monitoring of entry issue

Similar Questions

• Double monitors Mac Mini issues

  Recently I performed a clean installation of 10.11.6 on my Mac Mini end of 2012, and now all of a sudden when I restart in normal mode with two monitors Hung (one bolt of lightning, the other HDMI) he logo apple, loads, then everything goes black. If it is plugged in, it loads the main office very well. If I load in safe mode, I can start with two monitors very well. Also, if I boot boot with a plugged in, wait for loading, then plug the second, it works fine.

  Before the installation of the OS, these two monitors worked fine without having to do that, running the same hardware and OS. Super boring... I'd appreciate any help or advice! Thank you in advance.

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  https://support.Apple.com/en-us/HT204904

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x

• Qosmio G50: HDMI to DVI output Monitor & other related issues

  I would appreciate more help with this one as literature and research provided no firm indication.

  Situation is that I am awaiting delivery of a G50-10 and a DynaDock, and before opening the box I want to be sure that I can achieve key objectives. In particular, I would normally (in do not travel) wishes to operate the laptop with two external monitors and the lid closed. Media functions are a secondary consideration for the use of this laptop.

  The two external monitors are 22 "1680 x 1050 with inputs DVI and d - SUB.

  It is difficult to documentation, what will happen in this configuration. So, my questions are:

  1.
  Port d - SUB on the G50 will deliver 1680 x 1050 at 60 Hz?

  2.
  The DynaDock DVI port will deliver 1680 x 1050 at 60 Hz?

  3.
  The HDMI port on the G50, when connected cable HDMI-DVI external display, delivering 1680 x 1050 at 60 Hz for use with Vista applications?

  Thanks in advance.

  Very nice post thanks for sharing this with us!

  By the way; This forum from a user to s ;)

• Acer G257HLBIDX monitor HDMI audio issues

  Just today, I bought myself a G257HLBIDX monitor... I had read, it was stated that the monitor provides basic audio features. I have limited through my HDMI on my GPU and thankfully to start my PC. The resolution was neat, imagination was great, I connect to my Windows 10 and I go on my setting configurations because I expected that I would have at least set the audio device as the default monitor...

  As I thought, it was required so after, I get on YouTube to try volume so I can adjust it... But at the exit. The monitor has been recognized as a speaker and in the volume mixer he showed that they receive an audio but there was no sound.

  There is no driver for the monitor either so I can't fault that. I would like to help.

  Thanks to all who could take the time to read and respond to this message.

  Midnighthunter,

  Go to your audio playback options and make sure that your audio files by default is value, which I think you have, you have a headset or speakers plugged into the port on the back of the monitor audio output, since it doesn't have speakers built in?

• Monitor LED backlight issue?

  I just bought a W2071d monitor and I was wondering how can I Turn Off the LED backlight feature...

  Also, how can I get a copy of the manual for the Moniter. I don't like the CD...

  User Guide and Manual:
  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&DLC=en&LC=en&product=5203203

• Monitor/RAM activity issue

  I recently installed 16 GB of RAM in my end of 2011 Macbook Pro. Is it really to tell me that I am currently using close to 12 GB of RAM? Is there no way... right? And why kernel takes over a full Go? What happens here?

  With newer OSXes, 'Unused RAM' is identical to 'wasted RAM.  OSX will use all available RAM if it determines that usage will make the operation more efficient.

  But looking at the bottom bar... you have a very small green bar, meaning memory pressure is low.  When the graph increases, then turns red you have problems of real memory.

• Monitor on my Volume Control Panel entry is grayed

  Original title: whistle

  Monitor on my Volume Control Panel entry is grayed out.  The only way I can stop the hissing sound is silent on this point.  To be perfectly honest, I don't know what the "Monitor input" is for!  I can listen to music with this Cup.  What will happen with the muted entry monitor?  Why do I have this monitor of entry?  What is this for?  And what makes grey outside and start whistling? Is there a way I can get him to stop?  Thanks for your help, whoever you are!

  Hi DoDDSDolly,

  1. who is the manufacturer and what is the model number of the system?

  2. the monitor has a built-in audio card its separate?

  Step 1:

  You can check out the following link and try the Fixit to solve the problem.

  Also try to update the latest audio drivers for Windows XP by visiting the manufacturer's Web site.

  How to troubleshoot sound problems in Windows XP

  http://support.Microsoft.com/kb/307918

  Step 2:

  If you do not use any monitor input, then try to uninstall it from the computer.

  To do this follow these steps:

  a. Click Start, click Control Panel and then double-click Add / Remove programs.

  b. in the currently installed programs, click the program (input monitor) you want to delete and then click on remove.

  c. If you are prompted to confirm the removal of the program, click Yes.

  Check out the link:

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit ourMicrosoft answers feedback Forumand let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• ANY way to monitor audio files on a 70 d when shooting video?

  I know there is a meter if you go to the menu, but I want to follow live with headphones on what comes out, not what is happening.  I can monitor the entry but want to make sure that the output is not saturated.  Any advice would be wonderful.  I tried to connect the A / V cable of the camera and audio surveillance there during the filming, but it does not work.  I know that the HDMI audio is muted during recording, as well.  This isn't a minor issue for those of us who want to ensure that we have sound quality, I use a mixer and multiple sources during the shooting.

  Summersond,

  It is not a method to produce the audio signal only the EOS 70 d with headphones while recording video.  We apologize for any inconvenience this may bring you at this time.

• Basic question on the monitoring of the slopes

  WARNING: I am a logic pro x newbie.

  I've set up an audio track:

  No matter if the route of entry of surveillance is on or if it is enabled, the sound does not come out when the device is 'play' (i.e. I pressed the play button).

  I would like to sound out so that I can practice parts and hear against the main device.  (If I press file rather than play, his fate against the main arrangement.)

  I would also like to be able to record a track while another track is simply monitored. I use this during the recording of the complex vocal parts. I like to play the game with a hand on the piano while singing.

  I understand there are solutions by always using the button 'record' and then removing the tracks. But this seems like a simple enough features that I think that it is probably a better way.

  Thank you

  Monitoring of entry

  If you have an active Audio track only the follow-up entry button and not the record enable button, then you should hear the o of that Channel input Strip regardless you are in play or record Mode.

  If you have the record enable button, then the behavior depends on the key 'Auto input Monitoring '. If active (recording ➤ Auto monitoring of entry), then the entry is muted during the recording Mode.

  

  Play with keyboard

  About reading as well as MIDI, while recording audio, you're right, you need to create a workaround and because it is not possible "out of the box.  To play your MIDI keyboard, you must select a software Instrument track. If you have active recording an Audio track for recording, then this software Instrument track is also recorded in the recording Mode.

  Installation program:

  Here's a pretty simple tip to have a dedicated software tool Track/Channel Strip which is always "playable (it requires a bit of knowledge of the environment):

  • In the environment, go to the layer 'click & Port '.
  • Create software Instrument Channel Strip and assign it to 255 Inst.
  • Load a Plugin Instrument (i.e. piano) on this channel strip
  • Drag an extra cable from the existing output of the object of "Entry Notes" to that Channel Strip object
  • (Optional) You can create a button object to control the Mute button of this channel strip. You can put this button on a separate layer of environment, make it a floating window and place convenient anywhere on your screen. You can even assign a button on your external MIDI keyboard to control this button so that you can play it "along keyboard' on and outside.

  What you have done:

  • Any incoming MIDI signal is now sent "parallel" to this software Instrument Channel Strip (255).
  • If you have created a track for this channel strip, you can have displayed it in the mixer (or you select the button display the mixer 'All')
  • When you play your external MIDI keyboard, it will be routed to the Channel Strip and you can set the controls on that strip of Chanel
  • Whenever you need to hear this channel strip, just mute it.
  • Your external MIDI keyboard will still be routed to any selected track in the track area and its MIDI signals can be recorded as usual.

  

  For more information on all procedures to record/monitor in logic or learn how to use the little custom environment configuration check my textbooks of logic in my series graphically improved manuals : "Logic Pro X - how it works" and «Logic Pro X - détails»

  Hope that helps

  Edgar Rothermich - LogicProGEM.com

  (Author of "Graphically improved manuals")

  http://DingDingMusic.com/manuals/

  "I could receive some form of compensation, financial or otherwise, my recommendation or link."

• monitor gets black screen

  My monitor guard rethink a black screen when I turn on my computer, basically when I turn it on I see start for half a second, then I get the black screen while my monitor is always on

  Now, I recently built a computer, put it a few days ago the same thing happens, I didn't install anything don't not even windows 7 yet, but when I turn on the computer I get the black screen again, I can not install windows

  My brother and his friend think it is the graphics card, but when I built my new computer black screen continued to occur. If I turn my screen I can see my screen for half a second, and then it just goes black again.

  Yes I checked the cables for the monitor, I have even plugged into my laptop, and the same thing happened to the monitor

  So I was wondering... What is the cause of the problem? my brother think that theres something wrong with the new parts, I think it's the monitor that is causing the black screen and I have to buy another... What is it?

  Hello

  Since the monitor displays the same black screen after connecting to a laptop, this might be a problem with the monitor. Contact the manufacturer of the monitor on this issue.

• out of range signal to monitor

  out area error range on monitor to signal when the connection of the laptop vga cable

  Hi jolynne60,

  If I understand the only thing that appears on the monitor is the message about signal, splash screens and Windows are not displayed, please correct if I have understood you.

  It is a hardware problem, whenever these types of messages appear on the screen, the monitor may not detect or the implementation of the video signal.

  Who is the manufacturer of your laptop?

  The following steps are worth a try:

  1. make sure that the computer is connected to the monitor is using the correct video output source.

  2. If the monitor has an input or source button, press the key.

  On some monitors, the entry or the video source selection lie in the on-screen menu system. If Yes, press the Menu button on the screen and the buttons on the front panel allows you to select the video input.

  You might want to know

  Connect-your-computer-to-a-TV

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  If the problem persists, contact the computer manufacturer for assistance.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Configuration monitoring IPS 4270 problem

  Hi all

  I installed the new IPS 4270 in our data center. He works with default signature setup.

  Now, I want to control all the traffic coming in and by IPS. Can someone then such me in the name of the tool and how to configure it, by which I can monitor the traffic/attacks as well.

  Note:-I'm not able to monitor the entry and exit traffic/attacks using cisco IDM 6.1.

  Please help in this regard

  Reg

  Juti

  If you have only a handful of the sensors then you should use IME to manage your snesors and watch the traffic of the event. It's free.

  http://www.Cisco.com/en/us/partner/docs/security/IPS/7.0/Configuration/Guide/IME/ime_getting_started.html

  -Bob

• Why my monitor does not work?

  I was using IE and then it froze my laptop while I was watching a video... I did a reboot hot, but the monitor will not come back to it has never done this. I tried to update the diagnostics monitor firmware and fun, but that's fine. When I plug a monitor or a TV, it works fine. Checking the BIOS does not beep, but is significantly slower. What can I do?

  I was using IE and then it froze my laptop while I was watching a video... I did a reboot hot, but the monitor will not come back to it has never done this. I tried to update the diagnostics monitor firmware and fun, but that's fine. When I plug a monitor or a TV, it works fine. Checking the BIOS does not beep, but is significantly slower. What can I do?

  Wait...

  Do you mean that your monitor doesn't work - but if you connect the computer to another monitor or TV (which is a 'GOLD' on purpose - you did both?) that you can see and use your computer?
   
  Don't the monitor having the issue to work on another machine or is the monitor just died (material MADE die)

• How to cancel show program on a secondary monitor windows?

  Hello

  I have 2 monitors.

  What I did to drag the window of the program on my secondary monitor.

  Issues related to the:

  (1) when I did, I noticed that the window of program on my secondary monitor window is different, because all the icons/buttons that usually appear under the program window now are gone when the program window is in the secondary monitor?

  (2) given that I saved the activities, how to cancel back (ie the window of the program back to the main screen of the secondary monitor)?

  Thank you

  And what version of Premiere Pro are you using?

  If it's CC2015 go window->-> reset, to provision saved workspaces (Alt + Shift + 0 if you're on a PC)

  If it is CC2014 reset it go to window-> space-> current workspace

• How can I find my son so I can watch it?

  This Forum has changed things around on me once again since I visited last, and once more I think not how to follow a thread once I started it.

  Can someone tell me how to monitor my pending issues?

  Thank you.

  He should be here

  • https://support.Mozilla.org/questions?filter=my-contributions