Satellite A20 - new graphics card driver?
Hello
I got a DVB - T card, the TV picture is bad-
The bottom is on the top of 180 ° (driven).
a new graphics driver should do better?
Where is a new card driver?
Best regards
Bernd
Hello
How do you know this new display driver should do better? Where did you get this info?
Tags: Toshiba
Similar Questions
-
Satellite A100-564: need a newer graphics card driver
Hello
I can't update my Ati 200 M display only to the 6.14.10 driver and pilot it is very old.
I found a new driver on the ATI homepage but it doesn't work. Only the driver of Toshiba work.
Both are very old? I try more than 10 drivers.The pilot on Toshiba.com support is 8.126 but pilot 2D and the driver control is only 6.14.
But why can't download a driver from ATI.COM?And quick question; can I change in my satellite A100-564 more graphics card?
Here, two short answer;
(1) drivers from the ATI websites are NOT designed for mobile graphics cards equipped in Toshiba laptops.
You can find this info on the ATI page:+ All pilot and technical support for the products are provided by the original manufacturer of the notebook or laptop. Drivers are available for download at ati.amd.com are for products of office only. +
Graphics driver Toshiba are specially designed for Toshiba laptops and it is very important that you use these drivers to avoid overheating of the material and damage!
(2) the mobile graphics cards are not expandable. The chips are fixed and especially welded on the map and can be removed easily.
Good bye
-
Satellite A300 - need a new graphics card driver to play the game
Hello.
I have a little problem,
I have the game of simulation of tractor and I'll start the following error message:Error: Not impossible not init 3D System.
Shader 2.0 model is necessary
Please install the latest video drivers.I install some drivers on my computer, that I found on the Toshiba site, but still you can't and don't know what to do with it.
Could someone help me please?
Hello
The error is obvious; the game can not start and run due to the graphic driver.
I guess that you will need the most recent version.I think you should check your graphics card chip and search on some 3rd party pages for the other version of the Toshiba driver page driver driver won't help you.
Good bye
-
Cannot install VISTA on Satellite A100 graphics card driver
Hi all
I need help.
I just installed Windows Vista Ultimate on my Satellite A100-326, (series PSAA9). This system has a graphics card from NVIDIA® GeForce Go 7300 with 256 MB dedicated memory that has worked very well on Windows XP MCE!
The default graphics card driver does not work, so I downloaded the new driver for VISTA from Toshiba.
Don't just install! I always get the following message: "the NVIDIA installer didn't find all the drivers that are compatible with your current hardware. The installation program will now stop. »
We know what the problem might be?
Did someone encountered the same situation?It's really frustrating...
Thank you
JotaHi Jota
Please check the different view on the same driver problem.
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20479Try to download the driver again and see your results. Thanks ;)
-
Satellite P200 accidents + message: graphic card driver does not work properly
Hello
hope that this issue has not been covered before, but I've owned a Satellite P200 for 3 years now, and this week, it crashes all the time.
When it started going down he gave me a few messages in the sense of "your graphics card/driver does not work properly and windows will be arrested to avoid damage.
It has progressed to the point where now when I turn it on, I have vertical lines running down the screen and the screen flashes on and outside. Within 20 seconds, it restores the BSOD - 'there was a problem and windows will be arrested. Error Page_Fault_In_Non_Paged_Area"then stops.
I ran a system restore but the problem remains.
I have a feeling that my graphics card is toast. Is this good? Are there any other options to try? Thanks in advance for any answers.
Matt
Hello
Sounds like the GPU problem.
But try the graphics card driver update.
Use the most recent driver for your graphics card.In addition, clean the fans of portable computers.
Dust and debris could prevent the cooling fans to turn with the best speed and this could lead to a higher temperature which would lead to overheating.
Use a jet of compressed air. I also use it and it helps to get rid of dust and debris.If this is not enough, then a problem of graphics chip would be possible.
-
Pavilion HPE - 533 sc: installed new graphics card. Hard drive stops
In order to improve my graphics performance for games that I invested in this graphics card:
NVIDIA gtx 950, links shows the map and specifications:
http://gadgetsngaming.com/2015/08/21/nVidias-GTX-950-at-160-easily-beats-750ti-in-1080p-gaming/
How fitting the screen stops at initial HP logo and "press ESC to start menu.
I can also clearly see that disk hard fails or starts the Windows 7 Edition operating system home premium.
I am running Nvidia GT 630, and back on this card machines works well again.
It just loks like the new graphics card prevents the hard drive to run.
All attached cables (power cable 6 pin) and locked firmly into the PCI slot.
Is it possible that the new card draws so much power that it prevents the hard drive of the race?
When you press ESC, it seems that the hard drive is registered in the Bios.
This nvidia gtx 950 is better? It seems to be more the size of the one I have - nvidia GT 630. Link shows specifications.
http://videocardz.com/NVIDIA/GeForce-900/GeForce-GTX-950
*
First of all try to help me, please do not write that I should get a new machine - I thought that, despite this current have worked without any problems for 5 years now.
Do not forget that I have to install a lot of programs and to transfer other data - it would be nice to avoid this.
If if can not be fixed - which stationary HP desktop computer (I have a laptop) can have the new nvidia gtx 950 mounted?
http://store.HP.com/us/en/PDP/desktops/HP-envy-Phoenix-810se-desktop-j6n64av-ABA-1
or this
HP Pavilion Desktop-500-585no
Thanks in advance
I'm not familiar with current PC for sale, regarding upgrades. Since is considered a new HP, try looking at the list of options on the HP website. Most higher end PC have the options that you choose before buy you, to customize the generation. Choose a model with options that match your criteria now and notice the upgrade options - write down them - to avoid confusion later. OR go with a customized version, but this could mean significant spending. It is the hand off the coast between prebuilts and personalized.
-
Is satellite A10 - possible to install the new graphics card?
Hello
I have a videocard Satelite A10, 2.2 Ghz, 712 MB of RAM, provided with your computer.
I just bought the Sims 2 and thought from the specifications that I would be able to play on my current card. However when I try to run it it gets to the intro screen and then hangs when it is ready to go into the Menu. My first impressions are that I don't have a pretty good graphics card.
I need a 32 MB T & L capable card so can someone confirm if this is why it would not work on the system.
If that's the case I'm looking to see if it is possible to install a new graphics card on the machine I want to play more games to date.
the map I'm looking at is Sapphire ATI Radeon 9600 XT 256 MB AGP8X graphics card. It will work on the machine and it is likely to solve my problem?
Thank you
HI Jeff,
In General, it is not possible to change the graphics card in your laptop. This is because the graphics cell are generally not a component separated (as with a normal PC), but generally a specific graphic chip attached to the motherboard so make the graphics a part of the laptop.
At the same time, the graphics driver is normally a specially modified version will omit some of the more esoteric aspects of the normal driver to minimize the risk of overheating chip since it does not have its own cooling system. Given this, you will find probably than trying to load the latest graphic website manufacturers drivers (Nvidia, ATI, etc.) will not work, and you will therefore be limited to these pilots provided by Toshiba on their Web site.
In order to get your copy of the SIMS 2 to run you need to omit or reduce some of the graphics settings in the game itself, or alternatively, you can try to use some of the graphics third-party drivers that are written to provide some of the omitted features of the original notebook drivers. Note that if you do that there is no guarantee that they won't cause your overheating graphics chip, even if I used the ATI Omega drivers for some time now without any problems. You can get them: -.
http://www.OmegaDrivers.NET/
Kind regards
-
Satellite L500-1DT: can't play Grand Theft Auto because of the graphics card driver
I use my laptop for a number of games.
I just downloaded GTA4 but can't play.
I get a understood to "re - install DirectX and/or insert the latest video card driver.
I reinstalled DirectX, but I'm not sure of the video card.Any ideas what driver I need?
Hi mate
This unit supports the Mobile Intel GL40 graphics card.
The latest graphics card driver can be downloaded from the Intel page.
See the Intel Web site.The installation of the graphics card must be made in the Device Manager.
Here, you use the Advanced installation procedure which allows to point to the driver files downloaded from the Intel page. -
I think that I need a new graphics card for my Satellite M70 343
Hello
I had problems with my laptop. After a start-up time specifications and give a problem with the IALMRNT5 pilot report. The laptop also gives some display problems, after a certain time, then another graphic resolution is displayed.
I have restored the software but is not a solution and also I downloaded the drivers from the Toshiba Support Site!
I think the graphics card to give problems.
Where can I buy the new graphics card?
Installed: Intel 915GM/GMS, 910MS Express smart card.Hello
It s not possible to exchange the VGA card in your system, since the VGA is soldered on the motherboard (the most important thing of your laptop on which all components are on) and if you have a problem with your graphics card then you should contact a local service partner authorized, due to a hardwarecheckup or a repair of your device.
To find the closest just check the following link:
http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT
Good luck
See you soon -
Satellite L500-1CQ - updating the graphics card driver
I need update for Toshiba L500-1CQ graphics card driver. I can't find anywhere that I tried on one of the sites of toshiba to find, but they did not have the 1CQ series.
So please I really need this update of the driver.
But they should have PSLS0E model.
Check again please. -
Satellite A500-1GL: 2 questions: the fan speed & graphic card driver failures
Hello
I have 2 questions, hopefully someone can help me with that.
* The first question - quick fan *.
I'm on online gamer second life and world of the craft of war) recently my fan speed crank up to 90 percent for about 5/10 minutes before leaving quiet. Then speed up again after a period of time. I'm confused as to why he did this because when I check my cpu temp is only make 40%, and I use a cool buffer table.
I'm looking for some advise here because all said Toshiba was making sure I had the latest bios update. But I would have thought it is not the processor overheating the fan must not be crank that quickly. My laptop is only 2 months old.
Can anyone help, should I be worried?
* Second question - graphics driver *.
Also on a couple of times I got my screen briefly go black and then recover. A pop up appears saying something along the lines of the core of the graphics card.... Driver recovered. It flashes if fast, that I never see the entire message. Don't you think that something is wrong with the graphics card? (card nividia geforce gt300m)
I really hope that someone can offer more help that Toshiba has done, as I am a bit unhappy to be problems on a 2 month old laptop.
Thank you for reading and I look forward to any Advisor.
(> I'm on online gamer second life and world of the craft of war) recently my fan speed crank up to 90 percent for about 5/10 minutes before leaving quiet. Then speed up again after a period of time. I'm confused as to why he did this because when I check my cpu temp is only make 40%, and I use a cool buffer table.
> I'm looking for some advice here because all said Toshiba was making sure I had the latest bios update. But I would have thought it is not the processor overheating the fan must not be crank that quickly. My laptop is only 2 months old.The cooling fan is controlled by the fan table in the BIOS. Fan table contains information about the temperature and the fan speed that means the depands on some level temperature fan speed.
Over all the possible game features as the CPU, GPU, produce heat and the heat dissipation is high
Cooling modules would begin to turn faster if the temperature level would be exceeded
This is nothing exceptional everything at stake> Also on a couple of times I got my screen briefly go black and then recover. A pop up appears saying something along the lines of the core of the graphics card.... Driver recovered. It flashes if fast, that I never see the entire message. Don't you think that something is wrong with the graphics card? (card nividia geforce gt300m)
I read on a similar question, and apparently, the graphics card DRIVER crashed during games
Maybe it's a compatibility problem between game and pilot
In most cases the graphics card driver update should fix this and I read on some forums that it has helped in many cases -
Toshiba Satellite L870-177 graphics card change?
A question on the Toshiba Satellite L870-177
You can replace the graphics card in the laptop?
Currently, an AMD Radeon HD 7670 M, 1 GB, HDMI is inside and find it a bit... modest, so I would like to replace it with a better
is this possible? Often read in other forums that you can not replace graphics card, so the question
LG
Published by:. Pinocchio.
> Can you replace the graphics card in the laptop?
No, the GPU can not be upgraded
Even if you would be able to remove the GPU of the motherboard and plug another chip, I guess that the BIOS would not address the new graphics card.You are very limited in the hardware upgrade of the mobile
What you can upgrade are parties such as RAM or HARD drive. Sometimes the CPU can be updated, but it is also not supported by the laptop manufacturer. -
Re: Satellite C660-13R - graphics card update
Hello
I want a new graphics card for my laptop satellite, but I was told can not change just what I have in my room does not work the game diablo 3 and I don't have the money to buy a new pc, so I wanted to buy just a upgrade for it can anyone tell me if it can be modified and if possible a list of most recent graphics cards I seeks to it I really need help with this thx
Here's the photo of what he said on d3, when I try and run it
Post edited by: Sambuca
Hi Sambuca
Check it please this Toshiba document - http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm
-
No Signal after installing new graphics card
Hello and thank you in advance for your help!
We have a 2 years old HP p6540y. It has an ATI video card integrated. When we recently turned on, we got a message "no signal" on the monitor and then he'd go to sleep. We tried many things to fix... listed below, in order and are always the same message. Please advise!
(1) No Signal: DVI, VGA, HDMI. So we unplugged and rebooted, no change.
(2) checked monitor and DVI & VGA cables with another computer: they all work.
(3) installed new graphics card: NVIDIA GEForce GT 610. Still got same message "no signal".
(4) we plugged/unplugged all the other cards/cords / no matter what we could and cleaned. Then, finally, the monitor turned on! But not for long...
(5) after you restart the computer after installation of the graphics card driver, we got the 'no signal' message again. We released once more, other cards/sheets and again once the monitor and the computer came to life.
(6) we uninstalled the ATI integrated graphics card. When we go to display, Advanced Options, he mentions our new NVIDIA as graphic/video card.
(7) we turned computer off during the night and this morning when we have lit, we once agin got the message "no signal". We have unplugged/plugged computer several times. Also tried the trick with cards/plugs by pulling and we have nothing. No Signal. After doing this several times (about 10), he is finally working again.
(8) we changed the sleep settings to: screen saver = never; Standby mode = never.
(9) we restarted again to get once more no signal message.
So... what should we do?
Thank you very much!
Triusa, welcome to the forum.
I think that your problem is caused by the power supply unit (PSU). Here's a guide to help you solve the problem:
http://support.HP.com/us-en/document/bph06788
Also, the existing PSU is 250W. The 610 GT requires a minimum of 300W.
If your problem is solved, please click "accept as a Solution.
-
Pavilion p6 - 2120t: Windows will not start with the new graphics card
Installed a Zotac GT 740 profile down in my desktop PC graphics card HP Pavilion p6 - 2120t and now the PC does not start.
HP Pavilion p6 - 2120t CTO desktop PC
Configuration:
Intel Pentium CPU [email protected]
4.0 GB RAM
Intel HD Graphics Driver version Family: 8.15.10.2291 dated 27/01/2011
Motherboard: IPISB-CU (Carmel2) (1 open PCI Express 16 expansion slot pins)BIOS to Version 7.18
Running:
Windows 7 Home premium 64-bit w/service pack 1
Two monitors (VGA, 1 digital port 1)Before installing the new graphics card, I replaced the power supply original 300w with a 400w power supply.
For starters, I disabled the onboard graphics in Device Manager. Then, I opened the case and installed the GT-740 in the open PCI Express slot. I made sure that the card was fully engaged in the slot.
I plugged both monitors to their connections voted on the new map.
When I tried to boot the PC, the digital monitor displays the screen HP (the one that indicates which key support to achieve the start menu) and then frozen. No other entries of key or mouse have been accepted.
The PC then sounds 4 short beeps (about 10 seconds between each beep) and then a long beep before turning off the signal to the screen.
Then, I removed the new graphics card on the PC that starts then. I have reactivated the original graphics drivers and the PC then worked normally.
Tried the above process two more times with the same results.
I then went into the start menu to look at the BIOS. The menu of the BIOS shows two options:
> Sources of boot UEFI
Windows Boot Manager
> Sources of boot legacy
ATAP I CD/DVD player
SATA2
Hard drive
SATA0
Network controller (Realtek PXE B06 D00)
PC using UEFI Boot Manager Windows boots normally
I have not tried Legacy Boot Sources because I don't know which one to choose.
I went to the HP site and looked for an update to the newest BIOS, but updating them is a rev version 7.16 while my PC shows my BIOS to version 7.18
I know that others have had a similar problem but I have not seen a solution that works for my PC.
Any advice would be welcome.
Thanks for your time.Hello
Your PC isn't spec'd to run Windows 7 using the Windows Boot Manager. I expect to a UEFI-based graphics card likely to work on an HP PC that does not have a BIOS version 8.
The below listed OEM HP, graphics cards should work in your PC using a normal non - UEFI W7 and W8 installation.
Maybe you are looking for
-
Satellite L850 - 13N - function keys ("FN") does not work
Hello I have Toshiba Satellite L850-13N with Windows 7 x 64. The problem is that my function keys does not work. Could someone write me that I need to install drivers? PS. Sorry for my English :) Thanks for the help.
-
iPhone will not pictures download using app readycloud on r8500
Im trying to use the photo download functionality of the application readycloud for iOS and it shows it has 655 photos but continually indicates 'sign in' at the top and shows no saved pictures. What could be the problem?
-
I've been running Windows 7 for a few days now. Should I install Vista Service Pack 1 and 2?
-
Message error "parameter is Incorrect" when powering down wide network of password protected sharing
In the network and sharing Center, when I click on the arrow to option sharing protected by password, select turn off password protected sharing and click on apply, I get an error message saying "the parameter is Incorrect." In fact, I would keep th
-
HP Omni 10 Tablet blocked at startup after change in BIOS
Hello I have the HP Omni 10 Tablet and I did change the Secure Boot setting in the BIOS that I wanted to install Windows 10 Technical Preview. After this tab change is stuck on the screen of "Change of operating system from the Boot Mode" and wants t