More than 54% on my sony vio laptop battery!

Similar experiences / solutions please?

First of all, we need the OS name that your system is running. Anyway,.

Batteries have a load specific cycles and when they are finished, will not charge the battery. Batteries usually wear out after a year or two. Contact the manufacturer for a utility check battery.

Tags: Windows

Similar Questions

  • My Sony vio laptop doesn't recognize USB storage?

    My Sony vio laptop doesn't recognize USB storage?

    Is it a USB 'ding' heard when you insert the USB storage device?  If so, you then have to make right click on my computer, select manage, then disk management, look on the right side and the storage of the assign a drive letter.

  • Full version Windows 10 downloaded and installed more than 10 hours a day for laptop Windows 7 Service Pack 1

    Hello

    Currently, I have a laptop running Windows 7 Service Pack. Yesterday, 1 tried to download Windows 10 for more than 10 hours then turned to install for centuries. So, I stopped the installation. I wonder... can I know - is it normal to take some time to download and install Windows 10?

    Thank you.

    Task of pre-required

    When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

    • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
    • Reboot several times and try again.
    • Disable the general USB peripherals (for example - smart card reader).
    • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
    • Do a clean boot, and then try again.
    • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both and try the installation again.
    • If you update via Windows Update, when download reaches 100%, disconnect the Internet LAN (Ethernet) or wireless, and proceed with the installation.
    • If this does not work, try using the. ISO file to upgrade if possible.
    • If you are connected to a domain, go to a local account
    • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

      How to: upgrade previous versions of Windows using the file ISO for Windows 10

      How to download official Windows 10 ISO files

  • HP ENVY 17-j180ea: can I have more than 1 extra screen on my laptop

    I have a HP ENVY 17 - j180ea with the movement of jumping, I currently have a monitor connected to it, but I want to know if I can add a third. And what is the best option to do. It has only 1 hdmi socket and no other graphics only outputs.

    Windows 8.1

    Davidpne

    If your laptop only has a video output jack, you can only connect a monitor to this Jack.

    However, there are Video-to-USB adapters available that can connect monitors via VGA or DVI - according to the adapter.

    Understand, however, that you are limited to the bandwidth of the connector and the USB port.  You won't see the same resolution and the same performance with a monitor connected to a USB adapter, as you do with a monitor connected via a port VGA, DVI, or DP.

    Good luck

    I'm a volunteer and I do not work for, or represent, HP.
    ========================================================================
    If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

    If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

  • Can I put a PSE13 on more than 1 computer, for example, a laptop computer and a HP?

    Can I install PSE13 on several computers, for example, a gateway and a laptop?

    Yes, individual owners may install and activate, until, two computers at a time.

  • SVE1712Z1EB. IT1 SONY % life laptop battery.

    My Sony/Vaio Lap Top is 18 months old.

    I noticed that efficency of battery / life seems to have deteriorated. After 3-4 hours of connection charge to the electric power, the battery never reached 100%, but maximum load is only 80%.

    After that less than 2 hours of use without connecting the power supply, the battery capacity is zero e PC is turned off.

    It is a normal battery performance or is defective and should be replaced by deepening?

    Thank you

    LCNCGL

    Batteries deteriorate after a year or two and keep the load for shorter and shorter periods. The batteries are generally covered under warranty-not sure how long your warranty is. Most HP laptops have a warranty from 1 to 3 years depending on the model.

    Since it is a forum for HP, you can get more help in the Sony Forum:

    http://community.Sony.com/T5/VAIO-computers/CT-p/VAIO

  • Satellite L40-12 X - more than 2 GB of RAM?

    Hello
    I was wondering if there is any solution how to enable the support of more than 2 GB of RAM on laptop Satellite L40 12 X? I'm running Vista 32 bit, but each additional MB account...

    Jérôme

    Hello

    You already use the max RAM. It is based on the chip set. For Intel 943GML is 2 GB maximum RAM, you can use.
    I'm sorry.

  • Sony vio can't find the camera after installing Windows 7

    The system does not find the cam into my sony vio laptop once I upgraded from vista to window7

    The system does not find the cam into my sony vio laptop once I upgraded from vista to window7

    And Sony said they supported by your hardware that is found in this system in Windows 7 and they have drivers, that you can download for everything, right?

    Looking for this, right?

    Hardware support always has (probably will be always) come from the hardware manufacturer who has manufactured the product you are trying to use. Whether or not they provide the necessary software (drivers) for their device to be seen and used entirely (if at all) with a given operating system is (has always been) a decision * they * do. The manufacturer of the operating system (except if they are also hardware manufacturer) does not have this choice.

  • Battery blackBerry Bold 9900 Smartphones worsens more than 50% after 2406 upgrade

    My battery life Bold 9900 worsened considerably after the recent OS 7.0 Bundle 2406 set to level. I had previously struggled to spend the day on a battery, but in general, I could do it for a day and business general use of electronic mail, of limited calls and not Web browsing. Now, after the recent 2406 upgrade, I get only about 50% as much battery life. In addition, the black box of the small Center with white rotating second hand is now a function that comes back regularly throughout the day, and I had to remove my battery to restart my BlackBerry much more often. I've since removed all applications, cut back on all the other battery draining features (screen brightness, wifi, Bluetooth, gps, etc), moved to 2G to extend my battery life. I was already unhappy with the bad battery BlackBerry Bold 9900 life, but after this last update 2406, it is unacceptable for a professional use when it only works for 1/2 day. I hope it's a question of battery RIM known for Bold 9900 that is processed quickly. Otherwise, I am one of the many who will have to move to a more acceptable solution for phone smart business in a perspective of battery life. Thank you.

    Well, I have implemented battery BlackBerry 9900 technical of economy in this forum, and to my surprise, he solved all much more than I expected. My last load battery Bold 9900 lasted 6 days/86 hours (compared to less than 1/2 day) during normal use of business and weekend for the phone calls, emails, texts and the bbm, exclusion using the internet or applications. I moved 2 G + 3 g to 2G only, off all the apps (especially GPS, Google sync and social networks), turned down the brightness of my screen and shorten the waiting time, calendar, disabled wifi and bluetooth, etc. Thanks for all the comments in the forum. They worked. Now I will be slowly adding some applications and using 3 G on the internet once again, and I will more closely control my battery drain in the future.

  • The sony handycam dcr-hc30 can endure more than the 512 MB original memory? Thank you.

    The sony handycam dcr-hc30 can endure more than the 512 MB original memory? Thank you.

    According to this table of compatibility: http://esupport.sony.com/perl/support-info.pl?&info_id=11 DCR-HC30 may use the following maps:

    Memory Stick Duo Pro - 1 GB, 2 GB and 4 GB

    Mark 2 Memory Stick Duo Pro - 1 GB, 2 GB and 4 GB.

    You can read the table to make sure I was reading it correctly.

  • Can't scan at all & printer freezes my laptop is turned on more than 3 minutes?

    Can't get my Laserjet M1212nf MFP to scan anything at all, it freezes as my laptop, if it's on more than 3 minutes.  I connected via the USB cable to my laptop Dell under Windows XP SP2.  I tried to run the diagnostic tool, but it freezes and then gives me the same error message as the printer when I try to scan something.  The error message "sorry, but scan software needs to close." I also deleted the drivers and reinstalled times since the original CD & download from HP.com whenever it froze just my laptop once the drivers have been installed. I don't know what else to try?

    I know that it isn't a hardware problem, because the copy of the printer function works very well!  The scan bar is fail & before he come to scan and then send the data from my laptop.  So my guess is it's a software problem, but I'm not an expert?

    It has been so for about 6 mos now and I'm just trying to not use it much, but it's starting to annoy me that I spent so much on something that I can't use!  Can someone please help me with this?  Thank you!!!

    Wtdboss, sorry for not responding sooner, I was out of the country on a trip to visit his family in France.

    Looks like we can fix pretty easily. To be able to scan from your computer directly on your computer you need to activate the scan function in the software for your printer on your computer. This should be under Scanner or scanner Actions. This will give you your printer permission to access your hard disk computers and record the material there.

    I hope this solves this problem for you!

    -Spencer

    PS Hope you have a wonderful day and that your time is as beautiful as she is here!

  • Laptop is blocked at the installation of 10 out of 17 Updtes for more than three hours

    Laptop last night quit unexpectedly. This morning when I started the machine, it was locked to the installation of 10 of the 17 updates for more than three hours. I tried to turn off the machine, but I still get the same message. How do I get this at the end to restart properly

    Hello
     
     
    1. remember you number updates that have been installed?
     
     
     
    First check to see if there are external devices attached to the computer, if so remove and check.
     
    Method 1.
    Let us run repair system at this stage, it might solve the problem.
    See the following articles for additional help and steps on startup repair.
    Startup Repair
    http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair
    What are the system recovery options in Windows 7?
    http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
     
    Method 2.
    If the bows persists please verify if you are able to boot safe mode.
     
     
    If the problem exists not in Mode safe run mode startup minimum troubleshooting to find the root cause of the problem.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
     
     
    Method 3.
    I recommend you to restore system using a Windows 7 DVD.

    Here's how:
    To open the Options menu system recovery using a system repair disc or a Windows 7 installation disc
    If your system is damaged and cannot access the menu system on your computer Recovery Options, you can access it using the Windows 7 installation disc or a system repair disc previously.
    To use this method, you need to restart (boot) your computer using the disk.
    a. Insert the disc.
    b. restart your computer using the power button on the computer.
    c. If prompted, press any key to start Windows from the installation disc.
    o If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer.
    d. choose your language settings, and then click Next.
    e. If you are using the Windows installation disc, click on repair your computer.
    f. Select the Windows installation you want to repair, and then click Next.
    g. in the System Recovery Options menu, click a tool to open it and then choose the system restore and check.
     
    If we are able to boot to the desktop now, I would ask you install the updates one by one andcheck the update is at the origin of the conflict.
     
     
     
    I hope this helps.

    Kind regards
    Support Microsoft Savan-

  • Laptop computer with more than 20% remaining battery stop

    Hello

    I use laptop HP pavilion DVD with the edition Home premium Windows 7 on it. It worked absolutely fine until few months back when he started to close automatically when it is on battery power. Even if the settings are quite correct in advance options power, it most of the time the stop (with any guest) when there is more than 20% battery left.

    Against this behavior suggestions are more than welcome.

    See you soon,.

    Kumar

    Time for a new battery

  • My laptop took more than 12 hours to install an update from windows and is still doing, and will not be closed.

    I use Vista and an HP Pavilion laptop. I noticed the closing down and install updates logo was so I used it and my laptop started to install 2 updates (June 18, 2011). Finished the first, it was install the 2nd for more than 12 hours. The screen tells me not power off or unplug the machine.  The drive light flashes occasionally, it can come entirely for a second or two. What can I do? Surely it's far from since long to be normal and something went wrong.  The laptop keys are unresponsive. The cursor has changed to the blue circle by day and cycles but will not move with the mouse or key.  In the past, some updates took 3-4 hours, they have been great with more than a dozen of components, but never anywhere as long as it. I opened and closed the DVD several times, that works and is empty, just to see if anything's happening. What should I do? Should I continue to wait? If so how long? Can I really just ignore the warnings and turn it off and restart it?

    1. you receive an error message?

    2 did you change on your computer before this problem?

    3. what anti-virus software is installed on your computer?

    I suggest to shut down your computer and try to install the updates manually.

    Method 1

    You can temporarily disable antivirus.

    Disable the antivirus software

    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    Note: after troubleshooting activate the anti-virus software

    Method 2

    You can download and install the update manually failed in a clean boot state.

    Step 1

    Put your computer in a clean boot.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

     

    Note: After a troubleshooting follow step 7: reset the computer to start as usual

    Step 2

    Download and install the KB from the link below.

    Microsoft Download Center

    http://www.Microsoft.com/downloads/en/default.aspx

    See also:

    Problems with installing updates

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    Check whether the problem is resolved.

  • More than 8,000 critical errors on the laptop. What should I do about these?

    Original title: critical errors

    I have more than 8,000 critical errors on my laptop, which, on the contrary, should I do about these?

    Hello

    How do you know that you have these errors?

    If someone called you and told you that, it's a scam.

    If you have downloaded a Tuneup program and he told you that it is a scam.

    We need more information from you to be able to help you.

    "Suggestions for a question on the help forums.

    http://support.Microsoft.com/kb/555375

    See you soon.

Maybe you are looking for

  • ThinkPad W530 - 2447 3U2 - unknown Base system device

    Hi guys, I tried to install a new copy of Windows Enterprise 7 64-bit, in my new laptop. I reinstall all the drivers recommended by lenovo support (all), but in continuous window with message in yellow Device Manager device Base System. Here is the l

  • Iconia W4-820-2671

    Hello I am a new Member, I want to buy me a W4-820-2671 Iconia tablet, I need to go to Germany, it will work in Germany and how do I connect to the Net? I am aware to transformation of 220 V 110 V, anyone know some answers, that I would be really gra

  • Blurry images

    Just bought a new HP PAVILION laptop, running on Vista Home Premium. It worked very well. Then I went to Windows Update and checked to see if she needed anything be it; They recommended 24 updates. (I thought that this computer must have been on the

  • How to disable Passowrd ThinkVantage Manager

    Hi, can someone please advise me how to disable ThinkVantage password manager? Whenever I have connection in some places, the ThinkVantage Password Manager will appear and ask you want to save. Even if I click the button, the next round when I log on

  • How to use the testers on the BlackBerry provider Portal

    Hi all It's a good idea to test your applications before releasing. How can we properly use characteristic of testers on the BlackBerry vendor Portal? Cannot find a help doc. Any information appreciated.