My Sony vio laptop doesn't recognize USB storage?

My Sony vio laptop doesn't recognize USB storage?

Is it a USB 'ding' heard when you insert the USB storage device?  If so, you then have to make right click on my computer, select manage, then disk management, look on the right side and the storage of the assign a drive letter.

Tags: Windows

Similar Questions

  • Laptop doesn't recognize the printer hp officejet laptop connected through ethernet

    New HP Pavilion computer laptop does not recognize my printer HP Officejet Pro L7590 that is connected via ethernet. Also, I have a Comcast modem and could not connect to the printer connected to modem either. Therefore, can not connect via modem or ethernet with the direct printer connection.

    Have you set the printer as the default printer?

  • all of a sudden my laptop doesn't recognize any external storage such as a USB drive and external hard drive...

    It shows:

    This device is not configured correctly. (Code 1)
    Access is denied.
    To find a driver for this device, click Update driver.
    pls help :(

    Did you also remove your battery?
    You have invited tol the driver update, what happened when you click on put updated driver? Error message?

    Try running the Fixit:
    Tips for solving problems of USB devices
    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-device

    If that would not work, go to Device Manager and uninstall (right click, uninstall) all devices under USB controllers. Restart the computer, it must be reinstalled.

    You can also try to go to disk management and see if readers appear, you may just assign drive letters:
    Change, add, or remove a drive letter
    http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

    How to use Vista disk management
    http://www.windowsreference.com/Windows-Vista/how-to-use-disk-management-in-Vista/

  • Satellite A200 doesn't recognize USB input

    My computer does not recognize when I plug in a USB stick or an MP3 player.
    What can I do to fix this?

    Have you tried different USB ports on your laptop?

    What about the USB port State in Device Manager?
    Are there any yellow exclamation marks?
    If you would find any yellow exclamation point in device manager then this would mean that the work of t unit doesn't properly due to a software/hardware problem.
    In most cases, it could be a software problem (driver is not installed correctly, etc.)

    I recommend you this short work around:
    -First disconnect all USB devices
    -go to the Device Manager and remove all USB hubs and USB controllers in device list
    -Close all windows, and then restart the laptop
    -wait until the OS (operating system) is initialized and installed the USB ports.
    -connect a USB device and test

    Good luck

  • Laptop doesn't recognize or read mp3s or CD/DVD!

    I have a laptop Compaq Presario 2200 and I have problems with my laptop recognizing my mp3 player is connected. My computer beeps when its plugged in, but does not appear in the my computer or any other file file at all. I even did a search for mp3 files. He did this with all the mp3s (old and new). Ive tried all the USB ports also. He has also done the same with CD/DVD. Other computers recognize the CD/DVD and mp3s. My laptop has a virus or what?

    Hello Giaboo,

    We have service packs so that we can ensure that the necessary corrective measures are in place.

    If we have a problem with the feature in Windows 7 so we want to make sure that these fixes are in place.

    You can also go to the web site of the manufacturer of the hardware to download drivers updated to the CD player.

    Best regards

    Matthew_Ha

  • Acer aspire 4330 laptop doesn't detect USB HUB under Vista

    Windows vista sp2.  Acer aspire 4330 laptop with intel celeron 575 2.0GHZ 667FSB.  USB hub has power source

    computer will recognize the hard drive or any device on plugin directly from the computer.  I tried unplugging hub and all the rest, stop, turn on and plug in Usb hub with hard drive.  No luck.  off universal host adapters - disaster - froze up was to restore.  Entered the management of feeding and unchecked "turn off hub, if it is in use to save energy" all these tips on the internet, but none worked.  real people need to microsoft, the anonymous general Internet.  asked if faulty usb hub, have a new "brand" on command.  will help isolate prob.  Please notify.

    Create a system restore point and try to disable and re-enable the USB host controllers. I suspect that the USB drive itself is at fault because of the external power supply. I would not exclude the possibility of a hardware failure of the USB. I would check with the manufacturer.

    What to update your chipset drivers? Have you done?

    I wish that you update your chipset and drivers. Die you a hero or you live long enough to become a villain... Black Knight

  • How can I update the BIOS on my Sony Vaio laptop using disc or usb? Note: I can't windows at all.

    Hi, I want to know how can I update the current bios on my sony laptop using the disc or usb.

    I can't access the windows on the laptop at all, because I'm getting STOP: 0 x 00000 "a5 error that says: your bios is not fully compatible with acpi.»
    This error prevents me to access any live disc or recovery disks.
    I would like to learn more about records tho method.
    Thank you.

    Take it to a repair shop, you have damaged the card mother/connections

  • My PC doesn't recognize USB port

    When you try to view or add photos of usb camera device, my pc does not recognize it. Also does not recognize printer

    Hi jeanette,.

    This happens on all USB ports?

    Sometimes the front USB ports do not work, but those in the back will be operational.

    I assume that neither work right now.

    Let's go into the Manager of devices and uninstall/reinstall the USB ports:

    1. Click Start
    2. Right click on my computer
    3. Choose manage
    4. Go to the Device Manager
    5. Right-click each device under Bus USB controllers and choose uninstall.
    6. Close to everything.
    7. Restart the machine.
  • Computer HP laptop doesn't recognize not hard

    Hello

    I have a HP 620 (Pentium D 2, 3 GHz, 1 GB Ram) and it does not recognize the hard drive. The battery does not seem too much work.

    If I try to install Windows, it is said that it found no hard drives. The test of diagnosis in the BIOS says the same thing.

    The DVD player is as ugly as * beep *.

    Do you guys some tips about the cause of this problem.

    System information screenshot below

    You have entered the UEFI PC Diagnostics to see if components tests show the hard drive?

    Considered remove the original hard disk, and then reinstall it and try again see if it is recognized like beong installed?

    You can also put another hard drive to his place to see if it is recognized.

    Is your laptop still under warranty? warranty status

  • More than 54% on my sony vio laptop battery!

    Similar experiences / solutions please?

    First of all, we need the OS name that your system is running. Anyway,.

    Batteries have a load specific cycles and when they are finished, will not charge the battery. Batteries usually wear out after a year or two. Contact the manufacturer for a utility check battery.

  • Computer HP laptop do not recognize the storage of my slate

    Hello

    A few days back one I plugged my slate 7 on my laptop and the storege internal and sd card appear as usual on windows files.  But not the second time. The laptop recognize the 7 slate but it appears as empty and I do not see the storage disk, in fact, I see nothing, just the icon slate on the left side, but when I click on the icon of the slate is ordered.

    Any ideas?  What CASN do see the internal storage and sd card on my laptop again?

    Hello luismonroy, welcome to the HP support community!

    When you are finished with the Slate7 the last time, "eject" the device before unplugging?  Always a good idea.

    I've seen some behavior laminated using my Slate7 and Vista64 laptop.  Tried to switch the setting of the PSG on the Slate7 for 'camera (PTP)', then back for PSG and all stood - main memory and SD card that I had inserted.  This can be found here on the Slate7:

    Storage/settings / < Menu icon, upper right corner > / USB connection

    WyreNut

  • Statellite M100 does not recognize USB storage devices or SD card

    I had problems with my laptop Toshiba Satellite M100 series read don't not Sandisk SD card in the camera to my son - is a 2 GB card and what I read online, maybe that is the problem BUT the laptop is also not reading any of my devices USB "stick". When I insert the SD card or a USB 'stick' he asks me to install the driver software that is simply stupid. I tried to connect the camera via a usb cable too and it does not recognize the device and still once, claims the driver software device.

    I looked on the toshiba site and have installed all updates that I thought may be justified, I'm also trying to run Windows update (at least every 2nd week anyway so it shouldn't be a problem). I am running Vista Home Edition (32 bit). The USB ports have certainly worked in the past, I don't really want to resort to execution of recovery discs if I have as I don't want to lose all the stuff I've stored.

    Question of the SD Card/USB seems to be a common one, but I can't find a specific patch to this topic or any other tech site, any suggestions?

    See you soon

    In your case, I would do two things.

    First: Check if a new BIOS is available. Search on the Toshiba site and do an update.

    Second: Reinstall the laptop with the recovery discs. I know that you will lose all the data, but you can save it to s DVD or external HARD drive.

  • Sansa fuze doesn't recognize the storage capacity all and does not load?

    My 8 gb sansa Fuze only recognizes about 400 MB and will no more. It is just over a year and has worked well before. Nor my sansa fuze or clip will hold most any kind of a charge. The clip is about 2 years old. I recently bought a new computer and I am running windows xp. The two sansas stopped working after I tried to load them into my new pc. What could have caused this and how can I solve this problem? Thank you.

    You can have a file in there that stifles the Sansa, wielding Media update. If it gets stuck, hold the power button and keep it for 20 seconds after the screen turns off.

    Your update is probably spent the USB mode to automatic detection, which will be a PSG connection if it detects Windows 10 or 11 on your computer - but XP comes with WMP 9 unless you have updated, that would send Auto Detect Meteorological Service of the Canada in the event where it is not working properly.

    I suggest reloading the firmware, just in case. Search in the firmware upgrade instructions near the top of the first page of the forum force MSC for the upgrade.

    Then choose a mode - MTP or MSC, depending on what you are used to - rather than the automatic detection function.

    And if it remains stuck, while you are using MSC run Error Correction. Right-click on the drive, properties, tools, error checking. He might find a problem file.

  • Re: DVD recorder has changed and the laptop does not recognize

    I had to change my Toshiba Qosmio F20 portable recorder.
    Now, the computer does not recognize.

    I installed a DVD burner Sony Optiarc AD - 7590 IDE.
    I heard that the problem may be in the BIOS, I have the latest TOSHIBA for this laptop (which is installed V.1.40 2007) and the recorder comes with the manufacturing date of 2009.

    I currently use Windows 7 on this computer.
    Is it only possible for the computer recognizes it, "any driver or driver I install?

    Hello

    Talking about this laptop doesn't recognize, do you mean on the Bios or Device Manager or both?

  • Sony vio can't find the camera after installing Windows 7

    The system does not find the cam into my sony vio laptop once I upgraded from vista to window7

    The system does not find the cam into my sony vio laptop once I upgraded from vista to window7

    And Sony said they supported by your hardware that is found in this system in Windows 7 and they have drivers, that you can download for everything, right?

    Looking for this, right?

    Hardware support always has (probably will be always) come from the hardware manufacturer who has manufactured the product you are trying to use. Whether or not they provide the necessary software (drivers) for their device to be seen and used entirely (if at all) with a given operating system is (has always been) a decision * they * do. The manufacturer of the operating system (except if they are also hardware manufacturer) does not have this choice.

Maybe you are looking for

  • HP Pavilion G6 - 2301 AX: Web cam, sound and brightness of key issues

    Hello I got my hard drive replaced by HP on May 25, 2015 as the laptop is in period of warratny and installed Windows 7 but now I see that my webcam, the volume keys and the brightness keys do not work.  My laptop comes with Windows 8, but I felt unc

  • My built-in webcam does not work on Skype - latest version

    Hello everyone. I hope you can help me. My web cam does not work on Skype. The camera itself works - I checked through Lenovo web conferences. I have attached a txt with the DirectX Diagnostic tool information. I hope you can help me, Skype is really

  • Need help: printing with HP DeskJet 3525 Photo has a light lines @ Inc.

    I have problem with the new printer, Can someone help me because I have just the new printer You can check the result of the printer? We can see light lines, but everyone can see and make it bad. What should I do? because only 1 day buy new printer a

  • Laptop does not not after connected

    My laptop does not respond after that I logged. It shows all icons, the cursor moves, but when I click on any icon it does not at all. And when to stop I have to press the power button / stop. Help, please. Thank you.

  • CIAC 4.0 manual installation, problems with the procedure

    Hi all I m trying to install the latest version of the CIAC and I m facing some problems on the configuration phase. I m using the following document: Cisco_Intelligent_Automation_for_Cloud_4.0_Installation_Guide.PDF Downloaded from the portal of Cis