTX950 out HDMI--> HDMI to HDMI cable--> U2415 HDMI in

• U2415, its port on the monitor using headphones (ongoing displayport) has an audible hiss

  Hello

  I have trouble with two U2415 SSS monitors that I bought this week, when I plug headphones into the monitor there is a low volume generated from the monitor. When I plug the headphones in the respective computer audio port, there is no whistle - just silence.

  It is not a problem when playing sounds, but saw the helmet wearing while there is nothing else game is boring and it is hard to focus.

  The sound comes on displayport monitors, and the volume is controlled by the operating system (Win10 / OSX via soundflower).

  The computers and monitors are all on the same land/Jack.

  Is it possible to fix this? I am at a loss, and frankly the audio port on the screen is useless in this State. It would be nice to make it work, because it would mean that I could reduce the number of cables, I need to plug / unplug it when you move stuff.

  Please find below information on the installation of my computer (s).

  
  The computers tested: Custom PC with nvidia gfx, MacBook pro, Asus Zenbook
  * OS: Windows 10, OS x 10.10
  * Video card: Nvidia GeForce GTX670, Intel Iris Pro 5200, GeForce GT 840 M
  * Driver version: Windows Nvidia 355.98, for OSX I don't know
  * Ports: PC: displayport and dvi, mac: lightning/miniDp, zenbook: miniDp
  * Ports used: dp-> miniDp, miniDp-> dp, miniDp-> RFP
  * Cable: the miniDp provided-> dp cable and a 1 m deltaco miniDp-> dp cable
  * Resolution: 1920 x 1200 @60 Hz
  

  Best regards
  Erik

  Headset must be connected directly to the computer, not on the screen. The U2415 user's Guide page 11 States, "use of the helmet is not supported for the line audio output connector.".

  

• U2415 monitor will not connect.

  U2415 monitor will not connect.  Get the message "no connection DP.  New out of the box yesterday from Dell.  Tried the two connectors supplied DP.  Also tried HDMI to HDMI.  I was assured by the sales these last connection was sure to work.  Now the Dell support told me my only option is an expensive (~ $ 60) VGA adapter DP.  My computer is a 18 months, Dell XPS 8700 running windows 8.1.  Looks like a return if this is even possible.  Buy all Dell for 20 years, but maybe it's the end of it.

  The serial number you provided you bring here? Anyway,.

  So there are two ways to connect =

  NVIDIA GeForce GT 635 exit HDMI--> HDMI to HDMI Cable--> U2415 (on the left looking at the back) HDMI in
  * Press the key Menu of U2415
  * Go to the input Source
  * Choose HDMI 1

  NVIDIA GeForce GT 635 DP on--> U2415 CDM DP cable--> U2415 CDM in
  * Press the key Menu of U2415
  * Go to the input Source
  * Choose MiniDisplayPort

• U2415 - when I changed the monitor upside down I hear something like a screw wandering inside.

  Greetings from the Greece. I apologize for my bad English. Has just delivered my new u2415. But when I turn the monitor upside down, there is something like a screw that moves from one side of the screen to the other.  The monitor works perfectly when it is plugged. The warranty covers replacement with a new or not? Or just a new one?

  Policy of Dell on monitor to nine = trade
  * If the monitor Exchange is configured within the first 30 days of the date of the original invoice, the replacement will be New
  * If the monitor Exchange is configured outside the first 30 days of the date of the original invoice, the replacement will be refurbished

• Dell Inspiron 580 connecting to a new Reference Dell U2415 monitor

  Dell Inspiron 580 connection for a new Dell U2415 monitor supplied HDMI cable does not fit my computer HDMI port... the new end of cable is too large for the HDMI port?  How can I work around this? The monitor has a VGA connection.

  Thanks for the help.

  Robert

  Here is the U2415 User Guide. Page 6 shows that we delivered a mini-cable DP to DP (DP = DisplayPort), not an HDMI cable. Pages 10 and 11 show us that the U2415 has the following video ports =.
  HDMI in
  HDMI in
  DP in
  CDM in
  Out DP

  The Inspiron 580 mid back has two video ports =.
  HDMI output
  VGA output

  You must buy an HDMI cable to HDMI locally.

• U2415, artifacts monitor after power off for a period of time. Solved by allowing the DP1.2

  U2415 - artifacts monitor after power off for a period of time

  I'm running Win 8 Pro 64 bit, Asus GTX 760. Connected to the U2415 using the miniDP to DP cable.

  It is: after turning off my monitor for a period of time (PC fixed IT), 2 hours or more, after turning it back on, I see lines on the screen.

  I will need to restart the PC for it to be back to normal.

  It will not happen if I turned OFF the monitor for a short period. Only when I turned OFF for a few hours.

  Any ideas? Thank you.

  I downloaded a video on Dropbox. I had it turned on after turning off for about 3 hours.

  [See:www.dropbox.com/.../U2415.mp4]

  Hi Chris, just an update.

  A local forumer had discovered how to solve.

  It was the scene of DP1.2. By default, it is set to "Disable". After that I put to 'Activate' and test it for 2 days, everything seems fine now.

  Hopefully someone will find this useful.

  Thanks Chris.

• (Redirected) Dell Inspiron 580 connecting to a new Reference Dell U2415 monitor

  Dell Inspiron 580 connection for a new Dell U2415 monitor supplied HDMI cable does not fit my computer HDMI port... the new end of cable is too large for the HDMI port?  How can I work around this? The monitor has a VGA connection.

  Thanks for the help.

  Robert

  Best of this post in the Forum of monitors, here:

  http://en.community.Dell.com/support-forums/peripherals/f/3529.aspx

  Bev.

• multiple monitors using miniDP and HDMI

  I have a small question, I have 3 monitors (Acer and 2 DELL U2415).

  Currently, I want to have a configuration as follows:

  ACER-> MAC Pro via HDMI

  Both my DELL-> Pro MAC with MiniDisplayPort

  The only problem is, HDMI will work with a miniDP and the other monitor is not recognized and if disconnect the miniDP first then the second - the first and the second will work will not. Apparently he doesn't like HDMI 1 and 2 MiniDP.

  Then I took my ACER and used the HDMI / MiniDP and plugged (essentially the 3 monitors are on MiniDP) it works fine.  However, I think that the cable is not terrible because there are static in the image.

  Can you guys please help me on how to set it up so that my acer still uses the HDMI and connects to the Mac Pro and the other 2 Dells use miniDP cables.

  Thank you.

  Make sure that you have all the monitors on the same bus Thunderbolt.

  https://support.Apple.com/HT202801