month of data is missing answers

Similar Questions

• The configuration of your Pc startup data is missing or contains errors: 0x000014c error code

  Hello

  See if any body can help here... I get this blue screen:

  ************

  RECOVERY

  Your PC needs to be fixed:

  The Configuration of your PC startup data is missing or contains errors.

  file:\\EFI\Microsoft\Boot\BCD

  Error code: 0xc000014c

  You will need to use the tools of recovery on your installation media. If you do not have any installation media (like a disk or a USB device), contact your system administrator or the computer manufacturer.

  Press ESC for UEFI firmware settings

  ******

  First of all, I could enter option 11 and run the factory reset, I was so happy because I thought it won't be easy... but then after I did the factory reset... I get this blue screen. If I press ESC I get into this next screen:

  F1 system information

  F2 System Diagnostics

  F9 boot device Options

  F10 BIOS Setup

  F11 recovery system

  ENTER - continue starting.

  This is what happens when I click on one of these options:

  F1, I enter the system of information without any problem, then I click on to continue and return to the screen last... so I press F2 and super, I'm able to run the Test of memory and hard drive check 100% without any problem in one of those who, after that I'm done with my tests I press exit and I'm back to F1 , F2, menu etc... now I want to try F9, F10 or F11. disappointment in this option 3 I go back to the blue screen described at the beginning of this post. (I already plug in a USB key with a bootloader, which works perfectly)

  so I can't do anything, nothing at all! crazzines.

  So what I did to check why I can't enter BIOS or at least to boot from my USB... I removed the lid of my laptop botton and removed the hard drive and is then, how I was or I am able to log in the BIOS - I made the changes to start USB first, then the HD and that's how I was able to boot from USB - BUT if I connect the hard drive back I'm not able to enter the BIOS or boot from USB - so basically I'm stuck in this blue screen and I can't boot from a USB key, if I connected HD... I can't use any option... no BIOS, nothing... So yet again, I disconnect the HD.

  This is one:

  HP ENVY Sleekbook TS 4

  If you can't access BIOS with the HDD connected, you certainly won't be able to start on the recovery USB. This is indicative of a failing hard drive.

  Install a new drive hard and then start on the recovery key.

• I've been locked out of my email for a month! I remember the answer to my secret question and the default e-mail is the same address!

  I've been locked out of my email for a month! I remember the answer to my secret question and the default e-mail is the same address!

  Looks like you're talking about Hotmail? If so, please ask here.

  Windows Live Solution Center Forum Hotmail Portal
  http://windowslivehelp.com/product.aspx?ProductID=1

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• "windows failed to load because the nls data is missing or corrupted"

  IM currently using vista, and when I turn on my computer
  the following message appears: "windows failed to load because the nls data is missing or corrupted"

  What does this mean message?

  that means "nls"?
  is my information on my hard drive in danger?
  How can I fix?

  Recovery discs would be Windows Vista installation files.  It would be safe to use if they are needed when the sfc/scannow scanning.

  A recovery disc is a general term for media containing a backup State initial factory or a favorable condition of a computer such as configured by an OEM manufacturer or an end user. OEM supplied recovery media is usually comes with most computers to allow the user to reformat the hard drive and reinstall the operating system and preloaded software as it was when it was shipped.

  http://en.Wikipedia.org/wiki/Recovery_disc

• How to get LASTDAY for each month between data dates...

  Hi friend
  
  I have a doubt, how to get LASTDAY for each month between data dates...
  
  for ex:
  My contribution will be like this
  date = 01/12/2011
  To date = 14/04/2011
  
  And I need an output like
  31/01/2011
  28/02/2011
  31/03/2011
  
  is it possible to achieve through sql query in oracle
  Thanks in advance for all friends to help him

  Hello

  Something like this (assuming that the dates are originally VARCHAR2s):

  SQL> var dt_start varchar2(10)
  SQL> var dt_end varchar2(10)
  SQL> exec :dt_start := '12-01-2011'
  
  PL/SQL procedure successfully completed
  
  SQL> exec :dt_end := '14-04-2011'
  
  PL/SQL procedure successfully completed
  
  SQL>
  SQL> select last_day(
    2           add_months(
    3             trunc(to_date(:dt_start,'DD-MM-YYYY'),'MM'),
    4             level-1
    5           )
    6         ) as result
    7  from dual
    8  connect by level <= months_between(to_date(:dt_end,'DD-MM-YYYY'), to_date(:dt_start,'DD-MM-YYYY'))
    9  ;
  
  RESULT
  -----------
  31/01/2011
  28/02/2011
  31/03/2011
   
  

  If the dates are already of the date data type, simply remove the to_date function.

• Reg months start date

  Hello
  
  I wanto get months start date
  
  Example of
  
  August 12, 2010 23:00 and output should be 1st August 2010 00:00:00.
  
  Date of what ever I went it should come months start date
  
  With respect,
  L.Rajesh
  
  Published by: LRAJESH on August 17, 2010 01:50

  Multiple responses

  SQL> SELECT TRUNC(SYSDATE,'MM') FROM DUAL;
  
  TRUNC(SYS
  ---------
  01-AUG-10
  
  SQL> SELECT ADD_MONTHS(LAST_DAY(SYSDATE),-1)+1 FROM DUAL;
  
  ADD_MONTH
  ---------
  01-AUG-10
  
  SQL> SELECT LAST_DAY(ADD_MONTHS(SYSDATE,-1))+1 FROM DUAL;
  
  LAST_DAY(
  ---------
  01-AUG-10
  

• How to create custom payment terms ID with * TWO * fixed monthly payment dates - PS SCM 9.1 TR 8.51.08

  Hi all

  This is just about everything said. We have a new payable seller with a very strange terms setup: payments are due the 10th or 25th of each month according to the date of invoice - bills date to the 15e or be carried out before the 25th of the current month; Bills as of 16 or later are expected the 10th of the following month. Is there a way to PeopleSoft PT calendar codes to achieve (without personalization)? We currently use SCM 9.1 with 8.51.08 tools

  Thank you very much!

  Hi again

  You can ignore this investigation that I answered my own question (just using multiple synchronization codes in a single ID terms!)!

• Select records based on the monthly anniversary date

  Hello
  
  I have a table with a field of date_added and I want to select records from monthly birthday of this field.
  
  for example. ID, Date_added
  1, DECEMBER 10, 2012
  2, 11 NOVEMBER 2012
  3, 10 MARCH 2012
  4, FEBRUARY 28, 2012
  5, 30 DECEMBER 2012
  
  So for January 10, 2013, I would like to return the documents 1 and 3 only
  
  I started watching the extract function, but this little falls down to the records at the end of the month. For example, on 28 February, I also include records where 29, 30 or 31 is the day of date_added. So, in the above table, I won't return documents 4 and 5, but retrieves only returns 4.
  
  Is there a simple function to make the request of birthday this month - have I missed something very obvious? Or I have to write a query to explicitly dates at the end of the month? So far I have not found a reasonable solution!
  
  I use 11g
  
  Thank you

  user11259857 wrote:
  Hi Al,.

  No I don't think that there is a flaw. For example, the 30 Jan is not the last day of the month, but is June 30. Thus, on 30 January I want only to interrogate all the dates falling on the 30th - 28 February, after already being interrogated on the 28 Jan. However, on 30 June, I would query the 30th of each month, as well as the 31 January, March, may, July, Aug, Oct, dec. February is a special case, being both shorter and a leap year

  Thank you

  Richard

  Hi Richard,

  so, we can assume that your needs are:

  If the day is the last day of that month, interview the day of the other months being > = day of the current month.

  That is to say:

  Jan-30 = query only 30 other months
  Jan-31 = query only 31 of the other months

  Feb-28 (non-leap years) = question 28, 29, 30 and 31 other months
  29 February (leap year) = query 29,30,31 to other months

  Mar-30 = query only 30 other months
  Apr-30 = query 30 and 31 other months

  This hypothesis is correct?

  If so, then something like this should work:

  WITH mydates(id, date_added) AS
  (
     SELECT 1, TO_DATE('10-DEC-2012', 'DD-MON-YYYY') FROM DUAL UNION ALL
     SELECT 2, TO_DATE('11-NOV-2012', 'DD-MON-YYYY') FROM DUAL UNION ALL
     SELECT 3, TO_DATE('10-MAR-2012', 'DD-MON-YYYY') FROM DUAL UNION ALL
     SELECT 4, TO_DATE('28-FEB-2012', 'DD-MON-YYYY') FROM DUAL UNION ALL
     SELECT 5, TO_DATE('30-DEC-2012', 'DD-MON-YYYY') FROM DUAL
  )
  SELECT id, date_added
    FROM mydates
   WHERE (:input_date = LAST_DAY(:input_date) AND TO_CHAR(:input_date,'DD') <= TO_CHAR(date_added, 'DD'))
      OR TO_CHAR(:input_date,'DD') = TO_CHAR(date_added, 'DD');
  
  with input_date = 28/02/2013
  
  id   date_added
  4    28/02/2012
  5    30/12/2012
  

  Kind regards.
  Al

  Published by: Alberto Faenza on 10 January 2013 15:21
  Added example

• Create log of three screws - sometimes the data are missing

  Hello

  I have three screws measure in parallel in a loop

  Three results are saved permanently to the global network and also in a text file.

  The berries-global has always all the data, but in the text file is missing some data.

  I think it is because the file is locked to a vi, while the other vi wants to write its data.

  What can I do here?

  Something like writing data in a queue and an another vi reads the queue and writes the file?

  Or y at - it something like a "checking if the file is in use" - property? Then I could wrap up the only unused before running writing?

  Thank you

  Yes, writing data to a queue is the perfect solution. Quick access to the sender, writes the author in his own pace and no missing data.

  /Y

• I need help to get back on facebook! I asked to change my password more than a month and can't always answer their questions of code just so that I can join!

  HELP ME PLEASE!

  I tried to reset my password facebook more than a month and I can't get it fixed. I just want to be able to get back on my account and enjoy. I don't mind giving my phone number to someone who will address this problem seriously. Let me know as soon as possible!

  
  

  Hello

  Please contact the Facebook Support.

  Facebook Help Center
  http://www.Facebook.com/help/

  How can I contact Facebook support?
  First, select the subject of your question of "list of topics".
  Then select the appropriate contact form or answer your question in this section.
  http://www.Facebook.com/help/?page=835

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• LifeLog only show the past 3 months of data.

  My Lifelog is only show my data in the last three months. Can someone please?

  Thank you very much.

• The month names of the missing events calendar...

  I recently syched my Google calendar that contains events, but events appear only in the day or week on the calendar view. Is there a way to show that a day contains an event using the month view? I tried what allows to disable some calendars, but nothing appears in the month view in all. The only way to get an event to display in the calendar month view was entering a new event, and then it shows a gray bar above the date in month view. Is it the same on everything everyone elses Palm Pre?

  in the monthly view, you should get a gray bar when you have an event for that day. Events more you have the more bars. If you have an all-day event it will not give you a bar however.

• Extraction of repetition of calendar events: monthly repeat dates wrong?

  Hello

  I extract the calendar events using the (approximately)

  try { elem = el.items(EventList.STARTING,
                         _currentTime - (long) TZOffset,
                         _currentTime - (long) TZOffset + YEAR,
                         false);
  } catch (PIMException pe) {
  //    System.out.println("*** Could not get Event enumeration");}
  
  ...
  
  BlackBerryEvent bbe = (BlackBerryEvent) elem.nextElement();
  

  Follow-up by...

  try {
          rule = bbe.getRepeat();
  } catch (Exception e) {
  }
  
  if (rule != null) {
  
           Enumeration edates = rule.dates(sdate,
                                           _currentTime - (long) TZOffset ,
                                           _currentTime - (long) TZOffset + YEAR);
  
           if (edates != null) {
                     if (edates.hasMoreElements()) {
                           edate = ((Date) edates.nextElement()).getTime();
                     }
            }
   }
  

  It seems to work very well in what he shoots dates for all recurring events in the appropriate range.  But monthly recurring events, the event dates are shifted to a date (exactly 24 hours after setting for TZ offset); weekly and annual repetitive occur on the correct date.

  Has anyone else seen elsewhere?

  I'm developing in OS5 and tests on OS5 and OS6 devices.

  Thank you.

  I have it. I need also add the TZOffset to the first argument of dates().

• Add a month to date

  How can I add a month to a date? DateTimeUtilities.ONEMONTH adds only 4 weeks.  How can I add for example one month to January 1, 2012 to make February 1, 2012 (not January 29, 2012)?

  You may need to consider separately the month-days 29, 30 and 31. For example, adding 1 month to 30 January 2012 which is February 28 (1 day less than the end of the month), the February 29 or March 1?

  You can store the real day of the month separately and return either the end of the month, day (if the month is shorter) or selected the real day. This would add 1 month, each month and come always with the closest date to the desired day. For example, increment of 1 month at a time, you'd see 30 Jan, 29 Feb, Mar 30...

• "Boot Configuration data are missing some required information.

  Hi, my phone displays the message above on my toshiba L50b title.

  File: \BCD

  Error code 0 x 0000034

  I never received a recovery media device when I bought the computer laptop, is anyway for me to repair my laoptop to the internet?

  Thank you!

  Dot

  Hello

  Please follow the fix mentioned here, in accordance with your request, you must first create the system recovery disk:

  http://www.kapilarya.com/fix-the-boot-configuration-data-file-is-missing-some-required-information

  Hope this helps, good luck :)