Mono Laser 2040 Brother printer model

Similar Questions

• Brother HL-2070N mono laser do not print and does not meet orders

  Original title: printer will not print. Just to sit down and idling, computor can see the printer, but the printer does not respond to commands

  Brother HL-2070N mono laser printer

  Hi BillSpiers,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  3. you receive messages or error codes?

  You can check out the following link and check if it helps to solve the problem.

  Printer in Windows problems

  Hope this information is helpful

• I tried to find this scanner for Windows Server 2003 Standard Edition software, but even now, I'm not find software scan. Printer model: HP 3390 Laser jet

  tried to find this scanner for Windows Server 2003 Standard Edition software, but even now, I'm not find software scan.
  Printer model: HP 3390 Laser jet

  I don't want the drivers.  I mean the software.  The drivers you get from the page server 2003 and the software from the page I referenced.   Otherwise, you need to contact HP, as they provide that software, not Microsoft.

  Steve

• Can you have configured USB and wireless printing simultaneously on mono Laser HP 1102w

  Hi guys / HP,.

  I was wondering if you have the configuration of p1102w printer HP mono laser for both cable USB2 cable to laptop and wireless at the same time.

  Try to install the printer with the two configurations via the installation on my HP Pavilion dv6 laptop CD.

  Because when you install the printer CD, he asked for one or the other i.e. USB or wireless.

  Y at - it an easy solution.

  Concerning

  Mike

   

  [Content removed]

  Hello

  You should be able to connect the two, but not Ethernet and wireless at the same time.

• Impossible to get brother printer to run on windows 8 model is MFC 685 - CW... also can't download itunes... Help, please!

  Impossible to get brother printer to run on windows 8 model is MFC 685 - CW... also can't download itunes... Help, please!

  Hi Dominic,

  I understand that you are unable to respond to this thread and created a new thread.

  As restart the print spooler does not solve the problem, please reinstall the printer and then check if that helps.

  Check out the following link to resolve the problem of iTunes.

  http://support.Apple.com/kb/HT3204

  Hope that the information provided is useful.

• I have an Emachine and a Brother printer, cannot install the printer

  I have an Emachine with Vista, AVG security.   Had a Brother printer.  Printer has worked one day, wouldn't work next day.   Computer won't let me uninstall or reinstall, nor can I do a backup now.   Took and said it was the printer, the new printer, same story.   What is going on.   I am po'd when I call a number of aid and get some yahoo in India.

  Hello

  1. what exactly happens when you uninstall and reinstall the printer?

  2. you get any error message?

  3. how you try to install the printer drivers? (With the help of CD or by downloading the driver)

  4. What is the number of the printer model?

  5. What is the model number of the printer that you bought?

  6. How are you trying to backup?

  7. are you any errors during the backup?

  Please see the article mentioned below.

  http://welcome.solutions.brother.com/BSC/public/us/us/en/FAQ/faqp/000000/001500/000009/faqp001509_000.html?reg=us&c=us&lang=en&prod=ql1060neus

  Please download the removal of printer tool suitable for the model number of your printer

  Click on the link below.

  http://welcome.solutions.brother.com/BSC/public/us/us/en/FAQ/faqp/000000/001400/000038/faqp001438_000.html?reg=us&c=us&lang=en&prod=ql1060neus&cat

• Brother print driver problem

  Am tryint to install the control for a Brother MFC-9440CN Center, but guard give the error message - says need to install the Service Pack of Windows (R). Sought something like Microsoft and seems to not exist. Have you tried the other recommendation here: all programs... Updates Windows - Update of other things but does not solve this problem. Does (R) service pack exist? Does anyone have a link where this exact service pack can be downloaded? It's ridiculous how much time gets lost trying new softward FIX so that I can actually do my job. MICROSOFT - 1) provide a quality product 2) provide support for accessible customer.

  It seems that this printer driver was intended for a previous version of Windows.

  I suggest that get you the latest drivers for Windows 7 for this printer model.

  You can also run the troubleshooting of the printer.

  Open the printer Troubleshooter

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems: http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

  Also, try to install the driver software of printer in compatibility mode, do a right click on the file executable/installer driver-> properties and select the Compatibility tab. Click on the box to check run this program in compatibility mode for option and select Windows Vista from the drop-down list. then try to install the device driver using run as administrator. In addition, you can use the Windows XP driver for the tests.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• I have a brother printer mfc which was yesterday scanning & now the printer does not connecct to pc... Help someone

  To have a printer brothers for a while... until yesterday would not connect to the pc for scanning.checkedd connections programming.

  HI Milton,

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, you are having problems with the printer connected to the computer.

  1. What is the model of the Brother printer?

  2. don't you get error message when the printer is not connecting to the computer?

  Run the printer Troubleshooter and check if that helps.

  Open the printer Troubleshooter

  Answer to us if you are having problems with connecting to a printer or any other problem of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• When I try to enter my printer model to find the drivers on the HP support site input panel disappears. It of OK in the previous versions of Firefox, but not in 18.

  I tried looking for driver for printer HP web site. When you go to the support page you are presented with 3 options. If you click on the first to search for drivers a billboard has an input box to enter your printer model appears. When I click on this Panel input box disappears.

  Try Firefox Safe mode to see how it works there.
  
  A way of solving problems, which disables most of the modules.
  
  The problems of Firefox using Firefox SafeMode

  When in Safe Mode...

  • The State of plugins is not affected.
  • Custom preferences are not affected.
  • All extensions are disabled.
  • The default theme is used, without a character.
  • userChrome.css and userContent.css are ignored.
  • The layout of the default toolbar is used.
  • The JIT Javascript compiler is disabled.
  • Hardware acceleration is disabled.
  • You can open the mode without failure of Firefox 15.0 + by pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
  • Or use the Help menu option, click restart with the disabled... modules while Firefox is running.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.

  If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

  When find you what is causing that, please let us know. It might help others who have this problem.

• el capitan running have to restart my computer to hp laser jet 4050 print every time

  I reinstalled the drivers, reset printing system, whenever I reload I can print a hp jet 4050n laser work.  Printer Watch sometimes printer offline, sometimes the State tells the sending to the printer never goes to the printer.  Restart and I can print a single job.  Help

  Me too, since 10.11.4 updated. I think it is a driver problem. Have another printer connected to the computer, it works fine.

• On the mac does not... and Brother printer does not print

  I think this goes back to my installation of El Capitan, but I'm not entirely sure. I do not use my iMac very strongly, as it was purchased as a family computer to replace one another iMac which was about 8-10 years of age and just couldn't keep up with software updates more. It lies in our dining room and gets probably one or two times a day in the evening to access the web and do basic home computing tasks.

  In any case, I have two problems that have become worrying and annoying. 1. "about this Mac" does not open. Nothing happens when I try to select it. (Choose "System Profiler" utility does not work also, but it gives an error message that says: it can not be opened). 2. My Brother HL-2280DW printer do not print, but this interferes with a message "Filter failed" when I try to print anything.

  Any thoughts on the resolution of these issues? I have read several posts here from people with similar problems, but nothing I've done has solved a problem. I have reset the time system 2 or 3 printing AND updated my database of website of Brother printer drivers, but I still get that filter has no message.

  A little more details on my system - there are three users currently put in place. My husband has two user accounts (both with permissions 'standard') which should really be combined somehow, but I took no steps to do yet because I want to get these other issues ironed out. My user account is the admin account. I mention this because I tried to access "about this Mac" and printing of all user profiles three and no thing works in one of the profiles. Regarding the statistics of the system, it is a 21.5-inch iMac bought in April 2015 with the following configuration:

  •	2.7GHz Quad - core Intel Core i5, Turbo Boost up to 3.2 GHz
  •	16 GB 1600 MHz DDR3 SDRAM - 2X8GB
  •	1 TB drive merger
  •	Intel Pro Iris graphics card

  I use a WD My Passport Ultra drive for backup with Time Machine, but it is not currently connected. I have a backup successful yesterday then I would be willing to work on any change of system that might be needed to solve these problems. I really don't want to have to reinstall the operating system, but I will if it is necessary. Thanks in advance for the help with this!

  Reinstall El Capitan without erasing the drive

  HD recovery start: restart the computer after the ring, press on and hold down the COMMAND and R until the menu screen appears.

  Repair the hard drive and permissions: at startup, select in the main menu disk utility. Repair hard disk and permissions as follows.

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click first aid button in the toolbar. Wait until the operation is complete, then quit disk utility and return to the main menu.

  Reinstall OS X: Select reinstall OS X and click on the continue button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than Wi - Fi and more reliable.

  
  

• Cannot print on a Brother printer after Windows Update

  We share the same brother MFC-8660DN on a network (Win XP x 4 & Win 2008 Server x 1), everything was fine until yesterday (16/09/10). 2 XP computers cannot print (Status: printing error) just after the recent update of windows installation (windows auto update has been set for each week). When we tried to print to the brother printer, he would be stuck in queue for a minute and a bubble pop up "document cannot be printed." 2 computers work fine otherwise. Everything works normoally and can be printed to another printer like Canon. (PS: I tried to uninstall and reinstall the brother printer driver, but no luck the question of setting)

  On the other hand, the other 2 XP did not have an update, and so they can't always print on the Brother printer. Also, Win 2008 server doing a windows update auto but print very well so.

  Therefore, I believe that the update of windows XP must have something to do with the printing error. Is there a fix or update? Alternatively, we can uninstall the recent windows update (only one?) to solve this problem? I'm not sophisticated OS, do not know what could be uninstalled. Help, please!

  I received a call from a client 2010-Sep-16 that they could no longer print
  on a network printer from any workstation.

  Workstations have Vista Business 32 and have been updated morning of September 16.

  The server is Server2003 & printing it still worked well.

  Printers using IP ports very well for more than 2 years.
  Fix was to use instead of the intellectual property & create ports with the full share name.
  
  The IP address of the printer had not changed AND
  I couldn't always navigate with IE8 (using IP address)
  printer see printer configuration data

  Workstations are Server 2003 domain

  This trick of name full-fledged was how I had to put in place
  Vista Home Premium workstations
  to use network printers in home networks.

  Why Vista Business "updated" settings for Home Premium?
  Is this a permanent 'update '?

  Why no matter what version of VISTA do this?
  Windows 7 has the same problem?

  With Vista Business 32 (short-term)? solution was to change the port to a local port with full sharing of the printer name

  See you soon

• HP Laser Jet 3800 printer: black spots on HP 3800 verticals

  Hello

  I have a HP Laser Jet 3800 printer that has started having black smudgess on each print out.  I did all the cleaning, I can think.

  Now I think the replacement of the fuser or belt transport.

  Any suggestions?

  Please see image.  It is very important at the bottom back to the center of the page.  Thank you.

  

  It looks like a faulty black toner cartridge for me.

  If you open the printer and move the shutter, so you can see the drum in the black cartridge has a film of toner on it? (if so, you must replace it).

• HP Laser Jet 4250 printer: 2 computer connected to a HP laser jet printer

  I have a HP Color laser jet 4250 printer.  It has a USB HP (not the typical style of the USB) and a compatible port IEEE 1284 b also.  Can I connect 2 computers using these two ports without hurting the printer?  If so, the two computers can print to the printer and have the printer queue work?

  Hello

  It is a very old and very good printer. How can you find a job for parallel port is another story, but the statement, you can use the USB connection or parallel to share. It has an embedded print server, HP Jetdirect Fast Ethernet integrated so my suggestion: it allows to connect to more than 1 computer:

  

  Kind regards.

• I have a Brother printer. I have almost a full black cartridge, but have more color. Printer tells me that I can not print, but is there a way to get around this? I should be able to print in black only.

  I have a Brother printer. I have a lot of black ink, but am very low on color. The printer always tells me that I can not print even if I press the black and do not want to use black to print a document of law. Is there a way to get around this?

  You must ask brother if this is possible or not.