More memory would really make a difference?

I am running Premiere CS4 on a 64-bit of Windows Vista with a quad core and 4 GB memory processor computer.  No matter what I do in CS4, effects of rendering first to the conversion of a file in Media Encoder for video transcoding for a blu - ray disc in Encore, player I see the same thing in the performance section of the Manager of tasks - all four cores in my CPU to 100% and a maximum of 3 GB of memory used.  Given that my system won't use more than 3 GB of memory for any task, is there no profit to move to 8 GB of memory?

J. D.

Even if you don't have a card capable of MEPS, but did say 12 GB of memory, you can see an improvement in performance by about 30%. This has been demonstrated with the older PPBM4 benchmark.

Tags: Premiere

Similar Questions

  • About the RAM, I have 32 GB...... is there any advantage to allocate a large amount of this, or is there a limit that really MAKES a DIFFERENCE...?

    About the RAM, I have 32 GB...... is there any advantage to allocate a large amount of this, or is there a limit that really MAKES a DIFFERENCE...?

    @

    It depends on what you are doing and the rest of your system.  Eventually, if you like the video, it will impact.  But for still images, it is unlikely you will come anywhere close to that.  You can check it by placing the bar at the bottom left of the screen to show effectiveness.  As long as you use only RAM it will say 100%.  If you go below, you use your drive to work.  But even in this case, use to scratch a little, if you have an SSD, is not a big deal.

    Even my laptop 8 GB rarely gets bogged down (but I close the old files).  My 16 GB Office doesn't happen nearby.  But I'm not video.

  • Do not see a difference with more memory...

    Hey all,.

    I upgraded to 16gig 8gig and don't see any difference in render time or anything either.

    Is it possible to see if the memory makes a difference?

    Thank you
    Al

    Activity monitor in the utilities operating system. Additional RAM won't really increase rendering speed. You may see improvement if you are working with still images in a large format or with titles 3D project. 16 GB is a good number. It gives you a lot of flexibility, especially if you need to switch between multiple applications such as compressor or Motion or affinity Photo Pixelmator. According to the effects that you treat the real difference in speed will show in improving the GPU and increasing VRAM.

  • It would make a difference with the network to change to Wireless Broadband?

    original title: Iam moving so I had Internet & cable t switch now I use Wireless Broadband would be - that make a difference with the network?

    Just need to know if from cable Internet broadband wireless to have an effect on my computer >

    as with the network, I know that I have to change my USB connection?

    Hi pattylopezSP,

    See these articles for more information on the wireless connection.

    5 steps: how to set up your network wireless home

    Wireless network card: frequently asked questions

    The network connection is based on the Internet (FSI) Service provider. Speed and other features depend on the tariff or package you are using. You can also contact the ISP for further assistance and information.

  • Hello everyone... I can't backup to my iPhone since I upgrade to IOS 9.2! I always received message "storage not enough ' in case I can't make backup"iTunes"because the message asking me for more memory!  I have space on my Mac 17 GB!

    Hello everyone... I can't backup to my iPhone since I upgrade to IOS 9.2! I always received message "storage not enough ' in case I can't make backup"iTunes"because the message asking me for more memory!  I have space on my Mac 17 GB!

    Storage icloud and Mac local storage are two different things, it does not replace the other.

  • I downloaded a Coded for Movie Maker and tried to play a YouTube clip to edit and it shows nothing happening just the clip. If anyone can help I would really appreciate it

    I downloaded a Coded for Movie Maker and tried to play a YouTube clip to edit and it shows nothing happening just the clip. If anyone can help I would really appreciate it

    Hello

    I suggest you follow the link to import files into Windows Movie Maker below:

    http://Windows.Microsoft.com/en-us/Windows-Vista/importing-files-into-Windows-Movie-Maker-frequently-asked-questions

    I also suggest you check the Web site software codec for further assistance, or try another program to convert the files.

  • Yesterday, I have installed, CS4, on, one, new, computer and it, works ok, EXCEPT, I, no, more, have, Contact, sheet, maker and, me, oblong, have, package, print, developer, both, I have, really, need, bogus, v e, help?

    Yesterday, I have installed, CS4, on, one, new, computer and it, works ok, EXCEPT, I, no, more, have, Contact, sheet, maker and, me, oblong, have, package, print, developer, both, I have, really, need, bogus, v e, help?

    Are these third-party plugin, actions or scripts. If they are you need to install in CS4. On this new machine.

  • Upgrade memory will make the difference in the performance of the laptop Toshiba NB?

    IT WILL MAKE A DIFFERENCE IN PERFORMANCE IF I MOVE NY LAPTOP 1 GB TO 2 GB?

    Yes, it will be.

  • Help! How to get more memory?

    My computer always indicates a not enough space on OS C.  Have done disk clean up, deleted files and programs, but said still is not enough memory.  What can I do else?  Please instruct me in layman's terms, as I am not the most computer.  Thanks in advance for any help.

    Space and memory are two different things.

    Space vs memory explanation

    When it comes to a computer, there are so many computer terms like MHz, RAM etc that people may find confusing, gigabytes. Having a better understanding of some of these terms can help you feel more comfortable using your computer and ultimately get more out of him.

    A lot of people I talk to seem to be apologetic about their lack of knowledge. It's too bad people feel this way. they shouldn't really. What I tell them is that, although they do not know as much as I do on computers, there is nothing wrong with that, and they probably know a lot of other things that I don't know much.

    What you need is someone who takes the time to explain things in a way that makes sense.

    A term many people confuse memory or RAM and hard disk storage space is. RAM stands for Random Access Memory (don't worry, you do not need to remind that!).

    It's a temporary workspace, the computer uses to get the job done, which gets emptied when the computer is turned off.

    Think of it as a work bench or table. You have a project that you are working on and do you your project on the bench and when you're done, you delete it off the coast.

    The disc is the main place of your computer uses to store information. It looks like a rectangular metal box containing a hard drive (as opposed to something like a CD player where you can remove the drive).

    It's a disc inside the drive that stores everything on your computer - each photo, each music file, every e-mail and every Word document. Not only that, but Windows or Mac OS X, the operating system that makes the computer run.

    To continue our analogy, think of it as a set of shelves where you store tools or materials for your project when you want to work on something, you choose the things you need on the shelves, put them on the bench and working on the project.

    It of like when you run a program; the computer to load the program from the hard disk in memory (the temporary workspace).

    So more shelves, plus you can store - that is to say programs more can you install, the more songs or photos or videos, you can save on your computer.

    Most people with a computer in the last years are tougher than they will ever use. Few people ever the charging, unless they hold a large number of large files such as audio files or images or video files in particular.

    A picture is worth a thousand words, they say. If it's true, video is worth at least 1 million words and files can be that much bigger!

    If someone tells you that you have need of more memory, or your computer gives you an error to be low on memory, this usually means that you don't have enough RAM. This can significantly slow down your computer.

    Consider the idea of bench again: If your bench is very small, you can't hold it need make your work, so you are constantly losing time move a piece of the project to the bench to make room for the next piece... If you really work at all.

    The RAM and disk space are measured with the same terms: bytes, kilobytes (KB), megabytes (MB), gigabytes (GB), with newer drives even being measured in tera-bytes (to). As the RAM and hard drives are measured in the same way, it is perhaps one of the reasons people are confusing the two terms.

    You don't need to understand exactly what these terms mean, but understand that each of them is essentially a thousand times larger than the previous. So a kilobyte is 1,000 times the size of a byte, a megabyte is 1000 times larger than a kilobyte, a gigabyte is thousand times later than that and so on.

    The reason you buy a computer, one that has a lot of RAM and two or three years respect and all of a sudden someone tells you that you don't have enough memory, because every year, size average programmes and the amount of memory they need, expands.

    It's as if the tools you use on your Workbench continue to grow each year in order to have afterwards get a larger bench.

    If your computer seems to work more slowly recently, or if you have had bizarre mistakes, it could be that you need to upgrade your memory. This is not always the source of these problems, but RAM is cheap these days and add to what your computer can add life to your Mac or PC.

    I hope that this clears up the meaning of these terms the basic computer for you and makes much more sense than before! To learn more about the RAM and memory, read related article that explains how RAM affects the speed of a computerand more.

    `~`

    http://www.Google.com/#gs_rn=18&gs_ri=psy-AB&CP=7&gs_id=q&XHR=t&q=page+file&es_nrs=true&PF=p&output=search&sclient=psy-AB&OQ=page+fi&gs_l=&PBX=1&BAV=on.2, or.r_qf. & bvm = bv.48572450, d.cGE & fp = d9f7c8d7788ea4ef & biw = 853 & bih = 561>

    http://www.Google.com/#gs_rn=18&gs_ri=psy-AB&PQ=page%20File&CP=17&gs_id=14&XHR=t&q=memory+management&es_nrs=true&PF=p&sclient=psy-AB&OQ=memory+management&gs_l=&PBX=1&BAV=on.2, or.r_qf. & bvm = bv.48572450, d.cGE & fp = d9f7c8d7788ea4ef & biw = 853 & bih = 561>

    `~`

    The time and date of this moment in California, the United States is 14:12

    Sunday, June 30, 2013
    The time Pacific daylight time (PDT)-0700 UTC
     
    UTC/GMT is 21:12 on Sunday, June 30, 2013
                
    Current weather conditions in Los Angeles

    Just92 ° F / 33 ° C
  • DOES MAKE A DIFFERENCE WHAT ROUTER I BUY IF I PLAN ON WIRED NETWORK

    First OFF... Please excuse my lack of computer savvy.  I know just enough to get me in trouble.

    I have two computers in the House that I intend to run the my modem cat6 cable cable on a new router (type advice pending) then on my two computers.

    I am connected to Comcast high-speed internet cable and you just want to connect two computers at home, with the fastest speed available.  I was told to buy a less expensive router and it would work just as well as an expensive one.  As long as it is hard wired it won't make any difference in speed.

    Sounds easy, I get good advice?  If anyone has the time, I would really like to get this resolved so I can buy a router and configure my network.  Any advice on what router buy would be really appreciated.

    Thank you, Sunshine State

    1. make sure that your modem is only a modem and not already a router. Some ISPS 'modems' are in fact roads with built-in modem.

    2. most current routers should be able to handle the current speeds of the Internet standard. Only if you have a very fast internet connection or intend to buy an older model, it is perhaps not able to manage your Internet speed. Check a Web site like smallnetbuilder for speed trials.

    But that would make almost any router.

  • Upgrade a Dell Inspiron 531 to something with more memory and faster?

    Hello, I have a Dell Inspiron 531, 32-bit operating system, and the 3G memory in it but is Vista. I tried to upgrade to Windows 7, but after many attempts, could not go without having to clear everything and start over. So I'd do it if I have to do I was wondering if I could make the machine that is more memory better and faster, without having to buy a new computer say a Dell XPS 8300 (that I'll have to run a lot of photographic software in the future and I understand that this could be a good computer for that?) In any case, it is possible to 'upgrade' the computer something like this please, or I have to save my pennies for a new? Thank in advance for your advice.)

    Hello

    If you upgraded to 4GBs off RAM you won't get many benefits

    Here is an article on what is happening with 4GBs of RAM:

    http://support.Microsoft.com/kb/929605

    "If a computer has many features implemented, the available memory can be reduced to 3 GB or less." However, the maximum memory available in 32-bit versions of Windows Vista is typically 3.12 GB. »

    and you should also consult the Dell manual for your model desktop computer see what amount of RAM your motherboard would answer anyway

    http://support.Dell.com/support/topics/global.aspx/support/my_systems_info/manuals?c=us&l=en&s=Gen& ~ CK = anavml

    and here is the reason why you can not upgrade to Windows 7

    There are no Windows 7 drivers written for her by Dell

    http://support.Dell.com/support/downloads/DriversList.aspx?c=US&l=en&s=GEN&ServiceTag=&SystemID=INSP_DSKTP_D531&OS=WLH&OSL=en&CATID=&impid=

    Click on the menu at the link above drop-down operating system

    itonlt has XP and Vista drivers available

  • Add more memory

    I am currently using a Pavilion DV6000. Currently, it has 512 MB of memory and have considered really upgrade to more memory because its quite slow to load things. After you open Itunes and use the internet at the same time are quite difficult for her as well. Upgrade to 2 GB of memory will be a great help? My hardrive is also very complete. A full hard drive slowing down the computer as well right?

    Ok thank you. So, just to make sure I get the memory, here's my laptops card:

    http://support.HP.com/us-en/document/c00770899

    and the memory that I find appropriate for my computer:

    http://www.shopping.HP.com/store/product/product_detail/FQ858AA/1?JumpID=in_r329_personalization/browse1/landing_PDP

    is it good?

  • DB face memory pressure and need more memory?


    Hi all

    DB: 10g and 11g

    Need your advice.

    We provide the server db use memory and cpu management report on monthly basis.

    Average usage of memory the server is more or less the same each month that memory allocated to oracle is capped (for example, memory_target).

    Therefore, we will not be able to tell if the memory allocated to the sufficient DB and when does more memory?

    We are required to provide a usage report to show that the memory allocated to the database itself is enough on monthly basis and does not need to bulk up.

    Is there a good way to provde this?

    Our DBs are all OLTP and rarely do full scan.

    First thought to provide the trend of BHCR (above 90%, this means memory is sufficient). Read a large number of documents that BHCR is no longer useful.

    A better way to do it? Kindly share your experiences.

    Thank you

    You can keep in mind what the different parts of the memory.  The SGA is a shared resource, which includes the areas of code and data, and even those who can interleave in pressure of circumstances.  The PGA is determined by the use of the users.  The trend of the latest versions of Oracle is spending more major requests for data at the PGA, but which cannot affect you much if you're like really OLTP, as you describe (which one silent report or batch could blow).  So really, after getting the right CMS, the PGA is more likely to be affected by the increase in the number of users.  Mechanisms of the target to be fairly stable systems (as well as assignments of similar resources carried out by reasonable operating systems) translated well enough glancing SGA and PGA advice and after it.

    Using the resources on a system close to their means of amount maximum, there are times when performance will go downhill fast, simply because of a resource to bite.  (For a good time in mathematics, see the white paper to think clearly on Cary Millsap's performance.)  These types of problems can come from many sources, if a regime change, hardware malfunction or a simple increase in its attendance.  Those who dance near the line will inevitably have to step on it, or some such maxim comes from jurisprudence.

    So the desire of the management of the Non-becassine-hunt is to anticipate and avoid such problems without too much purchase hardware or compulsive, disorder of tuning.  The idea is to make an analysis of trends which allows to predict that an increase in its attendance will make things down a steeply, to do what is necessary to avoid it (or at least expects).

    Oracle has a report to do this?  Not really.  There are too many variables and too many ways to use and abuse a system.  Most performance problems are SQL issues.

    What you can do is to simulate accurately the workload on a test system, increasing its failure.  This as an exercise in iterative parameterization can give a good idea of what settings are required in order to maximize what you can use and an idea what kind of use will start demanding more material.  For a well designed system, it can be as simple as looking at the number of users and uses of the pga.

  • Does not start, need more and more memory, then crashes. It is SOLVED by deleting DB, panacea.dat, foldertree.json CAUSE global messages: uknown

    As a user of Thunderbird long term (currently version 38.2.0 on Win7 x 86 US) today, I caught myself (negatively) by the following problem: at the launch at the start of Thunderbird, the window will appear last closed (and for a short while, I see my files, etc., as left behind, during the last closure of Thunderbird), but then it turns into State "Not responding" (nothing works). When we look in the Task Manager, I see that Thunderbird seizes more and more memory, before this date - after a few seconds - crashing. I really hope that for some help fast, if possible (I desperately need a solution for e-mail job well - ideally the one I had, i.e. Thunderbird with my settings).

    What I tried:
    -Uninstall Thunderbird and install it again (did not help)
    -Uninstall Thunderbird and install an older version (I tried 38.1.0, 38.0.2, and 31.8.0 - nothing has worked)
    -from Thunderbird in SafeMode (same problem)
    -from Thunderbird in safe mode of Windows (same problem)
    -from Thunderbird in offline mode (did not help)

    My main question to know how to solve this problem, includes questions such as
    ? Should I try to delete some files of Thunderbird and try again (which ones?)?
    ? Can I use a command line "tricks" to get Thunderbird started?
    Etc.

    Thanks for your help!

    I think I solved my problem: delete messages from global reach DB and panacea.dat foldertree.json helped - once Thunderbird started again interactively and now I can restore my data files/messages.

  • I use Adobe Photoshop CC 2015 and it takes a long time to open... too long!  How can I allocate more memory to the program photoshop - I have a lot on the computer, but photoshop is a great program and needs more juice - need help!

    More memory to an application.

    Hello...

    Try not to have too many applications running at the same time, you use Photoshop. Freeing system resources.

    Adobe recommends up to 8 GB of RAM here > https://helpx.adobe.com/photoshop/system-requirements.html

    You can see how much memory is installed on your Mac by clicking on your Apple  menu then click on about this Mac, then make sure that the "View" tab is selected.

    The amount of RAM is installed on your Mac is noted here.

Maybe you are looking for

  • Photosmart c4795: impossible to FIND MY PRINTER UNINSTALL PROGRAM

    I want to uninstall and reinstall my printer, but it is not in my uninstall programs. What is HP Photo creations, HP Support Solutions Framework and HP update. It appears in my devices and printers with a yellow triangle next to her. When I installed

  • Analysis of fabric

    iMac El Capitan and Epson XP312 printer/scanner I just scanned samples of tissue in my (new) quilt design program but, although the color looks OK at the stage of presentation, once I have scanner color similar to the originals. for example, the crea

  • AiO + HP LaserJet Pro 200 color MFP M276nw iPad app

    Hello. I am leaving the AiO iPad app recognize my printer M276nw. AirPrint printing flawlessy, so the HP power application only (it recognizes the printer and let me check for toner levels). There is no way to let the printer appear in the AiO Remote

  • Difficulties in finding devices on the PXI-1033

    When looking at the measurement and Automation devices explore my NI PXI-7853R and 128Mux (PXI-2532) seems to work very well. However, when you load a project, Labview FPGA the new project wizard displays the error: No PXI controller have been found

  • How to count characters in Notepad?

    I need to write a script in Notepad, and I also need to make sure I'm not more than 5500 characters. How to count characters? I can't find a button to do it.