Monitor UltraSharp 2412 m on command?

Similar Questions

• Blu Ray plays is not on an old monitor Ultrasharp

  Greetings - I use an old monitor Ultrasharp of thirty-two inch September 2005 with a white DVI connection to a new PC-HP high range.  Tried to read a DVD Bluray (Band of Brothers...) but it does not work and tells me he has a problem with HDCP (diagnostic Cyberlink using Power DVD 13). Does this mean that my Dell monitor isn't compatible Bluray and I can do something? The monitors they are pilots?  If the monitor took a HDMI connection would help?

  Help would be appreciated sincerely

  Thank you Michael

  Hi Michael,

  You will not be able to play blu ray on this old monitor, I'm afraid. There are gadgets that can be used to hack into the system to play blu ray on non HDCP hardware, but they are usually more expensive than a new monitor.

• Manage/delete several unused external monitors desktops

  Hi - I have a MBP of 2015 (OS X 10.10.5) with an external monitor to 2412 M Dell. When I'm at home, I use the external monitor as my main screen. It works fine now, but it took me a while to find the right driver to make the display works reliably. I mention this because I think I'm done with an additional office for each time I tried to connect another monitor.

  If I have two fingers dragging left/right, I have what looks like 5 different offices (changes background each time, but all my icons are identical) with an additional office on the MBP screen (which is understandable, I can't drag to). This only happens when the focus is on the external monitor (i.e. I can't use the built-in monitor and drag between workstations, even if the external monitor is attached)

  I guess that each of these workstations were created when I tried different cables to get the monitor to work (many did not work at all, we worked with occasional outages and glitches, then I finally bought a Belkin DVI - D Apple cable which works perfectly)

  Although all icons are duplicated on each of these desktop computers I can open different applications in each office and slip between them, so that each office has to behave independently.

  Is it possible to remove these workstations, or is it a feature expected?

  Several desktop computers is a feature that can basically triggered several ways. If you press the F3 key you will rely on desktops and on the top of the screen, you will see all the desktops. Move your cursor to the top in one of these small desktop computers, then click to go to this office. Or, move your cursor to the top in the small icon on the desktop and an X appears in the upper left corner of it. Click the X to remove the desktop computer.

  Additional workstations are practical because you can force specific programs to launch their windows in this office only. This allows me, for example, have only the email App appear in a single window, in a second browser, MS Office Apps in a third. It keeps my cleaner work environment because I tend to have 5 to 8 programs running at the same time. OTOH, my wife hates and is never more than a desktop computer.

• Can I use a monitor at the time XP & keyboard with Windows 10?

  It might be stupid question, but I'm going: I have a Dell Dimension 4700 running Windows XP.  I think the upgrade of the tower with one of little Inspiron desktops, but I wonder if I can save a bit of money, at least in the meantime using my monitor UltraSharp 1704FPT existing with the new Win10 Tower.  My present Dell has a card Radeon dedicated video with a DVI output, but the monitor has a VGA connector as well.  Finally, I'll upgrade to a 20 "+ display, but $$ are tight right now."

  Also, could I use my improved multimedia keyboard (model SK-8135) with a Windows 10 system?  There is a keyboard included with new systems Inspiron, but I like the feel and action of full height (if that's what it's called) of this old keyboard.  Like on the monitor, it still looks brand new and works perfectly.  Thanks in advance.

  As long as you buy a desktop computer with the required by the monitor video connector, you'll be fine.

  As for the keyboard, you will need to Google.

• Shell permission command to the device using NDG sets?

  Hello. I have configured NDG, there is a group called "GR1" with 30 switch.

  This group is set up a command authorization set Shell called "Monitoring", which don't show commands, ping and traceroute are allowed.

  I want to let the users to pass in only 10 of the 'GR 1' group set up some interfaces and IP addresses, go to the other does not. ! Note: The number of interface is not the same for each switch can be FA0 / 1, but for others it can fa0/3.etc.

  I want to keep these 10 switch within the group "GR1", it is possible to do this configuration?

  -Thank you

  I edited my post above to make it clearer. You can assign auth sets. Shell the user, group, or level NDG. More details are mentioned on the following link:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/SPC.html#wpmkr697610

  AFAIR, one device (AAA Client) can be part of only NDG, so you can't get your condition using by NDG Shell command authorization sets. Unless you break the NDG in NDG more than one.

  You can assign authorization at the level of the user or the Group (after the appropriate group users) to achieve your requirement.

  You can also use the 'privilege' on the switch command to ensure that users can only see the commands you want. For example, when a user connects it will be placed on level 7. Now you can keep unwanted orders at level 15 and lower orders you want to level 7. All other users would receive a lower level (e.g. level 5), so they will not be able to run these commands.

  Concerning

  Farrukh

• Help shop for a graphics card for me!

  Hello

  I just got a good deal on a new HM 2713 Ultrasharp while also recently getting a Ultrasharp 2412. 2 soft monitors, but my XPS 7100 (1055 t, 460 Watt power) has to a Radeon 5450 graphics card. Dell just sent me another DVI - D cable, because one wouldn't connect to DVI-connector (is it broken? I don't know-single link DVI fits, Dual Link DVI is loose and does not connect.) Nevertheless, the 5450 isn't compatible Eyefinity, a real disappointment when I bought 3 years ago. I think I need a new GPU to have all 3 monitors (my 3rd monitor a Viewsonic old, pre - HD LCD). About me:

  -Not a gamer. Just need each monitor to run at native resolution (2560 x 1440 at the HM 2713) and play HD movies decently, or just for "hundreds" of websites, I have open at any given time.

  -J' love peace, that's why I love passively cooled cards. I'm limited by power 460w anyway, so why not have a low-power consumer card that will support Eyefinity? (What I was hoping with the 5450).

  The only one I see that seems to meet these requirements is the Sapphire Radeon HD 6450 Flex 1 GB. Seems to be a map similar to the 5450, although many more power draw max 212w (5450's energy consumption is 17w Max is that correct?), but still within its requirements for a 400w power threshold.

  Is this who is right for me? Is there a better option?

  Thank you.

  The 2 GB model is the model 1 GB DDR5, DDR3 and so faster.

  Congratulations on the new video card - let us know how it works.

• Screen Dell 5 k with 2013 Mac Pro in El Capitan

  So, after years of waiting for Apple to make a screen that mocks use of the capabilities of the Mac Pro, I gave up and bought the Dell UP2715K 27 inch monitor UltraSharp Ultra-HD 5 K.

  It uses two cables in parallel to transmit the signal from k 5.  There's help on the Dell site and apparently it works 5 k with the Mac Pro 2013 in respect of Yosemite, but there is no mention of El Captain (why type this ridiculous name of OSX makes me so angry).

  Thus, the question, someone at - it operate under El captain to 5 K with the 2013 Mac Pro garbage.

  Thank you

  Stephen

  In

  Use screens 4 K and Ultra HD TVs with your Mac - Apple Support

  Apple says that

  Double-cable displays

  Some if poster with greater than 4K resolutions requires two DisplayPort cables to connect the screen at full resolution. V10.10.3 with OS X Yosemite or later, 5K 27-inch Dell UP2715K display is supported on the following Mac computers:

  • Mac Pro (end 2013)
  • iMac (retina 5K, 27-inch, late 2014 and later versions)
  • MacBook Pro (retina, 15 inch, mid-2015) with AMD Radeon R9 M370X

• Vista on Portege M200 - some problems with nVidia display driver

  Hello

  I recently decided to update and perform a clean installation of Windows Vista on my Portege M200, now that Toshiba have released official drivers for this machine.

  Everything works fine, EXCEPT the nVidia display driver. I have the following questions with the driver Toshiba provides for this machine (97.52 version):

  (1) when the screen turns off to save power, the backlight does NOT turn off. Screen turns off but the backlight will stay lit.
  (2) for the recovery of the standby mode, the backlight is OFF. You must use the shortcuts Fn-F6/F7 to change the backlight level manually, that will bring him back.
  (3) external monitor does not work (with command Fn + F5 or nVidia control panel). External display is always blank.
  (3) video playback in WMP is very chopped (a secondary concern for me).

  Is there a chance that Toshiba could finally get a updated driver that would set out the? That would really make this machine fully functional in Vista.

  Thanks in advance for any help or information.

  Null value

  Hello

  > Are there opportunities that Toshiba could finally get out an updated driver?
  I noticed that from time to time new updates of pilot (any series of notebook) are released on the European driver Toshiba page and, therefore, I m optimistic that new updates are available

  But note; usually, various problems can be resolved by installing some patches MS Vista and missing patches.
  Then visit this [MS update website | http://www.update.microsoft.com/microsoftupdate/v6/default.aspx?ln=en-us] and check if all the patches are installed.

  Best regards

• MAX does not see COM1 but is VISA. Unable to communicate

  I have a service monitor that accepts the TCL commands in Hyperterminal (via RS232/serial). I want to use LabVIEW to send these same commands. MAX does not list COM1 as device available, although he rises to the VISA as possible a choice. For some reason, I can't monitor service to accept orders when I go through LabVIEW and VISA. Yes, I made sure the configuration set in LabVIEW corresponds to what is on the monitor. It depends in MAX not being able to identify the resource COM1? Any ideas on how to solve this problem?

  Hi enewburn,

  If the COM port does not appear in MAX, then there may be a problem with the serial port itself or the VISA driver.  Please, check the following:

  1. in the Device Manager, make sure that the serial port is present and there is no exclamations.

  2 fix the driver for VISA to ensure that nothing is corrupted.  If opossible, use theni website link: http://joule.ni.com/nidu/cds/view/p/id/1370/lang/en

  Let me know if this changes behavior!

• Comments on the system, I bought

  First of all, I tell myself I should layout, what I bought and what I added to the system.

  • Dell Studio 540
    • Core 2 Quad Q8300
    • ATI Radeon HD 3450
    • Onboard 5.1 (Realtek)
    • 8 GB RAM
    • 640 GB drive internal SATA
    • 640GO of external drive (which I moved from my old system)
    • LinkSys WMP600N (that I purchased separately)
    • DVD - RW
    • Keyboard Microsoft I had (4000 natural)
    • Mouse MS that I had (IntelliMouse Optical)
    • Vista Ultimate 64 bit SP1 (now upgraded to SP2)
  • Dell UltraSharp 20 "widescreen LCD (which I moved from my old system)
  • Reference Dell 20 "widescreen LCD with webcam and stereo microphones

  And now comments:

  1. The system scenario and the new monitor have a gloss finish.  I ended up concluding that it added nothing to me.  In fact, they show fingerprints easily.
  2. The glossy part apply to the display area of the new monitor too.  Unfortunately, it adds a lot of glare that does not have the older UltraSharp monitor.
  3. The webcam is a disaster.  Do not buy a Dell monitor just for the webcam.  In my case, my glasses can make things worse for the camera.  They reflect the light emitted by the good monitors the camera.  In any case, all I get is a bad dark image.  I tried to play around with the settings, but they did not help.
  4. The monitor, UltraSharp, while several years older, has more connections than the new video monitor.  I do not use them, but some people might still have a use for connectors S-video and composite.  Now, if the new monitor has a HDMI connector, that is not, it could compensate for this loss.  The irony is that my video card has only a single DVI connector.  I had to separately buy an HDMI cable to DVI to connect two monitors.
  5. The UltraSharp monitor has more settings in the database.  In fact, the new monitor has not.
  6. The new physical buttons on the monitor are smooth, but add not much more than the glitter.  Not what I paid for.
  7. I was really hoping a chassis without tool.  He did not.  In fact, this matter is the exact opposite of "no tool".
  8. For desktop computers, the location of the center of media player, in the middle of the front of the case, makes sense.  But I put it on the floor (on a trolley).  I don't see when I put my CompactFlash card or a USB device into the connectors.  So it would make sense that future designs would allow the Center to move up above the external and placed disks at an angle.  The center of the whole being a USB device, such a system could be plug-and-play.  Owner simply moves the Center to the desired location.  Once the Center is far from the default location, external drives move downwards to fill that spot and make room for the new location of the Center at the top.  The current Center makes room for a floppy drive, but why?  There is no floppy connector on the motherboard.  I you happen to have a card PCI IDE of my old system and an IDE LS - 120 (bed LS-120 120 MB disks, and standard floppy disks), but I don't see the trouble.  Most of the people do not have those.  So either kill the 3.5 "Bay or something similar.
  9. It's a good thing that the door in front of the media center can be left out.  I never close these doors.  In fact, I have simply removed their cases.
  10. I'm upset that a $1300 computer does not come with VT - x support.

  I hope that Dell will improve their products, based on my experience.

  Will Pittenger

  Thank you for the interesting comments on the PC.

  Bev.

• Creating Instance of database problem MySQL

  Hello
  
  I'm new in Hyperic totatly and I implement Hyperic here in our society.
  When you create the DB instance, monitoring occurs in the last command, to provide the right of access:
  
  --------------
  MySQL > create user 'hqadmin'@'localhost' identified by 'nt2000xp ';
  Query OK, 0 rows affected (0.02 sec)
  
  MySQL > create database HQ;
  Query OK, 1 row affected (0.00 sec)
  
  MySQL > grant all HQ.* 'hqadmin'@'localhost ';
  ERROR 1064 (42000): you have an error in your syntax SQL; Check the manual thatcorresponds to your version of the MySQL server for the right syntax to use near ' HQ.* to ' hqadmin'@'localhost "on line 1
  -------------
  
  May be my fault, or not?
  
  Thank you
  
  Dias Thiago.

  Looks like you're missing the keyword WE:

  grant all on HQ.* to 'hqadmin'@'localhost ';

  Also, I assume that you have already created the database of HQ?

  Charles

• CC desktop app crash Mid-installation

  Hey,.

  I'm working in a post-production facility and whenever we need to install an update for CC, at least half of our machines experience problems with the application of Office CC - most of the questions have to do with software does not show up as installed (even if they are), and hit "install" again on these machines Removes the user's preferences. The biggest problem is when the desktop application will not launch, or it launches, but then crashes after a few seconds, with either the only way to bring him back.

  Needless to say that these issues are problematic, but given that the internet is flooded of complains I assume that you are already aware of them.

  The biggest problem is this time, one of the machines that took the Desktop App crash, don't launch the application after restarting.

  I tried following the instructions recommended, removed the app with the CC cleaning tool, have changed the name of OOBE OOBE.old folder, rebooted the machine again once and downloaded the latest version of the installer of the CC of the Adobe Web site.

  When you try to reinstall it, Setup reaches the phase 'Installation' and crashes (more like "disappears"), without giving any error massage.

  I would point out that the computer is a mac pro (running OS X 10.9), and, before you run the reinstall, I checked that no processes not related to adobe turned and manually made sure the CC desktop application has been completely removed. I also tried to install different users but get the same results.

  Have you seen this problem before? Is there anything else that I have not tried?

  Or alternatively, somehow download installers for the last update offline? To access installation offline programs would facilitate the way we update process, on us and on our bandwidth (for you connect to different machines and download updated same time and again is not the largest way, particularly when enforcement is so unpredictable and still has major problems).

  Thank you!
  Michael

  For people who might have the same problem - I ended up half - solve this by copying on and replace the entire CC Desktop App folder (under Applications > utilities) from another machine that worked very well.

  The Application is now able to launch, but for some reason, After Effects is stuck at 76% update, which gives an error message which AE should be closed before continuing. Thing is that AE is certainly not running - I took care of that by using the two monitor activity and through the command line and also tried to restart the machine, but still get the same error.

  I only tried to exit the application of CC desktop and launch of AE (which was obviously not updated), that chose "updates" from the inside of the AE. He launched the former adobe application Manager (the machine has also installed CS5) and installed the updates from there, where everything seems to install fine without any problem.

• Dell UltraSharp U2515H Monitor

  I'm curious if my 27 inch iMac 2011 mid will be able to run both 2 Dell Ultrasharp U2515H monitors http://www.amazon.com/Dell-UltraSharp-U2515H-25-Inch-LED-Lit/dp/B00SPWPF1O?ie=UT F8 & PSC = 1 & redirect = true & ref_ = ox_sc_act_ti...).  In general, I need to watch sports events simultaneously on two different monitors, and I wonder if my iMac both these 25 inch monitors can handle at the same time.  Any help would be appreciated.

  Your iMac can support 2 screens Thunderbolt of Garland. This Dell monitor supports the DP 1.2 STD for daisy chaining two monitors.

  After reading using screens 4 K and Ultra HD TVs with your Mac - Apple supported it does not resemble your iMac would support 2 of these monitors. But I could be misinterpreted.

• I am trying to connect a Macbook Pro with Retina display for a new monitor Dell Ultrasharp 3014. I tried to connect via HDMI and DVI cable supplied with the monitor but the monitor says "no cable dvi - d".

  How to connect a Macbook Pro with the (just bought) Retina display for a Dell Ultrasharp U3014's new? I tried to connect with HDMI and DVI cable supplied with the monitor but the monitor says "no dvi - d" cable. I never tried to do that before so I'm lost.

  Use a mini-displayport cable. Connect to one of the ports Thunderbolt the MacBook Pro to ultra-compact monitor entry.

• New Dell Ultrasharp U2417H old Inspiron 580 MT desktop computer monitor

  My new monitor has arrived today, but I can't connect it with the included cables. My old Inspiron 580 was purchased in 2010 and my old monitor used the plug VGA.

  The cables provided with the new monitor are the upstream USB 3.0 cable and a DP for CDM cable. It doesn't seem to be a taking of CDM on my desk then, how can I connect the monitor?

  My first question to the seller Dell was "this new monitor would be compatible with my old desktop Inspiron 580, that is, about connectivity?"  He said yes, he would.

  Any help would be much appreciated - but not too technical if you please.

  Thank you

  Dell Inspiron 580MT: Intel core i3 530 Processor

  Graphics card: 1 GB ATI Radeon HD5450

  PETER2305

  The ATI Radeon HD5450 1 GB of graphics card, show it as having a HDMI connector, as the Dell UltraSharp 24 InfinityEdge U2417H monitor, you can use an HDMI cable similar to this:

  https://www.Amazon.com/AmazonBasics-high-speed-HDMI-cable-standard/DP/B014I8SSD0/ref=sr_1_1?ie=UTF8&QID=1466012307&SR=8-1&keywords=high+quality+HDMI+cables

  ATI Radeon HD5450 1 GB graphics card:

  http://www.Newegg.com/product/product.aspx?item=N82E16814102882

  Data sheet... Monitor Dell UltraSharp 24 InfinityEdge U2417H:

  http://Accessories.AP.Dell.com/SNA/ProductDetail.aspx?c=HK&l=en&s=DHS&CS=hkdhs1&SKU=391-bcpx

  For more information you can also, this post in the Forum of monitors, here:

  http://en.community.Dell.com/support-forums/peripherals/f/3529.aspx

  Bev.